--- /dev/null
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <generic-phy.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline struct phy_ops *phy_dev_ops(struct udevice *dev)
+{
+ return (struct phy_ops *)dev->driver->ops;
+}
+
+static int generic_phy_xlate_offs_flags(struct phy *phy,
+ struct fdtdec_phandle_args *args)
+{
+ debug("%s(phy=%p)\n", __func__, phy);
+
+ if (args->args_count > 1) {
+ debug("Invaild args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ if (args->args_count)
+ phy->id = args->args[0];
+ else
+ phy->id = 0;
+
+
+ return 0;
+}
+
+int generic_phy_get_by_index(struct udevice *dev, int index,
+ struct phy *phy)
+{
+ struct fdtdec_phandle_args args;
+ struct phy_ops *ops;
+ int ret;
+ struct udevice *phydev;
+
+ debug("%s(dev=%p, index=%d, phy=%p)\n", __func__, dev, index, phy);
+
+ assert(phy);
+ ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev_of_offset(dev),
+ "phys", "#phy-cells", 0, index,
+ &args);
+ if (ret) {
+ debug("%s: fdtdec_parse_phandle_with_args failed: err=%d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = uclass_get_device_by_of_offset(UCLASS_PHY, args.node, &phydev);
+ if (ret) {
+ debug("%s: uclass_get_device_by_of_offset failed: err=%d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ phy->dev = phydev;
+
+ ops = phy_dev_ops(phydev);
+
+ if (ops->of_xlate)
+ ret = ops->of_xlate(phy, &args);
+ else
+ ret = generic_phy_xlate_offs_flags(phy, &args);
+ if (ret) {
+ debug("of_xlate() failed: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ return ret;
+}
+
+int generic_phy_get_by_name(struct udevice *dev, const char *phy_name,
+ struct phy *phy)
+{
+ int index;
+
+ debug("%s(dev=%p, name=%s, phy=%p)\n", __func__, dev, phy_name, phy);
+
+ index = fdt_stringlist_search(gd->fdt_blob, dev_of_offset(dev),
+ "phy-names", phy_name);
+ if (index < 0) {
+ debug("fdt_stringlist_search() failed: %d\n", index);
+ return index;
+ }
+
+ return generic_phy_get_by_index(dev, index, phy);
+}
+
+int generic_phy_init(struct phy *phy)
+{
+ struct phy_ops const *ops = phy_dev_ops(phy->dev);
+
+ return ops->init ? ops->init(phy) : 0;
+}
+
+int generic_phy_reset(struct phy *phy)
+{
+ struct phy_ops const *ops = phy_dev_ops(phy->dev);
+
+ return ops->reset ? ops->reset(phy) : 0;
+}
+
+int generic_phy_exit(struct phy *phy)
+{
+ struct phy_ops const *ops = phy_dev_ops(phy->dev);
+
+ return ops->exit ? ops->exit(phy) : 0;
+}
+
+int generic_phy_power_on(struct phy *phy)
+{
+ struct phy_ops const *ops = phy_dev_ops(phy->dev);
+
+ return ops->power_on ? ops->power_on(phy) : 0;
+}
+
+int generic_phy_power_off(struct phy *phy)
+{
+ struct phy_ops const *ops = phy_dev_ops(phy->dev);
+
+ return ops->power_off ? ops->power_off(phy) : 0;
+}
+
+UCLASS_DRIVER(phy) = {
+ .id = UCLASS_PHY,
+ .name = "phy",
+};
--- /dev/null
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __GENERIC_PHY_H
+#define __GENERIC_PHY_H
+
+
+/**
+ * struct phy - A handle to (allowing control of) a single phy port.
+ *
+ * Clients provide storage for phy handles. The content of the structure is
+ * managed solely by the PHY API and PHY drivers. A phy struct is
+ * initialized by "get"ing the phy struct. The phy struct is passed to all
+ * other phy APIs to identify which PHY port to operate upon.
+ *
+ * @dev: The device which implements the PHY port.
+ * @id: The PHY ID within the provider.
+ *
+ */
+struct phy {
+ struct udevice *dev;
+ unsigned long id;
+};
+
+/*
+ * struct udevice_ops - set of function pointers for phy operations
+ * @init: operation to be performed for initializing phy (optional)
+ * @exit: operation to be performed while exiting (optional)
+ * @reset: reset the phy (optional).
+ * @power_on: powering on the phy (optional)
+ * @power_off: powering off the phy (optional)
+ */
+struct phy_ops {
+ /**
+ * of_xlate - Translate a client's device-tree (OF) phy specifier.
+ *
+ * The PHY core calls this function as the first step in implementing
+ * a client's generic_phy_get_by_*() call.
+ *
+ * If this function pointer is set to NULL, the PHY core will use a
+ * default implementation, which assumes #phy-cells = <0> or
+ * #phy-cells = <1>, and in the later case that the DT cell
+ * contains a simple integer PHY port ID.
+ *
+ * @phy: The phy struct to hold the translation result.
+ * @args: The phy specifier values from device tree.
