]> git.sur5r.net Git - u-boot/commitdiff
mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
authorMichael Barkowski <michael.barkowski@freescale.com>
Thu, 27 Mar 2008 18:34:43 +0000 (14:34 -0400)
committerKim Phillips <kim.phillips@freescale.com>
Fri, 28 Mar 2008 21:02:27 +0000 (16:02 -0500)
This patch fixes eeprom page size so that you can now write more than
64 bytes at a time.

It also makes the board take MAC addresses, if found, from EEPROM.

User should place up to 4 addresses at offset 0x7f00, for
eth{,1,2,3}addr.  Any unused addresses should be zero.  This group of
four six-byte values should have it's CRC at the end.  crc32 and
eeprom commands can be used to accomplish this.

If CRC fails, MAC addresses come from the environment.  If CRC
succeeds, the environment is overwritten at startup.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
board/freescale/mpc8323erdb/mpc8323erdb.c
include/configs/MPC8323ERDB.h
lib_ppc/board.c

index 88d5e8fb40efb5430e5971915dfe230fca4e7488..afc0eee3b70783fc0222d4375e006c48c32ca4a3 100644 (file)
@@ -185,3 +185,37 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
+
+#if defined(CFG_I2C_MAC_OFFSET)
+int mac_read_from_eeprom(void)
+{
+       uchar buf[28];
+       char str[18];
+       int i = 0;
+       unsigned int crc = 0;
+       unsigned char enetvar[32];
+
+       /* Read MAC addresses from EEPROM */
+       if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) {
+               printf("\nEEPROM @ 0x%02x read FAILED!!!\n",
+                      CFG_I2C_EEPROM_ADDR);
+       } else {
+               if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) {
+                       printf("Reading MAC from EEPROM\n");
+                       for (i = 0; i < 4; i++) {
+                               if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) {
+                                       sprintf(str,
+                                               "%02X:%02X:%02X:%02X:%02X:%02X",
+                                               buf[i * 6], buf[i * 6 + 1],
+                                               buf[i * 6 + 2], buf[i * 6 + 3],
+                                               buf[i * 6 + 4], buf[i * 6 + 5]);
+                                       sprintf((char *)enetvar,
+                                               i ? "eth%daddr" : "ethaddr", i);
+                                       setenv((char *)enetvar, str);
+                               }
+                       }
+               }
+       }
+       return 0;
+}
+#endif                         /* CONFIG_I2C_MAC_OFFSET */
index 65f829d2a911ae4a59cf52fc9957e6179cf63d32..92d7aa42b40dd8b4070472f943c0581d0f6ef554 100644 (file)
 /*
  * Config on-board EEPROM
  */
-#define CFG_I2C_EEPROM_ADDR     0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR            0x50
+#define CFG_I2C_EEPROM_ADDR_LEN                2
+#define CFG_EEPROM_PAGE_WRITE_BITS     6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
 
 /*
  * General PCI
 #define CONFIG_HAS_ETH1                                /* add support for "eth1addr" */
 #define CONFIG_ETH1ADDR        00:04:9f:ef:03:02
 
+/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */
+#define CFG_I2C_MAC_OFFSET     0x7f00  /* MAC address offset in I2C EEPROM */
+
 #define CONFIG_IPADDR          10.0.0.2
 #define CONFIG_SERVERIP                10.0.0.1
 #define CONFIG_GATEWAYIP       10.0.0.1
index 30383027c78d33d310c9468340ec635d7c4aed4a..50cdf8c8d333e2fd568505fb39f95ab0b02beca9 100644 (file)
@@ -876,7 +876,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
        sc3_read_eeprom();
 #endif
 
-#ifdef CFG_ID_EEPROM
+#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET)
        mac_read_from_eeprom();
 #endif