--- /dev/null
+#
+# Copyright (c) 2017 Imagination Technologies Ltd.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PHONY := __archpost
+__archpost:
+
+-include include/config/auto.conf
+include scripts/Kbuild.include
+
+CMD_RELOCS = tools/mips-relocs
+quiet_cmd_relocs = RELOCS $@
+ cmd_relocs = $(CMD_RELOCS) $@
+
+u-boot: FORCE
+ @true
+ $(call if_changed,relocs)
+
+.PHONY: FORCE
+
+FORCE:
# LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
# MODFLAGS += -mlong-calls
#
-# On the other hand, we want PIC in the U-Boot code to relocate it from ROM
-# to RAM. $28 is always used as gp.
-#
-ifdef CONFIG_SPL_BUILD
-PF_ABICALLS := -mno-abicalls
-PF_PIC := -fno-pic
-PF_PIE :=
-else
-PF_ABICALLS := -mabicalls
-PF_PIC := -fpic
-PF_PIE := -pie
-PF_OBJCOPY := -j .got -j .rel.dyn -j .padding
-PF_OBJCOPY += -j .dtb.init.rodata
+ifndef CONFIG_SPL_BUILD
+OBJCOPYFLAGS += -j .got -j .rel -j .padding -j .dtb.init.rodata
+LDFLAGS_FINAL += --emit-relocs
endif
-PLATFORM_CPPFLAGS += -G 0 $(PF_ABICALLS) $(PF_PIC)
+PLATFORM_CPPFLAGS += -G 0 -mno-abicalls -fno-pic
PLATFORM_CPPFLAGS += -msoft-float
PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
-LDFLAGS_FINAL += --gc-sections $(PF_PIE)
+LDFLAGS_FINAL += --gc-sections
OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list
-OBJCOPYFLAGS += $(PF_OBJCOPY)
ehb
#endif
- /*
- * Initialize $gp, force pointer sized alignment of bal instruction to
- * forbid the compiler to put nop's between bal and _gp. This is
- * required to keep _gp and ra aligned to 8 byte.
- */
- .align PTRLOG
- bal 1f
- nop
- PTR _gp
-1:
- PTR_L gp, 0(ra)
-
#ifdef CONFIG_MIPS_CM
PTR_LA t9, mips_cm_map
jalr t9
move ra, zero
END(_start)
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * a0 = addr_sp
- * a1 = gd
- * a2 = destination address
- */
-ENTRY(relocate_code)
- move sp, a0 # set new stack pointer
- move fp, sp
-
- move s0, a1 # save gd in s0
- move s2, a2 # save destination address in s2
-
- PTR_LI t0, CONFIG_SYS_MONITOR_BASE
- PTR_SUB s1, s2, t0 # s1 <-- relocation offset
-
- PTR_LA t2, __image_copy_end
- move t1, a2
-
- /*
- * t0 = source address
- * t1 = target address
- * t2 = source end address
- */
-1:
- PTR_L t3, 0(t0)
- PTR_S t3, 0(t1)
- PTR_ADDU t0, PTRSIZE
- blt t0, t2, 1b
- PTR_ADDU t1, PTRSIZE
-
- /*
- * Now we want to update GOT.
- *
- * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
- * generated by GNU ld. Skip these reserved entries from relocation.
