]> git.sur5r.net Git - u-boot/commitdiff
arm: at91: dts: Bring in device tree file for AT91SAM9G45
authorSimon Glass <sjg@chromium.org>
Thu, 5 May 2016 13:28:12 +0000 (07:28 -0600)
committerAndreas Bießmann <andreas@biessmann.org>
Sun, 12 Jun 2016 21:49:38 +0000 (23:49 +0200)
Add this file from Linux v4.5.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-on: smartweb, corvus, taurus, axm
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
arch/arm/dts/Makefile
arch/arm/dts/at91sam9g45.dtsi [new file with mode: 0644]
include/dt-bindings/clock/at91.h [new file with mode: 0644]
include/dt-bindings/dma/at91.h [new file with mode: 0644]
include/dt-bindings/pinctrl/at91.h [new file with mode: 0644]

index a8276138ab1849481e34098d06202418231e9849..602fab1a162218a07bdbb5289b5266720e63e480 100644 (file)
@@ -2,6 +2,7 @@
 # SPDX-License-Identifier:     GPL-2.0+
 #
 
+dtb-$(CONFIG_AT91FAMILY) += at91sam9g45-gurnard.dtb
 dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb
 dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb
 dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \
diff --git a/arch/arm/dts/at91sam9g45.dtsi b/arch/arm/dts/at91sam9g45.dtsi
new file mode 100644 (file)
index 0000000..af8b708
--- /dev/null
@@ -0,0 +1,1335 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+       model = "Atmel AT91SAM9G45 family SoC";
+       compatible = "atmel,at91sam9g45";
+       interrupt-parent = <&aic>;
+
+       aliases {
+               serial0 = &dbgu;
+               serial1 = &usart0;
+               serial2 = &usart1;
+               serial3 = &usart2;
+               serial4 = &usart3;
+               gpio0 = &pioA;
+               gpio1 = &pioB;
+               gpio2 = &pioC;
+               gpio3 = &pioD;
+               gpio4 = &pioE;
+               tcb0 = &tcb0;
+               tcb1 = &tcb1;
+               i2c0 = &i2c0;
+               i2c1 = &i2c1;
+               ssc0 = &ssc0;
+               ssc1 = &ssc1;
+               pwm0 = &pwm0;
+       };
+       cpus {
+               #address-cells = <0>;
+               #size-cells = <0>;
+
+               cpu {
+                       compatible = "arm,arm926ej-s";
+                       device_type = "cpu";
+               };
+       };
+
+       memory {
+               reg = <0x70000000 0x10000000>;
+       };
+
+       clocks {
+               slow_xtal: slow_xtal {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+
+               main_xtal: main_xtal {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+
+               adc_op_clk: adc_op_clk{
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <300000>;
+               };
+       };
+
+       sram: sram@00300000 {
+               compatible = "mmio-sram";
+               reg = <0x00300000 0x10000>;
+       };
+
+       ahb {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               apb {
+                       compatible = "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       aic: interrupt-controller@fffff000 {
+                               #interrupt-cells = <3>;
+                               compatible = "atmel,at91rm9200-aic";
+                               interrupt-controller;
+                               reg = <0xfffff000 0x200>;
+                               atmel,external-irqs = <31>;
+                       };
+
+                       ramc0: ramc@ffffe400 {
+                               compatible = "atmel,at91sam9g45-ddramc";
+                               reg = <0xffffe400 0x200>;
+                               clocks = <&ddrck>;
+                               clock-names = "ddrck";
+                       };
+
+                       ramc1: ramc@ffffe600 {
+                               compatible = "atmel,at91sam9g45-ddramc";
+                               reg = <0xffffe600 0x200>;
+                               clocks = <&ddrck>;
+                               clock-names = "ddrck";
+                       };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9g45-pmc", "syscon";
+                               reg = <0xfffffc00 0x100>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               interrupt-controller;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               #interrupt-cells = <1>;
+
+                               main_osc: main_osc {
+                                       compatible = "atmel,at91rm9200-clk-main-osc";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+                                       clocks = <&main_xtal>;
+                               };
+
+                               main: mainck {
+                                       compatible = "atmel,at91rm9200-clk-main";
+                                       #clock-cells = <0>;
+                                       clocks = <&main_osc>;
+                               };
+
+                               plla: pllack {
+                                       compatible = "atmel,at91rm9200-clk-pll";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+                                       clocks = <&main>;
+                                       reg = <0>;
+                                       atmel,clk-input-range = <2000000 32000000>;
+                                       #atmel,pll-clk-output-range-cells = <4>;
+                                       atmel,pll-clk-output-ranges = <745000000 800000000 0 0
+                                                                      695000000 750000000 1 0
+                                                                      645000000 700000000 2 0
+                                                                      595000000 650000000 3 0
+                                                                      545000000 600000000 0 1
+                                                                      495000000 555000000 1 1
+                                                                      445000000 500000000 2 1
+                                                                      400000000 450000000 3 1>;
+                               };
+
+                               plladiv: plladivck {
+                                       compatible = "atmel,at91sam9x5-clk-plldiv";
+                                       #clock-cells = <0>;
+                                       clocks = <&plla>;
+                               };
+
+                               utmi: utmick {
+                                       compatible = "atmel,at91sam9x5-clk-utmi";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_LOCKU>;
+                                       clocks = <&main>;
+                               };
+
+                               mck: masterck {
+                                       compatible = "atmel,at91rm9200-clk-master";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+                                       clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+                                       atmel,clk-output-range = <0 133333333>;
+                                       atmel,clk-divisors = <1 2 4 3>;
+                               };
+
+                               usb: usbck {
+                                       compatible = "atmel,at91sam9x5-clk-usb";
+                                       #clock-cells = <0>;
+                                       clocks = <&plladiv>, <&utmi>;
+                               };
+
+                               prog: progck {
+                                       compatible = "atmel,at91sam9g45-clk-programmable";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       interrupt-parent = <&pmc>;
+                                       clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+                                       prog0: prog0 {
+                                               #clock-cells = <0>;
+                                               reg = <0>;
+                                               interrupts = <AT91_PMC_PCKRDY(0)>;
+                                       };
+
+                                       prog1: prog1 {
+                                               #clock-cells = <0>;
+                                               reg = <1>;
+                                               interrupts = <AT91_PMC_PCKRDY(1)>;
+                                       };
+                               };
+
+                               systemck {
+                                       compatible = "atmel,at91rm9200-clk-system";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       ddrck: ddrck {
+                                               #clock-cells = <0>;
+                                               reg = <2>;
+                                               clocks = <&mck>;
