LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/spi/libspi_flash.a
LIBS += drivers/net/libnet.a
+LIBS += drivers/net/phy/libphy.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
COBJS-y += lists.o
COBJS-$(CONFIG_LYNXKDI) += lynxkdi.o
COBJS-y += memsize.o
-COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
COBJS-y += miiphyutil.o
COBJS-y += s_record.o
COBJS-y += serial.o
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This provides a bit-banged interface to the ethernet MII management
- * channel.
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <ppc_asm.tmpl>
-
-/*****************************************************************************
- *
- * Utility to send the preamble, address, and register (common to read
- * and write).
- */
-static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
-{
- int j; /* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
- volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
-#endif
-
- /*
- * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
- * The IEEE spec says this is a PHY optional requirement. The AMD
- * 79C874 requires one after power up and one after a MII communications
- * error. This means that we are doing more preambles than we need,
- * but it is safer and will be much more robust.
- */
-
- MDIO_ACTIVE;
- MDIO (1);
- for (j = 0; j < 32; j++) {
- MDC (0);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- }
-
- /* send the start bit (01) and the read opcode (10) or write (10) */
- MDC (0);
- MDIO (0);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- MDC (0);
- MDIO (1);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- MDC (0);
- MDIO (read);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- MDC (0);
- MDIO (!read);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
-
- /* send the PHY address */
- for (j = 0; j < 5; j++) {
- MDC (0);
- if ((addr & 0x10) == 0) {
- MDIO (0);
- } else {
- MDIO (1);
- }
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- addr <<= 1;
- }
-
- /* send the register address */
- for (j = 0; j < 5; j++) {
- MDC (0);
- if ((reg & 0x10) == 0) {
- MDIO (0);
- } else {
- MDIO (1);
- }
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- reg <<= 1;
- }
-}
-
-
-/*****************************************************************************
- *
- * Read a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-int bb_miiphy_read (char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- short rdreg; /* register working value */
- int j; /* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
- volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
-#endif
-
- miiphy_pre (1, addr, reg);
-
- /* tri-state our MDIO I/O pin so we can read */
- MDC (0);
- MDIO_TRISTATE;
- MIIDELAY;
- MDC (1);
- MIIDELAY;
-
- /* check the turnaround bit: the PHY should be driving it to zero */
- if (MDIO_READ != 0) {
- /* puts ("PHY didn't drive TA low\n"); */
- for (j = 0; j < 32; j++) {
- MDC (0);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- }
- return (-1);
- }
-
- MDC (0);
- MIIDELAY;
-
- /* read 16 bits of register data, MSB first */
- rdreg = 0;
- for (j = 0; j < 16; j++) {
- MDC (1);
- MIIDELAY;
- rdreg <<= 1;
- rdreg |= MDIO_READ;
- MDC (0);
- MIIDELAY;
- }
-
- MDC (1);
- MIIDELAY;
- MDC (0);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
-
- *value = rdreg;
-
-#ifdef DEBUG
- printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
-#endif
-
- return 0;
-}
-
-
-/*****************************************************************************
- *
- * Write a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-int bb_miiphy_write (char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- int j; /* counter */
-#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
- volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
-#endif
-
- miiphy_pre (0, addr, reg);
-
- /* send the turnaround (10) */
- MDC (0);
- MDIO (1);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- MDC (0);
- MDIO (0);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
-
- /* write 16 bits of register data, MSB first */
- for (j = 0; j < 16; j++) {
- MDC (0);
- if ((value & 0x00008000) == 0) {
- MDIO (0);
- } else {
- MDIO (1);
- }
- MIIDELAY;
- MDC (1);
- MIIDELAY;
- value <<= 1;
- }
-
- /*
- * Tri-state the MDIO line.
- */
- MDIO_TRISTATE;
- MDC (0);
- MIIDELAY;
- MDC (1);
- MIIDELAY;
-
- return 0;
-}
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libphy.a
+
+COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This provides a bit-banged interface to the ethernet MII management
+ * channel.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <ppc_asm.tmpl>
+
+/*****************************************************************************
+ *
+ * Utility to send the preamble, address, and register (common to read
+ * and write).
+ */
+static void miiphy_pre (char read, unsigned char addr, unsigned char reg)
+{
+ int j; /* counter */
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
+ volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+#endif
+
+ /*
+ * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
+ * The IEEE spec says this is a PHY optional requirement. The AMD
+ * 79C874 requires one after power up and one after a MII communications
+ * error. This means that we are doing more preambles than we need,
+ * but it is safer and will be much more robust.
+ */
+
+ MDIO_ACTIVE;
+ MDIO (1);
+ for (j = 0; j < 32; j++) {
+ MDC (0);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ MDC (0);
+ MDIO (0);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ MDC (0);
+ MDIO (1);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ MDC (0);
+ MDIO (read);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ MDC (0);
+ MDIO (!read);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+
+ /* send the PHY address */
+ for (j = 0; j < 5; j++) {
+ MDC (0);
+ if ((addr & 0x10) == 0) {
+ MDIO (0);
+ } else {
+ MDIO (1);
+ }
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for (j = 0; j < 5; j++) {
+ MDC (0);
+ if ((reg & 0x10) == 0) {
+ MDIO (0);
+ } else {
+ MDIO (1);
+ }
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ reg <<= 1;
+ }
+}
+
+
+/*****************************************************************************
+ *
+ * Read a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+int bb_miiphy_read (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value)
+{
+ short rdreg; /* register working value */
+ int j; /* counter */
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
+ volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+#endif
+
+ miiphy_pre (1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ MDC (0);
+ MDIO_TRISTATE;
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+
+ /* check the turnaround bit: the PHY should be driving it to zero */
+ if (MDIO_READ != 0) {
+ /* puts ("PHY didn't drive TA low\n"); */
+ for (j = 0; j < 32; j++) {
+ MDC (0);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ }
+ return (-1);
+ }
+
+ MDC (0);
+ MIIDELAY;
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for (j = 0; j < 16; j++) {
+ MDC (1);
+ MIIDELAY;
+ rdreg <<= 1;
+ rdreg |= MDIO_READ;
+ MDC (0);
+ MIIDELAY;
+ }
+
+ MDC (1);
+ MIIDELAY;
+ MDC (0);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+
+ *value = rdreg;
+
+#ifdef DEBUG
+ printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value);
+#endif
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ *
+ * Write a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+int bb_miiphy_write (char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value)
+{
+ int j; /* counter */
+#if !(defined(CONFIG_EP8248) || defined(CONFIG_EP82XXM))
+ volatile ioport_t *iop = ioport_addr ((immap_t *) CFG_IMMR, MDIO_PORT);
+#endif
+
+ miiphy_pre (0, addr, reg);
+
+ /* send the turnaround (10) */
+ MDC (0);
+ MDIO (1);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ MDC (0);
+ MDIO (0);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+
+ /* write 16 bits of register data, MSB first */
+ for (j = 0; j < 16; j++) {
+ MDC (0);
+ if ((value & 0x00008000) == 0) {
+ MDIO (0);
+ } else {
+ MDIO (1);
+ }
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ MDIO_TRISTATE;
+ MDC (0);
+ MIIDELAY;
+ MDC (1);
+ MIIDELAY;
+
+ return 0;
+}
projects / u-boot / commitdiff