+ * @return 0 if OK, or a negative error code.
+ */
+ int (*of_xlate)(struct phy *phy,
+ struct fdtdec_phandle_args *args);
+
+ /**
+ * init - initialize the hardware.
+ *
+ * Hardware intialization should not be done in during probe() but
+ * should be implemented in this init() function. It could be starting
+ * PLL, taking a controller out of reset, routing, etc. This function
+ * is typically called only once per PHY port.
+ * If power_on() is not implemented, it must power up the phy.
+ *
+ * @phy: the PHY port to initialize
+ * @return 0 if OK, or a negative error code.
+ */
+ int (*init)(struct phy *phy);
+
+ /**
+ * exit - de-initialize the PHY device
+ *
+ * Hardware de-intialization should be done here. Every step done in
+ * init() should be undone here.
+ * This could be used to suspend the phy to reduce power consumption or
+ * to put the phy in a known condition before booting the OS (though it
+ * is NOT called automatically before booting the OS)
+ * If power_off() is not implemented, it must power down the phy.
+ *
+ * @phy: PHY port to be de-initialized
+ * @return 0 if OK, or a negative error code
+ */
+ int (*exit)(struct phy *phy);
+
+ /**
+ * reset - resets a PHY device without shutting down
+ *
+ * @phy: PHY port to be reset
+ *
+ * During runtime, the PHY may need to be reset in order to
+ * re-establish connection etc without being shut down or exit.
+ *
+ * @return 0 if OK, or a negative error code
+ */
+ int (*reset)(struct phy *phy);
+
+ /**
+ * power_on - power on a PHY device
+ *
+ * @phy: PHY port to be powered on
+ *
+ * During runtime, the PHY may need to be powered on or off several
+ * times. This function is used to power on the PHY. It relies on the
+ * setup done in init(). If init() is not implemented, it must take care
+ * of setting up the context (PLLs, ...)
+ *
+ * @return 0 if OK, or a negative error code
+ */
+ int (*power_on)(struct phy *phy);
+
+ /**
+ * power_off - power off a PHY device
+ *
+ * @phy: PHY port to be powered off
+ *
+ * During runtime, the PHY may need to be powered on or off several
+ * times. This function is used to power off the PHY. Except if
+ * init()/deinit() are not implemented, it must not de-initialize
+ * everything.
+ *
+ * @return 0 if OK, or a negative error code
+ */
+ int (*power_off)(struct phy *phy);
+};
+
+
+/**
+ * generic_phy_init() - initialize the PHY port
+ *
+ * @phy: the PHY port to initialize
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_init(struct phy *phy);
+
+/**
+ * generic_phy_init() - de-initialize the PHY device
+ *
+ * @phy: PHY port to be de-initialized
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_exit(struct phy *phy);
+
+/**
+ * generic_phy_reset() - resets a PHY device without shutting down
+ *
+ * @phy: PHY port to be reset
+ *@return 0 if OK, or a negative error code
+ */
+int generic_phy_reset(struct phy *phy);
+
+/**
+ * generic_phy_power_on() - power on a PHY device
+ *
+ * @phy: PHY port to be powered on
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_power_on(struct phy *phy);
+
+/**
+ * generic_phy_power_off() - power off a PHY device
+ *
+ * @phy: PHY port to be powered off
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_power_off(struct phy *phy);
+
+
+/**
+ * generic_phy_get_by_index() - Get a PHY device by integer index.
+ *
+ * @user: the client device
+ * @index: The index in the list of available PHYs
+ * @phy: A pointer to the PHY port
+ *
+ * This looks up a PHY device for a client device based on its position in the
+ * list of the possible PHYs.
+ *
+ * example:
+ * usb1: usb_otg_ss@xxx {
+ * compatible = "xxx";
+ * reg = <xxx>;
+ * .
+ * .
+ * phys = <&usb2_phy>, <&usb3_phy>;
+ * .
+ * .
+ * };
+ * the USB2 phy can be accessed by passing index '0' and the USB3 phy can
+ * be accessed by passing index '1'
+ *
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_get_by_index(struct udevice *user, int index,
+ struct phy *phy);
+
+/**
+ * generic_phy_get_by_name() - Get a PHY device by its name.
+ *
+ * @user: the client device
+ * @phy_name: The name of the PHY in the list of possible PHYs
+ * @phy: A pointer to the PHY port
+ *
+ * This looks up a PHY device for a client device in the
+ * list of the possible PHYs based on its name.
+ *
+ * example:
+ * usb1: usb_otg_ss@xxx {
+ * compatible = "xxx";
+ * reg = <xxx>;
+ * .
+ * .
+ * phys = <&usb2_phy>, <&usb3_phy>;
+ * phy-names = "usb2phy", "usb3phy";
+ * .
+ * .
+ * };
+ * the USB3 phy can be accessed using "usb3phy", and USB2 by using "usb2phy"
+ *
+ * @return 0 if OK, or a negative error code
+ */
+int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
+ struct phy *phy);
+
+#endif /*__GENERIC_PHY_H */