+                                       };
+
+                                       uhpck: uhpck {
+                                               #clock-cells = <0>;
+                                               reg = <6>;
+                                               clocks = <&usb>;
+                                       };
+
+                                       pck0: pck0 {
+                                               #clock-cells = <0>;
+                                               reg = <8>;
+                                               clocks = <&prog0>;
+                                       };
+
+                                       pck1: pck1 {
+                                               #clock-cells = <0>;
+                                               reg = <9>;
+                                               clocks = <&prog1>;
+                                       };
+                               };
+
+                               periphck {
+                                       compatible = "atmel,at91rm9200-clk-peripheral";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       clocks = <&mck>;
+
+                                       pioA_clk: pioA_clk {
+                                               #clock-cells = <0>;
+                                               reg = <2>;
+                                       };
+
+                                       pioB_clk: pioB_clk {
+                                               #clock-cells = <0>;
+                                               reg = <3>;
+                                       };
+
+                                       pioC_clk: pioC_clk {
+                                               #clock-cells = <0>;
+                                               reg = <4>;
+                                       };
+
+                                       pioDE_clk: pioDE_clk {
+                                               #clock-cells = <0>;
+                                               reg = <5>;
+                                       };
+
+                                       trng_clk: trng_clk {
+                                               #clock-cells = <0>;
+                                               reg = <6>;
+                                       };
+
+                                       usart0_clk: usart0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <7>;
+                                       };
+
+                                       usart1_clk: usart1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <8>;
+                                       };
+
+                                       usart2_clk: usart2_clk {
+                                               #clock-cells = <0>;
+                                               reg = <9>;
+                                       };
+
+                                       usart3_clk: usart3_clk {
+                                               #clock-cells = <0>;
+                                               reg = <10>;
+                                       };
+
+                                       mci0_clk: mci0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <11>;
+                                       };
+
+                                       twi0_clk: twi0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <12>;
+                                       };
+
+                                       twi1_clk: twi1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <13>;
+                                       };
+
+                                       spi0_clk: spi0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <14>;
+                                       };
+
+                                       spi1_clk: spi1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <15>;
+                                       };
+
+                                       ssc0_clk: ssc0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <16>;
+                                       };
+
+                                       ssc1_clk: ssc1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <17>;
+                                       };
+
+                                       tcb0_clk: tcb0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <18>;
+                                       };
+
+                                       pwm_clk: pwm_clk {
+                                               #clock-cells = <0>;
+                                               reg = <19>;
+                                       };
+
+                                       adc_clk: adc_clk {
+                                               #clock-cells = <0>;
+                                               reg = <20>;
+                                       };
+
+                                       dma0_clk: dma0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <21>;
+                                       };
+
+                                       uhphs_clk: uhphs_clk {
+                                               #clock-cells = <0>;
+                                               reg = <22>;
+                                       };
+
+                                       lcd_clk: lcd_clk {
+                                               #clock-cells = <0>;
+                                               reg = <23>;
+                                       };
+
+                                       ac97_clk: ac97_clk {
+                                               #clock-cells = <0>;
+                                               reg = <24>;
+                                       };
+
+                                       macb0_clk: macb0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <25>;
+                                       };
+
+                                       isi_clk: isi_clk {
+                                               #clock-cells = <0>;
+                                               reg = <26>;
+                                       };
+
+                                       udphs_clk: udphs_clk {
+                                               #clock-cells = <0>;
+                                               reg = <27>;
+                                       };
+
+                                       aestdessha_clk: aestdessha_clk {
+                                               #clock-cells = <0>;
+                                               reg = <28>;
+                                       };
+
+                                       mci1_clk: mci1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <29>;
+                                       };
+
+                                       vdec_clk: vdec_clk {
+                                               #clock-cells = <0>;
+                                               reg = <30>;
+                                       };
+                               };
+                       };
+
+                       rstc@fffffd00 {
+                               compatible = "atmel,at91sam9g45-rstc";
+                               reg = <0xfffffd00 0x10>;
+                               clocks = <&clk32k>;
+                       };
+
+                       pit: timer@fffffd30 {
+                               compatible = "atmel,at91sam9260-pit";
+                               reg = <0xfffffd30 0xf>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&mck>;
+                       };
+
+
+                       shdwc@fffffd10 {
+                               compatible = "atmel,at91sam9rl-shdwc";
+                               reg = <0xfffffd10 0x10>;
+                               clocks = <&clk32k>;
+                       };
+
+                       tcb0: timer@fff7c000 {
+                               compatible = "atmel,at91rm9200-tcb";
+                               reg = <0xfff7c000 0x100>;
+                               interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+                               clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+                       };
+
+                       tcb1: timer@fffd4000 {
+                               compatible = "atmel,at91rm9200-tcb";
+                               reg = <0xfffd4000 0x100>;
+                               interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+                               clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
+                       };
+
+                       dma: dma-controller@ffffec00 {
+                               compatible = "atmel,at91sam9g45-dma";
+                               reg = <0xffffec00 0x200>;
