* GPIO's as PERST# signals for its downstream ports - configure the GPIO's
* properly and assert reset for 100ms.
*/
+#define MAX_PCI_DEVS 32
+struct pci_dev {
+ pci_dev_t devfn;
+ unsigned short vendor;
+ unsigned short device;
+ unsigned short class;
+ unsigned short busno; /* subbordinate busno */
+ struct pci_dev *ppar;
+};
+struct pci_dev pci_devs[MAX_PCI_DEVS];
+int pci_devno;
+int pci_bridgeno;
+
void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
unsigned short vendor, unsigned short device,
unsigned short class)
{
+ int i;
u32 dw;
+ struct pci_dev *pdev = &pci_devs[pci_devno++];
debug("%s: %02d:%02d.%02d: %04x:%04x\n", __func__,
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev), vendor, device);
+
+ /* store array of devs for later use in device-tree fixup */
+ pdev->devfn = dev;
+ pdev->vendor = vendor;
+ pdev->device = device;
+ pdev->class = class;
+ pdev->ppar = NULL;
+ if (class == PCI_CLASS_BRIDGE_PCI)
+ pdev->busno = ++pci_bridgeno;
+ else
+ pdev->busno = 0;
+
+ /* fixup RC - it should be 00:00.0 not 00:01.0 */
+ if (PCI_BUS(dev) == 0)
+ pdev->devfn = 0;
+
+ /* find dev's parent */
+ for (i = 0; i < pci_devno; i++) {
+ if (pci_devs[i].busno == PCI_BUS(pdev->devfn)) {
+ pdev->ppar = &pci_devs[i];
+ break;
+ }
+ }
+
+ /* assert downstream PERST# */
if (vendor == PCI_VENDOR_ID_PLX &&
(device & 0xfff0) == 0x8600 &&
PCI_DEV(dev) == 0 && PCI_FUNC(dev) == 0) {
}
}
+#if defined(CONFIG_CMD_PCI)
+#define PCI_ID(x) ( \
+ (PCI_BUS(x->devfn)<<16)| \
+ (PCI_DEV(x->devfn)<<11)| \
+ (PCI_FUNC(x->devfn)<<8) \
+ )
+#define PCIE_PATH "/soc/pcie@0x01000000"
+int fdt_add_pci_node(void *blob, int par, struct pci_dev *dev)
+{
+ uint32_t reg[5];
+ char node[32];
+ int np;
+
+ sprintf(node, "pcie@%d,%d,%d", PCI_BUS(dev->devfn),
+ PCI_DEV(dev->devfn), PCI_FUNC(dev->devfn));
+
+ np = fdt_subnode_offset(blob, par, node);
+ if (np >= 0)
+ return np;
+ np = fdt_add_subnode(blob, par, node);
+ if (np < 0) {
+ printf(" %s failed: no space\n", __func__);
+ return np;
+ }
+
+ memset(reg, 0, sizeof(reg));
+ reg[0] = cpu_to_fdt32(PCI_ID(dev));
+ fdt_setprop(blob, np, "reg", reg, sizeof(reg));
+
+ return np;
+}
+
+/* build a path of nested PCI devs for all bridges passed through */
+int fdt_add_pci_path(void *blob, struct pci_dev *dev)
+{
+ struct pci_dev *bridges[MAX_PCI_DEVS];
+ int k, np;
+
+ /* build list of parents */
+ np = fdt_path_offset(blob, PCIE_PATH);
+ if (np < 0)
+ return np;
+
+ k = 0;
+ while (dev) {
+ bridges[k++] = dev;
+ dev = dev->ppar;
+ };
+
+ /* now add them the to DT in reverse order */
+ while (k--) {
+ np = fdt_add_pci_node(blob, np, bridges[k]);
+ if (np < 0)
+ break;
+ }
+
+ return np;
+}
+
+/*
+ * The GW16082 has a hardware errata errata such that it's
+ * INTA/B/C/D are mis-mapped to its four slots (slot12-15). Because
+ * of this normal PCI interrupt swizzling will not work so we will
+ * provide an irq-map via device-tree.
+ */
+int fdt_fixup_gw16082(void *blob, int np, struct pci_dev *dev)
+{
+ int len;
+ int host;
+ uint32_t imap_new[8*4*4];
+ const uint32_t *imap;
+ uint32_t irq[4];
+ uint32_t reg[4];
+ int i;
+
+ /* build irq-map based on host controllers map */
+ host = fdt_path_offset(blob, PCIE_PATH);
+ if (host < 0) {
+ printf(" %s failed: missing host\n", __func__);
+ return host;
+ }
+
+ /* use interrupt data from root complex's node */
+ imap = fdt_getprop(blob, host, "interrupt-map", &len);
+ if (!imap || len != 128) {
+ printf(" %s failed: invalid interrupt-map\n",
+ __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ /* obtain irq's of host controller in pin order */
+ for (i = 0; i < 4; i++)
+ irq[(fdt32_to_cpu(imap[(i*8)+3])-1)%4] = imap[(i*8)+6];
+
+ /*
+ * determine number of swizzles necessary:
+ * For each bridge we pass through we need to swizzle
+ * the number of the slot we are on.
