arm64: zynqmp: Remove additional comments from dts files

Remove additional comments which were removed as the part of upstreaming.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
index 0ddb43df6d4f7f3ce5e28edc1aa4fc183da9ba6f..3c2054734c4bda641cd7e5e222e496fb19531b6f 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts
@@ -39,7 +39,6 @@
        };
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 670cc447559cd04b7aba4b879409f9a859707c13..22a3c1ebecccd6cc27f8f1ed783ac408bdf6a05b 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -49,7 +49,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
index 41012fa61de5cc9a9b1b96d74a8bb905f421be95..fb49b4fcb4921e157323e30f5d86f1ead93e6acc 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm018-dc4.dts
@@ -51,7 +51,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
index 99aa74e54e67a17b7d19f3e13140c457db61d4d3..fe737be038f1f40bf0cfa28067ad1d84cd6ca4f3 100644 (file)
--- a/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm019-dc5.dts
@@ -37,7 +37,6 @@
        };
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -83,12 +82,10 @@
        status = "okay";
 };
 
-/* FIXME: Add device */
 &i2c0 {
        status = "okay";
 };
 
-/* FIXME: Add device */
 &i2c1 {
        status = "okay";
 };

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index c9cffc125bfbdcbee63d341a3099b50d88e2b44d..efa94a14194b14ef7cb112bcda7349a42652a1b1 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -77,7 +77,6 @@
        status = "okay";
 };
 
-/* fpd_dma clk 667MHz, lpd_dma 500MHz */
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -381,23 +380,17 @@
                                reg = <0x20>;
                        };
 
-/*                     drivers/hwmon/pmbus/Kconfig:86:   be called max20751.
-drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
-*/
-                       max20751@72 { /* u95 FIXME - not detected */
+                       max20751@72 { /* u95 */
                                compatible = "maxim,max20751";
                                reg = <0x72>;
                        };
-                       max20751@73 { /* u96 FIXME - not detected */
+                       max20751@73 { /* u96 */
                                compatible = "maxim,max20751";
                                reg = <0x73>;
                        };
                };
                /* Bus 3 is not connected */
        };
-
-       /* FIXME PMOD - j160 */
-       /* FIXME MSP430F - u41 - not detected */
 };
 
 &i2c1 {
@@ -409,8 +402,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
        scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
        sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 
-       /* FIXME PL i2c via PCA9306 - u45 */
-       /* FIXME MSP430 - u41 - not detected */
+       /* PL i2c via PCA9306 - u45 */
        i2c-mux@74 { /* u34 */
                compatible = "nxp,pca9548";
                #address-cells = <1>;
@@ -515,24 +507,19 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
                        #size-cells = <0>;
                        reg = <3>;
                        /* DDR4 SODIMM */
-                       dev@19 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@19 {
                                reg = <0x19>;
                        };
-                       dev@30 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@30 {
                                reg = <0x30>;
                        };
-                       dev@35 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@35 {
                                reg = <0x35>;
                        };
-                       dev@36 { /* u-boot detection */
-                               compatible = "xxx";
+                       dev@36 {
                                reg = <0x36>;
                        };
-                       dev@51 { /* u-boot detection - maybe SPD */
-                               compatible = "xxx";
+                       dev@51 {
                                reg = <0x51>;
                        };
                };

diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index 384d0a2a0c128c02bcb4825afd5de21eb293f1fe..af4d86882a5c30611b116abbaa8e4257efc40fbf 100644 (file)
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -26,8 +26,6 @@
        /delete-node/ phy@21;
 };
 
-/* Different qspi 512Mbit version */
-
 /* Fix collision with u61 */
 &i2c0 {
        i2c-mux@75 {