Add support for WTK FO300 board (TQM5200 based).

diff --git a/CHANGELOG b/CHANGELOG
index e40de367466f5616b16b13e29f5249cca7bd8c6a..82be4e3d7791430575d6f89799fcbccb9ce962f7 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add support for WTK FO300 board (TQM5200 based).
+
 * Fix TQM834x hang.
 
 * Update for SC520 board.

diff --git a/MAKEALL b/MAKEALL
index 467a9bee0a7a893fb7de1891d0a28c43a92eb320..48eeaaacf66891cea62b74114e3ee020f67d5841 100755 (executable)
--- a/MAKEALL
+++ b/MAKEALL
@@ -29,7 +29,7 @@ LIST_5xxx="   \
        icecube_5200    lite5200b       mcc200          o2dnt           \
        pf5200          PM520           TB5200          Total5100       \
        Total5200       Total5200_Rev2  TQM5200         TQM5200_B       \
-       TQM5200S                                                        \
+       TQM5200S        fo300                                           \
 "
 
 #########################################################################

diff --git a/Makefile b/Makefile
index 4d579d9bd350dbcd1c5b41f0287381a6928335cf..4cc7a48ba3218596c73dad4d419cbde8fa4ec590 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -424,8 +424,13 @@ TQM5200S_config \
 TQM5200S_HIGHBOOT_config \
 TQM5200_STK100_config \
 cam5200_config \
-MiniFAP_config:        unconfig
+MiniFAP_config \
+fo300_config:  unconfig
        @ >include/config.h
+       @[ -z "$(findstring fo300,$@)" ] || \
+               { echo "#define CONFIG_FO300"   >>include/config.h ; \
+                 echo "... TQM5200 on FO300" ; \
+               }
        @[ -z "$(findstring MiniFAP,$@)" ] || \
                { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
                  echo "... TQM5200_AC on MiniFAP" ; \

diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index c37d4c662ef36ff9cf56f73029c1c1dcc842e0a6..7af69f21a2355faf1a85ca5a0bc30a40e7e9c131 100755 (executable)
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -30,8 +30,8 @@
 #include <command.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#if defined (CONFIG_STK52XX)
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define DEFAULT_VOL    45
 #define DEFAULT_FREQ   500
 #define DEFAULT_DURATION       200
@@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
        return rcode;
 }
+#endif
 
+#if defined(CONFIG_STK52XX)
 void led_init(void)
 {
        struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
@@ -736,7 +738,9 @@ int do_led(char *argv[])
 
        return 0;
 }
+#endif
 
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 /*
  * return 1 on CAN initialization failure
  * return 0 if no failure
@@ -1106,6 +1110,7 @@ int do_rs232(char *argv[])
        return error_status;
 }
 
+#ifndef CONFIG_FO300
 static void sm501_backlight (unsigned int state)
 {
        if (state == BL_ON) {
@@ -1115,6 +1120,7 @@ static void sm501_backlight (unsigned int state)
                *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
                        ~((1 << 26) | (1 << 27));
 }
+#endif
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1124,7 +1130,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
        printf ("Revision 100 of STK52XX not supported!\n");
        return 1;
 #endif
+#if defined(CONFIG_STK52XX)
        led_init();
+#endif
        can_init();
 
        switch (argc) {
@@ -1152,6 +1160,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                        else
                                printf ("Error\n");
                        return rcode;
+#ifndef CONFIG_FO300
                } else if (strncmp (argv[1], "backlight", 4) == 0) {
                        if (strncmp (argv[2], "on", 2) == 0) {
                                sm501_backlight (BL_ON);
@@ -1161,14 +1170,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
                                sm501_backlight (BL_OFF);
                                return 0;
                        }
+#endif
                }
                break;
 
+#if defined(CONFIG_STK52XX)
        case 4:
                if (strcmp (argv[1], "led") == 0) {
                        return (do_led (argv));
                }
                break;
+#endif
 
        default:
                break;
@@ -1204,7 +1216,9 @@ U_BOOT_CMD(
        "[channel]\n"
        "    - play short beep on \"l\"eft or \"r\"ight channel\n"
 );
+#endif /* CONFIG_STK52XX  || CONFIG_FO300 */
 
+#if defined(CONFIG_STK52XX)
 U_BOOT_CMD(
        fkt ,   4,      1,      cmd_fkt,
        "fkt     - Function test routines\n",
@@ -1217,5 +1231,14 @@ U_BOOT_CMD(
        "fkt backlight on/off\n"
        "     - switch backlight on or off\n"
 );
-#endif /* CONFIG_STK52XX */
+#elif defined(CONFIG_FO300)
+U_BOOT_CMD(
+       fkt ,   3,      1,      cmd_fkt,
+       "fkt     - Function test routines\n",
+       "fkt can\n"
+       "     - loopback plug for X16/X29 required\n"
+       "fkt rs232 number\n"
+       "     - loopback plug(s) for X21/X22 required\n"
+);
+#endif
 #endif /* CFG_CMD_BSP */

diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index d6f7737d5bd90cc41f18c21ef9a941060feadcdf..0026e086cbbf293b039640fe45b8c0a821395b4c 100644 (file)
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -290,6 +290,8 @@ int checkboard (void)
 # define CARRIER_NAME  "TB5200"
 #elif defined(CONFIG_CAM5200)
 # define CARRIER_NAME  "Cam5200"
+#elif defined(CONFIG_FO300)
+# define CARRIER_NAME  "FO300"
 #else
 # error "Unknown carrier board"
 #endif
@@ -541,7 +543,11 @@ int last_stage_init (void)
 
 #ifdef CONFIG_VIDEO_SM501
 
+#ifdef CONFIG_FO300
+#define DISPLAY_WIDTH   800
+#else
 #define DISPLAY_WIDTH   640
+#endif
 #define DISPLAY_HEIGHT  480
 
 #ifdef CONFIG_VIDEO_SM501_8BPP
@@ -571,6 +577,28 @@ static const SMI_REGS init_regs [] =
        {0x80218, 0x000201e9},
        {0x80200, 0x00013306},
 #else  /* panel + CRT */
+#ifdef CONFIG_FO300
+       {0x00004, 0x0},
+       {0x00048, 0x00021807},
+       {0x0004C, 0x301a0a01},
+       {0x00054, 0x1},
+       {0x00040, 0x00021807},
+       {0x00044, 0x091a0a01},
+       {0x00054, 0x0},
+       {0x80000, 0x0f013106},
+       {0x80004, 0xc428bb17},
+       {0x8000C, 0x00000000},
+       {0x80010, 0x0C800C80},
+       {0x80014, 0x03200000},
+       {0x80018, 0x01e00000},
+       {0x8001C, 0x00000000},
+       {0x80020, 0x01e00320},
+       {0x80024, 0x042a031f},
+       {0x80028, 0x0086034a},
+       {0x8002C, 0x020c01df},
+       {0x80030, 0x000201ea},
+       {0x80200, 0x00010000},
+#else
        {0x00004, 0x0},
        {0x00048, 0x00021807},
        {0x0004C, 0x091a0a01},
@@ -591,6 +619,7 @@ static const SMI_REGS init_regs [] =
        {0x8002C, 0x020c01df},
        {0x80030, 0x000201e9},
        {0x80200, 0x00010000},
+#endif /* #ifdef CONFIG_FO300 */
 #endif
        {0, 0}
 };
@@ -604,7 +633,7 @@ void video_get_info_str (int line_number, char *info)
 {
        if (line_number == 1) {
        strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200)
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300)
        } else if (line_number == 2) {
 #if defined (CONFIG_STK52XX)
                strcpy (info, "        on a STK52xx carrier board");
@@ -612,6 +641,9 @@ void video_get_info_str (int line_number, char *info)
 #if defined (CONFIG_TB5200)
                strcpy (info, "        on a TB5200 carrier board");
 #endif
+#if defined (CONFIG_FO300)
+               strcpy (info, "        on a FO300 carrier board");
+#endif
 #endif
        }
        else {
@@ -697,3 +729,33 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+#ifdef CONFIG_FO300
+int board_early_init_f (void)
+{
+       vu_long timer3_status;
+       DECLARE_GLOBAL_DATA_PTR;
+
+       /* Configure GPT3 as GPIO input */
+       *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+       /* Read in TIMER_3 pin status */
+       timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+       
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+       /* Force silent console mode if S1 switch
+        * is in closed position (TIMER_3 pin status is LOW). */
+       if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+#else
+       /* Force silent console mode if S1 switch
+        * is in open position (TIMER_3 pin status is HIGH). */
+       if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+#endif
+               gd->flags |= GD_FLG_SILENT;
+
+       return 0;
+}
+#endif
+#endif

