#define MAX_BANKS 8
#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
-#define FCM_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for FCM */
#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
struct fsl_elbc_mtd *priv = chip->priv;
struct fsl_elbc_ctrl *ctrl = priv->ctrl;
fsl_lbc_t *lbc = ctrl->regs;
- long long end_tick;
+ u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
+ u32 time_start;
u32 ltesr;
/* Setup the FMR[OP] to execute without write protection */
out_be32(&lbc->lsor, priv->bank);
/* wait for FCM complete flag or timeout */
- end_tick = usec2ticks(FCM_TIMEOUT_MSECS * 1000) + get_ticks();
+ time_start = get_timer(0);
ltesr = 0;
- while (end_tick > get_ticks()) {
+ while (get_timer(time_start) < timeo) {
ltesr = in_be32(&lbc->ltesr);
if (ltesr & LTESR_CC)
break;
#define MAX_BANKS CONFIG_SYS_FSL_IFC_BANK_COUNT
#define ERR_BYTE 0xFF /* Value returned for read bytes
when read failed */
-#define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC
- NAND Machine */
struct fsl_ifc_ctrl;
struct fsl_ifc_mtd *priv = chip->priv;
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
struct fsl_ifc *ifc = ctrl->regs;
- long long end_tick;
+ u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
+ u32 time_start;
u32 eccstat[4];
int i;
IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for NAND Machine complete flag or timeout */
- end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
+ time_start = get_timer(0);
- while (end_tick > get_ticks()) {
+ while (get_timer(time_start) < timeo) {
ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
if (ctrl->status & IFC_NAND_EVTER_STAT_OPC)
struct fsl_ifc *ifc = ifc_ctrl->regs;
uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
uint32_t ncfgr = 0;
- long long end_tick;
+ u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
+ u32 time_start;
if (ver > FSL_IFC_V1_1_0) {
ncfgr = ifc_in32(&ifc->ifc_nand.ncfgr);
ifc_out32(&ifc->ifc_nand.ncfgr, ncfgr | IFC_NAND_SRAM_INIT_EN);
/* wait for SRAM_INIT bit to be clear or timeout */
- end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
- while (end_tick > get_ticks()) {
+ time_start = get_timer(0);
+ while (get_timer(time_start) < timeo) {
ifc_ctrl->status =
ifc_in32(&ifc->ifc_nand.nand_evter_stat);
/* start read seq */
ifc_out32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
- /* wait for NAND Machine complete flag or timeout */
- end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
+ time_start = get_timer(0);
- while (end_tick > get_ticks()) {
+ while (get_timer(time_start) < timeo) {
ifc_ctrl->status = ifc_in32(&ifc->ifc_nand.nand_evter_stat);
if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC)