net: emaclite: use __raw_readl/writel instead of weird define

out_be32 and in_be32 are actually #defined to little endian
writel/readl in arch/microblaze.

Just use __raw_writel/readl instead. That is also what is used
in the Linux kernel driver for this IP block

Tested on MIPSfpga. Can tftp a kernel.

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 6df222bf74044c40bd8f319bf9a6111641f9a3ec..d86e7a3954645e59f8563eb999c110b5812c0cd6 100644 (file)
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -155,7 +155,7 @@ static int wait_for_bit(const char *func, u32 *reg, const u32 mask,
        unsigned long start = get_timer(0);
 
        while (1) {
-               val = readl(reg);
+               val = __raw_readl(reg);
 
                if (!set)
                        val = ~val;
@@ -194,16 +194,17 @@ static u32 phyread(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
        if (mdio_wait(regs))
                return 1;
 
-       u32 ctrl_reg = in_be32(&regs->mdioctrl);
-       out_be32(&regs->mdioaddr, XEL_MDIOADDR_OP_MASK |
-                ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
-       out_be32(&regs->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+       u32 ctrl_reg = __raw_readl(&regs->mdioctrl);
+       __raw_writel(XEL_MDIOADDR_OP_MASK
+               | ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
+               | registernum), &regs->mdioaddr);
+       __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, &regs->mdioctrl);
 
        if (mdio_wait(regs))
                return 1;
 
        /* Read data */
-       *data = in_be32(&regs->mdiord);
+       *data = __raw_readl(&regs->mdiord);
        return 0;
 }
 
@@ -221,11 +222,12 @@ static u32 phywrite(struct xemaclite *emaclite, u32 phyaddress, u32 registernum,
         * Data register. Finally, set the Status bit in the MDIO Control
         * register to start a MDIO write transaction.
         */
-       u32 ctrl_reg = in_be32(&regs->mdioctrl);
-       out_be32(&regs->mdioaddr, ~XEL_MDIOADDR_OP_MASK &
-                ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT) | registernum));
-       out_be32(&regs->mdiowr, data);
-       out_be32(&regs->mdioctrl, ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+       u32 ctrl_reg = __raw_readl(&regs->mdioctrl);
+       __raw_writel(~XEL_MDIOADDR_OP_MASK
+               & ((phyaddress << XEL_MDIOADDR_PHYADR_SHIFT)
+               | registernum), &regs->mdioaddr);
+       __raw_writel(data, &regs->mdiowr);
+       __raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK, &regs->mdioctrl);
 
        if (mdio_wait(regs))
                return 1;
@@ -328,27 +330,27 @@ static int emaclite_start(struct udevice *dev)
  * TX - TX_PING & TX_PONG initialization
  */
        /* Restart PING TX */
-       out_be32(&regs->tx_ping_tsr, 0);
+       __raw_writel(0, &regs->tx_ping_tsr);
        /* Copy MAC address */
        xemaclite_alignedwrite(pdata->enetaddr, &regs->tx_ping,
                               ENET_ADDR_LENGTH);
        /* Set the length */
-       out_be32(&regs->tx_ping_tplr, ENET_ADDR_LENGTH);
+       __raw_writel(ENET_ADDR_LENGTH, &regs->tx_ping_tplr);
        /* Update the MAC address in the EMAC Lite */
-       out_be32(&regs->tx_ping_tsr, XEL_TSR_PROG_MAC_ADDR);
+       __raw_writel(XEL_TSR_PROG_MAC_ADDR, &regs->tx_ping_tsr);
        /* Wait for EMAC Lite to finish with the MAC address update */
-       while ((in_be32 (&regs->tx_ping_tsr) &
+       while ((__raw_readl(&regs->tx_ping_tsr) &
                XEL_TSR_PROG_MAC_ADDR) != 0)
                ;
 
        if (emaclite->txpp) {
                /* The same operation with PONG TX */
-               out_be32(&regs->tx_pong_tsr, 0);
+               __raw_writel(0, &regs->tx_pong_tsr);
                xemaclite_alignedwrite(pdata->enetaddr, &regs->tx_pong,
                                       ENET_ADDR_LENGTH);
-               out_be32(&regs->tx_pong_tplr, ENET_ADDR_LENGTH);
-               out_be32(&regs->tx_pong_tsr, XEL_TSR_PROG_MAC_ADDR);
-               while ((in_be32(&regs->tx_pong_tsr) &
+               __raw_writel(ENET_ADDR_LENGTH, &regs->tx_pong_tplr);
+               __raw_writel(XEL_TSR_PROG_MAC_ADDR, &regs->tx_pong_tsr);
+               while ((__raw_readl(&regs->tx_pong_tsr) &
                       XEL_TSR_PROG_MAC_ADDR) != 0)
                        ;
        }
@@ -357,13 +359,13 @@ static int emaclite_start(struct udevice *dev)
  * RX - RX_PING & RX_PONG initialization
  */
        /* Write out the value to flush the RX buffer */
-       out_be32(&regs->rx_ping_rsr, XEL_RSR_RECV_IE_MASK);
+       __raw_writel(XEL_RSR_RECV_IE_MASK, &regs->rx_ping_rsr);
 
        if (emaclite->rxpp)
-               out_be32(&regs->rx_pong_rsr, XEL_RSR_RECV_IE_MASK);
+               __raw_writel(XEL_RSR_RECV_IE_MASK, &regs->rx_pong_rsr);
 
