nand: Add SPL_NAND support to mxc_nand_spl

Add support for generic NAND SPL via the SPL framework into the
mxc_nand_spl driver. This is basically just a simple rename and
publication of the already implemented functions. To avoid the
bare-bones functions getting in the way of the NAND_SPL, build
them only if CONFIG_SPL_FRAMEWORK is not defined.

Also make sure the requested payload is aligned to full pages,
otherwise this simple driver fails to load the last page.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Scott Wood <scottwood@freescale.com>

diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c
index 09f23c30c4ef46a4e5158750fba8d8b2125989ba..5608352a451acfbb436dfad827e56213feac6f3a 100644 (file)
--- a/drivers/mtd/nand/mxc_nand_spl.c
+++ b/drivers/mtd/nand/mxc_nand_spl.c
@@ -290,7 +290,7 @@ static int is_badblock(int pagenumber)
        return 0;
 }
 
-static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
+int nand_spl_load_image(uint32_t from, unsigned int size, void *buf)
 {
        int i;
        unsigned int page;
@@ -303,6 +303,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
        page = from / CONFIG_SYS_NAND_PAGE_SIZE;
        i = 0;
 
+       size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE);
        while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) {
                if (nfc_read_page(page, buf) < 0)
                        return -1;
@@ -332,6 +333,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
        return 0;
 }
 
+#ifndef CONFIG_SPL_FRAMEWORK
 /*
  * The main entry for NAND booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
@@ -345,8 +347,9 @@ void nand_boot(void)
         * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must
         * be aligned to full pages
         */
-       if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
-                      (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
+       if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+                       CONFIG_SYS_NAND_U_BOOT_SIZE,
+                       (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) {
                /* Copy from NAND successful, start U-boot */
                uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
                uboot();
@@ -364,3 +367,7 @@ void hang(void)
        /* Loop forever */
        while (1) ;
 }
+#endif
+
+void nand_init(void) {}
+void nand_deselect(void) {}