board: ge: bx50v3: detect the monitor type by reading VPD earlier

Move the VPD reading earlier in order to establish the monitor
type as soon as possible.

The configuration of the specific environment variables needs to be
done later after the environment is configured.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index 478699aec90e95910e59527ffc451c8a082634a4..3de958e6283543fcd6672c4aaadee5d14de8199a 100644 (file)
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -33,6 +33,11 @@
 #include "../../../drivers/net/e1000.h"
 DECLARE_GLOBAL_DATA_PTR;
 
+struct vpd_cache;
+
+static int confidx = 3;  /* Default to b850v3. */
+static struct vpd_cache vpd;
+
 #ifndef CONFIG_SYS_I2C_EEPROM_ADDR
 # define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
@@ -619,7 +624,6 @@ static void process_vpd(struct vpd_cache *vpd)
 
 static int read_vpd(uint eeprom_bus)
 {
-       struct vpd_cache vpd;
        int res;
        int size = 1024;
        uint8_t *data;
@@ -639,7 +643,6 @@ static int read_vpd(uint eeprom_bus)
        if (res == 0) {
                memset(&vpd, 0, sizeof(vpd));
                vpd_reader(size, data, &vpd, vpd_callback);
-               process_vpd(&vpd);
        }
 
        free(data);
@@ -689,8 +692,31 @@ int board_early_init_f(void)
        return 0;
 }
 
+static void set_confidx(const struct vpd_cache* vpd)
+{
+       switch (vpd->product_id) {
+       case VPD_PRODUCT_B450:
+               confidx = 1;
+               break;
+       case VPD_PRODUCT_B650:
+               confidx = 2;
+               break;
+       case VPD_PRODUCT_B850:
+               confidx = 3;
+               break;
+       }
+}
+
 int board_init(void)
 {
+       setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+       setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+       setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
+
+       read_vpd(CONFIG_SYS_I2C_EEPROM_BUS);
+
+       set_confidx(&vpd);
+
        gpio_direction_output(SUS_S3_OUT, 1);
        gpio_direction_output(WIFI_EN, 1);
 #if defined(CONFIG_VIDEO_IPUV3)
@@ -705,10 +731,6 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
        setup_spi();
 #endif
-       setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-       setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-       setup_i2c(3, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
-
        return 0;
 }
 
@@ -774,7 +796,7 @@ void pmic_init(void)
 
 int board_late_init(void)
 {
-       read_vpd(CONFIG_SYS_I2C_EEPROM_BUS);
+       process_vpd(&vpd);
 
 #ifdef CONFIG_CMD_BMODE
        add_board_boot_modes(board_boot_modes);