+                               interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
+                               #dma-cells = <2>;
+                               clocks = <&dma0_clk>;
+                               clock-names = "dma_clk";
+                       };
+
+                       pinctrl@fffff200 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+                               ranges = <0xfffff200 0xfffff200 0xa00>;
+
+                               atmel,mux-mask = <
+                                     /*    A         B     */
+                                      0xffffffff 0xffc003ff  /* pioA */
+                                      0xffffffff 0x800f8f00  /* pioB */
+                                      0xffffffff 0x00000e00  /* pioC */
+                                      0xffffffff 0xff0c1381  /* pioD */
+                                      0xffffffff 0x81ffff81  /* pioE */
+                                     >;
+
+                               /* shared pinctrl settings */
+                               adc0 {
+                                       pinctrl_adc0_adtrg: adc0_adtrg {
+                                               atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad0: adc0_ad0 {
+                                               atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad1: adc0_ad1 {
+                                               atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad2: adc0_ad2 {
+                                               atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad3: adc0_ad3 {
+                                               atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad4: adc0_ad4 {
+                                               atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad5: adc0_ad5 {
+                                               atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad6: adc0_ad6 {
+                                               atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                                       pinctrl_adc0_ad7: adc0_ad7 {
+                                               atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               dbgu {
+                                       pinctrl_dbgu: dbgu-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB12 periph A */
+                                                        AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */
+                                       };
+                               };
+
+                               i2c0 {
+                                       pinctrl_i2c0: i2c0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA21 periph A TWCK0 */
+                                                        AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */
+                                       };
+                               };
+
+                               i2c1 {
+                                       pinctrl_i2c1: i2c1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB11 periph A TWCK1 */
+                                                        AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */
+                                       };
+                               };
+
+                               isi {
+                                       pinctrl_isi_data_0_7: isi-0-data-0-7 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+                                                       AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+                                                       AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+                                                       AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+                                                       AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+                                                       AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+                                                       AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+                                                       AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+                                                       AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+                                                       AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+                                                       AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+                                       };
+
+                                       pinctrl_isi_data_8_9: isi-0-data-8-9 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+                                                       AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+                                       };
+
+                                       pinctrl_isi_data_10_11: isi-0-data-10-11 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+                                                       AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
+                                       };
+                               };
+
+                               usart0 {
+                                       pinctrl_usart0: usart0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PB19 periph A with pullup */
+                                                        AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB18 periph A */
+                                       };
+
+                                       pinctrl_usart0_rts: usart0_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 17 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB17 periph B */
+                                       };
+
+                                       pinctrl_usart0_cts: usart0_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB15 periph B */
+                                       };
+                               };
+
+                               uart1 {
+                                       pinctrl_usart1: usart1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB4 periph A with pullup */
+                                                        AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB5 periph A */
+                                       };
+
+                                       pinctrl_usart1_rts: usart1_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD16 periph A */
+                                       };
+
+                                       pinctrl_usart1_cts: usart1_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD17 periph A */
+                                       };
+                               };
+
+                               usart2 {
+                                       pinctrl_usart2: usart2-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB6 periph A with pullup */
+                                                        AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB7 periph A */
+                                       };
+
+                                       pinctrl_usart2_rts: usart2_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;  /* PC9 periph B */
+                                       };
+
+                                       pinctrl_usart2_cts: usart2_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC11 periph B */
+                                       };
+                               };
+
+                               usart3 {
+                                       pinctrl_usart3: usart3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PB9 periph A with pullup */
+                                                        AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB8 periph A */
+                                       };
+
+                                       pinctrl_usart3_rts: usart3_rts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B */
+                                       };
+
+                                       pinctrl_usart3_cts: usart3_cts-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA24 periph B */
+                                       };
+                               };
+
+                               nand {
+                                       pinctrl_nand: nand-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP      /* PC8 gpio RDY pin pull_up*/
+                                                        AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PC14 gpio enable pin pull_up */
+                                       };
+                               };
+
+                               macb {
