arc: Update data accessors with use of memory barriers

Memory barriers are proven to be a requirement for both compiler and
real hardware to properly serialize access to critical data.

For example if CPU or data bus it uses may do reordering of data
accesses absence of memory barriers might easily lead to very subtle and
hard to debug data corruptions.

This implementation was heavily borrowed from up to date Linux kernel.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index b6f7724931ceab6dd674b56920e9134a4fe62c28..42e7f22b28ddb4ea2db55b6eef8c5558bbb3ecf6 100644 (file)
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -10,6 +10,46 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
+#ifdef CONFIG_ISA_ARCV2
+
+/*
+ * ARCv2 based HS38 cores are in-order issue, but still weakly ordered
+ * due to micro-arch buffering/queuing of load/store, cache hit vs. miss ...
+ *
+ * Explicit barrier provided by DMB instruction
+ *  - Operand supports fine grained load/store/load+store semantics
+ *  - Ensures that selected memory operation issued before it will complete
+ *    before any subsequent memory operation of same type
+ *  - DMB guarantees SMP as well as local barrier semantics
+ *    (asm-generic/barrier.h ensures sane smp_*mb if not defined here, i.e.
+ *    UP: barrier(), SMP: smp_*mb == *mb)
+ *  - DSYNC provides DMB+completion_of_cache_bpu_maintenance_ops hence not needed
+ *    in the general case. Plus it only provides full barrier.
+ */
+
+#define mb()   asm volatile("dmb 3\n" : : : "memory")
+#define rmb()  asm volatile("dmb 1\n" : : : "memory")
+#define wmb()  asm volatile("dmb 2\n" : : : "memory")
+
+#else
+
+/*
+ * ARCompact based cores (ARC700) only have SYNC instruction which is super
+ * heavy weight as it flushes the pipeline as well.
+ * There are no real SMP implementations of such cores.
+ */
+
+#define mb()   asm volatile("sync\n" : : : "memory")
+#endif
+
+#ifdef CONFIG_ISA_ARCV2
+#define __iormb()              rmb()
+#define __iowmb()              wmb()
+#else
+#define __iormb()              do { } while (0)
+#define __iowmb()              do { } while (0)
+#endif
+
 /*
  * Given a physical address and a length, return a virtual address
  * that can be used to access the memory range with the caching
@@ -72,18 +112,6 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
        return w;
 }
 
-#define readb __raw_readb
-
-static inline u16 readw(const volatile void __iomem *addr)
-{
-       return __le16_to_cpu(__raw_readw(addr));
-}
-
-static inline u32 readl(const volatile void __iomem *addr)
-{
-       return __le32_to_cpu(__raw_readl(addr));
-}
-
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
        __asm__ __volatile__("stb%U1    %0, %1\n"
@@ -108,10 +136,6 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
                             : "memory");
 }
 
-#define writeb __raw_writeb
-#define writew(b, addr) __raw_writew(__cpu_to_le16(b), addr)
-#define writel(b, addr) __raw_writel(__cpu_to_le32(b), addr)
-
 static inline int __raw_readsb(unsigned int addr, void *data, int bytelen)
 {
        __asm__ __volatile__ ("1:ld.di  r8, [r0]\n"
@@ -184,6 +208,45 @@ static inline int __raw_writesl(unsigned int addr, void *data, int longlen)
        return longlen;
 }
 
+/*
+ * MMIO can also get buffered/optimized in micro-arch, so barriers needed
+ * Based on ARM model for the typical use case
+ *
+ *     <ST [DMA buffer]>
+ *     <writel MMIO "go" reg>
+ *  or:
+ *     <readl MMIO "status" reg>
+ *     <LD [DMA buffer]>
+ *
+ * http://lkml.kernel.org/r/20150622133656.GG1583@arm.com
+ */
+#define readb(c)               ({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)               ({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)               ({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)            ({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)            ({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)            ({ __iowmb(); writel_relaxed(v,c); })
+
+/*
+ * Relaxed API for drivers which can handle barrier ordering themselves
+ *
+ * Also these are defined to perform little endian accesses.
+ * To provide the typical device register semantics of fixed endian,
+ * swap the byte order for Big Endian
+ *
+ * http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de
+ */
+#define readb_relaxed(c)       __raw_readb(c)
+#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \
+                                       __raw_readw(c)); __r; })
+#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
+                                       __raw_readl(c)); __r; })
+
+#define writeb_relaxed(v,c)    __raw_writeb(v,c)
+#define writew_relaxed(v,c)    __raw_writew((__force u16) cpu_to_le16(v),c)
+#define writel_relaxed(v,c)    __raw_writel((__force u32) cpu_to_le32(v),c)
+
 #define out_arch(type, endian, a, v)   __raw_write##type(cpu_to_##endian(v), a)
 #define in_arch(type, endian, a)       endian##_to_cpu(__raw_read##type(a))