- */
- PTR_LA t3, num_got_entries
- PTR_LA t8, _GLOBAL_OFFSET_TABLE_
- PTR_ADD t8, s1 # t8 now holds relocated _G_O_T_
- PTR_ADDIU t8, t8, 2 * PTRSIZE # skipping first two entries
- PTR_LI t2, 2
-1:
- PTR_L t1, 0(t8)
- beqz t1, 2f
- PTR_ADD t1, s1
- PTR_S t1, 0(t8)
-2:
- PTR_ADDIU t2, 1
- blt t2, t3, 1b
- PTR_ADDIU t8, PTRSIZE
-
- /* Update dynamic relocations */
- PTR_LA t1, __rel_dyn_start
- PTR_LA t2, __rel_dyn_end
-
- b 2f # skip first reserved entry
- PTR_ADDIU t1, 2 * PTRSIZE
-
-1:
- lw t8, -4(t1) # t8 <-- relocation info
-
- PTR_LI t3, MIPS_RELOC
- bne t8, t3, 2f # skip non-MIPS_RELOC entries
- nop
-
- PTR_L t3, -(2 * PTRSIZE)(t1) # t3 <-- location to fix up in FLASH
-
- PTR_L t8, 0(t3) # t8 <-- original pointer
- PTR_ADD t8, s1 # t8 <-- adjusted pointer
-
- PTR_ADD t3, s1 # t3 <-- location to fix up in RAM
- PTR_S t8, 0(t3)
-
-2:
- blt t1, t2, 1b
- PTR_ADDIU t1, 2 * PTRSIZE # each rel.dyn entry is 2*PTRSIZE bytes
-
- /*
- * Flush caches to ensure our newly modified instructions are visible
- * to the instruction cache. We're still running with the old GOT, so
- * apply the reloc offset to the start address.
- */
- PTR_LA a0, __text_start
- PTR_LA a1, __text_end
- PTR_SUB a1, a1, a0
- PTR_LA t9, flush_cache
- jalr t9
- PTR_ADD a0, s1
-
- PTR_ADD gp, s1 # adjust gp
-
- /*
- * Clear BSS
- *
- * GOT is now relocated. Thus __bss_start and __bss_end can be
- * accessed directly via $gp.
- */
- PTR_LA t1, __bss_start # t1 <-- __bss_start
- PTR_LA t2, __bss_end # t2 <-- __bss_end
-
-1:
- PTR_S zero, 0(t1)
- blt t1, t2, 1b
- PTR_ADDIU t1, PTRSIZE
-
- move a0, s0 # a0 <-- gd
- move a1, s2
- PTR_LA t9, board_init_r
- jr t9
- move ra, zero
-
- END(relocate_code)
*(.data*)
}
- . = .;
- _gp = ALIGN(16) + 0x7ff0;
-
- .got : {
- *(.got)
- }
-
- num_got_entries = SIZEOF(.got) >> PTR_COUNT_SHIFT;
-
. = ALIGN(4);
.sdata : {
*(.sdata*)
__image_copy_end = .;
__init_end = .;
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel.dyn)
- __rel_dyn_end = .;
- }
-
- .padding : {
- /*
- * Workaround for a binutils feature (or bug?).
- *
- * The GNU ld from binutils puts the dynamic relocation
- * entries into the .rel.dyn section. Sometimes it
- * allocates more dynamic relocation entries than it needs
- * and the unused slots are set to R_MIPS_NONE entries.
- *
- * However the size of the .rel.dyn section in the ELF
- * section header does not cover the unused entries, so
- * objcopy removes those during stripping.
- *
- * Create a small section here to avoid that.
- */
- LONG(0xFFFFFFFF)
+ /*
+ * .rel must come last so that the mips-relocs tool can shrink
+ * the section size & the PT_LOAD program header filesz.
+ */
+ .rel : {
+ __rel_start = .;
+ BYTE(0x0)
+ . += (32 * 1024) - 1;
}
_end = .;
- .bss __rel_dyn_start (OVERLAY) : {
+ .bss __rel_start (OVERLAY) : {
__bss_start = .;
*(.sbss.*)
*(.bss.*)
--- /dev/null
+/*
+ * MIPS Relocations
+ *
+ * Copyright (c) 2017 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_MIPS_RELOCS_H__
+#define __ASM_MIPS_RELOCS_H__
+
+#define R_MIPS_NONE 0
+#define R_MIPS_32 2
+#define R_MIPS_26 4
+#define R_MIPS_HI16 5
+#define R_MIPS_LO16 6
+#define R_MIPS_PC16 10
+#define R_MIPS_64 18
+#define R_MIPS_HIGHER 28
+#define R_MIPS_HIGHEST 29
+#define R_MIPS_PC21_S2 60
+#define R_MIPS_PC26_S2 61
+
+#endif /* __ASM_MIPS_RELOCS_H__ */
#include <asm-generic/sections.h>
+/**
+ * __rel_start: Relocation data generated by the mips-relocs tool
+ *
+ * See arch/mips/lib/reloc.c for details on the format & use of this data.
