sunxi: Add defconfig and dts file for the Orange Pi Lite SBC

The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM,
micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector,
sdio attached rtl8189ftv wifi and an ir receiver.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ef573ec68515c42214b72a79ee919958c6f08c5d..acecb7c3594ea6febf96ec6770d37fd8fbabfe3a 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -242,6 +242,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
        sun8i-a83t-sinovoip-bpi-m3.dtb
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
        sun8i-h3-orangepi-2.dtb \
+       sun8i-h3-orangepi-lite.dtb \
        sun8i-h3-orangepi-one.dtb \
        sun8i-h3-orangepi-pc.dtb \
        sun8i-h3-orangepi-plus.dtb

diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts
new file mode 100644 (file)
index 0000000..ac71749
--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       model = "Xunlong Orange Pi Lite";
+       compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3";
+
+       aliases {
+               /* The H3 emac is not used so the wifi is ethernet0 */
+               ethernet1 = &rtl8189ftv;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+               pwr_led {
+                       label = "orangepi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               status_led {
+                       label = "orangepi:red:status";
+                       gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       r_gpio_keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&sw_r_opc>;
+
+               sw4 {
+                       label = "sw4";
+                       linux,code = <BTN_0>;
+                       gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ehci2 {
+       status = "okay";
+};
+
+&ir {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ir_pins_a>;
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_a>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+
+       /*
+        * Explicitly define the sdio device, so that we can add an ethernet
+        * alias for it (which e.g. makes u-boot set a mac-address).
+        */
+       rtl8189ftv: sdio_wifi@1 {
+               reg = <1>;
+       };
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&ohci2 {
+       status = "okay";
+};
+
+&pio {
+       leds_opc: led_pins@0 {
+               allwinner,pins = "PA15";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&r_pio {
+       leds_r_opc: led_pins@0 {
+               allwinner,pins = "PL10";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       sw_r_opc: key_pins@0 {
+               allwinner,pins = "PL3";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       /* USB VBUS is always on */
+       status = "okay";
+};

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index d2dfebef46bd8f4cfef96dd907c627aa6c10115f..0dc84f6aabdf79c9f052137519bebbf3c4e81dab 100644 (file)
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -56,6 +56,7 @@ F:    configs/ga10h_v1_1_defconfig
 F:     configs/gt90h_v4_defconfig
 F:     configs/inet86dz_defconfig
 F:     configs/orangepi_2_defconfig
+F:     configs/orangepi_lite_defconfig
 F:     configs/orangepi_one_defconfig
 F:     configs/orangepi_pc_defconfig
 F:     configs/orangepi_plus_defconfig

diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig
new file mode 100644 (file)
index 0000000..417e4f6
--- /dev/null
+++ b/configs/orangepi_lite_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PF6"
+# CONFIG_VIDEO is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_USB_EHCI_HCD=y