+                                       pinctrl_macb_rmii: macb_rmii-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA10 periph A */
+                                                        AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA11 periph A */
+                                                        AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA12 periph A */
+                                                        AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA13 periph A */
+                                                        AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA14 periph A */
+                                                        AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA15 periph A */
+                                                        AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA16 periph A */
+                                                        AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA17 periph A */
+                                                        AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA18 periph A */
+                                                        AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA19 periph A */
+                                       };
+
+                                       pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA6 periph B */
+                                                        AT91_PIOA 7 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA7 periph B */
+                                                        AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA8 periph B */
+                                                        AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE    /* PA9 periph B */
+                                                        AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA27 periph B */
+                                                        AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA28 periph B */
+                                                        AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE   /* PA29 periph B */
+                                                        AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA30 periph B */
+                                       };
+                               };
+
+                               mmc0 {
+                                       pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PA0 periph A */
+                                                        AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA1 periph A with pullup */
+                                                        AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA2 periph A with pullup */
+                                       };
+
+                                       pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA3 periph A with pullup */
+                                                        AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA4 periph A with pullup */
+                                                        AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA5 periph A with pullup */
+                                       };
+
+                                       pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA6 periph A with pullup */
+                                                        AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA7 periph A with pullup */
+                                                        AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA8 periph A with pullup */
+                                                        AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;       /* PA9 periph A with pullup */
+                                       };
+                               };
+
+                               mmc1 {
+                                       pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PA31 periph A */
+                                                        AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA22 periph A with pullup */
+                                                        AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA23 periph A with pullup */
+                                       };
+
+                                       pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA24 periph A with pullup */
+                                                        AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA25 periph A with pullup */
+                                                        AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA26 periph A with pullup */
+                                       };
+
+                                       pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA27 periph A with pullup */
+                                                        AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA28 periph A with pullup */
+                                                        AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP        /* PA29 periph A with pullup */
+                                                        AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;      /* PA30 periph A with pullup */
+                                       };
+                               };
+
+                               ssc0 {
+                                       pinctrl_ssc0_tx: ssc0_tx-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD0 periph A */
+                                                        AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD1 periph A */
+                                                        AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD2 periph A */
+                                       };
+
+                                       pinctrl_ssc0_rx: ssc0_rx-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD3 periph A */
+                                                        AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PD4 periph A */
+                                                        AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PD5 periph A */
+                                       };
+                               };
+
+                               ssc1 {
+                                       pinctrl_ssc1_tx: ssc1_tx-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD10 periph A */
+                                                        AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD11 periph A */
+                                                        AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD12 periph A */
+                                       };
+
+                                       pinctrl_ssc1_rx: ssc1_rx-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD13 periph A */
+                                                        AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PD14 periph A */
+                                                        AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD15 periph A */
+                                       };
+                               };
+
+                               spi0 {
+                                       pinctrl_spi0: spi0-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB0 periph A SPI0_MISO pin */
+                                                        AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PB1 periph A SPI0_MOSI pin */
+                                                        AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;  /* PB2 periph A SPI0_SPCK pin */
+                                       };
+                               };
+
+                               spi1 {
+                                       pinctrl_spi1: spi1-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB14 periph A SPI1_MISO pin */
+                                                        AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PB15 periph A SPI1_MOSI pin */
+                                                        AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB16 periph A SPI1_SPCK pin */
+                                       };
+                               };
+
+                               tcb0 {