+ */
+extern uint8_t __rel_start[];
+
#endif
obj-y += cache.o
obj-y += cache_init.o
obj-y += genex.o
+obj-y += reloc.o
obj-y += stack.o
obj-y += traps.o
--- /dev/null
+/*
+ * MIPS Relocation
+ *
+ * Copyright (c) 2017 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Relocation data, found in the .rel section, is generated by the mips-relocs
+ * tool & contains a record of all locations in the U-Boot binary that need to
+ * be fixed up during relocation.
+ *
+ * The data is a sequence of unsigned integers, which are of somewhat arbitrary
+ * size. This is achieved by encoding integers as a sequence of bytes, each of
+ * which contains 7 bits of data with the most significant bit indicating
+ * whether any further bytes need to be read. The least significant bits of the
+ * integer are found in the first byte - ie. it somewhat resembles little
+ * endian.
+ *
+ * Each pair of two integers represents a relocation that must be applied. The
+ * first integer represents the type of relocation as a standard ELF relocation
+ * type (ie. R_MIPS_*). The second integer represents the offset at which to
+ * apply the relocation, relative to the previous relocation or for the first
+ * relocation the start of the relocated .text section.
+ *
+ * The end of the relocation data is indicated when type R_MIPS_NONE (0) is
+ * read, at which point no further integers should be read. That is, the
+ * terminating R_MIPS_NONE reloc includes no offset.
+ */
+
+#include <common.h>
+#include <asm/relocs.h>
+#include <asm/sections.h>
+
+/**
+ * read_uint() - Read an unsigned integer from the buffer
+ * @buf: pointer to a pointer to the reloc buffer
+ *
+ * Read one whole unsigned integer from the relocation data pointed to by @buf,
+ * advancing @buf past the bytes encoding the integer.
+ *
+ * Returns: the integer read from @buf
+ */
+static unsigned long read_uint(uint8_t **buf)
+{
+ unsigned long val = 0;
+ unsigned int shift = 0;
+ uint8_t new;
+
+ do {
+ new = *(*buf)++;
+ val |= (new & 0x7f) << shift;
+ shift += 7;
+ } while (new & 0x80);
+
+ return val;
+}
+
+/**
+ * apply_reloc() - Apply a single relocation
+ * @type: the type of reloc (R_MIPS_*)
+ * @addr: the address that the reloc should be applied to
+ * @off: the relocation offset, ie. number of bytes we're moving U-Boot by
+ *
+ * Apply a single relocation of type @type at @addr. This function is
+ * intentionally simple, and does the bare minimum needed to fixup the
+ * relocated U-Boot - in particular, it does not check for overflows.
+ */
+static void apply_reloc(unsigned int type, void *addr, long off)
+{
+ uint32_t u32;
+
+ switch (type) {
+ case R_MIPS_26:
+ u32 = *(uint32_t *)addr;
+ u32 = (u32 & GENMASK(31, 26)) |
+ ((u32 + (off >> 2)) & GENMASK(25, 0));
+ *(uint32_t *)addr = u32;
+ break;
+
+ case R_MIPS_32:
+ *(uint32_t *)addr += off;
+ break;
+
+ case R_MIPS_64:
+ *(uint64_t *)addr += off;
+ break;
+
+ case R_MIPS_HI16:
+ *(uint32_t *)addr += off >> 16;
+ break;
+
+ default:
+ panic("Unhandled reloc type %u\n", type);
+ }
+}
+
+/**
+ * relocate_code() - Relocate U-Boot, generally from flash to DDR
+ * @start_addr_sp: new stack pointer
+ * @new_gd: pointer to relocated global data
+ * @relocaddr: the address to relocate to
+ *
+ * Relocate U-Boot from its current location (generally in flash) to a new one
+ * (generally in DDR). This function will copy the U-Boot binary & apply
+ * relocations as necessary, then jump to board_init_r in the new build of
+ * U-Boot. As such, this function does not return.
