Changes since U-Boot 0.3.1:
======================================================================
+* Patch by Murray Jensen, 20 Jun 2003:
+ - hymod update
+ - cleanup (especially for gcc-3.x compilers)
+
* Patch by Tom Guilliams, 20 Jun 2003:
added CONFIG_750FX support for IBM 750FX processors
#########################################################################
LIST_824x=" \
- A3000 BMW CPC45 CU824 \
- MOUSSE MUSENKI OXC PN62 \
- Sandpoint8240 Sandpoint8245 utx8245 \
+ A3000 BMW CPC45 CU824 \
+ MOUSSE MUSENKI OXC PN62 \
+ Sandpoint8240 Sandpoint8245 utx8245 \
"
-x
+
#########################################################################
## MPC8260 Systems (includes 8250, 8255 etc.)
#########################################################################
TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)
OBJCFLAGS = --remove-section=.ppcenv
unsigned dev_addr = CFG_I2C_EEPROM_ADDR | \
(which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
unsigned offset = 0;
- uchar data[HYMOD_EEPROM_SIZE], *dp, *edp;
- hymod_eehdr_t *hp;
+ uchar data[HYMOD_EEPROM_MAXLEN], *dp, *edp;
+ hymod_eehdr_t hdr;
ulong len, crc;
memset (ep, 0, sizeof *ep);
- memset (data, 0, HYMOD_EEPROM_SIZE);
- crc = 0;
- hp = (hymod_eehdr_t *)data;
- eeprom_read (dev_addr, offset, (uchar *)hp, sizeof (*hp));
- offset += sizeof (*hp);
+ eeprom_read (dev_addr, offset, (uchar *)&hdr, sizeof (hdr));
+ offset += sizeof (hdr);
- if (hp->id != HYMOD_EEPROM_ID || hp->ver > HYMOD_EEPROM_VER ||
- (len = hp->len) > HYMOD_EEPROM_MAXLEN)
+ if (hdr.id != HYMOD_EEPROM_ID || hdr.ver > HYMOD_EEPROM_VER ||
+ (len = hdr.len) > HYMOD_EEPROM_MAXLEN)
return (0);
- dp = (uchar *)(hp + 1); edp = dp + len;
- eeprom_read (dev_addr, offset, dp, len);
+ eeprom_read (dev_addr, offset, data, len);
offset += len;
eeprom_read (dev_addr, offset, (uchar *)&crc, sizeof (ulong));
+ offset += sizeof (ulong);
- if (crc32 (0, data, edp - data) != crc)
+ if (crc32 (crc32 (0, (char *)&hdr, sizeof hdr), data, len) != crc)
return (0);
- ep->ver = hp->ver;
+ ep->ver = hdr.ver;
+ dp = data; edp = dp + len;
for (;;) {
- hymod_eerec_t *rp = (hymod_eerec_t *)dp;
ulong rtyp;
uchar rlen, *rdat;
- uint rsiz;
- if (rp->small.topbit == 0) {
- rtyp = rp->small.type;
- rlen = rp->small.len;
- rdat = rp->small.data;
- rsiz = offsetof (hymod_eerec_t, small.data) + rlen;
- }
- else if (rp->medium.nxtbit == 0) {
- rtyp = rp->medium.type;
- rlen = rp->medium.len;
- rdat = rp->medium.data;
- rsiz = offsetof (hymod_eerec_t, medium.data) + rlen;
- }
+ rtyp = *dp++;
+ if ((rtyp & 0x80) == 0)
+ rlen = *dp++;
else {
- rtyp = rp->large.type;
- rlen = rp->large.len;
- rdat = rp->large.data;
- rsiz = offsetof (hymod_eerec_t, large.data) + rlen;
+ uchar islarge = rtyp & 0x40;
+
+ rtyp = ((rtyp & 0x3f) << 8) | *dp++;
+ if (islarge) {
+ rtyp = (rtyp << 8) | *dp++;
+ rtyp = (rtyp << 8) | *dp++;
+ }
+
+ rlen = *dp++;
+ rlen = (rlen << 8) | *dp++;
+ if (islarge) {
+ rlen = (rlen << 8) | *dp++;
+ rlen = (rlen << 8) | *dp++;
+ }
}
if (rtyp == 0)
break;
- dp += rsiz;
+ rdat = dp;
+ dp += rlen;
+
if (dp > edp) /* error? */
break;
case HYMOD_EEREC_SERNO: /* serial number */
if (rlen == sizeof (ulong))
- memcpy (&ep->serno, rdat, sizeof (ulong));
