]> git.sur5r.net Git - u-boot/commitdiff
sf: Optimize BAR write code
authorJagan Teki <jteki@openedev.com>
Wed, 2 Sep 2015 06:09:48 +0000 (11:39 +0530)
committerJagan Teki <jteki@openedev.com>
Sun, 25 Oct 2015 14:47:03 +0000 (20:17 +0530)
Optimized spi-flash bar writing code and also removed
unnecessary bank_sel in read_ops.

Cc: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
drivers/mtd/spi/sf_ops.c

index b33fe5a1b2b3bc9337d63abb18e7d5f8951e4f16..6e457ecbfc1ae949d5b52f2c2d7bbbe273976c79 100644 (file)
@@ -95,15 +95,14 @@ int spi_flash_cmd_write_config(struct spi_flash *flash, u8 wc)
 #endif
 
 #ifdef CONFIG_SPI_FLASH_BAR
-static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
+static int spi_flash_write_bank(struct spi_flash *flash, u32 offset)
 {
-       u8 cmd;
+       u8 cmd, bank_sel;
        int ret;
 
-       if (flash->bank_curr == bank_sel) {
-               debug("SF: not require to enable bank%d\n", bank_sel);
-               return bank_sel;
-       }
+       bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift);
+       if (bank_sel == flash->bank_curr)
+               goto bar_end;
 
        cmd = flash->bank_write_cmd;
        ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
@@ -111,25 +110,10 @@ static int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
                debug("SF: fail to write bank register\n");
                return ret;
        }
-       flash->bank_curr = bank_sel;
-
-       return 0;
-}
-
-static int spi_flash_bank(struct spi_flash *flash, u32 offset)
-{
-       u8 bank_sel;
-       int ret;
-
-       bank_sel = offset / (SPI_FLASH_16MB_BOUN << flash->shift);
-
-       ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
-       if (ret) {
-               debug("SF: fail to set bank%d\n", bank_sel);
-               return ret;
-       }
 
-       return bank_sel;
+bar_end:
+       flash->bank_curr = bank_sel;
+       return flash->bank_curr;
 }
 #endif
 
@@ -285,7 +269,7 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
                        spi_flash_dual_flash(flash, &erase_addr);
 #endif
 #ifdef CONFIG_SPI_FLASH_BAR
-               ret = spi_flash_bank(flash, erase_addr);
+               ret = spi_flash_write_bank(flash, erase_addr);
                if (ret < 0)
                        return ret;
 #endif
@@ -327,7 +311,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
                        spi_flash_dual_flash(flash, &write_addr);
 #endif
 #ifdef CONFIG_SPI_FLASH_BAR
-               ret = spi_flash_bank(flash, write_addr);
+               ret = spi_flash_write_bank(flash, write_addr);
                if (ret < 0)
                        return ret;
 #endif
@@ -422,9 +406,10 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
                        spi_flash_dual_flash(flash, &read_addr);
 #endif
 #ifdef CONFIG_SPI_FLASH_BAR
-               bank_sel = spi_flash_bank(flash, read_addr);
-               if (bank_sel < 0)
+               ret = spi_flash_write_bank(flash, read_addr);
+               if (ret < 0)
                        return ret;
+               bank_sel = flash->bank_curr;
 #endif
                remain_len = ((SPI_FLASH_16MB_BOUN << flash->shift) *
                                (bank_sel + 1)) - offset;