help
If you want to build TPL as well as the normal image and SPL, say Y.
+config FIT
+ bool "Support Flattened Image Tree"
+ depends on !SPL_BUILD
+ help
+ This option allows to boot the new uImage structrure,
+ Flattened Image Tree. FIT is formally a FDT, which can include
+ images of various types (kernel, FDT blob, ramdisk, etc.)
+ in a single blob. To boot this new uImage structure,
+ pass the the address of the blob to the "bootm" command.
+
+config FIT_VERBOSE
+ bool "Display verbose messages on FIT boot"
+ depends on FIT
+
+config FIT_SIGNATURE
+ bool "Enabel signature verification of FIT uImages"
+ depends on FIT
+ help
+ This option enables signature verification of FIT uImages,
+ using a hash signed and verified using RSA.
+ See doc/uImage.FIT/signature.txt for more details.
+
config SYS_EXTRA_OPTIONS
string "Extra Options (DEPRECATED)"
depends on !SPL_BUILD
libs-y += lib/
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
libs-y += $(CPUDIR)/
-ifdef SOC
-libs-y += $(CPUDIR)/$(SOC)/
-endif
libs-$(CONFIG_OF_EMBED) += dts/
libs-y += arch/$(ARCH)/lib/
libs-y += fs/
CONFIG_CMD_EXT4 * ext4 command support
CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls)
that work for multiple fs types
+ CONFIG_CMD_FS_UUID * Look up a filesystem UUID
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
CONFIG_CMD_FAT * FAT command support
Enable auto completion of commands using TAB.
- CONFIG_SYS_HUSH_PARSER
-
- Define this variable to enable the "hush" shell (from
- Busybox) as command line interpreter, thus enabling
- powerful command line syntax like
- if...then...else...fi conditionals or `&&' and '||'
- constructs ("shell scripts").
-
- If undefined, you get the old, much simpler behaviour
- with a somewhat smaller memory footprint.
-
-
CONFIG_SYS_PROMPT_HUSH_PS2
This defines the secondary prompt string, which is
bool "Support bcm28155_ap"
select CPU_V7
-config TARGET_BCM958300K
- bool "Support bcm958300k"
+config TARGET_BCMCYGNUS
+ bool "Support bcmcygnus"
select CPU_V7
-config TARGET_BCM958622HR
- bool "Support bcm958622hr"
+config TARGET_BCMNSP
+ bool "Support bcmnsp"
select CPU_V7
config ARCH_EXYNOS
source "board/bluewater/snapper9260/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
-source "board/broadcom/bcm958300k/Kconfig"
-source "board/broadcom/bcm958622hr/Kconfig"
+source "board/broadcom/bcmcygnus/Kconfig"
+source "board/broadcom/bcmnsp/Kconfig"
source "board/calao/sbc35_a9g20/Kconfig"
source "board/calao/tny_a9260/Kconfig"
source "board/calao/usb_a9263/Kconfig"
extra-y = start.o
obj-y = cpu.o
+
+obj-$(CONFIG_MX31) += mx31/
+obj-$(CONFIG_MX35) += mx35/
extra-y = start.o
obj-y = cpu.o
+
+obj-$(CONFIG_BCM2835) += bcm2835/
+obj-$(CONFIG_TNETV107X) += tnetv107x/
#define BIT(x) (1 << (x))
#define MAX_PREDIV 64
-#define MAX_POSTDIV 8
+#define MAX_POSTDIV 8UL
#define MAX_MULT 512
#define MAX_DIV (MAX_PREDIV * MAX_POSTDIV)
pllctl_reg_write(data->pll, ctl, tmp);
mult = data->pll_freq / fpll;
- for (mult = max(mult, 1); mult <= MAX_MULT; mult++) {
+ for (mult = max(mult, 1UL); mult <= MAX_MULT; mult++) {
div = (fpll * mult) / data->pll_freq;
if (div < 1 || div > MAX_DIV)
continue;
obj-y = interrupts.o cpu.o
obj-$(CONFIG_TEGRA) += tegra-common/
+obj-$(CONFIG_TEGRA20) += tegra20/
+obj-$(CONFIG_TEGRA30) += tegra30/
+obj-$(CONFIG_TEGRA114) += tegra114/
+obj-$(CONFIG_TEGRA124) += tegra124/
obj-y += cpu.o
obj-$(CONFIG_USE_IRQ) += interrupts.o
+
+obj-$(if $(filter a320,$(SOC)),y) += a320/
+obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(CONFIG_EP93XX) += ep93xx/
+obj-$(CONFIG_IMX) += imx/
+obj-$(CONFIG_KS8695) += ks8695/
+obj-$(CONFIG_S3C24X0) += s3c24x0/
extra-y :=
endif
endif
+
+obj-$(CONFIG_ARMADA100) += armada100/
+obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(CONFIG_ARCH_DAVINCI) += davinci/
+obj-$(CONFIG_KIRKWOOD) += kirkwood/
+obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
+obj-$(CONFIG_MB86R0x) += mb86r0x/
+obj-$(CONFIG_MX25) += mx25/
+obj-$(CONFIG_MX27) += mx27/
+obj-$(if $(filter mxs,$(SOC)),y) += mxs/
+obj-$(CONFIG_ARCH_NOMADIK) += nomadik/
+obj-$(CONFIG_ORION5X) += orion5x/
+obj-$(CONFIG_PANTHEON) += pantheon/
+obj-$(if $(filter spear,$(SOC)),y) += spear/
+obj-$(CONFIG_ARCH_VERSATILE) += versatile/
uint32_t powered_by_linreg = 0;
int adjust_up, tmp;
- new_brownout = DIV_ROUND(new_target - new_brownout, cfg->step_mV);
+ new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout,