+ */
+void relocate_code(ulong start_addr_sp, gd_t *new_gd, ulong relocaddr)
+{
+ unsigned long addr, length, bss_len;
+ uint8_t *buf, *bss_start;
+ unsigned int type;
+ long off;
+
+ /*
+ * Ensure that we're relocating by an offset which is a multiple of
+ * 64KiB, ie. doesn't change the least significant 16 bits of any
+ * addresses. This allows us to discard R_MIPS_LO16 relocs, saving
+ * space in the U-Boot binary & complexity in handling them.
+ */
+ off = relocaddr - (unsigned long)__text_start;
+ if (off & 0xffff)
+ panic("Mis-aligned relocation\n");
+
+ /* Copy U-Boot to RAM */
+ length = __image_copy_end - __text_start;
+ memcpy((void *)relocaddr, __text_start, length);
+
+ /* Now apply relocations to the copy in RAM */
+ buf = __rel_start;
+ addr = relocaddr;
+ while (true) {
+ type = read_uint(&buf);
+ if (type == R_MIPS_NONE)
+ break;
+
+ addr += read_uint(&buf) << 2;
+ apply_reloc(type, (void *)addr, off);
+ }
+
+ /* Ensure the icache is coherent */
+ flush_cache(relocaddr, length);
+
+ /* Clear the .bss section */
+ bss_start = (uint8_t *)((unsigned long)__bss_start + off);
+ bss_len = (unsigned long)&__bss_end - (unsigned long)__bss_start;
+ memset(bss_start, 0, bss_len);
+
+ /* Jump to the relocated U-Boot */
+ asm volatile(
+ "move $29, %0\n"
+ " move $4, %1\n"
+ " move $5, %2\n"
+ " move $31, $0\n"
+ " jr %3"
+ : /* no outputs */
+ : "r"(start_addr_sp),
+ "r"(new_gd),
+ "r"(relocaddr),
+ "r"((unsigned long)board_init_r + off));
+
+ /* Since we jumped to the new U-Boot above, we won't get here */
+ unreachable();
+}
*/
gd->relocaddr -= gd->mon_len;
gd->relocaddr &= ~(4096 - 1);
-#ifdef CONFIG_E500
+#if defined(CONFIG_E500) || defined(CONFIG_MIPS)
/* round down to next 64 kB limit so that IVPR stays aligned */
gd->relocaddr &= ~(65536 - 1);