+ ep->serno = \
+ ((ulong)rdat[0] << 24) | \
+ ((ulong)rdat[1] << 16) | \
+ ((ulong)rdat[2] << 8) | \
+ (ulong)rdat[3];
break;
case HYMOD_EEREC_DATE: /* date */
- if (rlen == sizeof (hymod_date_t))
- memcpy (&ep->date, rdat, sizeof (hymod_date_t));
+ if (rlen == sizeof (hymod_date_t)) {
+ ep->date.year = ((ushort)rdat[0] << 8) | \
+ (ushort)rdat[1];
+ ep->date.month = rdat[2];
+ ep->date.day = rdat[3];
+ }
break;
case HYMOD_EEREC_BATCH: /* batch */
static uchar *
uint_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
{
- uchar *eval;
- union {
- uchar cval[4];
- ushort sval[2];
- ulong lval;
- } rdata;
+ char *eval;
+ ulong lval;
- rdata.lval = simple_strtol (val, (char **)&eval, 10);
+ lval = simple_strtol (val, &eval, 10);
- if (eval == val || *eval != '\0') {
- printf ("%s rec (%s) is not a valid uint\n",
- rp->name, val);
+ if ((uchar *)eval == val || *eval != '\0') {
+ printf ("%s rec (%s) is not a valid uint\n", rp->name, val);
return (NULL);
}
switch (rp->length) {
case 1:
- if (rdata.lval >= 256) {
+ if (lval >= 256) {
printf ("%s rec value (%lu) out of range (0-255)\n",
- rp->name, rdata.lval);
+ rp->name, lval);
return (NULL);
}
- *dp++ = rdata.cval[3];
+ *dp++ = lval;
break;
case 2:
- if (rdata.lval >= 65536) {
+ if (lval >= 65536) {
printf ("%s rec value (%lu) out of range (0-65535)\n",
- rp->name, rdata.lval);
+ rp->name, lval);
return (NULL);
}
- memcpy (dp, &rdata.sval[1], 2);
- dp += 2;
+ *dp++ = lval >> 8;
+ *dp++ = lval;
break;
case 4:
- memcpy (dp, &rdata.lval, 4);
- dp += 4;
+ *dp++ = lval >> 24;
+ *dp++ = lval >> 16;
+ *dp++ = lval >> 8;
+ *dp++ = lval;
break;
default:
date_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
{
hymod_date_t date;
- uchar *p = val, *ep;
+ uchar *p = val;
+ char *ep;
+ ulong lval;
- date.year = simple_strtol (p, (char **)&ep, 10);
- if (ep == p || *ep++ != '-') {
+ lval = simple_strtol (p, &ep, 10);
+ if ((uchar *)ep == p || *ep++ != '-') {
bad_date:
printf ("%s rec (%s) is not a valid date\n", rp->name, val);
return (NULL);
}
+ if (lval >= 65536)
+ goto bad_date;
+ date.year = lval;
- date.month = simple_strtol (p = ep, (char **)&ep, 10);
- if (ep == p || *ep++ != '-' || date.month == 0 || date.month > 12)
+ lval = simple_strtol (p = ep, &ep, 10);
+ if ((uchar *)ep == p || *ep++ != '-' || lval == 0 || lval > 12)
goto bad_date;
+ date.month = lval;
- date.day = simple_strtol (p = ep, (char **)&ep, 10);
- if (ep == p || *ep != '\0' || date.day == 0 || date.day > 31)
+ lval = simple_strtol (p = ep, &ep, 10);
+ if ((uchar *)ep == p || *ep != '\0' || lval == 0 || lval > 31)
goto bad_date;
+ date.day = lval;
- if (dp + 2 + sizeof (hymod_date_t) > edp) {
+ if (dp + 2 + rp->length > edp) {
printf ("can't fit %s rec into eeprom\n", rp->name);
return (NULL);
}
*dp++ = rp->type;
- *dp++ = sizeof (hymod_date_t);
- memcpy (dp, &date, sizeof (hymod_date_t));
- dp += sizeof (hymod_date_t);
+ *dp++ = rp->length;
+ *dp++ = date.year >> 8;
+ *dp++ = date.year;
+ *dp++ = date.month;
+ *dp++ = date.day;
return (dp);
}
static uchar *
bytes_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
{
- uchar bytes[HYMOD_MAX_BYTES], nbytes = 0;
- uchar *p = val, *ep;
+ uchar bytes[HYMOD_MAX_BYTES], nbytes, *p;
+ char *ep;
- for (;;) {
+ for (nbytes = 0, p = val; *p != '\0'; p = (uchar *)ep) {
+ ulong lval;
- if (nbytes >= HYMOD_MAX_BYTES) {
- printf ("%s rec (%s) byte array too long\n",
+ lval = simple_strtol (p, &ep, 10);
+ if ((uchar *)ep == p || (*ep != '\0' && *ep != ',') || \
+ lval >= 256) {
+ printf ("%s rec (%s) byte array has invalid uint\n",
rp->name, val);
return (NULL);
}
-
- bytes[nbytes++] = simple_strtol (p, (char **)&ep, 10);
-
- if (ep == p || (*ep != '\0' && *ep != ',')) {
- printf ("%s rec (%s) byte array has invalid uint\n",
+ if (nbytes >= HYMOD_MAX_BYTES) {
+ printf ("%s rec (%s) byte array too long\n",
rp->name, val);
return (NULL);
}
+ bytes[nbytes++] = lval;
- if (*ep++ == '\0')
- break;
-
- p = ep;
+ if (*ep != '\0')
+ ep++;
}
if (dp + 2 + nbytes > edp) {
hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
ulong crc;
+ memset (hp, 0, sizeof *hp);
hp->id = HYMOD_EEPROM_ID;
hp->ver = HYMOD_EEPROM_VER;
* in the flash_info entry "fip". Fatal error if nothing there.
*/
static void
-bank_probe (flash_info_t *fip, bank_addr_t base)
+bank_probe (flash_info_t *fip, volatile bank_addr_t base)
{
- bank_addr_t addr;
+ volatile bank_addr_t addr;
bank_word_t word;
int i;
/* reset the flash */
*base = BANK_CMD_RST;
- /* check the manufacturer id - must be intel */
+ /* put flash into read id mode */
*base = BANK_CMD_RD_ID;
- word = *BANK_REG_MAN_CODE (base);
- *base = BANK_CMD_RST;
+ /* check the manufacturer id - must be intel */
+ word = *BANK_REG_MAN_CODE (base);
if (word != BANK_FILL_WORD (INTEL_MANUFACT&0xff))
panic ("\nbad manufacturer's code (0x%08lx) at addr 0x%08lx",
(unsigned long)word, (unsigned long)base);
/* check the device id */
- *base = BANK_CMD_RD_ID;
word = *BANK_REG_DEV_CODE (base);
- *base = BANK_CMD_RST;
-
switch (word) {
case BANK_FILL_WORD (INTEL_ID_28F320J5&0xff):
}
fip->size = (bank_size_t)addr - (bank_size_t)base;
+
+ /* reset the flash */
+ *base = BANK_CMD_RST;
}
static void
bank_reset (flash_info_t *info, int sect)
{
- bank_addr_t addr = (bank_addr_t)info->start[sect];
+ volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
#ifdef FLASH_DEBUG
printf ("writing reset cmd to addr 0x%08lx\n", (unsigned long)addr);
static void
bank_erase_init (flash_info_t *info, int sect)
{
- bank_addr_t addr = (bank_addr_t)info->start[sect];
+ volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
int flag;
#ifdef FLASH_DEBUG
static int
bank_erase_poll (flash_info_t *info, int sect)
{
- bank_addr_t addr = (bank_addr_t)info->start[sect];
+ volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
bank_word_t stat = *addr;
#ifdef FLASH_DEBUG
}
static int
-bank_write_word (bank_addr_t addr, bank_word_t value)
+bank_write_word (volatile bank_addr_t addr, bank_word_t value)
{
bank_word_t stat;
ulong start;
#endif /* EXAMPLE */
/* the sizes of these two types should probably be the same */
-typedef volatile bank_word_t *bank_addr_t;
+typedef bank_word_t *bank_addr_t;
typedef unsigned long bank_size_t;
/* align bank addresses and sizes to bank word boundaries */
# MISCELLANEOUS PARAMETERS
# version must always come first
-version=3
+version=4
# set the ip address based on the main board serial number
ipaddr=192.168.1.%S
# BOOTING COMMANDS AND PARAMETERS
# command to run when "auto-booting"
-bootcmd=bootm 40080000 40200000
+bootcmd=bootm 40080000
# how long the "countdown" to automatically running "bootcmd" is
bootdelay=2
# r4 - address of initial ramdisk image (0 means no initrd)
# r5 - size of initial ramdisk image
# r6 - address of command line string
--bootargs=root=/dev/ram rw
+-bootargs=root=/dev/mtdblock5 rootfstype=squashfs ro
-# these four are for hymod linux intergrated into our Sun network
+# these four are for hymod linux integrated into our Sun network
bootargs+=serialno=%S
bootargs+=nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4
bootargs+=nfsclient
cmpaltlinux=cmp.b 100000 40140000 $(filesize)
newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux
-fetchird=tftp 100000 /hymod/initrd.bin
-eraseird=erase 1:8-47
-copyird=cp.b 100000 40200000 $(filesize)
-cmpird=cmp.b 100000 40200000 $(filesize)
-newinitrd=run fetchird eraseird copyird cmpird
+fetchroot=tftp 100000 /hymod/root.bin
+eraseroot=erase 1:8-47
+copyroot=cp.b 100000 40200000 $(filesize)
+cmproot=cmp.b 100000 40200000 $(filesize)
+newroot=run fetchroot eraseroot copyroot cmproot
fetchard=tftp 100000 /hymod/apprd.bin
eraseard=erase 1:48-63
copyard=cp.b 100000 40c00000 $(filesize)
cmpard=cmp.b 100000 40c00000 $(filesize)
newapprd=run fetchard eraseard copyard cmpard
+
+# pass above map to linux mtd driver
+bootargs+=mtdparts=phys:256k(u-boot),256k(u-boot-env),768k(linux),768k(altlinux),10m(root),4m(hymod)
#########################################################################
+# clean the slate ...
+PLATFORM_RELFLAGS =
+PLATFORM_CPPFLAGS =
+PLATFORM_LDFLAGS =
+
#
# When cross-compiling on NetBSD, we have to define __PPC__ or else we
# will pick up a va_list declaration that is incompatible with the
PLATFORM_RELFLAGS += -mrelocatable -ffixed-r14 -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_8260 -ffixed-r2 -ffixed-r29 -mstring
-##PLATFORM_CPPFLAGS += -DCONFIG_8260 -ffixed-r2 -mstring
+PLATFORM_CPPFLAGS += -DCONFIG_8260 -ffixed-r2 -ffixed-r29 \
+ -mstring -mcpu=603e -mmultiple
/*
* Configurable monitor commands
*/
-#define CFG_CMD_BDI 0x00000001 /* bdinfo */
-#define CFG_CMD_LOADS 0x00000002 /* loads */
-#define CFG_CMD_LOADB 0x00000004 /* loadb */
-#define CFG_CMD_IMI 0x00000008 /* iminfo */
-#define CFG_CMD_CACHE 0x00000010 /* icache, dcache */
-#define CFG_CMD_FLASH 0x00000020 /* flinfo, erase, protect */
-#define CFG_CMD_MEMORY 0x00000040 /* md, mm, nm, mw, cp, cmp, */
+#define CFG_CMD_BDI 0x00000001U /* bdinfo */
+#define CFG_CMD_LOADS 0x00000002U /* loads */
+#define CFG_CMD_LOADB 0x00000004U /* loadb */
+#define CFG_CMD_IMI 0x00000008U /* iminfo */
+#define CFG_CMD_CACHE 0x00000010U /* icache, dcache */
+#define CFG_CMD_FLASH 0x00000020U /* flinfo, erase, protect */
+#define CFG_CMD_MEMORY 0x00000040U /* md, mm, nm, mw, cp, cmp, */
/* crc, base, loop, mtest */
-#define CFG_CMD_NET 0x00000080 /* bootp, tftpboot, rarpboot */
-#define CFG_CMD_ENV 0x00000100 /* saveenv */
-#define CFG_CMD_KGDB 0x00000200 /* kgdb */
-#define CFG_CMD_PCMCIA 0x00000400 /* PCMCIA support */
-#define CFG_CMD_IDE 0x00000800 /* IDE harddisk support */
