configs: at91sam9m10g45ek: Update to support DM/DT

Update the configuration files to support the device tree and driver
model. The device clock and pins configuration are handled by the
clock and the pinctrl drivers respectively.

Because the limitation of internal SRAM size, the SPL with driver
model can't be supported, disable the SPL option.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile
index e5448ecc675f5f048e4f3bbcf4833961f7817cf8..55cd9468a43aef9beee1cb7c40e93213a7767d20 100644 (file)
--- a/board/atmel/at91sam9m10g45ek/Makefile
+++ b/board/atmel/at91sam9m10g45ek/Makefile
@@ -10,4 +10,4 @@
 #
 
 obj-y += at91sam9m10g45ek.o
-obj-y += led.o
+obj-(CONFIG_AT91_LED) += led.o

diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig
index 342fc8a46951fcead239b705fe3391ff8b2f8675..b0933406af9ba16e3bf7bb2c014ba084011278c0 100644 (file)
--- a/configs/at91sam9m10g45ek_mmc_defconfig
+++ b/configs/at91sam9m10g45ek_mmc_defconfig
@@ -1,19 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9M10G45EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
@@ -29,7 +23,23 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y

diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig
index 7164d82a4573f8863bd2c96056f0db5d2614c4c4..e8324e71f3fa43c3bc855c2fd47478281669a197 100644 (file)
--- a/configs/at91sam9m10g45ek_nandflash_defconfig
+++ b/configs/at91sam9m10g45ek_nandflash_defconfig
@@ -1,17 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_AT91=y
 CONFIG_TARGET_AT91SAM9M10G45EK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH"
 CONFIG_BOOTDELAY=3
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 # CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot> "
 # CONFIG_CMD_BDI is not set
@@ -27,7 +23,23 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index a62b70b4596259d00deda3e284f279ea1b14c92e..010ebdbd40f01c03c5455d6fb27d26b3cd684b06 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -30,13 +30,6 @@
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_GPIO_PULLUP        1       /* keep pullups on peripheral pins */
-
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
-#define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 /* LCD */
 #define LCD_BPP                                LCD_COLOR8
@@ -49,12 +42,6 @@
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE            0x73E00000
 
-/* LED */
-#define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIN_PD31   /* this is the user1 led */
-#define        CONFIG_GREEN_LED        AT91_PIN_PD0    /* this is the user2 led */
-
-
 /*
  * BOOTP options
  */
@@ -75,7 +62,7 @@
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -92,24 +79,10 @@
 
 #endif
 
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
 /* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY
 
-/* USB */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
-
 #define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
 
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
@@ -118,7 +91,7 @@
 #ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET              0x120000
 #define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                        0x20000