Support ZynqMP zc1751 with DC cards.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
dtb-$(CONFIG_ARCH_ZYNQMP) += \
zynqmp-ep108.dtb \
zynqmp-zcu102.dtb \
- zynqmp-zcu102-revB.dtb
+ zynqmp-zcu102-revB.dtb \
+ zynqmp-zc1751-xm015-dc1.dtb \
+ zynqmp-zc1751-xm016-dc2.dtb \
+ zynqmp-zc1751-xm019-dc5.dtb
dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb
dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm015-dc1 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem3;
+ gpio0 = &gpio;
+ i2c0 = &i2c1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ spi0 = &qspi;
+ usb0 = &usb0;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem3 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+ eeprom@55 {
+ compatible = "at,24c64"; /* 24AA64 */
+ reg = <0x55>;
+ };
+};
+
+&qspi {
+ status = "okay";
+ flash@0 {
+ compatible = "m25p80"; /* Micron MT25QU512ABB8ESF */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <108000000>; /* Based on DC1 spec */
+ partition@qspi-fsbl-uboot { /* for testing purpose */
+ label = "qspi-fsbl-uboot";
+ reg = <0x0 0x100000>;
+ };
+ partition@qspi-linux { /* for testing purpose */
+ label = "qspi-linux";
+ reg = <0x100000 0x500000>;
+ };
+ partition@qspi-device-tree { /* for testing purpose */
+ label = "qspi-device-tree";
+ reg = <0x600000 0x20000>;
+ };
+ partition@qspi-rootfs { /* for testing purpose */
+ label = "qspi-rootfs";
+ reg = <0x620000 0x5E0000>;
+ };
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ /* SATA phy OOB timing settings */
+ ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+ ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+ ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+/* eMMC */
+&sdhci0 {
+ status = "okay";
+ bus-width = <8>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+ status = "okay";
+ no-1-8-v; /* for 1.0 silicon */
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&xilinx_drm {
+ status = "okay";
+};
+
+&xlnx_dp {
+ status = "okay";
+};
+
+&xlnx_dp_sub {
+ status = "okay";
+ xlnx,vid-clk-pl;
+};
+
+&xlnx_dp_snd_pcm0 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_pcm1 {
+ status = "okay";
+};
+
+&xlnx_dp_snd_card {
+ status = "okay";
+};
+
+&xlnx_dp_snd_codec0 {
+ status = "okay";
+};
+
+&xlnx_dpdma {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+
+/ {
+ model = "ZynqMP zc1751-xm016-dc2 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ ethernet0 = &gem2;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ rtc0 = &rtc;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ usb0 = &usb1;
+ };
+
+ chosen {
+ bootargs = "earlycon";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem2 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@5 {
+ reg = <5>;
+ ti,rx-internal-delay = <0x8>;
+ ti,tx-internal-delay = <0xa>;
+ ti,fifo-depth = <0x1>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tca6416_u26: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ /* IRQ not connected */
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&nand0 {
+ status = "okay";
+ arasan,has-mdma;
+ num-cs = <2>;
+
+ partition@0 { /* for testing purpose */
+ label = "nand-fsbl-uboot";
+ reg = <0x0 0x0 0x400000>;
+ };
+ partition@1 { /* for testing purpose */
+ label = "nand-linux";
+ reg = <0x0 0x400000 0x1400000>;
+ };
+ partition@2 { /* for testing purpose */
+ label = "nand-device-tree";
+ reg = <0x0 0x1800000 0x400000>;
+ };
+ partition@3 { /* for testing purpose */
+ label = "nand-rootfs";
+ reg = <0x0 0x1C00000 0x1400000>;
+ };
+ partition@4 { /* for testing purpose */
+ label = "nand-bitstream";
+ reg = <0x0 0x3000000 0x400000>;
+ };
+ partition@5 { /* for testing purpose */
+ label = "nand-misc";
+ reg = <0x0 0x3400000 0xFCC00000>;
+ };
+
+ partition@6 { /* for testing purpose */
+ label = "nand1-fsbl-uboot";
+ reg = <0x1 0x0 0x400000>;
+ };
+ partition@7 { /* for testing purpose */
+ label = "nand1-linux";
+ reg = <0x1 0x400000 0x1400000>;
+ };
+ partition@8 { /* for testing purpose */
+ label = "nand1-device-tree";
+ reg = <0x1 0x1800000 0x400000>;
+ };
+ partition@9 { /* for testing purpose */
+ label = "nand1-rootfs";
+ reg = <0x1 0x1C00000 0x1400000>;
+ };
+ partition@10 { /* for testing purpose */
+ label = "nand1-bitstream";
+ reg = <0x1 0x3000000 0x400000>;
+ };
+ partition@11 { /* for testing purpose */
+ label = "nand1-misc";
+ reg = <0x1 0x3400000 0xFCC00000>;
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ num-cs = <1>;
+ spi0_flash0: spi0_flash0@0 {
+ compatible = "m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ spi0_flash0@00000000 {
+ label = "spi0_flash0";
+ reg = <0x0 0x100000>;