-       out_be32(&regs->mdioctrl, XEL_MDIOCTRL_MDIOEN_MASK);
-       if (in_be32(&regs->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
+       __raw_writel(XEL_MDIOCTRL_MDIOEN_MASK, &regs->mdioctrl);
+       if (__raw_readl(&regs->mdioctrl) & XEL_MDIOCTRL_MDIOEN_MASK)
                if (!setup_phy(dev))
                        return -1;
 
@@ -380,9 +382,9 @@ static int xemaclite_txbufferavailable(struct xemaclite *emaclite)
         * Read the other buffer register
         * and determine if the other buffer is available
         */
-       tmp = ~in_be32(&regs->tx_ping_tsr);
+       tmp = ~__raw_readl(&regs->tx_ping_tsr);
        if (emaclite->txpp)
-               tmp |= ~in_be32(&regs->tx_pong_tsr);
+               tmp |= ~__raw_readl(&regs->tx_pong_tsr);
 
        return !(tmp & XEL_TSR_XMIT_BUSY_MASK);
 }
@@ -406,40 +408,42 @@ static int emaclite_send(struct udevice *dev, void *ptr, int len)
        if (!maxtry) {
                printf("Error: Timeout waiting for ethernet TX buffer\n");
                /* Restart PING TX */
-               out_be32(&regs->tx_ping_tsr, 0);
+               __raw_writel(0, &regs->tx_ping_tsr);
                if (emaclite->txpp) {
-                       out_be32(&regs->tx_pong_tsr, 0);
+                       __raw_writel(0, &regs->tx_pong_tsr);
                }
                return -1;
        }
 
        /* Determine if the expected buffer address is empty */
-       reg = in_be32(&regs->tx_ping_tsr);
+       reg = __raw_readl(&regs->tx_ping_tsr);
        if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
                debug("Send packet from tx_ping buffer\n");
                /* Write the frame to the buffer */
                xemaclite_alignedwrite(ptr, &regs->tx_ping, len);
-               out_be32(&regs->tx_ping_tplr, len &
-                       (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO));
-               reg = in_be32(&regs->tx_ping_tsr);
+               __raw_writel(len
+                       & (XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO),
+                      &regs->tx_ping_tplr);
+               reg = __raw_readl(&regs->tx_ping_tsr);
                reg |= XEL_TSR_XMIT_BUSY_MASK;
-               out_be32(&regs->tx_ping_tsr, reg);
+               __raw_writel(reg, &regs->tx_ping_tsr);
                return 0;
        }
 
        if (emaclite->txpp) {
                /* Determine if the expected buffer address is empty */
-               reg = in_be32(&regs->tx_pong_tsr);
+               reg = __raw_readl(&regs->tx_pong_tsr);
                if ((reg & XEL_TSR_XMIT_BUSY_MASK) == 0) {
                        debug("Send packet from tx_pong buffer\n");
                        /* Write the frame to the buffer */
                        xemaclite_alignedwrite(ptr, &regs->tx_pong, len);
-                       out_be32(&regs->tx_pong_tplr, len &
+                       __raw_writel(len &
                                 (XEL_TPLR_LENGTH_MASK_HI |
-                                 XEL_TPLR_LENGTH_MASK_LO));
-                       reg = in_be32(&regs->tx_pong_tsr);
+                                 XEL_TPLR_LENGTH_MASK_LO),
+                                 &regs->tx_pong_tplr);
+                       reg = __raw_readl(&regs->tx_pong_tsr);
                        reg |= XEL_TSR_XMIT_BUSY_MASK;
-                       out_be32(&regs->tx_pong_tsr, reg);
+                       __raw_writel(reg, &regs->tx_pong_tsr);
                        return 0;
                }
        }
@@ -459,7 +463,7 @@ static int emaclite_recv(struct udevice *dev, int flags, uchar **packetp)
 
 try_again:
        if (!emaclite->use_rx_pong_buffer_next) {
-               reg = in_be32(&regs->rx_ping_rsr);
+               reg = __raw_readl(&regs->rx_ping_rsr);
                debug("Testing data at rx_ping\n");
                if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
                        debug("Data found in rx_ping buffer\n");
@@ -479,7 +483,7 @@ try_again:
                        goto try_again;
                }
        } else {
-               reg = in_be32(&regs->rx_pong_rsr);
+               reg = __raw_readl(&regs->rx_pong_rsr);
                debug("Testing data at rx_pong\n");
                if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
                        debug("Data found in rx_pong buffer\n");
@@ -526,9 +530,9 @@ try_again:
                                      length - first_read);
 
        /* Acknowledge the frame */
-       reg = in_be32(ack);
+       reg = __raw_readl(ack);
        reg &= ~XEL_RSR_RECV_DONE_MASK;
-       out_be32(ack, reg);
+       __raw_writel(reg, ack);
 
        debug("Packet receive from 0x%p, length %dB\n", addr, length);
        *packetp = etherrxbuff;