* Patch by Jon Loeliger, Kumar Gala, 2005-02-08

  For MPC85xxCDS:
    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
    for faster flash parts.
    Add documentation for BR/OR for FLASH.

diff --git a/CHANGELOG b/CHANGELOG
index 7dd4fad9a1be51d26b443094169dc212e9d094c6..985f5f04509dd1f73760a9caaae5f99d81720290 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,6 +1,12 @@
 ======================================================================
 Changes for U-Boot 1.1.3:
 ======================================================================
+* Patch by Jon Loeliger, Kumar Gala, 2005-02-08
+  For MPC85xxCDS:
+    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+    for faster flash parts.
+    Add documentation for BR/OR for FLASH.
+
 * Patch by Jon Loeliger 2005-02-08
   Determine L2 Cache size dynamically on 85XX boards.
 

diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index cf15b88390b5af4b1d6489db7efb3fb6bae3ec57..3ec27b8aaeea56747c3828b9727ec739b6696919 100644 (file)
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -95,18 +95,50 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
 #endif
 
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
 /*
- * SDRAM on the Local Bus
+ * Local Bus Definitions
  */
-#define CFG_LBC_SDRAM_BASE     0xf0000000      /* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE     64              /* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ *
+ * OR0, OR1:
+ *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ *    Reserved ORx[17:18] = 11, confusion here?
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ */
+
 #define CFG_FLASH_BASE         0xff000000      /* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM         0xff801001      /* port size 16bit */
-#define CFG_BR1_PRELIM         0xff001001      /* port size 16bit */
+#define CFG_BR0_PRELIM         0xff801001
+#define CFG_BR1_PRELIM         0xff001001
 
-#define        CFG_OR0_PRELIM          0xff806e61      /* 8MB Flash */
-#define        CFG_OR1_PRELIM          0xff806e61      /* 8MB Flash */
+#define        CFG_OR0_PRELIM          0xff806e65
+#define        CFG_OR1_PRELIM          0xff806e65
 
 #define CFG_FLASH_BANKS_LIST   {0xff800000, CFG_FLASH_BASE}
 #define CFG_MAX_FLASH_BANKS    2               /* number of banks */
@@ -121,11 +153,12 @@ extern unsigned long get_clock_freq(void);
 #define CFG_FLASH_CFI
 #define CFG_FLASH_EMPTY_INFO
 
-#undef CONFIG_CLOCKS_IN_MHZ
 
 /*
- * Local Bus Definitions
+ * SDRAM on the Local Bus
  */
+#define CFG_LBC_SDRAM_BASE     0xf0000000      /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE     64              /* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.

diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 78b622fdde5d1a4a3139f0757528f23b1bf8b6b1..7967e9069d8c19b446014ed59a4c927ee0e1e484 100644 (file)
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -95,18 +95,50 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
 #endif
 
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
 /*
- * SDRAM on the Local Bus
+ * Local Bus Definitions
  */
-#define CFG_LBC_SDRAM_BASE     0xf0000000      /* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE     64              /* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ *
+ * OR0, OR1:
+ *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ *    Reserved ORx[17:18] = 11, confusion here?
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ */
+
 #define CFG_FLASH_BASE         0xff000000      /* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM         0xff801001      /* port size 16bit */
-#define CFG_BR1_PRELIM         0xff001001      /* port size 16bit */
+#define CFG_BR0_PRELIM         0xff801001
+#define CFG_BR1_PRELIM         0xff001001
 
-#define        CFG_OR0_PRELIM          0xff806e61      /* 8MB Flash */
-#define        CFG_OR1_PRELIM          0xff806e61      /* 8MB Flash */
+#define        CFG_OR0_PRELIM          0xff806e65
+#define        CFG_OR1_PRELIM          0xff806e65
 
 #define CFG_FLASH_BANKS_LIST   {0xff800000, CFG_FLASH_BASE}
 #define CFG_MAX_FLASH_BANKS    2               /* number of banks */
@@ -121,11 +153,12 @@ extern unsigned long get_clock_freq(void);
 #define CFG_FLASH_CFI
 #define CFG_FLASH_EMPTY_INFO
 
-#undef CONFIG_CLOCKS_IN_MHZ
 
 /*
- * Local Bus Definitions
+ * SDRAM on the Local Bus
  */
+#define CFG_LBC_SDRAM_BASE     0xf0000000      /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE     64              /* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.