CONFIG_SF_DEFAULT_MODE (see include/spi.h)
CONFIG_SF_DEFAULT_SPEED in Hz
- CONFIG_CMD_SF_TEST
-
- Define this option to include a destructive SPI flash
- test ('sf test').
-
-- SystemACE Support:
CONFIG_SYSTEMACE
Adding this option adds support for Xilinx SystemACE
imply LZMA
imply SCSI
imply CMD_SATA
+ imply CMD_SF_TEST
config SH
bool "SuperH architecture"
imply CMD_GETTIME
imply CMD_IO
imply CMD_IRQ
+ imply CMD_SF_TEST
config XTENSA
bool "Xtensa architecture"
help
SPI Flash support
+config CMD_SF_TEST
+ bool "sf test - Allow testing of SPI flash"
+ help
+ Provides a way to test that SPI flash is working correctly. The
+ test is destructive, in that an area of SPI flash must be provided
+ for the test to use. Performance information is also provided,
+ measuring the performance of reading, writing and erasing in
+ Mbps (Million Bits Per Second). This value should approximately
+ equal the SPI bus speed for a single-bit-wide SPI bus, assuming
+ everything is working properly.
+
config CMD_SPI
bool "sspi"
help
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SF_TEST=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SF_TEST=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_SPI=y
CONFIG_CMD_I2C=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_SF_TEST=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_PART=y
CONFIG_CMD_SF=y
+# CONFIG_CMD_SF_TEST is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_REMOTEPROC=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_PCI=y
+CONFIG_CMD_READ=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TFTPSRV=y
CONFIG_CMD_RARP=y
CONFIG_UT_TIME=y
CONFIG_UT_DM=y
CONFIG_UT_ENV=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_MTDPARTS_SPREAD=y
-CONFIG_CMD_READ=y
#include <configs/x86-common.h>
-#undef CONFIG_CMD_SF_TEST
-
#undef CONFIG_TPM_TIS_BASE_ADDRESS
#undef CONFIG_SCSI_AHCI
#define CONFIG_ENV_SIZE 8192
/* SPI - enable all SPI flash types for testing purposes */
-#define CONFIG_CMD_SF_TEST
#define CONFIG_I2C_EDID
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPI_FLASH_GIGADEVICE
-#define CONFIG_CMD_SF_TEST
-
#define CONFIG_KEYBOARD
#endif
/*-----------------------------------------------------------------------
* FLASH configuration
*/
-#define CONFIG_CMD_SF_TEST
#define CONFIG_SPI
/*-----------------------------------------------------------------------
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_SF_TEST
CONFIG_CMD_SH_ZIMAGEBOOT
CONFIG_CMD_SPL
CONFIG_CMD_SPL_NAND_OFS