+ cfg->step_mV);
cur_target = readl(cfg->reg);
cur_target &= cfg->trg_mask;
ifneq (,$(filter s5pc1xx exynos,$(SOC)))
obj-y += s5p-common/
endif
+
+obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/
+obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/
+obj-$(CONFIG_AT91FAMILY) += at91/
+obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
+obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
+obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
+obj-$(CONFIG_ARCH_EXYNOS) += exynos/
+obj-$(CONFIG_ARCH_HIGHBANK) += highbank/
+obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
+obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
+obj-$(if $(filter mx5,$(SOC)),y) += mx5/
+obj-$(CONFIG_MX6) += mx6/
+obj-$(CONFIG_OMAP34XX) += omap3/
+obj-$(CONFIG_OMAP44XX) += omap4/
+obj-$(CONFIG_OMAP54XX) += omap5/
+obj-$(CONFIG_RMOBILE) += rmobile/
+obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
+obj-$(CONFIG_SOCFPGA) += socfpga/
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
+obj-$(CONFIG_TEGRA20) += tegra20/
+obj-$(CONFIG_U8500) += u8500/
+obj-$(CONFIG_ARCH_UNIPHIER) += uniphier/
+obj-$(CONFIG_VF610) += vf610/
+obj-$(CONFIG_ZYNQ) += zynq/
struct refclk *refclk_str_to_clk(const char *name);
-#define U8_MAX ((u8)~0U)
-#define U32_MAX ((u32)~0U)
-#define U64_MAX ((u64)~0U)
-
/* The common clock framework uses u8 to represent a parent index */
#define PARENT_COUNT_MAX ((u32)U8_MAX)
return 1;
for (i = 1; i <= loops; i++) {
- const unsigned int effective_div = max(min(input_rate / i /
- target_rate, cap), 1);
+ const unsigned int effective_div =
+ max(min(input_rate / i / target_rate, cap), 1U);
const unsigned int effective_rate = input_rate / i /
effective_div;
const int error = target_rate - effective_rate;
}
for (upto = 0, i = 0; upto < uboot_size; upto += todo, i++) {
- todo = min(uboot_size - upto, (1 << 15));
+ todo = min(uboot_size - upto, (unsigned int)(1 << 15));
spi_rx_tx(regs, todo, (void *)(uboot_addr),
(void *)(SPI_FLASH_UBOOT_POS), i);
}
*/
/* calculate SR2_WTCNT_VALUE */
- sys_rate = DIV_ROUND(V_OSCK, 1000000);
- clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
- sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+ sys_rate = DIV_ROUND_CLOSEST(V_OSCK, 1000000);
+ clk_cycles = DIV_ROUND_CLOSEST(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+ sr2_cnt = DIV_ROUND_CLOSEST(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
setbits_le32(setup,
sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
+++ /dev/null
-#
-# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# necessary to create built-in.o
-obj- := __dummy__.o
+++ /dev/null
-#
-# (C) Copyright 2013-2014
-# NVIDIA Corporation <www.nvidia.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# necessary to create built-in.o
-obj- := __dummy__.o
writel(0, &dc->win.h_initial_dda);
writel(0, &dc->win.v_initial_dda);
- h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1);
- v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1);
+ h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1U);
+ v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1U);
val = h_dda << H_DDA_INC_SHIFT;
val |= v_dda << V_DDA_INC_SHIFT;
+++ /dev/null
-#
-# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-
-# necessary to create built-in.o
-obj- := __dummy__.o
obj-y += cache.o
obj-y += tlb.o
obj-y += transition.o
+
+obj-$(CONFIG_FSL_LSCH3) += fsl-lsch3/
#define _ARMD1_CONFIG_H
#include <asm/arch/armada100.h>
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
/* default Dcache Line length for armada100 */
#define CONFIG_SYS_CACHELINE_SIZE 32
#define __AT91RM9200_H__
#define CONFIG_AT91FAMILY /* it's a member of AT91 family */
-#define CONFIG_ARM920T /* it's an ARM920T Core */
#define CONFIG_ARCH_CPU_INIT /* we need arch_cpu_init() for hw timers */
#define CONFIG_AT91_GPIO /* and require always gpio features */
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
#ifndef __AT91SAM9X5_H__
#define __AT91SAM9X5_H__
-#define CONFIG_ARM926EJS /* ARM926EJS Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 family */
/*
/*
* defines to be used in other places
*/
-#define CONFIG_ARMV7 /* ARM A5 Core */
#define CONFIG_AT91FAMILY /* it's a member of AT91 */
/*
#endif /* CONFIG_KW88F6281 */
#include <asm/arch/soc.h>
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
#define CONFIG_SYS_CACHELINE_SIZE 32
/* default Dcache Line length for kirkwood */
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
#define _LPC32XX_CONFIG_H
/* Basic CPU architecture */
-#define CONFIG_ARM926EJS
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_NR_DRAM_BANKS_MAX 2
#include <asm/arch/pantheon.h>
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
/* default Dcache Line length for pantheon */
#define CONFIG_SYS_CACHELINE_SIZE 32
__weak void flush_cache(unsigned long start, unsigned long size)
{
-#if defined(CONFIG_ARM1136)
+#if defined(CONFIG_CPU_ARM1136)
#if !defined(CONFIG_SYS_ICACHE_OFF)
asm("mcr p15, 0, r1, c7, c5, 0"); /* invalidate I cache */
asm("mcr p15, 0, r1, c7, c14, 0"); /* Clean+invalidate D cache */
#endif
-#endif /* CONFIG_ARM1136 */
+#endif /* CONFIG_CPU_ARM1136 */
-#ifdef CONFIG_ARM926EJS
+#ifdef CONFIG_CPU_ARM926EJS
/* test and clean, page 2-23 of arm926ejs manual */
asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory");
/* disable write buffer as well (page 2-22) */
asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
-#endif /* CONFIG_ARM926EJS */
+#endif /* CONFIG_CPU_ARM926EJS */
return;
}
obj-y += interrupts.o
obj-$(CONFIG_PORTMUX_PIO) += portmux-pio.o
obj-$(CONFIG_PORTMUX_GPIO) += portmux-gpio.o
+
+obj-$(if $(filter at32ap700x,$(SOC)),y) += at32ap700x/
sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
rate = parent_rate;
} else {
- divider = min(255, divider / 2 - 1);
+ divider = min(255UL, divider / 2 - 1);
sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
| SM_BF(DIV, divider));
rate = parent_rate / (2 * (divider + 1));
inbound_len = emudat;
} else {
/* store the bytes */
- leftovers_len = min(4, inbound_len);
+ leftovers_len = min((size_t)4, inbound_len);
inbound_len -= leftovers_len;
leftovers = emudat;
}
*dshift = WDSIZE_P;
#endif
- *bpos = min(limit, ffs(ldst | lsrc | count)) - 1;
+ *bpos = min(limit, (unsigned long)ffs(ldst | lsrc | count)) - 1;
}
/* This version misbehaves for count values of 0 and 2^16+.
#ifdef PSIZE
/* The max memory DMA peripheral transfer size is 4 bytes. */
- dsize |= min(2, bpos) << PSIZE_P;
+ dsize |= min(2UL, bpos) << PSIZE_P;
#endif
/* Copy sram functions from sdram to sram */
extra-y = start.o
obj-y = cache.o
obj-y += cpu.o interrupts.o time.o
+
+obj-$(CONFIG_SOC_AU1X00) += au1x00/
#define readl(a) au_readl((long)(a))
#define writel(v,a) au_writel((v),(int)(a))
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#define DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
# SPDX-License-Identifier: GPL-2.0+
#
-# necessary to create built-in.o
-obj- := __dummy__.o
-
extra-y = start.o
+
+obj-$(if $(filter ag101,$(SOC)),y) += ag101/
+obj-$(if $(filter ag102,$(SOC)),y) += ag102/
#define readl(a) (*((volatile u32 *)(a)))
#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
u64 memsize = (u64)memsize_in_meg << 20;
- memsize = min(memsize, CONFIG_MAX_MEM_MAPPED);
+ memsize = min(memsize, (u64)CONFIG_MAX_MEM_MAPPED);
memsize = tlb_map_range(ram_tlb_address, p_addr, memsize, TLB_MAP_RAM);
if (memsize)
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE)
- t_wr_ns = max(t_wr_ns,
+ t_wr_ns = max(t_wr_ns, (unsigned long)
spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
}
else
sdram_ddr1 = false;
- t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
- t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
- t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
- t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
- t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
- t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
+ t_rcd_ns = max(t_rcd_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
+ t_rrd_ns = max(t_rrd_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
+ t_rp_ns = max(t_rp_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
+ t_ras_ns = max(t_ras_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 30));
+ t_rc_ns = max(t_rc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 41));
+ t_rfc_ns = max(t_rfc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 42));
}
}
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE) {
- t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
- t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
+ t_wpc_ns = max(t_wtr_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ t_wtr_ns = max(t_wtr_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
+ t_rpc_ns = max(t_rpc_ns,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
