pm9263: init serial console before relocation

The early messages can be seen on the debug console.

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>

diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 59cca87a9b3f982dde715b0020a80e0f151bd18b..1266114aeebca5e0c31bfa31b1ab3d1a079e3592 100644 (file)
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -336,22 +336,28 @@ void lcd_show_board_info(void)
 
 #endif /* CONFIG_LCD */
 
-int board_init(void)
+int board_early_init_f(void)
 {
        struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-       /* Enable Ctrlc */
-       console_init_f();
-
-       writel((1 << ATMEL_ID_PIOA) |
-               (1 << ATMEL_ID_PIOCDE) |
-               (1 << ATMEL_ID_PIOB),
+       /* Enable clocks for all PIOs */
+       writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+               (1 << ATMEL_ID_PIOCDE),
                &pmc->pcer);
 
+       at91_seriald_hw_init();
+
+       return 0;
+}
+
+int board_init(void)
+{
+       /* arch number of AT91SAM9263EK-Board */
+       gd->bd->bi_arch_number = MACH_TYPE_PM9263;
+
        /* adress of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-       at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
        pm9263_nand_hw_init();
 #endif

diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 374be27396fb37724474de47ef773a66dfb12e4d..32c596241a48101082ba55a329b59087f6c72316 100644 (file)
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -172,6 +172,7 @@
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_USER_LOWLEVEL_INIT      1
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers