]> git.sur5r.net Git - u-boot/commitdiff
imx: ventana: config: enable Falcon mode
authorTim Harvey <tharvey@gateworks.com>
Sat, 9 May 2015 01:28:42 +0000 (18:28 -0700)
committerStefano Babic <sbabic@denx.de>
Thu, 21 May 2015 17:07:17 +0000 (19:07 +0200)
Falcon mode entails the SPL booting the OS directly instead of U-Boot.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
board/gateworks/gw_ventana/gw_ventana_spl.c
include/configs/gw_ventana.h

index 2bec428aa11327ec330cfbef7a1e9cb8fd0ac005..9f5d2b17cd09717451b4b211c5591f1a2dfa9ae3 100644 (file)
@@ -14,6 +14,7 @@
 #include <asm/imx-common/boot_mode.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/mxc_i2c.h>
+#include <environment.h>
 #include <spl.h>
 
 #include "gsc.h"
@@ -556,6 +557,25 @@ void spl_board_init(void)
        setup_pmic();
 }
 
+#ifdef CONFIG_SPL_OS_BOOT
+/* return 1 if we wish to boot to uboot vs os (falcon mode) */
+int spl_start_uboot(void)
+{
+       int ret = 1;
+
+       debug("%s\n", __func__);
+#ifdef CONFIG_SPL_ENV_SUPPORT
+       env_init();
+       env_relocate_spec();
+       debug("boot_os=%s\n", getenv("boot_os"));
+       if (getenv_yesno("boot_os") == 1)
+               ret = 0;
+#endif
+       debug("%s booting %s\n", __func__, ret ? "uboot" : "linux");
+       return ret;
+}
+#endif
+
 void reset_cpu(ulong addr)
 {
 }
index 533cbc36e1a011935d80d983eee38cc88b4aba60..7949b125de50213400bab1bd3eae1bf4921fb3f9 100644 (file)
 /* Location in NAND to read U-Boot from */
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
 
+/* Falcon Mode */
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_OS_BOOT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
+#define CONFIG_CMD_SPL_WRITE_SIZE      (128 * SZ_1K)
+
+/* Falcon Mode - NAND support: args@17MB kernel@18MB */
+#define CONFIG_CMD_SPL_NAND_OFS                (17 * SZ_1M)
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        (18 * SZ_1M)
+
+/* Falcon Mode - MMC support: args@1MB kernel@2MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
+
 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
 #include "mx6_common.h"
 #define CONFIG_MX6