}
}
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
/* If a dimm is installed in a particular slot ... */
if (dimm_populated[dimm_num] != SDRAM_NONE)
- ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
+ ecc = max(ecc,
+ (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11));
}
if (ecc == 0)
return;
#define readl(a) (*((volatile u32 *)(a)))
#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
#endif
size = min(bootm_size, get_effective_memsize());
- size = min(size, CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
+ size = min(size, (ulong)CONFIG_SYS_LINUX_LOWMEM_MAX_SIZE);
if (size < bootm_size) {
ulong base = bootmap_base + size;
return os_dirent_typename[OS_FILET_UNKNOWN];
}
-ssize_t os_get_filesize(const char *fname)
+int os_get_filesize(const char *fname, loff_t *size)
{
struct stat buf;
int ret;
ret = stat(fname, &buf);
if (ret)
return ret;
- return buf.st_size;
+ *size = buf.st_size;
+ return 0;
}
void os_putc(int ch)
{
struct sandbox_state *state = state_get_current();
int fd, ret;
- int size;
+ loff_t size;
- size = os_get_filesize(fname);
- if (size < 0)
- return -ENOENT;
+ ret = os_get_filesize(fname, &size);
+ if (ret < 0)
+ return ret;
if (size != state->ram_size)
return -ENOSPC;
fd = open(fname, O_RDONLY);
max_arg_len = 0;
for (i = 0; i < num_options; ++i)
- max_arg_len = max(strlen(sb_opt[i]->flag), max_arg_len);
+ max_arg_len = max((int)strlen(sb_opt[i]->flag), max_arg_len);
max_noarg_len = max_arg_len + 7;
for (i = 0; i < num_options; ++i) {
static int state_read_file(struct sandbox_state *state, const char *fname)
{
- int size;
+ loff_t size;
int ret;
int fd;
- size = os_get_filesize(fname);
- if (size < 0) {
+ ret = os_get_filesize(fname, &size);
+ if (ret < 0) {
printf("Cannot find sandbox state file '%s'\n", fname);
- return -ENOENT;
+ return ret;
}
state->state_fdt = os_malloc(size);
if (!state->state_fdt) {
extra-y = start.o
obj-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o
obj-y += interrupts.o cpu.o call64.o
+
+obj-$(CONFIG_SYS_COREBOOT) += coreboot/
obj-$(CONFIG_PCI) += pci.o
{
u8 secondary;
hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
- hose->last_busno = max(hose->last_busno, secondary);
+ hose->last_busno = max(hose->last_busno, (int)secondary);
pci_hose_scan_bus(hose, secondary);
}
{
int i;
- unsigned num_entries = min(lib_sysinfo.n_memranges, max_entries);
+ unsigned num_entries = min((unsigned)lib_sysinfo.n_memranges, max_entries);
if (num_entries < lib_sysinfo.n_memranges) {
printf("Warning: Limiting e820 map to %d entries.\n",
num_entries);
--- /dev/null
+BCM11130 BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcm28155_ap/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm11130_defconfig
--- /dev/null
+BCM11130_NAND BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcm28155_ap/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm11130_nand_defconfig
--- /dev/null
+BCM911360_ENTPHN-NS BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm911360_entphn-ns_defconfig
--- /dev/null
+BCM911360_ENTPHN BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm911360_entphn_defconfig
--- /dev/null
+BCM911360K BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm911360k_defconfig
--- /dev/null
+BCM958300K-NS BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm958300k-ns_defconfig
+++ /dev/null
-if TARGET_BCM958300K
-
-config SYS_BOARD
- default "bcm_ep"
-
-config SYS_VENDOR
- default "broadcom"
-
-config SYS_SOC
- default "bcmcygnus"
-
-config SYS_CONFIG_NAME
- default "bcm_ep_board"
-
-endif
-Broadcom: Cygnus
+BCM958300K BOARD
M: Steve Rae <srae@broadcom.com>
S: Maintained
-F: board/broadcom/bcm958300k/
+F: board/broadcom/bcmcygnus/
F: include/configs/bcm_ep_board.h
F: configs/bcm958300k_defconfig
--- /dev/null
+BCM958305K BOARD
+M: Steve Rae <srae@broadcom.com>
+S: Maintained
+F: board/broadcom/bcmcygnus/
+F: include/configs/bcm_ep_board.h
+F: configs/bcm958305k_defconfig
+++ /dev/null
-if TARGET_BCM958622HR
-
-config SYS_BOARD
- default "bcm_ep"
-
-config SYS_VENDOR
- default "broadcom"
-
-config SYS_SOC
- default "bcmnsp"
-
-config SYS_CONFIG_NAME
- default "bcm_ep_board"
-
-endif
-Broadcom: Northstar Plus
+BCM958622HR BOARD
M: Steve Rae <srae@broadcom.com>
S: Maintained
-F: board/broadcom/bcm958622hr/
+F: board/broadcom/bcmnsp/
F: include/configs/bcm_ep_board.h
F: configs/bcm958622hr_defconfig
return status;
}
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+}
+
+void smp_kick_all_cpus(void)
+{
+}
+
+void smp_waitloop(unsigned previous_address)
+{
+}
+#endif
--- /dev/null
+if TARGET_BCMCYGNUS
+
+config SYS_BOARD
+ default "bcm_ep"
+
+config SYS_VENDOR
+ default "broadcom"
+
+config SYS_SOC
+ default "bcmcygnus"
+
+config SYS_CONFIG_NAME
+ default "bcm_ep_board"
+
+endif
--- /dev/null
+if TARGET_BCMNSP
+
+config SYS_BOARD
+ default "bcm_ep"
+
+config SYS_VENDOR
+ default "broadcom"
+
+config SYS_SOC
+ default "bcmnsp"
+
+config SYS_CONFIG_NAME
+ default "bcm_ep_board"
+
+endif
{
*(.vectors)
arch/arm/cpu/arm926ejs/start.o (.text*)
- arch/arm/cpu/arm926ejs/davinci/built-in.o (.text*)
+ arch/arm/cpu/arm926ejs/built-in.o (.text*)
drivers/mtd/nand/built-in.o (.text*)
*(.text*)
#include <image.h>
#include <asm/byteorder.h>
#include <fat.h>
+#include <flash.h>
#include <part.h>
#include "auto_update.h"
#define MAX_LOADSZ 0x1c00000
/* externals */
-extern int fat_register_device(block_dev_desc_t *, int);
-extern int file_fat_detectfs(void);
-extern long file_fat_read(const char *, void *, unsigned long);
long do_fat_read (const char *filename, void *buffer,
unsigned long maxsize, int dols);
-extern int flash_sect_erase(ulong, ulong);
-extern int flash_sect_protect (int, ulong, ulong);
-extern int flash_write (char *, ulong, ulong);
extern block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
e.date[3] & 0x80 ? "PM" : "");
/* Show MAC addresses */
- for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) {
+ for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) {
u8 *p = e.mac[i];
*/
for (i = 0, p = &e; i < sizeof(e); i += 8, p += 8) {
ret = i2c_write(CONFIG_SYS_I2C_EEPROM_ADDR, i, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- p, min((sizeof(e) - i), 8));
+ p, min((int)(sizeof(e) - i), 8));
if (ret)
break;
udelay(5000); /* 5ms write cycle timing */
memset(e.mac[8], 0xff, 6);
#endif
- for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) {
+ for (i = 0; i < min(e.mac_count, (u8)MAX_NUM_PORTS); i++) {
if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
char ethaddr[18];
tmp_buf);
if (!n)
goto failure;
- result = min(size, blk_len - ofs);
+ result = min(size, (int)(blk_len - ofs));
memcpy(dst, tmp_buf + ofs, result);
dst += result;
size -= result;
src_buf = buf;
for (ptr = (uint8_t *)src_buf, i = 20; i > 0;
i -= data_size, ptr += data_size)
- memcpy(ptr, data, min(i, data_size));
+ memcpy(ptr, data,
+ min_t(size_t, i, data_size));
}
}
bin_func(dst_reg->digest, src_buf, 20);
struct key_program header;
uint32_t crc;
uint8_t buf[12];
- int i;
+ loff_t i;
if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
goto failure;
- i = fs_read(path, (ulong)buf, 0, 12);
+ if (fs_read(path, (ulong)buf, 0, 12, &i) < 0)
+ goto failure;
if (i < 12)
goto failure;
header.magic = get_unaligned_be32(buf);
goto failure;
if (fs_set_blk_dev(ifname, dev_part_str, fs_type))
goto failure;
- i = fs_read(path, (ulong)result, 0,
- sizeof(struct key_program) + header.code_size);
+ if (fs_read(path, (ulong)result, 0,
+ sizeof(struct key_program) + header.code_size, &i) < 0)
+ goto failure;
if (i <= 0)
goto failure;
*result = header;
const char *image_path = "/ccdm.itb";
char *mac_path = NULL;
ulong image_addr;
- size_t image_size;
+ loff_t image_size;
uint32_t err;
printf("CCDM S2\n");
image_addr = (ulong)get_image_location();
if (fs_set_blk_dev("mmc", mmcdev, FS_TYPE_EXT))
goto failure;
- image_size = fs_read(image_path, image_addr, 0, 0);
+ if (fs_read(image_path, image_addr, 0, 0, &image_size) < 0)
+ goto failure;
if (image_size <= 0)
goto failure;
- printf("CCDM image found on %s, %d bytes\n", mmcdev, image_size);
+ printf("CCDM image found on %s, %lld bytes\n", mmcdev, image_size);
hmac_blob = load_key_chunk("mmc", mmcdev, FS_TYPE_EXT, mac_path);
if (!hmac_blob) {
void *reg = (void *)CKSEG1ADDR(MALTA_ASCIIPOS0);
/* print up to 8 characters of the string */
- for (i = 0; i < min(strlen(str), 8); i++) {
+ for (i = 0; i < min((int)strlen(str), 8); i++) {
__raw_writel(str[i], reg);
reg += MALTA_ASCIIPOS1 - MALTA_ASCIIPOS0;
}
menu "Command line interface"
depends on !SPL_BUILD
+config HUSH_PARSER
+ bool "Use hush shell"
+ select SYS_HUSH_PARSER
+ help
+ This option enables the "hush" shell (from Busybox) as command line
+ interpreter, thus enabling powerful command line syntax like
+ if...then...else...fi conditionals or `&&' and '||'
+ constructs ("shell scripts").