+ */
+ struct pci_dev *d;
+ int b;
+ b = 0;
+ d = dev->ppar;
+ while(d && d->ppar) {
+ b += PCI_DEV(d->devfn);
+ d = d->ppar;
+ }
+
+ /* create new irq mappings for slots12-15
+ * <skt> <idsel> <slot> <skt-inta> <skt-intb>
+ * J3 AD28 12 INTD INTA
+ * J4 AD29 13 INTC INTD
+ * J5 AD30 14 INTB INTC
+ * J2 AD31 15 INTA INTB
+ */
+ for (i = 0; i < 4; i++) {
+ /* addr matches bus:dev:func */
+ u32 addr = dev->busno << 16 | (12+i) << 11;
+
+ /* default cells from root complex */
+ memcpy(&imap_new[i*32], imap, 128);
+ /* first cell is PCI device address (BDF) */
+ imap_new[(i*32)+(0*8)+0] = cpu_to_fdt32(addr);
+ imap_new[(i*32)+(1*8)+0] = cpu_to_fdt32(addr);
+ imap_new[(i*32)+(2*8)+0] = cpu_to_fdt32(addr);
+ imap_new[(i*32)+(3*8)+0] = cpu_to_fdt32(addr);
+ /* third cell is pin */
+ imap_new[(i*32)+(0*8)+3] = cpu_to_fdt32(1);
+ imap_new[(i*32)+(1*8)+3] = cpu_to_fdt32(2);
+ imap_new[(i*32)+(2*8)+3] = cpu_to_fdt32(3);
+ imap_new[(i*32)+(3*8)+3] = cpu_to_fdt32(4);
+ /* sixth cell is relative interrupt */
+ imap_new[(i*32)+(0*8)+6] = irq[(15-(12+i)+b+0)%4];
+ imap_new[(i*32)+(1*8)+6] = irq[(15-(12+i)+b+1)%4];
+ imap_new[(i*32)+(2*8)+6] = irq[(15-(12+i)+b+2)%4];
+ imap_new[(i*32)+(3*8)+6] = irq[(15-(12+i)+b+3)%4];
+ }
+ fdt_setprop(blob, np, "interrupt-map", imap_new,
+ sizeof(imap_new));
+ reg[0] = cpu_to_fdt32(0xfff00);
+ reg[1] = 0;
+ reg[2] = 0;
+ reg[3] = cpu_to_fdt32(0x7);
+ fdt_setprop(blob, np, "interrupt-map-mask", reg, sizeof(reg));
+ fdt_setprop_cell(blob, np, "#interrupt-cells", 1);
+ fdt_setprop_string(blob, np, "device_type", "pci");
+ fdt_setprop_cell(blob, np, "#address-cells", 3);
+ fdt_setprop_cell(blob, np, "#size-cells", 2);
+ printf(" Added custom interrupt-map for GW16082\n");
+
+ return 0;
+}
+
+/*
+ * PCI DT nodes must be nested therefore if we need to apply a DT fixup
+ * we will walk the PCI bus and add bridge nodes up to the device receiving
+ * the fixup.
+ */
+void ft_board_pci_fixup(void *blob, bd_t *bd)
+{
+ int i, np;
+ struct pci_dev *dev;
+
+ for (i = 0; i < pci_devno; i++) {
+ dev = &pci_devs[i];
+
+ /*
+ * The GW16082 consists of a TI XIO2001 PCIe-to-PCI bridge and
+ * an EEPROM at i2c1-0x50.
+ */
+ if ((dev->vendor == PCI_VENDOR_ID_TI) &&
+ (dev->device == 0x8240) &&
+ (i2c_set_bus_num(1) == 0) &&
+ (i2c_probe(0x50) == 0))
+ {
+ np = fdt_add_pci_path(blob, dev);
+ if (np > 0)
+ fdt_fixup_gw16082(blob, np, dev);
+ }
+ }
+}
+#endif /* if defined(CONFIG_CMD_PCI) */
+
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
"no-1-8-v");
}
+#if defined(CONFIG_CMD_PCI)
+ if (!getenv("nopcifixup"))
+ ft_board_pci_fixup(blob, bd);
+#endif
+
/*
* Peripheral Config:
* remove nodes by alias path if EEPROM config tells us the
projects / u-boot / commitdiff