#endif
/img2srec
/kwboot
/dumpimage
+/mips-relocs
/mkenvimage
/mkimage
/mkexynosspl
hostprogs-y += fdtgrep
fdtgrep-objs += $(LIBFDT_OBJS) fdtgrep.o
+hostprogs-$(CONFIG_MIPS) += mips-relocs
+
# We build some files with extra pedantic flags to try to minimize things
# that won't build on some weird host compiler -- though there are lots of
# exceptions for files that aren't complaint.
--- /dev/null
+/*
+ * MIPS Relocation Data Generator
+ *
+ * Copyright (c) 2017 Imagination Technologies Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include <asm/relocs.h>
+
+#define hdr_field(pfx, idx, field) ({ \
+ uint64_t _val; \
+ unsigned int _size; \
+ \
+ if (is_64) { \
+ _val = pfx##hdr64[idx].field; \
+ _size = sizeof(pfx##hdr64[0].field); \
+ } else { \
+ _val = pfx##hdr32[idx].field; \
+ _size = sizeof(pfx##hdr32[0].field); \
+ } \
+ \
+ switch (_size) { \
+ case 1: \
+ break; \
+ case 2: \
+ _val = is_be ? be16toh(_val) : le16toh(_val); \
+ break; \
+ case 4: \
+ _val = is_be ? be32toh(_val) : le32toh(_val); \
+ break; \
+ case 8: \
+ _val = is_be ? be64toh(_val) : le64toh(_val); \
+ break; \
+ } \
+ \
+ _val; \
+})
+
+#define set_hdr_field(pfx, idx, field, val) ({ \
+ uint64_t _val; \
+ unsigned int _size; \
+ \
+ if (is_64) \
+ _size = sizeof(pfx##hdr64[0].field); \
+ else \
+ _size = sizeof(pfx##hdr32[0].field); \
+ \
+ switch (_size) { \
+ case 1: \
+ _val = val; \
+ break; \
+ case 2: \
+ _val = is_be ? htobe16(val) : htole16(val); \
+ break; \
+ case 4: \
+ _val = is_be ? htobe32(val) : htole32(val); \
+ break; \
+ case 8: \
+ _val = is_be ? htobe64(val) : htole64(val); \
+ break; \
+ } \
+ \
+ if (is_64) \
+ pfx##hdr64[idx].field = _val; \
+ else \
+ pfx##hdr32[idx].field = _val; \
+})
+
+#define ehdr_field(field) \
+ hdr_field(e, 0, field)
+#define phdr_field(idx, field) \
+ hdr_field(p, idx, field)
+#define shdr_field(idx, field) \
+ hdr_field(s, idx, field)
+
+#define set_phdr_field(idx, field, val) \
+ set_hdr_field(p, idx, field, val)
+#define set_shdr_field(idx, field, val) \
+ set_hdr_field(s, idx, field, val)
+
+#define shstr(idx) (&shstrtab[idx])
+
+bool is_64, is_be;
+uint64_t text_base;
+
+struct mips_reloc {
+ uint8_t type;
+ uint64_t offset;
+} *relocs;
+size_t relocs_sz, relocs_idx;
+
+static int add_reloc(unsigned int type, uint64_t off)
+{
+ struct mips_reloc *new;
+ size_t new_sz;
+
+ switch (type) {
+ case R_MIPS_NONE:
+ case R_MIPS_LO16:
+ case R_MIPS_PC16:
+ case R_MIPS_HIGHER:
+ case R_MIPS_HIGHEST:
+ case R_MIPS_PC21_S2:
+ case R_MIPS_PC26_S2:
+ /* Skip these relocs */
+ return 0;
+
+ default:
+ break;
+ }
+
+ if (relocs_idx == relocs_sz) {
+ new_sz = relocs_sz ? relocs_sz * 2 : 128;
+ new = realloc(relocs, new_sz * sizeof(*relocs));
+ if (!new) {
+ fprintf(stderr, "Out of memory\n");
+ return -ENOMEM;
+ }
+
+ relocs = new;
+ relocs_sz = new_sz;
+ }
+
+ relocs[relocs_idx++] = (struct mips_reloc){
+ .type = type,
+ .offset = off,
+ };
+
+ return 0;
+}
+
+static int parse_mips32_rel(const void *_rel)
+{
+ const Elf32_Rel *rel = _rel;
+ uint32_t off, type;
+
+ off = is_be ? be32toh(rel->r_offset) : le32toh(rel->r_offset);
+ off -= text_base;
+
+ type = is_be ? be32toh(rel->r_info) : le32toh(rel->r_info);
+ type = ELF32_R_TYPE(type);
+
+ return add_reloc(type, off);
+}
+
+static int parse_mips64_rela(const void *_rel)
+{
+ const Elf64_Rela *rel = _rel;
+ uint64_t off, type;
+
+ off = is_be ? be64toh(rel->r_offset) : le64toh(rel->r_offset);
+ off -= text_base;
+
+ type = rel->r_info >> (64 - 8);
+
+ return add_reloc(type, off);
+}
+
+static void output_uint(uint8_t **buf, uint64_t val)
+{
+ uint64_t tmp;
+
+ do {
+ tmp = val & 0x7f;
+ val >>= 7;
+ tmp |= !!val << 7;
+ *(*buf)++ = tmp;
