]> git.sur5r.net Git - u-boot/commitdiff
[PATCH] This patch add varius fix to the ehci.
authormichael <michael@panicking.retis>
Thu, 11 Dec 2008 12:43:55 +0000 (13:43 +0100)
committerRemy Bohmer <linux@bohmer.net>
Wed, 28 Jan 2009 18:57:28 +0000 (19:57 +0100)
- fix ehci_readl, ehci_writel
- introduce new define in ehci.h
- introduce the handshake function for waiting on a register
- fix usb_ehci_fsl with the new HC_LENGTH macro

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
drivers/usb/usb_ehci.h
drivers/usb/usb_ehci_core.c
drivers/usb/usb_ehci_fsl.c
include/usb.h

index 3e7a2ab008a5f4ad242c635bec49c534b7acff03..90b137ad018d0c346a9c8921be7426140fbcdef5 100644 (file)
@@ -45,15 +45,24 @@ struct ehci_hccr {
 #define HC_LENGTH(p)           (((p) >> 0) & 0x00ff)
 #define HC_VERSION(p)          (((p) >> 16) & 0xffff)
        uint32_t cr_hcsparams;
+#define HCS_N_PORTS(p)         (((p) >> 0) & 0xf)
        uint32_t cr_hccparams;
        uint8_t cr_hcsp_portrt[8];
 };
 
 struct ehci_hcor {
        uint32_t or_usbcmd;
-#define CMD_ASE                (1 << 5)
+#define CMD_PARK       (1 << 11)               /* enable "park" */
+#define CMD_PARK_CNT(c)        (((c) >> 8) & 3)        /* how many transfers to park */
+#define CMD_ASE                (1 << 5)                /* async schedule enable */
+#define CMD_LRESET     (1 << 7)                /* partial reset */
+#define CMD_IAAD       (1 << 5)                /* "doorbell" interrupt */
+#define CMD_PSE                (1 << 4)                /* periodic schedule enable */
+#define CMD_RESET      (1 << 1)                /* reset HC not bus */
+#define CMD_RUN                (1 << 0)                /* start/stop HC */
        uint32_t or_usbsts;
 #define        STD_ASS         (1 << 15)
+#define STS_HALT       (1 << 12)
        uint32_t or_usbintr;
        uint32_t or_frindex;
        uint32_t or_ctrldssegment;
@@ -61,10 +70,17 @@ struct ehci_hcor {
        uint32_t or_asynclistaddr;
        uint32_t _reserved_[9];
        uint32_t or_configflag;
+#define FLAG_CF                (1 << 0)        /* true:  we'll support "high speed" */
        uint32_t or_portsc[2];
        uint32_t or_systune;
 };
 
+#define USBMODE                0x68            /* USB Device mode */
+#define USBMODE_SDIS   (1 << 3)        /* Stream disable */
+#define USBMODE_BE     (1 << 2)        /* BE/LE endiannes select */
+#define USBMODE_CM_HC  (3 << 0)        /* host controller mode */
+#define USBMODE_CM_IDLE        (0 << 0)        /* idle state */
+
 /* Interface descriptor */
 struct usb_linux_interface_descriptor {
        unsigned char   bLength;
@@ -91,11 +107,12 @@ struct usb_linux_config_descriptor {
 } __attribute__ ((packed));
 
 #if defined CONFIG_EHCI_DESC_BIG_ENDIAN
-#define        ehci_readl(x)           (x)
-#define ehci_writel(a, b)      (a) = (b)
+#define        ehci_readl(x)           (*((volatile u32 *)(x)))
+#define ehci_writel(a, b)      (*((volatile u32 *)(a)) = ((volatile u32)b))
 #else
-#define ehci_readl(x)          cpu_to_le32((x))
-#define ehci_writel(a, b)      (a) = cpu_to_le32((b))
+#define ehci_readl(x)          cpu_to_le32((*((volatile u32 *)(x))))
+#define ehci_writel(a, b)      (*((volatile u32 *)(a)) = \
+                                       cpu_to_le32(((volatile u32)b)))
 #endif
 