-#define CFG_CMD_PCI 0x00001000 /* pciinfo */
-#define CFG_CMD_IRQ 0x00002000 /* irqinfo */
-#define CFG_CMD_BOOTD 0x00004000 /* bootd */
-#define CFG_CMD_CONSOLE 0x00008000 /* coninfo */
-#define CFG_CMD_EEPROM 0x00010000 /* EEPROM read/write support */
-#define CFG_CMD_ASKENV 0x00020000 /* ask for env variable */
-#define CFG_CMD_RUN 0x00040000 /* run command in env variable */
-#define CFG_CMD_ECHO 0x00080000 /* echo arguments */
-#define CFG_CMD_I2C 0x00100000 /* I2C serial bus support */
-#define CFG_CMD_REGINFO 0x00200000 /* Register dump */
-#define CFG_CMD_IMMAP 0x00400000 /* IMMR dump support */
-#define CFG_CMD_DATE 0x00800000 /* support for RTC, date/time...*/
-#define CFG_CMD_DHCP 0x01000000 /* DHCP Support */
-#define CFG_CMD_BEDBUG 0x02000000 /* Include BedBug Debugger */
-#define CFG_CMD_FDC 0x04000000 /* Floppy Disk Support */
-#define CFG_CMD_SCSI 0x08000000 /* SCSI Support */
-#define CFG_CMD_AUTOSCRIPT 0x10000000 /* Autoscript Support */
-#define CFG_CMD_MII 0x20000000 /* MII support */
-#define CFG_CMD_SETGETDCR 0x40000000 /* DCR support on 4xx */
-#define CFG_CMD_BSP 0x80000000 /* Board Specific functions */
-
-#define CFG_CMD_ELF 0x0000000100000000 /* ELF (VxWorks) load/boot cmd */
-#define CFG_CMD_MISC 0x0000000200000000 /* Misc functions like sleep etc*/
-#define CFG_CMD_USB 0x0000000400000000 /* USB Support */
-#define CFG_CMD_DOC 0x0000000800000000 /* Disk-On-Chip Support */
-#define CFG_CMD_JFFS2 0x0000001000000000 /* JFFS2 Support */
-#define CFG_CMD_DTT 0x0000002000000000 /* Digital Therm and Thermostat */
-#define CFG_CMD_SDRAM 0x0000004000000000 /* SDRAM DIMM SPD info printout */
-#define CFG_CMD_DIAG 0x0000008000000000 /* Diagnostics */
-#define CFG_CMD_FPGA 0x0000010000000000 /* FPGA configuration Support */
-#define CFG_CMD_HWFLOW 0x0000020000000000 /* RTS/CTS hw flow control */
-#define CFG_CMD_SAVES 0x0000040000000000 /* save S record dump */
-#define CFG_CMD_SPI 0x0000100000000000 /* SPI utility */
-#define CFG_CMD_FDOS 0x0000200000000000 /* Floppy DOS support */
-#define CFG_CMD_VFD 0x0000400000000000 /* VFD support (TRAB) */
-#define CFG_CMD_NAND 0x0000800000000000 /* NAND support */
-#define CFG_CMD_BMP 0x0001000000000000 /* BMP support */
-#define CFG_CMD_PORTIO 0x0002000000000000 /* Port I/O */
-#define CFG_CMD_PING 0x0004000000000000 /* ping support */
-#define CFG_CMD_MMC 0x0008000000000000 /* MMC support */
-#define CFG_CMD_FAT 0x0010000000000000 /* FAT support */
-
-#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */
+#define CFG_CMD_NET 0x00000080U /* bootp, tftpboot, rarpboot */
+#define CFG_CMD_ENV 0x00000100U /* saveenv */
+#define CFG_CMD_KGDB 0x00000200U /* kgdb */
+#define CFG_CMD_PCMCIA 0x00000400U /* PCMCIA support */
+#define CFG_CMD_IDE 0x00000800U /* IDE harddisk support */
+#define CFG_CMD_PCI 0x00001000U /* pciinfo */
+#define CFG_CMD_IRQ 0x00002000U /* irqinfo */
+#define CFG_CMD_BOOTD 0x00004000U /* bootd */
+#define CFG_CMD_CONSOLE 0x00008000U /* coninfo */
+#define CFG_CMD_EEPROM 0x00010000U /* EEPROM read/write support */
+#define CFG_CMD_ASKENV 0x00020000U /* ask for env variable */
+#define CFG_CMD_RUN 0x00040000U /* run command in env variable */