+ } while (val);
+}
+
+static int compare_relocs(const void *a, const void *b)
+{
+ const struct mips_reloc *ra = a, *rb = b;
+
+ return ra->offset - rb->offset;
+}
+
+int main(int argc, char *argv[])
+{
+ unsigned int i, j, i_rel_shdr, sh_type, sh_entsize, sh_entries;
+ size_t rel_size, rel_actual_size, load_sz;
+ const char *shstrtab, *sh_name, *rel_pfx;
+ int (*parse_fn)(const void *rel);
+ uint8_t *buf_start, *buf;
+ const Elf32_Ehdr *ehdr32;
+ const Elf64_Ehdr *ehdr64;
+ uintptr_t sh_offset;
+ Elf32_Phdr *phdr32;
+ Elf64_Phdr *phdr64;
+ Elf32_Shdr *shdr32;
+ Elf64_Shdr *shdr64;
+ struct stat st;
+ int err, fd;
+ void *elf;
+ bool skip;
+
+ fd = open(argv[1], O_RDWR);
+ if (fd == -1) {
+ fprintf(stderr, "Unable to open input file %s\n", argv[1]);
+ err = errno;
+ goto out_ret;
+ }
+
+ err = fstat(fd, &st);
+ if (err) {
+ fprintf(stderr, "Unable to fstat() input file\n");
+ goto out_close_fd;
+ }
+
+ elf = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+ if (elf == MAP_FAILED) {
+ fprintf(stderr, "Unable to mmap() input file\n");
+ err = errno;
+ goto out_close_fd;
+ }
+
+ ehdr32 = elf;
+ ehdr64 = elf;
+
+ if (memcmp(&ehdr32->e_ident[EI_MAG0], ELFMAG, SELFMAG)) {
+ fprintf(stderr, "Input file is not an ELF\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ if (ehdr32->e_ident[EI_VERSION] != EV_CURRENT) {
+ fprintf(stderr, "Unrecognised ELF version\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ switch (ehdr32->e_ident[EI_CLASS]) {
+ case ELFCLASS32:
+ is_64 = false;
+ break;
+ case ELFCLASS64:
+ is_64 = true;
+ break;
+ default:
+ fprintf(stderr, "Unrecognised ELF class\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ switch (ehdr32->e_ident[EI_DATA]) {
+ case ELFDATA2LSB:
+ is_be = false;
+ break;
+ case ELFDATA2MSB:
+ is_be = true;
+ break;
+ default:
+ fprintf(stderr, "Unrecognised ELF data encoding\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ if (ehdr_field(e_type) != ET_EXEC) {
+ fprintf(stderr, "Input ELF is not an executable\n");
+ printf("type 0x%lx\n", ehdr_field(e_type));
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ if (ehdr_field(e_machine) != EM_MIPS) {
+ fprintf(stderr, "Input ELF does not target MIPS\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ phdr32 = elf + ehdr_field(e_phoff);
+ phdr64 = elf + ehdr_field(e_phoff);
+ shdr32 = elf + ehdr_field(e_shoff);
+ shdr64 = elf + ehdr_field(e_shoff);
+ shstrtab = elf + shdr_field(ehdr_field(e_shstrndx), sh_offset);
+
+ i_rel_shdr = UINT_MAX;
+ for (i = 0; i < ehdr_field(e_shnum); i++) {
+ sh_name = shstr(shdr_field(i, sh_name));
+
+ if (!strcmp(sh_name, ".rel")) {
+ i_rel_shdr = i;
+ continue;
+ }
+
+ if (!strcmp(sh_name, ".text")) {
+ text_base = shdr_field(i, sh_addr);
+ continue;
+ }
+ }
+ if (i_rel_shdr == UINT_MAX) {
+ fprintf(stderr, "Unable to find .rel section\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+ if (!text_base) {
+ fprintf(stderr, "Unable to find .text base address\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+
+ rel_pfx = is_64 ? ".rela." : ".rel.";
+
+ for (i = 0; i < ehdr_field(e_shnum); i++) {
+ sh_type = shdr_field(i, sh_type);
+ if ((sh_type != SHT_REL) && (sh_type != SHT_RELA))
+ continue;
+
+ sh_name = shstr(shdr_field(i, sh_name));
+ if (strncmp(sh_name, rel_pfx, strlen(rel_pfx))) {
+ if (strcmp(sh_name, ".rel") && strcmp(sh_name, ".rel.dyn"))
+ fprintf(stderr, "WARNING: Unexpected reloc section name '%s'\n", sh_name);
+ continue;
+ }
+
+ /*
+ * Skip reloc sections which either don't correspond to another
+ * section in the ELF, or whose corresponding section isn't
+ * loaded as part of the U-Boot binary (ie. doesn't have the
+ * alloc flags set).