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index be83b676720dec596861db004e4b7039a42cf790..f157d42fce385d718e367b5b74a60e6f852d866c 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,8 @@
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module                */
 #undef CONFIG_TQM5200_REV100           /*  define for revision 100 modules     */
 
-#ifndef CONFIG_CAM5200                 /* On a Cameron board or ...            */
+/* On a Cameron board or on a FO300 board or ...                               */
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
 #define CONFIG_STK52XX         1       /* ... on a STK52XX board               */
 #endif
 
@@ -58,6 +59,20 @@
 #define CONFIG_BAUDRATE                115200  /* ... at 115200 bps                    */
 #define CFG_BAUDRATE_TABLE     { 9600, 19200, 38400, 57600, 115200, 230400 }
 
+#ifdef CONFIG_FO300
+#define CFG_DEVICE_NULLDEV             1       /* enable null device */
+#define CONFIG_SILENT_CONSOLE          1       /* enable silent startup */
+#define CONFIG_BOARD_EARLY_INIT_F      1       /* used to detect S1 switch position */
+
+#if 0
+#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED    1       /* silent console on PSC1 when S1 */
+                                                       /* switch is closed */
+#endif
+
+#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED             /* silent console on PSC1 when S1 */
+                                                       /* switch is open */
+#endif
+
 #ifdef CONFIG_STK52XX
 #define CONFIG_PS2KBD                  /* AT-PS/2 Keyboard             */
 #define CONFIG_PS2MULT                 /* .. on PS/2 Multiplexer       */
@@ -105,12 +120,18 @@
 #define CONFIG_VIDEO_SM501_32BPP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#ifndef CONFIG_FO300
 #define CONFIG_CONSOLE_EXTRA_INFO
+#else
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 #define CFG_CONSOLE_IS_IN_ENV
-#endif
+#endif /* #ifndef CONFIG_TQM5200S */
 
 #ifdef CONFIG_VIDEO
 #define ADD_BMP_CMD            CFG_CMD_BMP
@@ -124,7 +145,7 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI
 #define ADD_USB_CMD            CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
@@ -148,7 +169,7 @@
 #endif
 
 /* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
+#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define ADD_IDE_CMD            (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
 #else
 #define ADD_IDE_CMD            0
@@ -224,6 +245,12 @@
                "erase FC000000 FC03FFFF;"                              \
                "cp.b 200000 FC000000 ${filesize};"                     \
                "protect on FC000000 FC03FFFF\0"
+#elif defined (CONFIG_FO300)
+#   define ENV_UPDT                                                    \
+       "update=protect off FC000000 FC05FFFF;"                         \
+               "erase FC000000 FC05FFFF;"                              \
+               "cp.b 200000 FC000000 ${filesize};"                     \
+               "protect on FC000000 FC05FFFF\0"
 #else
 # error "Unknown Carrier Board"
 #endif /* CONFIG_STK52XX */
@@ -378,6 +405,13 @@
                                                "2m(initrd),"           \
                                                "8m(misc),"             \
                                                "16m(big-fs)"
+#elif defined (CONFIG_FO300)
+#   define MTDPARTS_DEFAULT    "mtdparts=TQM5200-0:640k(firmware),"    \
+                                               "1408k(kernel),"        \
+                                               "2m(initrd),"           \
+                                               "4m(small-fs),"         \
+                                               "8m(misc),"             \
+                                               "16m(big-fs)"
 #else
 # error "Unknown Carrier Board"
 #endif /* CONFIG_STK52XX */
@@ -450,15 +484,18 @@
  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
  *     00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
  *     01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- *           Use for REV200 STK52XX boards. Do not use with REV100 modules
- *           (because, there I2C1 is used as I2C bus)
+ *           Use for REV200 STK52XX boards and FO300 boards. Do not use
+ *           with REV100 modules (because, there I2C1 is used as I2C bus)
  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
  * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
  *     000 -> All PSC2 pins are GIOPs
  *     001 -> CAN1/2 on PSC2 pins
  *            Use for REV100 STK52xx boards
+ *     01x -> Use AC97
+ * use PSC3: Bits 20-23 (mask: 0x00000f00)
+ *     1100 -> UART/SPI (on FO300 board)
  * use PSC6:
- *   on STK52xx:
+ *   on STK52xx and FO300:
  *     use as UART. Pins PSC6_0 to PSC6_3 are used.
  *     Bits 9:11 (mask: 0x00700000):
  *        101 -> PSC6 : Extended POST test is not available
@@ -480,6 +517,8 @@
 #   define CFG_GPS_PORT_CONFIG 0x91500004
 #  endif
 # endif
+#elif defined (CONFIG_FO300)
+# define CFG_GPS_PORT_CONFIG   0x91502c24
 #else  /* TMQ5200 Inbetriebnahme-Board */
 # define CFG_GPS_PORT_CONFIG   0x81000004
 #endif

diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 50a6ac1e98d5f1aabdb97bc0c31d0f50bebf33b1..daa4d5f6d4cbc5312cd37530f48f9fd8998520ce 100644 (file)
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -235,20 +235,30 @@
 /* General Purpose Timers registers */
 #define MPC5XXX_GPT0_ENABLE            (MPC5XXX_GPT + 0x0)
 #define MPC5XXX_GPT0_COUNTER           (MPC5XXX_GPT + 0x4)
+#define MPC5XXX_GPT0_STATUS            (MPC5XXX_GPT + 0x0C)
 #define MPC5XXX_GPT1_ENABLE            (MPC5XXX_GPT + 0x10)
 #define MPC5XXX_GPT1_COUNTER           (MPC5XXX_GPT + 0x14)
+#define MPC5XXX_GPT1_STATUS            (MPC5XXX_GPT + 0x1C)
 #define MPC5XXX_GPT2_ENABLE            (MPC5XXX_GPT + 0x20)
 #define MPC5XXX_GPT2_COUNTER           (MPC5XXX_GPT + 0x24)
+#define MPC5XXX_GPT2_STATUS            (MPC5XXX_GPT + 0x2C)
 #define MPC5XXX_GPT3_ENABLE            (MPC5XXX_GPT + 0x30)
 #define MPC5XXX_GPT3_COUNTER           (MPC5XXX_GPT + 0x34)
+#define MPC5XXX_GPT3_STATUS            (MPC5XXX_GPT + 0x3C)
 #define MPC5XXX_GPT4_ENABLE            (MPC5XXX_GPT + 0x40)
 #define MPC5XXX_GPT4_COUNTER           (MPC5XXX_GPT + 0x44)
+#define MPC5XXX_GPT4_STATUS            (MPC5XXX_GPT + 0x4C)
 #define MPC5XXX_GPT5_ENABLE            (MPC5XXX_GPT + 0x50)
+#define MPC5XXX_GPT5_STATUS            (MPC5XXX_GPT + 0x5C)
 #define MPC5XXX_GPT5_COUNTER           (MPC5XXX_GPT + 0x54)
 #define MPC5XXX_GPT6_ENABLE            (MPC5XXX_GPT + 0x60)
 #define MPC5XXX_GPT6_COUNTER           (MPC5XXX_GPT + 0x64)
+#define MPC5XXX_GPT6_STATUS            (MPC5XXX_GPT + 0x6C)
 #define MPC5XXX_GPT7_ENABLE            (MPC5XXX_GPT + 0x70)
 #define MPC5XXX_GPT7_COUNTER           (MPC5XXX_GPT + 0x74)
+#define MPC5XXX_GPT7_STATUS            (MPC5XXX_GPT + 0x7C)
+
+#define MPC5XXX_GPT_GPIO_PIN(status)   ((0x00000100 & (status)) >> 8)
 
 #define MPC5XXX_GPT7_PWMCFG            (MPC5XXX_GPT + 0x78)