+
+ If disabled, you get the old, much simpler behaviour with a somewhat
+ smaller memory footprint.
+
+config SYS_HUSH_PARSER
+ bool
+ help
+ Backward compatibility.
+
+comment "Commands"
+
+menu "Info commands"
+
+config CMD_BDI
+ bool "bdinfo"
+ help
+ Print board info
+
+config CMD_CONSOLE
+ bool "coninfo"
+ help
+ Print console devices and information.
+
+config CMD_LICENSE
+ bool "license"
+ help
+ Print GPL license text
+
+endmenu
+
+menu "Boot commands"
+
+config CMD_BOOTD
+ bool "bootd"
+ help
+ Run the command stored in the environment "bootcmd", i.e.
+ "bootd" does the same thing as "run bootcmd".
+
config CMD_BOOTM
- bool "Enable bootm command"
+ bool "bootm"
default y
help
Boot an application image from the memory.
-config CMD_CRC32
- bool "Enable crc32 command"
+config CMD_GO
+ bool "go"
default y
help
- Compute CRC32.
+ Start an application at a given address.
+
+config CMD_RUN
+ bool "run"
+ help
+ Run the command in the given environment variable.
+
+config CMD_IMI
+ bool "iminfo"
+ help
+ Print header information for application image.
+
+config CMD_IMLS
+ bool "imls"
+ help
+ List all images found in flash
+
+config CMD_XIMG
+ bool "imxtract"
+ help
+ Extract a part of a multi-image.
+
+endmenu
+
+menu "Environment commands"
config CMD_EXPORTENV
- bool "Enable env export command"
+ bool "env export"
default y
help
Export environments.
config CMD_IMPORTENV
- bool "Enable env import command"
+ bool "env import"
default y
help
Import environments.
-config CMD_GO
- bool "Enable go command"
+config CMD_EDITENV
+ bool "editenv"
+ help
+ Edit environment variable.
+
+config CMD_SAVEENV
+ bool "saveenv"
+ help
+ Run the command in the given environment variable.
+
+endmenu
+
+menu "Memory commands"
+
+config CMD_MEMORY
+ bool "md, mm, nm, mw, cp, cmp, base, loop"
+ help
+ Memeory commands.
+ md - memory display
+ mm - memory modify (auto-incrementing address)
+ nm - memory modify (constant address)
+ mw - memory write (fill)
+ cp - memory copy
+ cmp - memory compare
+ base - print or set address offset
+ loop - initinite loop on address range
+
+config CMD_CRC32
+ bool "crc32"
default y
help
- Start an application at a given address.
+ Compute CRC32.
+
+config LOOPW
+ bool "loopw"
+ help
+ Infinite write loop on address range
+
+config CMD_MEMTEST
+ bool "crc32"
+ help
+ Simple RAM read/write test.
+
+config CMD_MX_CYCLIC
+ bool "mdc, mwc"
+ help
+ mdc - memory display cyclic
+ mwc - memory write cyclic
+
+config CMD_MEMINFO
+ bool "meminfo"
+ help
+ Display memory information.
+
+endmenu
+
+menu "Device access commands"
+
+config CMD_LOADB
+ bool "loadb"
+ help
+ Load a binary file over serial line.
+
+config CMD_LOADS
+ bool "loads"
+ help
+ Load an S-Record file over serial line
+
+config CMD_FLASH
+ bool "flinfo, erase, protect"
+ help
+ NOR flash support.
+ flinfo - print FLASH memory information
+ erase - FLASH memory
+ protect - enable or disable FLASH write protection
+
+config CMD_NAND
+ bool "nand"
+ help
+ NAND support.
+
+config CMD_SPI
+ bool "sspi"
+ help
+ SPI utility command.
+
+config CMD_I2C
+ bool "i2c"
+ help
+ I2C support.
+
+config CMD_USB
+ bool "usb"
+ help
+ USB support.
+
+config CMD_FPGA
+ bool "fpga"
+ help
+ FPGA support.
+
+endmenu
+
+
+menu "Shell scripting commands"
+
+config CMD_ECHO
+ bool "echo"
+ help
+ Echo args to console
+
+config CMD_ITEST
+ bool "itest"
+ help
+ Return true/false on integer compare.
+
+config CMD_SOURCE
+ bool "source"
+ help
+ Run script from memory
+
+endmenu
+
+menu "Network commands"
+
+config CMD_NET
+ bool "bootp, tftpboot"
+ help
+ Network commands.
+ bootp - boot image via network using BOOTP/TFTP protocol
+ tftpboot - boot image via network using TFTP protocol
+
+config CMD_TFTPPUT
+ bool "tftp put"
+ help
+ TFTP put command, for uploading files to a server
+
+config CMD_TFTPSRV
+ bool "tftpsrv"
+ help
+ Act as a TFTP server and boot the first received file
+
+config CMD_RARP
+ bool "rarpboot"
+ help
+ Boot image via network using RARP/TFTP protocol
+
+config CMD_DHCP
+ bool "dhcp"
+ help
+ Boot image via network using DHCP/TFTP protocol
+
+config CMD_NFS
+ bool "nfs"
+ help
+ Boot image via network using NFS protocol.
+
+config CMD_PING
+ bool "ping"
+ help
+ Send ICMP ECHO_REQUEST to network host
+
+config CMD_CDP
+ bool "cdp"
+ help
+ Perform CDP network configuration
+
+config CMD_SNTP
+ bool "sntp"
+ help
+ Synchronize RTC via network
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_DNS
+ bool "dns"
+ help
+ Lookup the IP of a hostname
+
+config CMD_LINK_LOCAL
+ bool "linklocal"
+ help
+ Acquire a network IP address using the link-local protocol
+
+endmenu
+
+menu "Misc commands"
+
+config CMD_TIME
+ bool "time"
+ help
+ Run commands and summarize execution time.
+
+# TODO: rename to CMD_SLEEP
+config CMD_MISC
+ bool "sleep"
+ help
+ Delay execution for some time
+
+config CMD_TIMER
+ bool "timer"
+ help
+ Access the system timer.
+
+config CMD_SETGETDCR
+ bool "getdcr, setdcr, getidcr, setidcr"
+ depends on 4xx
+ help
+ getdcr - Get an AMCC PPC 4xx DCR's value
+ setdcr - Set an AMCC PPC 4xx DCR's value
+ getidcr - Get a register value via indirect DCR addressing
+ setidcr - Set a register value via indirect DCR addressing
+
+endmenu
endmenu
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o
+obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o
obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o
obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o
static int display_text_info(void)
{
#ifndef CONFIG_SANDBOX
- ulong bss_start, bss_end;
+ ulong bss_start, bss_end, text_base;
bss_start = (ulong)&__bss_start;
bss_end = (ulong)&__bss_end;
- debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n",
#ifdef CONFIG_SYS_TEXT_BASE
- CONFIG_SYS_TEXT_BASE, bss_start, bss_end);
+ text_base = CONFIG_SYS_TEXT_BASE;
#else
- CONFIG_SYS_MONITOR_BASE, bss_start, bss_end);
+ text_base = CONFIG_SYS_MONITOR_BASE;
#endif
+
+ debug("U-Boot code: %08lX -> %08lX BSS: -> %08lX\n",
+ text_base, bss_start, bss_end);
#endif
#ifdef CONFIG_MODEM_SUPPORT
struct sandbox_state *state = state_get_current();
const char *fname = state->fdt_fname;
void *blob;
- ssize_t size;
+ loff_t size;
int err;
int fd;
return -EINVAL;
}
- size = os_get_filesize(fname);
- if (size < 0) {
+ err = os_get_filesize(fname, &size);
+ if (err < 0) {
printf("Failed to file FDT file '%s'\n", fname);
- return -ENOENT;
+ return err;
}
fd = os_open(fname, OS_O_RDONLY);
if (fd < 0) {
gd->irq_sp = gd->start_addr_sp;
# endif
#else
-# ifdef CONFIG_PPC
+# if defined(CONFIG_PPC) || defined(CONFIG_MIPS)
ulong *s;
# endif
s = (ulong *) gd->start_addr_sp;
*s = 0; /* Terminate back chain */
*++s = 0; /* NULL return address */
+# elif defined(CONFIG_MIPS)
+ /* Clear initial stack frame */
+ s = (ulong *) gd->start_addr_sp;
+ *s-- = 0;
+ *s-- = 0;
+ gd->start_addr_sp = (ulong) s;
# endif /* Architecture specific code */
return 0;
*/
bootline = getenv("bootargs");
if (bootline) {
- memcpy((void *) bootaddr, bootline,
- max(strlen(bootline), 255));
- flush_cache(bootaddr, max(strlen(bootline), 255));
+ memcpy((void *)bootaddr, bootline,
+ max(strlen(bootline), (size_t)255));
+ flush_cache(bootaddr, max(strlen(bootline), (size_t)255));
} else {
sprintf(build_buf, CONFIG_SYS_VXWORKS_BOOT_DEVICE);
tmp = getenv("bootfile");
CONFIG_SYS_VXWORKS_ADD_PARAMS);
