board: ti: am43xx: add AM437x SK PHY Address

pass correct PHY Address when running on SK
so that we have working ethernet with this board
too.

Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c
index 6379cef89f08959bb2ffc38c451ef698d8aa958c..054a452eac353e79f11a40fa686bf30a20fa1b60 100644 (file)
--- a/board/ti/am43xx/board.c
+++ b/board/ti/am43xx/board.c
@@ -594,6 +594,11 @@ int board_eth_init(bd_t *bis)
                writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
                cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
                cpsw_slaves[0].phy_addr = 16;
+       } else if (board_is_sk()) {
+               writel(RGMII_MODE_ENABLE, &cdev->miisel);
+               cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
+               cpsw_slaves[0].phy_addr = 4;
+               cpsw_slaves[1].phy_addr = 5;
        } else {
                writel(RGMII_MODE_ENABLE, &cdev->miisel);
                cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;