]> git.sur5r.net Git - u-boot/commitdiff
USB OHCI support for at91sam9g45 SoC
authorSergey Matyukevich <geomatsi@gmail.com>
Wed, 9 Jun 2010 19:09:06 +0000 (23:09 +0400)
committerRemy Bohmer <linux@bohmer.net>
Wed, 30 Jun 2010 19:37:36 +0000 (21:37 +0200)
Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards.

Note that according to errata from Atmel, OHCI is not operational
on the first revision of at91sam9g45 chip. So this patch enables
OHCI support for later revisions.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
arch/arm/include/asm/arch-at91/at91_pmc.h
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
drivers/usb/host/ohci-at91.c

index 5b1a85d051479416f8400ac96193ace31635b902..2f9ad96003c0ff1e473f98fbfa12eab5cf88e7bd 100644 (file)
@@ -35,13 +35,15 @@ typedef struct at91_pmc {
        u32     pcer;           /* 0x10 Peripheral Clock Enable Register */
        u32     pcdr;           /* 0x14 Peripheral Clock Disable Register */
        u32     pcsr;           /* 0x18 Peripheral Clock Status Register */
-       u32     reserved1;
+       u32     uckr;           /* 0x1C UTMI Clock Register */
        u32     mor;            /* 0x20 Main Oscilator Register */
        u32     mcfr;           /* 0x24 Main Clock Frequency Register */
        u32     pllar;          /* 0x28 PLL A Register */
        u32     pllbr;          /* 0x2C PLL B Register */
        u32     mckr;           /* 0x30 Master Clock Register */
-       u32     reserved2[3];
+       u32     reserved1;
+       u32     usb;            /* 0x38 USB Clock Register */
+       u32     reserved2;
        u32     pck[4];         /* 0x40 Programmable Clock Register 0 - 3 */
        u32     reserved3[4];
        u32     ier;            /* 0x60 Interrupt Enable Register */
@@ -198,6 +200,14 @@ typedef struct at91_pmc {
 #define                        AT91_PMC_PDIV_1                 (0 << 12)
 #define                        AT91_PMC_PDIV_2                 (1 << 12)
 
+#ifdef CONFIG_AT91_LEGACY
+#define                AT91_PMC_USB                    (AT91_PMC + 0x38)       /* USB Clock Register */
+#endif
+#define                AT91_PMC_USBS_USB_PLLA          (0x0)           /* USB Clock Input is PLLA */
+#define                AT91_PMC_USBS_USB_UPLL          (0x1)           /* USB Clock Input is UPLL */
+#define                AT91_PMC_USBDIV_8               (0x7 <<  8)     /* USB Clock divided by 8 */
+#define                AT91_PMC_USBDIV_10              (0x9 <<  8)     /* USB Clock divided by 10 */
+
 #ifdef CONFIG_AT91_LEGACY
 #define        AT91_PMC_PCKR(n)        (AT91_PMC + 0x40 + ((n) * 4))   /* Programmable Clock 0-3 Registers */
 
index edfb627bbcd745bfa531a838b7c135532f1c99c5..8fa044907024d8a719493696898094e7f2607eed 100644 (file)
@@ -87,6 +87,16 @@ static void at91sam9m10g45ek_nand_hw_init(void)
 }
 #endif
 
+#ifdef CONFIG_CMD_USB
+static void at91sam9m10g45ek_usb_hw_init(void)
+{
+       at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+
+       at91_set_gpio_output(AT91_PIN_PD1, 0);
+       at91_set_gpio_output(AT91_PIN_PD3, 0);
+}
+#endif
+
 #ifdef CONFIG_MACB
 static void at91sam9m10g45ek_macb_hw_init(void)
 {
@@ -251,6 +261,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_NAND
        at91sam9m10g45ek_nand_hw_init();
 #endif
+#ifdef CONFIG_CMD_USB
+       at91sam9m10g45ek_usb_hw_init();
+#endif
 #ifdef CONFIG_HAS_DATAFLASH
        at91_spi0_hw_init(1 << 0);
 #endif
index b2e03bc58bcf87892198213637c579aa49e2056c..64fde68ff59c077749084914a959d6000bfee723 100644 (file)
@@ -41,6 +41,15 @@ int usb_cpu_init(void)
        writel(get_pllb_init(), &pmc->pllbr);
        while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
                ;
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+       /* Enable UPLL */
+       writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
+               &pmc->uckr);
+       while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU)
+               ;
+
+       /* Select PLLA as input clock of OHCI */
+       writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb);
 #endif
 
        /* Enable USB host clock. */
@@ -72,6 +81,11 @@ int usb_cpu_stop(void)
        writel(0, &pmc->pllbr);
        while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
                ;
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+       /* Disable UPLL */
+       writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
+       while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
+               ;
 #endif
 
        return 0;