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ num-cs = <1>;
+ spi1_flash0: spi1_flash0@0 {
+ compatible = "mtd_dataflash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+
+ spi1_flash0@00000000 {
+ label = "spi1_flash0";
+ reg = <0x0 0x84000>;
+ };
+ };
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk.dtsi"
+/ {
+ model = "ZynqMP zc1751-xm019-dc5 RevA";
+ compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+ aliases {
+ ethernet0 = &gem1;
+ gpio0 = &gpio;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci0;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ bootargs = "earlycon=cdns,mmio,0xff000000,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+ };
+};
+
+/* fpd_dma clk 667MHz, lpd_dma 500MHz */
+&fpd_dma_chan1 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+ xlnx,overfetch; /* for testing purpose */
+ xlnx,ratectrl = <0>; /* for testing purpose */
+ xlnx,src-issue = <31>;
+};
+
+&fpd_dma_chan2 {
+ status = "okay";
+ xlnx,ratectrl = <100>; /* for testing purpose */
+ xlnx,src-issue = <4>; /* for testing purpose */
+};
+
+&fpd_dma_chan3 {
+ status = "okay";
+};
+
+&fpd_dma_chan4 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan5 {
+ status = "okay";
+};
+
+&fpd_dma_chan6 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&fpd_dma_chan7 {
+ status = "okay";
+};
+
+&fpd_dma_chan8 {
+ status = "okay";
+ xlnx,include-sg; /* for testing purpose */
+};
+
+&gem1 {
+ status = "okay";
+ local-mac-address = [00 0a 35 00 02 90];
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0 {
+ reg = <0>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c0 {
+ status = "okay";
+};
+
+/* FIXME: Add device */
+&i2c1 {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&watchdog0 {
+ status = "okay";
+};
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm015_dc1"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_GPIO=y
+CONFIG_ZYNQMP_USB=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm015-dc1"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm016_dc2"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_GPIO=y
+CONFIG_ZYNQMP_USB=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm016-dc2"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_MMC=y
+CONFIG_NAND_ARASAN=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_DM_ETH=y
+CONFIG_ZYNQ_GEM=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
--- /dev/null
+CONFIG_ARM=y
+CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zc1751_xm019_dc5"
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_DM_GPIO=y
+CONFIG_SYS_TEXT_BASE=0x8000000
+CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zc1751-xm019-dc5"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_PROMPT="ZynqMP> "
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_OF_EMBED=y
+CONFIG_DM_MMC=y
+CONFIG_ZYNQ_SDHCI=y
+CONFIG_DM_ETH=y
--- /dev/null
+/*
+ * Configuration for Xilinx ZynqMP zc1751 XM015 DC1
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H
+#define __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_SDHCI1
+#define CONFIG_ZYNQ_I2C1
+#define CONFIG_SYS_I2C_ZYNQ
+#define CONFIG_AHCI
+#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm015 dc1"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zc1751-dc1\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZC1751_XM015_DC1_H */
--- /dev/null
+/*
+ * Configuration for Xilinx ZynqMP zc1751 XM016 DC2
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H
+#define __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H
+
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_SYS_I2C_ZYNQ
+#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB1_XHCI_BASEADDR}
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm016 dc2"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zc1751-dc2\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZC1751_XM016_DC2_H */
--- /dev/null
+/*
+ * Configuration for Xilinx ZynqMP zc1751 XM019 DC5
+ *
+ * (C) Copyright 2015 Xilinx, Inc.
+ * Siva Durga Prasad <siva.durga.paladugu@xilinx.com>
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H
+#define __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H
+
+#define CONFIG_ZYNQ_SDHCI0
+#define CONFIG_ZYNQ_I2C0
+#define CONFIG_ZYNQ_I2C1
+#define CONFIG_SYS_I2C_ZYNQ
+
+#define CONFIG_IDENT_STRING " Xilinx ZynqMP ZC1751 xm019 dc5"
+
+#define CONFIG_KERNEL_FDT_OFST_SIZE \
+ "kernel_offset=0x400000\0" \
+ "fdt_offset=0x2400000\0" \
+ "kernel_size=0x2000000\0" \
+ "fdt_size=0x80000\0" \
+ "board=zc1751-dc5\0"
+
+#include <configs/xilinx_zynqmp.h>
+
+#endif /* __CONFIG_ZYNQMP_ZC1751_XM019_DC5_H */
projects / u-boot / commitdiff