ppc/86xx: Clean up MPC8610 HPCD PCI setup code

Use new fsl_pci_init_port() that reduces amount of duplicated code in the
board ports, use IO accessors and clean up printing of status info.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index f42c3167224d5f843476b81b00554fc42760538b..2d4b9addb67bbda0581d6ccec96d945455d232ad 100644 (file)
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -224,158 +224,83 @@ static struct pci_controller pcie1_hose;
 static struct pci_controller pcie2_hose;
 #endif
 
-int first_free_busno = 0;
-
 void pci_init_board(void)
 {
        volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
        volatile ccsr_gur_t *gur = &immap->im_gur;
-       uint devdisr = gur->devdisr;
-       uint io_sel = (gur->pordevsr & MPC8610_PORDEVSR_IO_SEL)
-               >> MPC8610_PORDEVSR_IO_SEL_SHIFT;
-       uint host_agent = (gur->porbmsr & MPC8610_PORBMSR_HA)
-               >> MPC8610_PORBMSR_HA_SHIFT;
+       struct fsl_pci_info pci_info[3];
+       u32 devdisr, pordevsr, io_sel;
+       int first_free_busno = 0;
+       int num = 0;
+
+       int pci_agent, pcie_ep, pcie_configured;
+
+       devdisr = in_be32(&gur->devdisr);
+       pordevsr = in_be32(&gur->pordevsr);
+       io_sel = (pordevsr & MPC8610_PORDEVSR_IO_SEL)
+                       >> MPC8610_PORDEVSR_IO_SEL_SHIFT;
 
-       printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
-               devdisr, io_sel, host_agent);
+       debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
 
 #ifdef CONFIG_PCIE1
- {
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
-       struct pci_controller *hose = &pcie1_hose;
-       int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-       int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
-       struct pci_region *r = hose->regions;
-
-       if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
-               printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
-                       pcie_ep ? "End Point" : "Root Complex",
-                       (uint)pci);
-               if (pci->pme_msg_det)
-                       pci->pme_msg_det = 0xffffffff;
-
-               /* outbound memory */
-               pci_set_region(r++,
-                        CONFIG_SYS_PCIE1_MEM_BUS,
-                        CONFIG_SYS_PCIE1_MEM_PHYS,
-                        CONFIG_SYS_PCIE1_MEM_SIZE,
-                        PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                        CONFIG_SYS_PCIE1_IO_BUS,
-                        CONFIG_SYS_PCIE1_IO_PHYS,
-                        CONFIG_SYS_PCIE1_IO_SIZE,
-                        PCI_REGION_IO);
-
-               hose->region_count = r - hose->regions;
-
-               hose->first_busno = first_free_busno;
-
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-               first_free_busno = hose->last_busno + 1;
-               printf(" PCI-Express 1 on bus %02x - %02x\n",
-                       hose->first_busno, hose->last_busno);
-
-       } else
-               puts(" PCI-Express 1: Disabled\n");
- }
-#else
-       puts("PCI-Express 1: Disabled\n");
-#endif /* CONFIG_PCIE1 */
+       pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+       if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
+               SET_STD_PCIE_INFO(pci_info[num], 1);
+               pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+               printf ("    PCIE1 connected to ULI as %s (base addr %lx)\n",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               pci_info[num].regs);
+
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pcie1_hose, first_free_busno);
+       } else {
+               printf ("    PCIE1: disabled\n");
+       }
 
+       puts("\n");
+#else
+       setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE1); /* disable */
+#endif
 
 #ifdef CONFIG_PCIE2
- {
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
-       struct pci_controller *hose = &pcie2_hose;
-       struct pci_region *r = hose->regions;
-
-       int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
-       int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
-
-       if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
-               printf(" PCI-Express 2 connected to slot as %s" \
-                       " (base address %x)\n",
-                       pcie_ep ? "End Point" : "Root Complex",
-                       (uint)pci);
-               if (pci->pme_msg_det)
-                       pci->pme_msg_det = 0xffffffff;
-
-               /* outbound memory */
-               pci_set_region(r++,
-                        CONFIG_SYS_PCIE2_MEM_BUS,
-                        CONFIG_SYS_PCIE2_MEM_PHYS,
-                        CONFIG_SYS_PCIE2_MEM_SIZE,
-                        PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                        CONFIG_SYS_PCIE2_IO_BUS,
-                        CONFIG_SYS_PCIE2_IO_PHYS,
-                        CONFIG_SYS_PCIE2_IO_SIZE,
-                        PCI_REGION_IO);
-
-               hose->region_count = r - hose->regions;
-
-               hose->first_busno = first_free_busno;
-
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-               first_free_busno = hose->last_busno + 1;
-               printf(" PCI-Express 2 on bus %02x - %02x\n",
-                       hose->first_busno, hose->last_busno);
-       } else
-               puts(" PCI-Express 2: Disabled\n");
- }
-#else
-       puts("PCI-Express 2: Disabled\n");
-#endif /* CONFIG_PCIE2 */
+       pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+       if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
+               SET_STD_PCIE_INFO(pci_info[num], 2);
+               pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+               printf ("    PCIE2 connected to Slot as %s (base addr %lx)\n",
+                               pcie_ep ? "End Point" : "Root Complex",
+                               pci_info[num].regs);
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pcie2_hose, first_free_busno);
+       } else {
+               printf ("    PCIE2: disabled\n");
+       }
 
+       puts("\n");
+#else
+       setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE2); /* disable */
+#endif
 
 #ifdef CONFIG_PCI1
- {
-       volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
-       struct pci_controller *hose = &pci1_hose;
-       int pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
-       struct pci_region *r = hose->regions;
-
-       if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
+       if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
+               SET_STD_PCI_INFO(pci_info[num], 1);
+               pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
                printf(" PCI connected to PCI slots as %s" \
-                       " (base address %x)\n",
+                       " (base address %lx)\n",
                        pci_agent ? "Agent" : "Host",
-                       (uint)pci);
-
-               /* outbound memory */
-               pci_set_region(r++,
-                        CONFIG_SYS_PCI1_MEM_BUS,
-                        CONFIG_SYS_PCI1_MEM_PHYS,
-                        CONFIG_SYS_PCI1_MEM_SIZE,
-                        PCI_REGION_MEM);
-
-               /* outbound io */
-               pci_set_region(r++,
-                        CONFIG_SYS_PCI1_IO_BUS,
-                        CONFIG_SYS_PCI1_IO_PHYS,
-                        CONFIG_SYS_PCI1_IO_SIZE,
-                        PCI_REGION_IO);
-
-               hose->region_count = r - hose->regions;
-
-               hose->first_busno = first_free_busno;
-
-               fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
-               first_free_busno = hose->last_busno + 1;
-               printf(" PCI on bus %02x - %02x\n",
-                       hose->first_busno, hose->last_busno);
-
+                       pci_info[num].regs);
+               first_free_busno = fsl_pci_init_port(&pci_info[num++],
+                                       &pci1_hose, first_free_busno);
+       } else {
+               printf ("    PCI: disabled\n");
+       }
 
-       } else
-               puts(" PCI: Disabled\n");
- }
-#endif /* CONFIG_PCI1 */
+       puts("\n");
+#else
+       setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCI1); /* disable */
+#endif
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)