Blackfin: add port muxing for BF51x SPI

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
index 99caa96c416e72d70f6b423e844389194aff9aab..b147ce77efd8a3eb075a951f24c12e95a118456b 100644 (file)
--- a/board/bf537-stamp/spi_flash.c
+++ b/board/bf537-stamp/spi_flash.c
@@ -3,7 +3,7 @@
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -163,7 +163,9 @@ static struct manufacturer_info flash_manufacturers[] = {
 
 #define        TIMEOUT 5000    /* timeout of 5 seconds */
 
-/* BF54x support */
+/* If part has multiple SPI flashes, assume SPI0 as that is
+ * the one we can boot off of ...
+ */
 #ifndef pSPI_CTL
 # define pSPI_CTL  pSPI0_CTL
 # define pSPI_BAUD pSPI0_BAUD
@@ -171,19 +173,16 @@ static struct manufacturer_info flash_manufacturers[] = {
 # define pSPI_RDBR pSPI0_RDBR
 # define pSPI_STAT pSPI0_STAT
 # define pSPI_TDBR pSPI0_TDBR
-# define SPI0_SCK      0x0001
-# define SPI0_MOSI     0x0004
-# define SPI0_MISO     0x0002
-# define SPI0_SEL1     0x0010
 #endif
 
 /* Default to the SPI SSEL that we boot off of:
  *     BF54x, BF537, (everything new?): SSEL1
- *     BF533, BF561: SSEL2
+ *     BF51x, BF533, BF561: SSEL2
  */
 #ifndef CONFIG_SPI_FLASH_SSEL
 # if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
-     defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__)
+     defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
+     defined(__ADSPBF51x__)
 #  define CONFIG_SPI_FLASH_SSEL 2
 # else
 #  define CONFIG_SPI_FLASH_SSEL 1
@@ -200,12 +199,15 @@ static void SPI_INIT(void)
 
        /* enable SPI pins: SSEL, MOSI, MISO, SCK */
 #ifdef __ADSPBF54x__
-       *pPORTE_FER |= (SPI0_SCK | SPI0_MOSI | SPI0_MISO | SPI0_SEL1);
+       *pPORTE_FER |= (PE0 | PE1 | PE2 | PE4);
 #elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
        *pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
 #elif defined(__ADSPBF52x__)
        bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3);
        bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4);
+#elif defined(__ADSPBF51x__)
+       bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_7_MASK) | PORT_x_MUX_7_FUNC_1);
+       bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG12 | PG13 | PG14 | PG15);
 #endif
 
        /* initate communication upon write of TDBR */