+                                       pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+                                               atmel,pins = <AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+                                               atmel,pins = <AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+                                               atmel,pins = <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+                                               atmel,pins = <AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+                                               atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+                                               atmel,pins = <AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+                                               atmel,pins = <AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+                                               atmel,pins = <AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+                                               atmel,pins = <AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               tcb1 {
+                                       pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
+                                               atmel,pins = <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
+                                               atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
+                                               atmel,pins = <AT91_PIOD 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
+                                               atmel,pins = <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
+                                               atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
+                                               atmel,pins = <AT91_PIOD 7 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
+                                               atmel,pins = <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
+                                               atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
+                                               atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+                               };
+
+                               fb {
+                                       pinctrl_fb: fb-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE0 periph A */
+                                                        AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE2 periph A */
+                                                        AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE3 periph A */
+                                                        AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE4 periph A */
+                                                        AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE5 periph A */
+                                                        AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE6 periph A */
+                                                        AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE7 periph A */
+                                                        AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE8 periph A */
+                                                        AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE    /* PE9 periph A */
+                                                        AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE10 periph A */
+                                                        AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE11 periph A */
+                                                        AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE12 periph A */
+                                                        AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE13 periph A */
+                                                        AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE14 periph A */
+                                                        AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE15 periph A */
+                                                        AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE16 periph A */
+                                                        AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE17 periph A */
+                                                        AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE18 periph A */
+                                                        AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE19 periph A */
+                                                        AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE20 periph A */
+                                                        AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE21 periph A */
+                                                        AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE22 periph A */
+                                                        AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE23 periph A */
+                                                        AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE24 periph A */
+                                                        AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE25 periph A */
+                                                        AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE26 periph A */
+                                                        AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE27 periph A */
+                                                        AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE28 periph A */
+                                                        AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE   /* PE29 periph A */
+                                                        AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */
+                                       };
+                               };
+
+                               pioA: gpio@fffff200 {
+                                       compatible = "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff200 0x200>;
+                                       interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                                       clocks = <&pioA_clk>;
+                               };
+
+                               pioB: gpio@fffff400 {
+                                       compatible = "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff400 0x200>;
+                                       interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                                       clocks = <&pioB_clk>;
+                               };
+
+                               pioC: gpio@fffff600 {
+                                       compatible = "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff600 0x200>;
+                                       interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                                       clocks = <&pioC_clk>;
+                               };
+
+                               pioD: gpio@fffff800 {
+                                       compatible = "atmel,at91rm9200-gpio";
+                                       reg = <0xfffff800 0x200>;
+                                       interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                                       clocks = <&pioDE_clk>;
+                               };
+
+                               pioE: gpio@fffffa00 {
+                                       compatible = "atmel,at91rm9200-gpio";
+                                       reg = <0xfffffa00 0x200>;
+                                       interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+                                       #gpio-cells = <2>;
+                                       gpio-controller;
+                                       interrupt-controller;
+                                       #interrupt-cells = <2>;
+                                       clocks = <&pioDE_clk>;
+                               };
+                       };
+
+                       dbgu: serial@ffffee00 {
+                               compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+                               reg = <0xffffee00 0x200>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_dbgu>;
+                               clocks = <&mck>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart0: serial@fff8c000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff8c000 0x200>;
+                               interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart0>;
+                               clocks = <&usart0_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart1: serial@fff90000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff90000 0x200>;
