CONFIG_DEFAULT_DEVICE_TREE="k2g-evm"
CONFIG_SPL=y
CONFIG_OF_BOARD_SETUP=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_REMOTEPROC_TI_POWER=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
/* U-Boot general configuration */
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_MMC_TI_ARGS \
+ DEFAULT_PMMC_BOOT_ENV \
"console=ttyS0,115200n8\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"name_ubi=k2g-evm-ubifs.ubi\0" \
"name_uboot=u-boot-spi-k2g-evm.gph\0" \
"init_mmc=run args_all args_mmc\0" \
+ "soc_variant=k2g\0" \
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0"\
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
"${bootdir}/${name_kern}\0" \
"get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\
+#define CONFIG_BOOTCOMMAND \
+ "run set_name_pmmc init_${boot} get_pmmc_${boot} run_pmmc " \
+ "get_fdt_${boot} get_mon_${boot} get_kern_${boot} " \
+ "run_mon run_kern"
+
#include <configs/ti_armv7_keystone2.h>
/* SPL SPI Loader Configuration */
/* EDMA3 */
#define CONFIG_TI_EDMA3
+#define DEFAULT_PMMC_BOOT_ENV \
+ "set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
+ "dev_pmmc=0\0" \
+ "get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0" \
+ "get_pmmc_ramfs=run get_pmmc_net\0" \
+ "get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} " \
+ "${bootdir}/${name_pmmc}\0" \
+ "get_pmmc_ubi=ubifsload ${loadaddr} ${bootdir}/${name_pmmc}\0" \
+ "run_pmmc=rproc init; rproc list; " \
+ "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; " \
+ "rproc start ${dev_pmmc}\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
"mtdparts=mtdparts=davinci_nand.0:" \
"1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
+#ifndef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND \
"run init_${boot} get_fdt_${boot} get_mon_${boot} " \
"get_kern_${boot} run_mon run_kern"
+#endif
#define CONFIG_BOOTARGS \