]> git.sur5r.net Git - u-boot/commitdiff
stm32f7: sdram: use sdram device tree node to configure sdram controller
authorVikas Manocha <vikas.manocha@st.com>
Mon, 10 Apr 2017 22:02:56 +0000 (15:02 -0700)
committerTom Rini <trini@konsulko.com>
Mon, 8 May 2017 15:39:05 +0000 (11:39 -0400)
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
cc: Christophe KERELLO <christophe.kerello@st.com>

arch/arm/dts/stm32f746-disco.dts
drivers/ram/stm32_sdram.c
include/dt-bindings/memory/stm32-sdram.h [new file with mode: 0644]

index 5846b0d7e74a12b0fba9a13b86073bdea6568dde..f098d2eba316c62aa12090d4f3abf6b259812575 100644 (file)
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f746.dtsi"
+#include <dt-bindings/memory/stm32-sdram.h>
 
 / {
        model = "STMicroelectronics STM32F746-DISCO board";
        pinctrl-0 = <&fmc_pins>;
        pinctrl-names = "default";
        status = "okay";
+
+       mr-nbanks = <1>;
+       /* sdram memory configuration from sdram datasheet IS42S16400J */
+       bank1: bank@0 {
+              st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_2
+                                           CAS_3 RD_BURST_EN RD_PIPE_DL_0>;
+              st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_60 TRAS_42 TRC_60 TRP_18
+                                          TRCD_18>;
+       };
 };
 
 &mac {
index 67d885572d64ed1f352207f62b3c290f78d9bc6c..eb1ab945b509cbcf9f0e6bfc897b9cdc62fadfbb 100644 (file)
 #include <asm/arch/fmc.h>
 #include <asm/arch/stm32.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
+struct stm32_sdram_control {
+       u8 no_columns;
+       u8 no_rows;
+       u8 memory_width;
+       u8 no_banks;
+       u8 cas_latency;
+       u8 rd_burst;
+       u8 rd_pipe_delay;
+};
+
+struct stm32_sdram_timing {
+       u8 tmrd;
+       u8 txsr;
+       u8 tras;
+       u8 trc;
+       u8 trp;
+       u8 trcd;
+};
+struct stm32_sdram_params {
+       u8 no_sdram_banks;
+       struct stm32_sdram_control sdram_control;
+       struct stm32_sdram_timing sdram_timing;
+};
 static inline u32 _ns2clk(u32 ns, u32 freq)
 {
        u32 tmp = freq/1000000;
@@ -21,73 +46,53 @@ static inline u32 _ns2clk(u32 ns, u32 freq)
 
 #define NS2CLK(ns) (_ns2clk(ns, freq))
 
-/*
- * Following are timings for IS42S16400J, from corresponding datasheet
- */
-#define SDRAM_CAS      3       /* 3 cycles */
-#define SDRAM_NB       1       /* Number of banks */
-#define SDRAM_MWID     1       /* 16 bit memory */
-
-#define SDRAM_NR       0x1     /* 12-bit row */
-#define SDRAM_NC       0x0     /* 8-bit col */
-#define SDRAM_RBURST   0x1     /* Single read requests always as bursts */
-#define SDRAM_RPIPE    0x0     /* No HCLK clock cycle delay */
-
-#define SDRAM_TRRD     NS2CLK(12)
-#define SDRAM_TRCD     NS2CLK(18)
-#define SDRAM_TRP      NS2CLK(18)
-#define SDRAM_TRAS     NS2CLK(42)
-#define SDRAM_TRC      NS2CLK(60)
-#define SDRAM_TRFC     NS2CLK(60)
-#define SDRAM_TCDL     (1 - 1)
-#define SDRAM_TRDL     NS2CLK(12)
-#define SDRAM_TBDL     (1 - 1)
 #define SDRAM_TREF     (NS2CLK(64000000 / 8192) - 20)
-#define SDRAM_TCCD     (1 - 1)
-
-#define SDRAM_TXSR     SDRAM_TRFC      /* Row cycle time after precharge */
-#define SDRAM_TMRD     1               /* Page 10, Mode Register Set */
-
-
-/* Last data in to row precharge, need also comply ineq on page 1648 */
-#define SDRAM_TWR      max(\
-               (int)max((int)SDRAM_TRDL, (int)(SDRAM_TRAS - SDRAM_TRCD)), \
-               (int)(SDRAM_TRC - SDRAM_TRCD - SDRAM_TRP)\
-               )
-
 
 #define SDRAM_MODE_BL_SHIFT    0
 #define SDRAM_MODE_CAS_SHIFT   4
 #define SDRAM_MODE_BL          0
-#define SDRAM_MODE_CAS         SDRAM_CAS
+#define SDRAM_MODE_CAS         3
+
+#define SDRAM_TRDL     12
 
-int stm32_sdram_init(void)
+int stm32_sdram_init(struct udevice *dev)
 {
        u32 freq;
+       u32 sdram_twr;
+       struct stm32_sdram_params *params = dev_get_platdata(dev);
 
        /*
         * Get frequency for NS2CLK calculation.
         */
        freq = clock_get(CLOCK_AHB) / CONFIG_SYS_RAM_FREQ_DIV;
+       debug("%s, sdram freq = %d\n", __func__, freq);
+
+       /* Last data in to row precharge, need also comply ineq on page 1648 */
+       sdram_twr = max(
+                       max(SDRAM_TRDL, params->sdram_timing.tras
+                           - params->sdram_timing.trcd),
+                       params->sdram_timing.trc - params->sdram_timing.trcd
+                       - params->sdram_timing.trp
+                      );
 
        writel(CONFIG_SYS_RAM_FREQ_DIV << FMC_SDCR_SDCLK_SHIFT
-                       | SDRAM_CAS << FMC_SDCR_CAS_SHIFT
-                       | SDRAM_NB << FMC_SDCR_NB_SHIFT
-                       | SDRAM_MWID << FMC_SDCR_MWID_SHIFT
-                       | SDRAM_NR << FMC_SDCR_NR_SHIFT
-                       | SDRAM_NC << FMC_SDCR_NC_SHIFT
-                       | SDRAM_RPIPE << FMC_SDCR_RPIPE_SHIFT
-                       | SDRAM_RBURST << FMC_SDCR_RBURST_SHIFT,
-                       &STM32_SDRAM_FMC->sdcr1);
-
-       writel(SDRAM_TRCD << FMC_SDTR_TRCD_SHIFT
-                       | SDRAM_TRP << FMC_SDTR_TRP_SHIFT
-                       | SDRAM_TWR << FMC_SDTR_TWR_SHIFT
-                       | SDRAM_TRC << FMC_SDTR_TRC_SHIFT
-                       | SDRAM_TRAS << FMC_SDTR_TRAS_SHIFT
-                       | SDRAM_TXSR << FMC_SDTR_TXSR_SHIFT
-                       | SDRAM_TMRD << FMC_SDTR_TMRD_SHIFT,
-                       &STM32_SDRAM_FMC->sdtr1);
+               | params->sdram_control.cas_latency << FMC_SDCR_CAS_SHIFT
+               | params->sdram_control.no_banks << FMC_SDCR_NB_SHIFT
+               | params->sdram_control.memory_width << FMC_SDCR_MWID_SHIFT
+               | params->sdram_control.no_rows << FMC_SDCR_NR_SHIFT
+               | params->sdram_control.no_columns << FMC_SDCR_NC_SHIFT
+               | params->sdram_control.rd_pipe_delay << FMC_SDCR_RPIPE_SHIFT
+               | params->sdram_control.rd_burst << FMC_SDCR_RBURST_SHIFT,
+               &STM32_SDRAM_FMC->sdcr1);
+
+       writel(NS2CLK(params->sdram_timing.trcd) << FMC_SDTR_TRCD_SHIFT
+               | NS2CLK(params->sdram_timing.trp) << FMC_SDTR_TRP_SHIFT
+               | NS2CLK(sdram_twr) << FMC_SDTR_TWR_SHIFT
+               | NS2CLK(params->sdram_timing.trc) << FMC_SDTR_TRC_SHIFT
+               | NS2CLK(params->sdram_timing.tras) << FMC_SDTR_TRAS_SHIFT
+               | NS2CLK(params->sdram_timing.txsr) << FMC_SDTR_TXSR_SHIFT
+               | NS2CLK(params->sdram_timing.tmrd) << FMC_SDTR_TMRD_SHIFT,
+               &STM32_SDRAM_FMC->sdtr1);
 
        writel(FMC_SDCMR_BANK_1 | FMC_SDCMR_MODE_START_CLOCK,
               &STM32_SDRAM_FMC->sdcmr);
@@ -121,11 +126,39 @@ int stm32_sdram_init(void)
        return 0;
 }
 
+static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)
+{
+       int ret;
+       int node = dev->of_offset;
+       const void *blob = gd->fdt_blob;
+       struct stm32_sdram_params *params = dev_get_platdata(dev);
+
+       params->no_sdram_banks = fdtdec_get_uint(blob, node, "mr-nbanks", 1);
+       debug("%s, no of banks = %d\n", __func__, params->no_sdram_banks);
+
+       fdt_for_each_subnode(node, blob, node) {
+               ret = fdtdec_get_byte_array(blob, node, "st,sdram-control",
+                                           (u8 *)&params->sdram_control,
+                                           sizeof(params->sdram_control));
+               if (ret)
+                       return ret;
+
+               ret = fdtdec_get_byte_array(blob, node, "st,sdram-timing",
+                                           (u8 *)&params->sdram_timing,
+                                           sizeof(params->sdram_timing));
+               if (ret)
+                       return ret;
+       }
+
+       return 0;
+}
+
 static int stm32_fmc_probe(struct udevice *dev)
 {
 #ifdef CONFIG_CLK
        int ret;
        struct clk clk;
+
        ret = clk_get_by_index(dev, 0, &clk);
        if (ret < 0)
                return ret;
@@ -137,7 +170,10 @@ static int stm32_fmc_probe(struct udevice *dev)
                return ret;
        }
 #endif
-       stm32_sdram_init();
+       ret = stm32_sdram_init(dev);
+       if (ret)
+               return ret;
+
        return 0;
 }
 
@@ -161,5 +197,7 @@ U_BOOT_DRIVER(stm32_fmc) = {
        .id = UCLASS_RAM,
        .of_match = stm32_fmc_ids,
        .ops = &stm32_fmc_ops,
+       .ofdata_to_platdata = stm32_fmc_ofdata_to_platdata,
        .probe = stm32_fmc_probe,
+       .platdata_auto_alloc_size = sizeof(struct stm32_sdram_params),
 };
diff --git a/include/dt-bindings/memory/stm32-sdram.h b/include/dt-bindings/memory/stm32-sdram.h
new file mode 100644 (file)
index 0000000..4cd6c2b
--- /dev/null
@@ -0,0 +1,34 @@
+#ifndef DT_BINDINGS_STM32_SDRAM_H
+#define DT_BINDINGS_STM32_SDRAM_H
+
+#define NO_COL_8       0x0
+#define NO_COL_9       0x1
+#define NO_COL_10      0x2
+#define NO_COL_11      0x3
+
+#define NO_ROW_11      0x0
+#define NO_ROW_12      0x1
+#define NO_ROW_13      0x2
+
+#define MWIDTH_8       0x0
+#define MWIDTH_16      0x1
+#define MWIDTH_32      0x2
+#define BANKS_2                0x0
+#define BANKS_4                0x1
+#define CAS_1          0x1
+#define CAS_2          0x2
+#define CAS_3          0x3
+#define RD_BURST_EN    0x1
+#define RD_BURST_DIS   0x0
+#define RD_PIPE_DL_0   0x0
+#define RD_PIPE_DL_1   0x1
+#define RD_PIPE_DL_2   0x2
+
+#define TMRD_1         0x1
+#define TXSR_60                60
+#define TRAS_42                42
+#define TRC_60         60
+#define TRP_18         18
+#define TRCD_18                18
+
+#endif