+                               interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart1>;
+                               clocks = <&usart1_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart2: serial@fff94000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff94000 0x200>;
+                               interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart2>;
+                               clocks = <&usart2_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       usart3: serial@fff98000 {
+                               compatible = "atmel,at91sam9260-usart";
+                               reg = <0xfff98000 0x200>;
+                               interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
+                               atmel,use-dma-rx;
+                               atmel,use-dma-tx;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_usart3>;
+                               clocks = <&usart3_clk>;
+                               clock-names = "usart";
+                               status = "disabled";
+                       };
+
+                       macb0: ethernet@fffbc000 {
+                               compatible = "cdns,at91sam9260-macb", "cdns,macb";
+                               reg = <0xfffbc000 0x100>;
+                               interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_macb_rmii>;
+                               clocks = <&macb0_clk>, <&macb0_clk>;
+                               clock-names = "hclk", "pclk";
+                               status = "disabled";
+                       };
+
+                       trng@fffcc000 {
+                               compatible = "atmel,at91sam9g45-trng";
+                               reg = <0xfffcc000 0x4000>;
+                               interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&trng_clk>;
+                       };
+
+                       i2c0: i2c@fff84000 {
+                               compatible = "atmel,at91sam9g10-i2c";
+                               reg = <0xfff84000 0x100>;
+                               interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_i2c0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               clocks = <&twi0_clk>;
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@fff88000 {
+                               compatible = "atmel,at91sam9g10-i2c";
+                               reg = <0xfff88000 0x100>;
+                               interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_i2c1>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               clocks = <&twi1_clk>;
+                               status = "disabled";
+                       };
+
+                       ssc0: ssc@fff9c000 {
+                               compatible = "atmel,at91sam9g45-ssc";
+                               reg = <0xfff9c000 0x4000>;
+                               interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+                               clocks = <&ssc0_clk>;
+                               clock-names = "pclk";
+                               status = "disabled";
+                       };
+
+                       ssc1: ssc@fffa0000 {
+                               compatible = "atmel,at91sam9g45-ssc";
+                               reg = <0xfffa0000 0x4000>;
+                               interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+                               clocks = <&ssc1_clk>;
+                               clock-names = "pclk";
+                               status = "disabled";
+                       };
+
+                       adc0: adc@fffb0000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91sam9g45-adc";
+                               reg = <0xfffb0000 0x100>;
+                               interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&adc_clk>, <&adc_op_clk>;
+                               clock-names = "adc_clk", "adc_op_clk";
+                               atmel,adc-channels-used = <0xff>;
+                               atmel,adc-vref = <3300>;
+                               atmel,adc-startup-time = <40>;
+                               atmel,adc-res = <8 10>;
+                               atmel,adc-res-names = "lowres", "highres";
+                               atmel,adc-use-res = "highres";
+
+                               trigger@0 {
+                                       reg = <0>;
+                                       trigger-name = "external-rising";
+                                       trigger-value = <0x1>;
+                                       trigger-external;
+                               };
+                               trigger@1 {
+                                       reg = <1>;
+                                       trigger-name = "external-falling";
+                                       trigger-value = <0x2>;
+                                       trigger-external;
+                               };
+
+                               trigger@2 {
+                                       reg = <2>;
+                                       trigger-name = "external-any";
+                                       trigger-value = <0x3>;
+                                       trigger-external;
+                               };
+
+                               trigger@3 {
+                                       reg = <3>;
+                                       trigger-name = "continuous";
+                                       trigger-value = <0x6>;
+                               };
+                       };
+
+                       isi@fffb4000 {
+                               compatible = "atmel,at91sam9g45-isi";
+                               reg = <0xfffb4000 0x4000>;
+                               interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+                               clocks = <&isi_clk>;
+                               clock-names = "isi_clk";
+                               status = "disabled";
+                               port {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                               };
+                       };
+
+                       pwm0: pwm@fffb8000 {
+                               compatible = "atmel,at91sam9rl-pwm";
+                               reg = <0xfffb8000 0x300>;
+                               interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+                               #pwm-cells = <3>;
+                               clocks = <&pwm_clk>;
+                               status = "disabled";
+                       };
+
+                       mmc0: mmc@fff80000 {
+                               compatible = "atmel,hsmci";
+                               reg = <0xfff80000 0x600>;
+                               interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+                               pinctrl-names = "default";
+                               dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
+                               dma-names = "rxtx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               clocks = <&mci0_clk>;
+                               clock-names = "mci_clk";
+                               status = "disabled";
+                       };
+
+                       mmc1: mmc@fffd0000 {
+                               compatible = "atmel,hsmci";
+                               reg = <0xfffd0000 0x600>;
+                               interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
+                               pinctrl-names = "default";
+                               dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
+                               dma-names = "rxtx";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               clocks = <&mci1_clk>;
+                               clock-names = "mci_clk";
+                               status = "disabled";
+                       };
+
+                       watchdog@fffffd40 {
+                               compatible = "atmel,at91sam9260-wdt";
+                               reg = <0xfffffd40 0x10>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
+                               atmel,watchdog-type = "hardware";
+                               atmel,reset-type = "all";
+                               atmel,dbg-halt;
+                               status = "disabled";
+                       };
+
+                       spi0: spi@fffa4000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91rm9200-spi";
+                               reg = <0xfffa4000 0x200>;
+                               interrupts = <14 4 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_spi0>;