+ */
+ skip = true;
+ for (j = 0; j < ehdr_field(e_shnum); j++) {
+ if (strcmp(&sh_name[strlen(rel_pfx) - 1], shstr(shdr_field(j, sh_name))))
+ continue;
+
+ skip = !(shdr_field(j, sh_flags) & SHF_ALLOC);
+ break;
+ }
+ if (skip)
+ continue;
+
+ sh_offset = shdr_field(i, sh_offset);
+ sh_entsize = shdr_field(i, sh_entsize);
+ sh_entries = shdr_field(i, sh_size) / sh_entsize;
+
+ if (sh_type == SHT_REL) {
+ if (is_64) {
+ fprintf(stderr, "REL-style reloc in MIPS64 ELF?\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ } else {
+ parse_fn = parse_mips32_rel;
+ }
+ } else {
+ if (is_64) {
+ parse_fn = parse_mips64_rela;
+ } else {
+ fprintf(stderr, "RELA-style reloc in MIPS32 ELF?\n");
+ err = -EINVAL;
+ goto out_free_relocs;
+ }
+ }
+
+ for (j = 0; j < sh_entries; j++) {
+ err = parse_fn(elf + sh_offset + (j * sh_entsize));
+ if (err)
+ goto out_free_relocs;
+ }
+ }
+
+ /* Sort relocs in ascending order of offset */
+ qsort(relocs, relocs_idx, sizeof(*relocs), compare_relocs);
+
+ /* Make reloc offsets relative to their predecessor */
+ for (i = relocs_idx - 1; i > 0; i--)
+ relocs[i].offset -= relocs[i - 1].offset;
+
+ /* Write the relocations to the .rel section */
+ buf = buf_start = elf + shdr_field(i_rel_shdr, sh_offset);
+ for (i = 0; i < relocs_idx; i++) {
+ output_uint(&buf, relocs[i].type);
+ output_uint(&buf, relocs[i].offset >> 2);
+ }
+
+ /* Write a terminating R_MIPS_NONE (0) */
+ output_uint(&buf, R_MIPS_NONE);
+
+ /* Ensure the relocs didn't overflow the .rel section */
+ rel_size = shdr_field(i_rel_shdr, sh_size);
+ rel_actual_size = buf - buf_start;
+ if (rel_actual_size > rel_size) {
+ fprintf(stderr, "Relocs overflowed .rel section\n");
+ return -ENOMEM;
+ }
+
+ /* Update the .rel section's size */
+ set_shdr_field(i_rel_shdr, sh_size, rel_actual_size);
+
+ /* Shrink the PT_LOAD program header filesz (ie. shrink u-boot.bin) */
+ for (i = 0; i < ehdr_field(e_phnum); i++) {
+ if (phdr_field(i, p_type) != PT_LOAD)
+ continue;
+
+ load_sz = phdr_field(i, p_filesz);
+ load_sz -= rel_size - rel_actual_size;
+ set_phdr_field(i, p_filesz, load_sz);
+ break;
+ }
+
+ /* Make sure data is written back to the file */
+ err = msync(elf, st.st_size, MS_SYNC);
+ if (err) {
+ fprintf(stderr, "Failed to msync: %d\n", errno);
+ goto out_free_relocs;
+ }
+
+out_free_relocs:
+ free(relocs);
+ munmap(elf, st.st_size);
+out_close_fd:
+ close(fd);
+out_ret:
+ return err;
+}
projects / u-boot / commitdiff