So far, only the BAB7xx board would call the initialise_w83c553f()
function for the WINBOND 83C553 chip, even though some other boards
(HIDDEN_DRAGON, Sandpoint8240, Sandpoint8245) enabled it in their
board configuration.  These boards were also missing other config
settings needed for that, which resulted in build errors like this:
drivers/pci/libpci.o:(.got2+0x84): undefined reference to `ide_bus_offset'
Switch arch/powerpc/lib/board.c to call initialise_w83c553f() not on a
per-board base, but when a WINBOND_83C553 in enabled in a
configuration (like BAB7xx), and disable it in the boards that had
this set so far.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Yusdi Santoso <yusdi_santoso@adaptec.com>
Cc: Jim Thompson <jim@musenki.com>
Acked-by: Stefan Roese <sr@denx.de>
         */
        pci_init ();
 #endif
-#if defined(CONFIG_BAB7xx)
+#if defined(CONFIG_WINBOND_83C553)
        /*
         * Initialise the ISA bridge
         */
 
  */
 
 
-#define CONFIG_WINBOND_83C553  1       /*has a winbond bridge                  */
+/* #define CONFIG_WINBOND_83C553       1       / *has a winbond bridge                 */
 #define CONFIG_SYS_USE_WINBOND_IDE     0       /*use winbond 83c553 internal IDE ctrlr */
 #define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800  /*pci-isa bridge config addr    */
 #define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900  /*ide config addr               */
 
  */
 
 
-#define CONFIG_WINBOND_83C553  1       /*has a winbond bridge                  */
+/* #define CONFIG_WINBOND_83C553       1       / *has a winbond bridge                 */
 #define CONFIG_SYS_USE_WINBOND_IDE     0       /*use winbond 83c553 internal IDE ctrlr */
 #define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800  /*pci-isa bridge config addr    */
 #define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900  /*ide config addr               */
 
  */
 
 
-#define CONFIG_WINBOND_83C553  1       /*has a winbond bridge                  */
+/* #define CONFIG_WINBOND_83C553       1       / *has a winbond bridge                 */
 #define CONFIG_SYS_USE_WINBOND_IDE     0       /*use winbond 83c553 internal IDE ctrlr */
 #define CONFIG_SYS_WINBOND_ISA_CFG_ADDR    0x80005800  /*pci-isa bridge config addr    */
 #define CONFIG_SYS_WINBOND_IDE_CFG_ADDR    0x80005900  /*ide config addr               */