+                               clocks = <&spi0_clk>;
+                               clock-names = "spi_clk";
+                               status = "disabled";
+                       };
+
+                       spi1: spi@fffa8000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91rm9200-spi";
+                               reg = <0xfffa8000 0x200>;
+                               interrupts = <15 4 3>;
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_spi1>;
+                               clocks = <&spi1_clk>;
+                               clock-names = "spi_clk";
+                               status = "disabled";
+                       };
+
+                       usb2: gadget@fff78000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "atmel,at91sam9g45-udc";
+                               reg = <0x00600000 0x80000
+                                      0xfff78000 0x400>;
+                               interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&udphs_clk>, <&utmi>;
+                               clock-names = "pclk", "hclk";
+                               status = "disabled";
+
+                               ep0 {
+                                       reg = <0>;
+                                       atmel,fifo-size = <64>;
+                                       atmel,nb-banks = <1>;
+                               };
+
+                               ep1 {
+                                       reg = <1>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <2>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+
+                               ep2 {
+                                       reg = <2>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <2>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+
+                               ep3 {
+                                       reg = <3>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                               };
+
+                               ep4 {
+                                       reg = <4>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                               };
+
+                               ep5 {
+                                       reg = <5>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+
+                               ep6 {
+                                       reg = <6>;
+                                       atmel,fifo-size = <1024>;
+                                       atmel,nb-banks = <3>;
+                                       atmel,can-dma;
+                                       atmel,can-isoc;
+                               };
+                       };
+
+                       sckc@fffffd50 {
+                               compatible = "atmel,at91sam9x5-sckc";
+                               reg = <0xfffffd50 0x4>;
+
+                               slow_osc: slow_osc {
+                                       compatible = "atmel,at91sam9x5-clk-slow-osc";
+                                       #clock-cells = <0>;
+                                       atmel,startup-time-usec = <1200000>;
+                                       clocks = <&slow_xtal>;
+                               };
+
+                               slow_rc_osc: slow_rc_osc {
+                                       compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+                                       #clock-cells = <0>;
+                                       atmel,startup-time-usec = <75>;
+                                       clock-frequency = <32768>;
+                                       clock-accuracy = <50000000>;
+                               };
+
+                               clk32k: slck {
+                                       compatible = "atmel,at91sam9x5-clk-slow";
+                                       #clock-cells = <0>;
+                                       clocks = <&slow_rc_osc &slow_osc>;
+                               };
+                       };
+
+                       rtc@fffffd20 {
+                               compatible = "atmel,at91sam9260-rtt";
+                               reg = <0xfffffd20 0x10>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
+                               status = "disabled";
+                       };
+
+                       rtc@fffffdb0 {
+                               compatible = "atmel,at91rm9200-rtc";
+                               reg = <0xfffffdb0 0x30>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
+                               status = "disabled";
+                       };
+
+                       gpbr: syscon@fffffd60 {
+                               compatible = "atmel,at91sam9260-gpbr", "syscon";
+                               reg = <0xfffffd60 0x10>;
+                               status = "disabled";
+                       };
+               };
+
+               fb0: fb@0x00500000 {
+                       compatible = "atmel,at91sam9g45-lcdc";
+                       reg = <0x00500000 0x1000>;
+                       interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_fb>;
+                       clocks = <&lcd_clk>, <&lcd_clk>;
+                       clock-names = "hclk", "lcdc_clk";
+                       status = "disabled";
+               };
+
+               nand0: nand@40000000 {
+                       compatible = "atmel,at91rm9200-nand";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x40000000 0x10000000
+                              0xffffe200 0x200
+                             >;
+                       atmel,nand-addr-offset = <21>;
+                       atmel,nand-cmd-offset = <22>;
+                       atmel,nand-has-dma;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_nand>;
+                       gpios = <&pioC 8 GPIO_ACTIVE_HIGH
+                                &pioC 14 GPIO_ACTIVE_HIGH
+                                0
+                               >;
+                       status = "disabled";
+               };
+
+               usb0: ohci@00700000 {
+                       compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                       reg = <0x00700000 0x100000>;
+                       interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+                       clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+                       clock-names = "ohci_clk", "hclk", "uhpck";
+                       status = "disabled";
+               };
+
+               usb1: ehci@00800000 {
+                       compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+                       reg = <0x00800000 0x100000>;
+                       interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+                       clocks = <&utmi>, <&uhphs_clk>;
+                       clock-names = "usb_clk", "ehci_clk";
+                       status = "disabled";
+               };
+       };
+
+       i2c@0 {
+               compatible = "i2c-gpio";
+               gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
+                        &pioA 21 GPIO_ACTIVE_HIGH /* scl */
+                       >;
+               i2c-gpio,sda-open-drain;
+               i2c-gpio,scl-open-drain;
+               i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+               #address-cells = <1>;
+               #size-cells = <0>;
+               status = "disabled";
+       };
+};
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
new file mode 100644 (file)
index 0000000..ab3ee24
--- /dev/null
@@ -0,0 +1,23 @@
+/*
+ * This header provides constants for AT91 pmc status.
+ *
+ * The constants defined in this header are being used in dts.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _DT_BINDINGS_CLK_AT91_H
+#define _DT_BINDINGS_CLK_AT91_H
+
+#define AT91_PMC_MOSCS         0               /* MOSCS Flag */
+#define AT91_PMC_LOCKA         1               /* PLLA Lock */
+#define AT91_PMC_LOCKB         2               /* PLLB Lock */
+#define AT91_PMC_MCKRDY                3               /* Master Clock */
+#define AT91_PMC_LOCKU         6               /* UPLL Lock */
+#define AT91_PMC_PCKRDY(id)    (8 + (id))      /* Programmable Clock */
+#define AT91_PMC_MOSCSELS      16              /* Main Oscillator Selection */
+#define AT91_PMC_MOSCRCS       17              /* Main On-Chip RC */
+#define AT91_PMC_CFDEV         18              /* Clock Failure Detector Event */
+#define AT91_PMC_GCKRDY                24              /* Generated Clocks */
+
+#endif
diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h
new file mode 100644 (file)
index 0000000..ab6cbba
--- /dev/null
@@ -0,0 +1,52 @@
+/*
+ * This header provides macros for at91 dma bindings.