+#define CFG_CMD_ECHO 0x00080000U /* echo arguments */
+#define CFG_CMD_I2C 0x00100000U /* I2C serial bus support */
+#define CFG_CMD_REGINFO 0x00200000U /* Register dump */
+#define CFG_CMD_IMMAP 0x00400000U /* IMMR dump support */
+#define CFG_CMD_DATE 0x00800000U /* support for RTC, date/time...*/
+#define CFG_CMD_DHCP 0x01000000U /* DHCP Support */
+#define CFG_CMD_BEDBUG 0x02000000U /* Include BedBug Debugger */
+#define CFG_CMD_FDC 0x04000000U /* Floppy Disk Support */
+#define CFG_CMD_SCSI 0x08000000U /* SCSI Support */
+#define CFG_CMD_AUTOSCRIPT 0x10000000U /* Autoscript Support */
+#define CFG_CMD_MII 0x20000000U /* MII support */
+#define CFG_CMD_SETGETDCR 0x40000000U /* DCR support on 4xx */
+#define CFG_CMD_BSP 0x80000000U /* Board Specific functions */
+
+#define CFG_CMD_ELF 0x0000000100000000U /* ELF (VxWorks) load/boot cmd */
+#define CFG_CMD_MISC 0x0000000200000000U /* Misc functions like sleep etc*/
+#define CFG_CMD_USB 0x0000000400000000U /* USB Support */
+#define CFG_CMD_DOC 0x0000000800000000U /* Disk-On-Chip Support */
+#define CFG_CMD_JFFS2 0x0000001000000000U /* JFFS2 Support */
+#define CFG_CMD_DTT 0x0000002000000000U /* Digital Therm and Thermostat */
+#define CFG_CMD_SDRAM 0x0000004000000000U /* SDRAM DIMM SPD info printout */
+#define CFG_CMD_DIAG 0x0000008000000000U /* Diagnostics */
+#define CFG_CMD_FPGA 0x0000010000000000U /* FPGA configuration Support */
+#define CFG_CMD_HWFLOW 0x0000020000000000U /* RTS/CTS hw flow control */
+#define CFG_CMD_SAVES 0x0000040000000000U /* save S record dump */
+#define CFG_CMD_SPI 0x0000100000000000U /* SPI utility */
+#define CFG_CMD_FDOS 0x0000200000000000U /* Floppy DOS support */
+#define CFG_CMD_VFD 0x0000400000000000U /* VFD support (TRAB) */
+#define CFG_CMD_NAND 0x0000800000000000U /* NAND support */
+#define CFG_CMD_BMP 0x0001000000000000U /* BMP support */
+#define CFG_CMD_PORTIO 0x0002000000000000U /* Port I/O */
+#define CFG_CMD_PING 0x0004000000000000U /* ping support */
+#define CFG_CMD_MMC 0x0008000000000000U /* MMC support */
+#define CFG_CMD_FAT 0x0010000000000000U /* FAT support */
+
+#define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFU /* ALL commands */
/* Commands that are considered "non-standard" for some reason
* (memory hogs, requires special hardware, not fully tested, etc.)
#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */
#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
# if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port at */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
# else
#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
# endif
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
__u16 lastEUN; /* should be suppressed */
__u16 numfreeEUNs;
__u16 LastFreeEUN; /* To speed up finding a free EUN */
- __u32 long nr_sects;
+ __u32 nr_sects;
int head,sect,cyl;
__u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */
__u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */
{
int fd, fdr, rc, otherdev, len, resid;
erase_info_t erase;
- char *data;
+ char *data = NULL;
if ((fd = open (DEVNAME (curdev), mode)) < 0) {
fprintf (stderr,
projects / u-boot / commitdiff