 #if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
index 869bea3e7946428ceddb0f462f7a00f0bda1c886..ec50874f718850dcc2e06c466a4469d78f6b07f0 100644 (file)
@@ -99,8 +99,55 @@ static struct descriptor {
        },
 };
 
-static void ehci_free (void *p, size_t sz)
+static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int msec)
 {
+       uint32_t result;
+       do {
+               result = ehci_readl(ptr);
+               debug("handshake read reg(%x)=%x\n", (uint32_t)ptr, result);
+               if (result == ~(uint32_t)0)
+                       return -1;
+               result &= mask;
+               if (result == done)
+                       return 0;
+               wait_ms(1);
+               msec--;
+       } while (msec > 0);
+       return -1;
+}
+
+static void ehci_free(void *p, size_t sz)
+{
+
+}
+
+static int ehci_reset(void)
+{
+       uint32_t cmd;
+       uint32_t tmp;
+       uint32_t *reg_ptr;
+       int ret = 0;
+
+       cmd = ehci_readl(&hcor->or_usbcmd);
+       cmd |= CMD_RESET;
+       ehci_writel(&hcor->or_usbcmd, cmd);
+       ret = handshake(&hcor->or_usbcmd, CMD_RESET, 0, 250);
+       if (ret < 0) {
+               printf("EHCI fail to reset\n");
+               goto out;
+       }
+
+#if defined CONFIG_EHCI_IS_TDI
+       reg_ptr = (uint32_t *)((u8 *)hcor + USBMODE);
+       tmp = ehci_readl(reg_ptr);
+       tmp |= USBMODE_CM_HC;
+#if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
+       tmp |= USBMODE_BE;
+#endif
+       ehci_writel(reg_ptr, tmp);
+#endif
+out:
+       return ret;
 }
 
 static void *ehci_alloc(size_t sz, size_t align)
@@ -170,6 +217,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
        uint32_t endpt, token, usbsts;
        uint32_t c, toggle;
        uint32_t cmd;
+       uint32_t sts;
 
        debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe,
              buffer, length, req);
@@ -277,16 +325,19 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 
        qh_list.qh_link = cpu_to_hc32((uint32_t) qh | QH_LINK_TYPE_QH);
 
-       usbsts = ehci_readl(hcor->or_usbsts);
-       ehci_writel(hcor->or_usbsts, (usbsts & 0x3f));
+       usbsts = ehci_readl(&hcor->or_usbsts);
+       ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f));
 
        /* Enable async. schedule. */
-       cmd = ehci_readl(hcor->or_usbcmd);
-       hcor->or_usbcmd |= CMD_ASE;
-       ehci_writel(hcor->or_usbcmd, cmd);
-
-       while ((ehci_readl(hcor->or_usbsts) & STD_ASS) == 0)
-               udelay(1);
+       cmd = ehci_readl(&hcor->or_usbcmd);
+       cmd |= CMD_ASE;
+       ehci_writel(&hcor->or_usbcmd, cmd);
+
+       sts = ehci_readl(&hcor->or_usbsts);
+       while ((sts & STD_ASS) == 0) {
+               sts = ehci_readl(&hcor->or_usbsts);
+               udelay(10);
+       }
 
        /* Wait for TDs to be processed. */
        ts = get_timer(0);
@@ -298,11 +349,15 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
        } while (get_timer(ts) < CONFIG_SYS_HZ);
 
        /* Disable async schedule. */
-       cmd = ehci_readl(hcor->or_usbcmd);
+       cmd = ehci_readl(&hcor->or_usbcmd);
        cmd &= ~CMD_ASE;
-       ehci_writel(hcor->or_usbcmd, cmd);
-       while ((ehci_readl(hcor->or_usbsts) & STD_ASS) != 0)
-               udelay(1);
+       ehci_writel(&hcor->or_usbcmd, cmd);
+
+       sts = ehci_readl(&hcor->or_usbsts);
+       while ((sts & STD_ASS) != 0) {
+               sts = ehci_readl(&hcor->or_usbsts);
+               udelay(10);
+       }
 
        qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
 
@@ -335,9 +390,9 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
        } else {
                dev->act_len = 0;
                debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
-                     dev->devnum, ehci_readl(hcor->or_usbsts),
-                     ehci_readl(hcor->or_portsc[0]),
-                     ehci_readl(hcor->or_portsc[1]));
+                     dev->devnum, ehci_readl(&hcor->or_usbsts),
+                     ehci_readl(&hcor->or_portsc[0]),
+                     ehci_readl(&hcor->or_portsc[1]));
        }
 
        return (dev->status != USB_ST_NOT_PROC) ? 0 : -1;
@@ -451,7 +506,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                break;
        case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8):
                memset(tmpbuf, 0, 4);
-               reg = ehci_readl(hcor->or_portsc[le16_to_cpu(req->index)
+               reg = ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index)
                                   - 1]);
                if (reg & EHCI_PS_CS)
                        tmpbuf[0] |= USB_PORT_STAT_CONNECTION;
@@ -479,9 +534,12 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                srclen = 4;
                break;
        case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
-               reg = ehci_readl(hcor->or_portsc[le16_to_cpu(req->index) - 1]);
+               reg = ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index) - 1]);
                reg &= ~EHCI_PS_CLEAR;
                switch (le16_to_cpu(req->value)) {
+               case USB_PORT_FEAT_ENABLE:
+                       reg |= EHCI_PS_PE;
+                       break;
                case USB_PORT_FEAT_POWER:
                        reg |= EHCI_PS_PP;
                        break;
@@ -495,22 +553,22 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                        /* Start reset sequence. */
                        reg &= ~EHCI_PS_PE;
                        reg |= EHCI_PS_PR;
-                       ehci_writel(hcor->or_portsc[
+                       ehci_writel(&hcor->or_portsc[
                                le16_to_cpu(req->index) - 1], reg);
                        /* Wait for reset to complete. */
-                       udelay(500000);
+                       wait_ms(500);
                        /* Terminate reset sequence. */
                        reg &= ~EHCI_PS_PR;
                        /* TODO: is it only fsl chip that requires this
                         * manual setting of port enable?
                         */
                        reg |= EHCI_PS_PE;
-                       ehci_writel(hcor->or_portsc[
+                       ehci_writel(&hcor->or_portsc[
                                le16_to_cpu(req->index) - 1], reg);
                        /* Wait for HC to complete reset. */
-                       udelay(2000);
+                       wait_ms(10);
                        reg =
-                           ehci_readl(hcor->or_portsc[le16_to_cpu(req->index)
+                           ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index)
                                                        - 1]);
                        reg &= ~EHCI_PS_CLEAR;
                        if ((reg & EHCI_PS_PE) == 0) {
@@ -525,10 +583,10 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                        debug("unknown feature %x\n", le16_to_cpu(req->value));
                        goto unknown;
                }
-               ehci_writel(hcor->or_portsc[le16_to_cpu(req->index) - 1], reg);
+               ehci_writel(&hcor->or_portsc[le16_to_cpu(req->index) - 1], reg);
                break;
        case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
-               reg = ehci_readl(hcor->or_portsc[le16_to_cpu(req->index) - 1]);
+               reg = ehci_readl(&hcor->or_portsc[le16_to_cpu(req->index) - 1]);
                reg &= ~EHCI_PS_CLEAR;
                switch (le16_to_cpu(req->value)) {
                case USB_PORT_FEAT_ENABLE:
@@ -537,6 +595,9 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                case USB_PORT_FEAT_C_CONNECTION:
                        reg |= EHCI_PS_CSC;
                        break;
+               case USB_PORT_FEAT_OVER_CURRENT:
+                       reg |= EHCI_PS_OCC;
+                       break;
                case USB_PORT_FEAT_C_RESET:
                        portreset &= ~(1 << le16_to_cpu(req->index));
                        break;
@@ -544,7 +605,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
                        debug("unknown feature %x\n", le16_to_cpu(req->value));
                        goto unknown;
                }
-               ehci_writel(hcor->or_portsc[le16_to_cpu(req->index) - 1], reg);
+               ehci_writel(&hcor->or_portsc[le16_to_cpu(req->index) - 1], reg);
                break;
        default:
                debug("Unknown request\n");
@@ -585,6 +646,10 @@ int usb_lowlevel_init(void)
        if (ehci_hcd_init() != 0)
                return -1;
 