+ *
+ * Copyright (C) 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __DT_BINDINGS_AT91_DMA_H__
+#define __DT_BINDINGS_AT91_DMA_H__
+
+/* ---------- HDMAC ---------- */
+
+/*
+ * Source and/or destination peripheral ID
+ */
+#define AT91_DMA_CFG_PER_ID_MASK       (0xff)
+#define AT91_DMA_CFG_PER_ID(id)                (id & AT91_DMA_CFG_PER_ID_MASK)
+
+/*
+ * FIFO configuration: it defines when a request is serviced.
+ */
+#define AT91_DMA_CFG_FIFOCFG_OFFSET    (8)
+#define AT91_DMA_CFG_FIFOCFG_MASK      (0xf << AT91_DMA_CFG_FIFOCFG_OFFSET)
+#define AT91_DMA_CFG_FIFOCFG_HALF      (0x0 << AT91_DMA_CFG_FIFOCFG_OFFSET)    /* half FIFO (default behavior) */
+#define AT91_DMA_CFG_FIFOCFG_ALAP      (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET)    /* largest defined AHB burst */
+#define AT91_DMA_CFG_FIFOCFG_ASAP      (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET)    /* single AHB access */
+
+
+/* ---------- XDMAC ---------- */
+#define AT91_XDMAC_DT_MEM_IF_MASK      (0x1)
+#define AT91_XDMAC_DT_MEM_IF_OFFSET    (13)
+#define AT91_XDMAC_DT_MEM_IF(mem_if)   (((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \
+                                       << AT91_XDMAC_DT_MEM_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_MEM_IF(cfg)  (((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \
+                                       & AT91_XDMAC_DT_MEM_IF_MASK)
+
+#define AT91_XDMAC_DT_PER_IF_MASK      (0x1)
+#define AT91_XDMAC_DT_PER_IF_OFFSET    (14)
+#define AT91_XDMAC_DT_PER_IF(per_if)   (((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \
+                                       << AT91_XDMAC_DT_PER_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_PER_IF(cfg)  (((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \
+                                       & AT91_XDMAC_DT_PER_IF_MASK)
+
+#define AT91_XDMAC_DT_PERID_MASK       (0x7f)
+#define AT91_XDMAC_DT_PERID_OFFSET     (24)
+#define AT91_XDMAC_DT_PERID(perid)     (((perid) & AT91_XDMAC_DT_PERID_MASK) \
+                                       << AT91_XDMAC_DT_PERID_OFFSET)
+#define AT91_XDMAC_DT_GET_PERID(cfg)   (((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \
+                                       & AT91_XDMAC_DT_PERID_MASK)
+
+#endif /* __DT_BINDINGS_AT91_DMA_H__ */
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
new file mode 100644 (file)
index 0000000..bbca3d0
--- /dev/null
@@ -0,0 +1,40 @@
+/*
+ * This header provides constants for most at91 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef __DT_BINDINGS_AT91_PINCTRL_H__
+#define __DT_BINDINGS_AT91_PINCTRL_H__
+
+#define AT91_PINCTRL_NONE              (0 << 0)
+#define AT91_PINCTRL_PULL_UP           (1 << 0)
+#define AT91_PINCTRL_MULTI_DRIVE       (1 << 1)
+#define AT91_PINCTRL_DEGLITCH          (1 << 2)
+#define AT91_PINCTRL_PULL_DOWN         (1 << 3)
+#define AT91_PINCTRL_DIS_SCHMIT                (1 << 4)
+#define AT91_PINCTRL_DEBOUNCE          (1 << 16)
+#define AT91_PINCTRL_DEBOUNCE_VAL(x)   (x << 17)
+
+#define AT91_PINCTRL_PULL_UP_DEGLITCH  (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
+
+#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT            (0x0 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_LOW                        (0x1 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_MED                        (0x2 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_HI                 (0x3 << 5)
+
+#define AT91_PIOA      0
+#define AT91_PIOB      1
+#define AT91_PIOC      2
+#define AT91_PIOD      3
+#define AT91_PIOE      4
+
+#define AT91_PERIPH_GPIO       0
+#define AT91_PERIPH_A          1
+#define AT91_PERIPH_B          2
+#define AT91_PERIPH_C          3
+#define AT91_PERIPH_D          4
+
+#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */