mx6: Enable L2 cache support

Add L2 cache support and enable it by default.

Configure the L2 cache in the same way as done by FSL kernel:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/mach-mx6/mm.c?h=imx_3.0.35_4.1.0

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 4c5c3672212a8e2d58c1ddddf98e0a7345765a0a..172527987d573137cc1d0fde06557606669beca6 100644 (file)
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -8,6 +8,8 @@
  */
 
 #include <common.h>
+#include <asm/armv7.h>
+#include <asm/pl310.h>
 #include <asm/errno.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
@@ -375,3 +377,59 @@ void imx_setup_hdmi(void)
        writel(reg, &mxc_ccm->chsccdr);
 }
 #endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define IOMUXC_GPR11_L2CACHE_AS_OCRAM 0x00000002
+void v7_outer_cache_enable(void)
+{
+       struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+       unsigned int val;
+
+#if defined CONFIG_MX6SL
+       struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+       val = readl(&iomux->gpr[11]);
+       if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
+               /* L2 cache configured as OCRAM, reset it */
+               val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
+               writel(val, &iomux->gpr[11]);
+       }
+#endif
+
+       writel(0x132, &pl310->pl310_tag_latency_ctrl);
+       writel(0x132, &pl310->pl310_data_latency_ctrl);
+
+       val = readl(&pl310->pl310_prefetch_ctrl);
+
+       /* Turn on the L2 I/D prefetch */
+       val |= 0x30000000;
+
+       /*
+        * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+        * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
+        * But according to ARM PL310 errata: 752271
+        * ID: 752271: Double linefill feature can cause data corruption
+        * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+        * Workaround: The only workaround to this erratum is to disable the
+        * double linefill feature. This is the default behavior.
+        */
+
+#ifndef CONFIG_MX6Q
+       val |= 0x40800000;
+#endif
+       writel(val, &pl310->pl310_prefetch_ctrl);
+
+       val = readl(&pl310->pl310_power_ctrl);
+       val |= L2X0_DYNAMIC_CLK_GATING_EN;
+       val |= L2X0_STNDBY_MODE_EN;
+       writel(val, &pl310->pl310_power_ctrl);
+
+       setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+
+void v7_outer_cache_disable(void)
+{
+       struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+
+       clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
+}
+#endif /* !CONFIG_SYS_L2CACHE_OFF */

diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index f2ad6e9ad32fffda215e8beb8901d8ecff69a727..c2d210a0f325b1abb1af7aba643e5554295b21d6 100644 (file)
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -53,6 +53,7 @@
 #define GLOBAL_TIMER_BASE_ADDR          0x00A00200
 #define PRIVATE_TIMERS_WD_BASE_ADDR     0x00A00600
 #define IC_DISTRIBUTOR_BASE_ADDR        0x00A01000
+#define L2_PL310_BASE                  0x00A02000
 #define GPV0_BASE_ADDR                  0x00B00000
 #define GPV1_BASE_ADDR                  0x00C00000
 #define PCIE_ARB_BASE_ADDR              0x01000000

diff --git a/arch/arm/include/asm/pl310.h b/arch/arm/include/asm/pl310.h
index f41ad8c5597db1e5e19cb889a77befb970991d7f..ddc245bfd559dd6511d06786494b7b304e6341ef 100644 (file)
--- a/arch/arm/include/asm/pl310.h
+++ b/arch/arm/include/asm/pl310.h
@@ -12,6 +12,9 @@
 
 /* Register bit fields */
 #define PL310_AUX_CTRL_ASSOCIATIVITY_MASK      (1 << 16)
+#define L2X0_DYNAMIC_CLK_GATING_EN             (1 << 1)
+#define L2X0_STNDBY_MODE_EN                    (1 << 0)
+#define L2X0_CTRL_EN                           1
 
 struct pl310_regs {
        u32 pl310_cache_id;
@@ -47,6 +50,24 @@ struct pl310_regs {
        u32 pad9[1];
        u32 pl310_clean_inv_line_idx;
        u32 pl310_clean_inv_way;
+       u32 pad10[64];
+       u32 pl310_lockdown_dbase;
+       u32 pl310_lockdown_ibase;
+       u32 pad11[190];
+       u32 pl310_addr_filter_start;
+       u32 pl310_addr_filter_end;
+       u32 pad12[190];
+       u32 pl310_test_operation;
+       u32 pad13[3];
+       u32 pl310_line_data;
+       u32 pad14[7];
+       u32 pl310_line_tag;
+       u32 pad15[3];
+       u32 pl310_debug_ctrl;
+       u32 pad16[7];
+       u32 pl310_prefetch_ctrl;
+       u32 pad17[7];
+       u32 pl310_power_ctrl;
 };
 
 void pl310_inval_all(void);

diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 514d634c0ce34e49e3916d4fee7266fdc2384af8..eb107d312a632c3af73270818727e3d0214ff473 100644 (file)
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -22,4 +22,9 @@
 #define CONFIG_ARM_ERRATA_751472
 #define CONFIG_BOARD_POSTCLK_INIT
 
+#ifndef CONFIG_SYS_L2CACHE_OFF
+#define CONFIG_SYS_L2_PL310
+#define CONFIG_SYS_PL310_BASE  L2_PL310_BASE
+#endif
+
 #endif