+       /* EHCI spec section 4.1 */
+       if (ehci_reset() != 0)
+               return -1;
+
        /* Set head of reclaim list */
        memset(&qh_list, 0, sizeof(qh_list));
        qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH);
@@ -595,25 +660,31 @@ int usb_lowlevel_init(void)
        qh_list.qh_overlay.qt_token = cpu_to_hc32(0x40);
 
        /* Set async. queue head pointer. */
-       ehci_writel(hcor->or_asynclistaddr, (uint32_t)&qh_list);
+       ehci_writel(&hcor->or_asynclistaddr, (uint32_t)&qh_list);
 
-       reg = ehci_readl(hccr->cr_hcsparams);
-       descriptor.hub.bNbrPorts = reg & 0xf;
-       printf("NbrPorts %x\n", descriptor.hub.bNbrPorts);
+       reg = ehci_readl(&hccr->cr_hcsparams);
+       descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
+       printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
        if (reg & 0x10000)      /* Port Indicators */
                descriptor.hub.wHubCharacteristics |= 0x80;
        if (reg & 0x10)         /* Port Power Control */
                descriptor.hub.wHubCharacteristics |= 0x01;
 
-       /* take control over the ports */
-       cmd = ehci_readl(hcor->or_configflag);
-       cmd |= 1;
-       ehci_writel(hcor->or_configflag, cmd);
-
        /* Start the host controller. */
-       cmd = ehci_readl(hcor->or_configflag);
-       cmd |= 1;
-       ehci_writel(hcor->or_usbcmd, cmd);
+       cmd = ehci_readl(&hcor->or_usbcmd);
+       /* Philips, Intel, and maybe others need CMD_RUN before the
+         * root hub will detect new devices (why?); NEC doesn't */
+       cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+       cmd |= CMD_RUN;
+       ehci_writel(&hcor->or_usbcmd, cmd);
+
+       /* take control over the ports */
+       cmd = ehci_readl(&hcor->or_configflag);
+       cmd |= FLAG_CF;
+       ehci_writel(&hcor->or_configflag, cmd);
+       /* unblock posted writes */
+       cmd = ehci_readl(&hcor->or_usbcmd);
+       wait_ms(5);
 
        rootdev = 0;
 
index 9ca6c562a72125670b563ed3adf3f1640a4c9614..81d5d21657a5296438a1720c28974d995d4f0ff8 100644 (file)
@@ -43,7 +43,8 @@ int ehci_hcd_init(void)
 
        addr = (uint32_t)&(im->usb[0]);
        hccr = (struct ehci_hccr *)(addr + FSL_SKIP_PCI);
-       hcor = (struct ehci_hcor *)((uint32_t) hccr + hccr->cr_caplength);
+       hcor = (struct ehci_hcor *)((uint32_t) hccr +
+                       HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
 
        /* Configure clock */
        clrsetbits_be32(&(im->clk.sccr), MPC83XX_SCCR_USB_MASK,
index cd6f37a197c1dc671dcf7c779a81ae416560987d..b8f2fa256ada4759ef55e5125e53c69dc8eb9f77 100644 (file)
@@ -181,7 +181,7 @@ struct usb_device {
  */
 
 #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
-       defined(CONFI_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
+       defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
        defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
        defined(CONFIG_USB_R8A66597_HCD)