e1000: fix unused variable waring for e1000 driver

Fix the following build warning in drivers/net/e1000.c

e1000.c: In function 'e1000_reset_hw':
e1000.c:1373:11: warning: variable 'icr' set but not used [-Wunused-but-set-variable]
e1000.c: In function 'e1000_phy_init_script':
e1000.c:4395:11: warning: variable 'ret_val' set but not used [-Wunused-but-set-variable]

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Kyle Moffett <Kyle.D.Moffett@boeing.com>

diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 6eab7b2cfb091b1e9a4f6135435fa141d9ec9c22..6b71bd901e22871c5cf2905966fd458d9620333f 100644 (file)
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -1370,7 +1370,6 @@ e1000_reset_hw(struct e1000_hw *hw)
 {
        uint32_t ctrl;
        uint32_t ctrl_ext;
-       uint32_t icr;
        uint32_t manc;
        uint32_t pba = 0;
 
@@ -1443,7 +1442,7 @@ e1000_reset_hw(struct e1000_hw *hw)
        E1000_WRITE_REG(hw, IMC, 0xffffffff);
 
        /* Clear any pending interrupt events. */
-       icr = E1000_READ_REG(hw, ICR);
+       E1000_READ_REG(hw, ICR);
 
        /* If MWI was previously enabled, reenable it. */
        if (hw->mac_type == e1000_82542_rev2_0) {
@@ -4447,7 +4446,8 @@ e1000_phy_init_script(struct e1000_hw *hw)
                mdelay(20);
 
                /* Now enable the transmitter */
-               e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+               if (!ret_val)
+                       e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
 
                if (hw->mac_type == e1000_82547) {
                        uint16_t fused, fine, coarse;