volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ uint io_sel = (gur->pordevsr & MPC8610_PORDEVSR_IO_SEL)
+ >> MPC8610_PORDEVSR_IO_SEL_SHIFT;
+ uint host_agent = (gur->porbmsr & MPC8610_PORBMSR_HA)
+ >> MPC8610_PORBMSR_HA_SHIFT;
printf( " pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
devdisr, io_sel, host_agent);
-
#ifdef CONFIG_PCIE1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
+ uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
+ >> MPC8641_PORDEVSR_IO_SEL_SHIFT;
#ifdef CONFIG_PCI1
{
extern void fsl_pci_init(struct pci_controller *hose);
struct pci_controller *hose = &pci1_hose;
#ifdef DEBUG
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+ uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
+ >> MPC8641_PORBMSR_HA_SHIFT;
uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
#endif
if ((io_sel == 2 || io_sel == 3 || io_sel == 5
}
+
#if defined(CONFIG_OF_BOARD_SETUP)
+
void
ft_board_setup(void *blob, bd_t *bd)
{
int node, tmp[2];
const char *path;
- fdt_fixup_ethernet(blob, bd);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
-
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
-
- fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
+ ft_cpu_setup(blob, bd);
node = fdt_path_offset(blob, "/aliases");
tmp[0] = 0;
#include <asm/immap_86xx.h>
#include <asm/immap_fsl_pci.h>
#include <spd.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup (void *blob, bd_t * bd);
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
extern void ddr_enable_ecc (unsigned int dram_size);
}
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t * bd)
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+void
+ft_board_setup (void *blob, bd_t *bd)
{
- u32 *p;
- int len;
+ int node, tmp[2];
+ const char *path;
- ft_cpu_setup (blob, bd);
+ ft_cpu_setup(blob, bd);
- p = ft_get_prop (blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32 (bd->bi_memstart);
- *p = cpu_to_be32 (bd->bi_memsize);
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCI2
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
}
}
#endif
LIB = $(obj)lib$(CPU).a
-START = start.o #resetvec.o
+START = start.o
SOBJS = cache.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- spd_sdram.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+COBJS-y += traps.o
+COBJS-y += cpu.o
+COBJS-y += cpu_init.o
+COBJS-y += speed.o
+COBJS-y += interrupts.o
+COBJS-y += spd_sdram.o
+
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
#include <mpc86xx.h>
#include <asm/fsl_law.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
int
checkcpu(void)
#endif /* CONFIG_DDR_ECC */
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- ulong clock;
- int len;
-
- clock = bd->bi_busfreq;
- p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
-#if defined(CONFIG_TSEC1)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
- if (p)
- memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#if defined(CONFIG_TSEC2)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#if defined(CONFIG_TSEC3)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet2addr, 6);
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet2addr, 6);
-#endif
-
-#if defined(CONFIG_TSEC4)
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet3addr, 6);
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet3addr, 6);
-#endif
-#endif /* CONFIG_OF_FLAT_TREE */
-
/*
* Print out the state of various machine registers.
* Currently prints out LAWs and BR0/OR0
#include <common.h>
#include <mpc86xx.h>
+#include <asm/fsl_law.h>
DECLARE_GLOBAL_DATA_PTR;
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", bd->bi_busfreq / 4, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", bd->bi_intfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
+ || defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob, bd);
+#endif
+
+#ifdef CFG_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", bd->bi_busfreq, 1);
+#endif
+}
spd_eeprom_t spd1,spd2;
volatile ccsr_ddr_t *ddr;
unsigned sdram_cfg_1;
- unsigned char sdram_type, mem_type, config, mod_attr;
+ unsigned char sdram_type, mem_type, mod_attr;
unsigned char d_init;
unsigned int no_dimm1=0, no_dimm2=0;
printf("No memory modules found for DDR controller %d!!\n", ddr_num);
return 0;
} else {
+
+#if defined(CONFIG_DDR_ECC)
+ unsigned char config;
+#endif
mem_type = no_dimm2 ? spd1.mem_type : spd2.mem_type;
/*
int memsize_ddr1_dimm2 = 0;
int memsize_ddr1 = 0;
unsigned int law_size_ddr1;
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
#ifdef CONFIG_DDR_INTERLEAVE
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1;
#endif
#endif
debug("Interleaved memory size is 0x%08lx\n", memsize_total);
-#ifdef CONFIG_DDR_INTERLEAVE
#if (CFG_PAGE_INTERLEAVING == 1)
printf("Page ");
#elif (CFG_BANK_INTERLEAVING == 1)
printf("Super-bank ");
#else
printf("Cache-line ");
-#endif
#endif
printf("Interleaved");
return memsize_total * 1024 * 1024;
* 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
*/
pixis-reset altbank cf 40 2.5 10
+
+
+DIP Switch Settings
+-------------------
+To manually switch the flash banks using the DIP switch
+settings, toggle both SW6:1 and SW6:2.
typedef struct ccsr_gur {
uint porpllsr; /* 0xe0000 - POR PLL ratio status register */
uint porbmsr; /* 0xe0004 - POR boot mode status register */
-#define MPC86xx_PORBMSR_HA 0x00060000
-#define MPC85xx_PORBMSR_HA 0x00070000
+#define MPC8610_PORBMSR_HA 0x00070000
+#define MPC8610_PORBMSR_HA_SHIFT 16
+#define MPC8641_PORBMSR_HA 0x00060000
+#define MPC8641_PORBMSR_HA_SHIFT 17
uint porimpscr; /* 0xe0008 - POR I/O impedance status and control register */
uint pordevsr; /* 0xe000c - POR I/O device status regsiter */
-#define MPC86xx_PORDEVSR_IO_SEL 0x000F0000
-#define MPC85xx_PORDEVSR_IO_SEL 0x00380000 /* 85xx platform type */
+#define MPC8610_PORDEVSR_IO_SEL 0x00380000
+#define MPC8610_PORDEVSR_IO_SEL_SHIFT 19
+#define MPC8641_PORDEVSR_IO_SEL 0x000F0000
+#define MPC8641_PORDEVSR_IO_SEL_SHIFT 16
#define MPC86xx_PORDEVSR_CORE1TE 0x00000080 /* ASMP (Core1 addr trans) */
uint pordbgmsr; /* 0xe0010 - POR debug mode status register */
char res1[12];
#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */
/* video */
-#define CONFIG_VIDEO
+#undef CONFIG_VIDEO
#if defined(CONFIG_VIDEO)
#define CONFIG_CFB_CONSOLE
/*
* Pass open firmware flat tree to kernel
*/
-#define CONFIG_OF_FLAT_TREE 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8641@0"
-#define OF_SOC "soc@f8000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc@f8000000/serial@4500"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
#define CFG_64BIT_VSPRINTF 1
#define CFG_64BIT_STRTOUL 1
projects / u-boot / commitdiff