#endif
- memcpy((void *) bootaddr, build_buf,
- max(strlen(build_buf), 255));
- flush_cache(bootaddr, max(strlen(build_buf), 255));
+ memcpy((void *)bootaddr, build_buf,
+ max(strlen(build_buf), (size_t)255));
+ flush_cache(bootaddr, max(strlen(build_buf), (size_t)255));
}
/*
#if defined(CONFIG_CMD_EXT4_WRITE)
int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc,
- char *const argv[])
+ char *const argv[])
{
- const char *filename = "/";
- int dev, part;
- unsigned long ram_address;
- unsigned long file_size;
- disk_partition_t info;
- block_dev_desc_t *dev_desc;
-
- if (argc < 6)
- return cmd_usage(cmdtp);
-
- part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
- if (part < 0)
- return 1;
-
- dev = dev_desc->dev;
-
- /* get the filename */
- filename = argv[4];
-
- /* get the address in hexadecimal format (string to int) */
- ram_address = simple_strtoul(argv[3], NULL, 16);
-
- /* get the filesize in hexadecimal format */
- file_size = simple_strtoul(argv[5], NULL, 16);
-
- /* set the device as block device */
- ext4fs_set_blk_dev(dev_desc, &info);
-
- /* mount the filesystem */
- if (!ext4fs_mount(info.size)) {
- printf("Bad ext4 partition %s %d:%d\n", argv[1], dev, part);
- goto fail;
- }
-
- /* start write */
- if (ext4fs_write(filename, (unsigned char *)ram_address, file_size)) {
- printf("** Error ext4fs_write() **\n");
- goto fail;
- }
- ext4fs_close();
-
- return 0;
-
-fail:
- ext4fs_close();
-
- return 1;
+ return do_save(cmdtp, flag, argc, argv, FS_TYPE_EXT);
}
-U_BOOT_CMD(ext4write, 6, 1, do_ext4_write,
- "create a file in the root directory",
- "<interface> <dev[:part]> <addr> <absolute filename path> [sizebytes]\n"
- " - create a file in / directory");
+U_BOOT_CMD(ext4write, 7, 1, do_ext4_write,
+ "create a file in the root directory",
+ "<interface> <dev[:part]> <addr> <absolute filename path>\n"
+ " [sizebytes] [file offset]\n"
+ " - create a file in / directory");
#endif
"<interface> <dev[:part]> [directory]\n"
" - list files from 'dev' on 'interface' in a 'directory'");
-U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
+U_BOOT_CMD(ext4load, 7, 0, do_ext4_load,
"load binary file from a Ext4 filesystem",
"<interface> [<dev[:part]> [addr [filename [bytes [pos]]]]]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
static int do_fat_fswrite(cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
- long size;
+ loff_t size;
+ int ret;
unsigned long addr;
unsigned long count;
block_dev_desc_t *dev_desc = NULL;
count = simple_strtoul(argv[5], NULL, 16);
buf = map_sysmem(addr, count);
- size = file_fat_write(argv[4], buf, count);
+ ret = file_fat_write(argv[4], buf, 0, count, &size);
unmap_sysmem(buf);
- if (size == -1) {
+ if (ret < 0) {
printf("\n** Unable to write \"%s\" from %s %d:%d **\n",
argv[4], argv[1], dev, part);
return 1;
}
- printf("%ld bytes written\n", size);
+ printf("%llu bytes written\n", size);
return 0;
}
" If 'pos' is 0 or omitted, the file is read from the start."
)
+static int do_save_wrapper(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ return do_save(cmdtp, flag, argc, argv, FS_TYPE_ANY);
+}
+
+U_BOOT_CMD(
+ save, 7, 0, do_save_wrapper,
+ "save file to a filesystem",
+ "<interface> <dev[:part]> <addr> <filename> bytes [pos]\n"
+ " - Save binary file 'filename' to partition 'part' on device\n"
+ " type 'interface' instance 'dev' from addr 'addr' in memory.\n"
+ " 'bytes' gives the size to save in bytes and is mandatory.\n"
+ " 'pos' gives the file byte position to start writing to.\n"
+ " If 'pos' is 0 or omitted, the file is written from the start."
+)
+
static int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
--- /dev/null
+/*
+ * cmd_fs_uuid.c -- fsuuid command
+ *
+ * Copyright (C) 2014, Bachmann electronic GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <fs.h>
+
+static int do_fs_uuid_wrapper(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ return do_fs_uuid(cmdtp, flag, argc, argv, FS_TYPE_ANY);
+}
+
+U_BOOT_CMD(
+ fsuuid, 4, 1, do_fs_uuid_wrapper,
+ "Look up a filesystem UUID",
+ "<interface> <dev>:<part>\n"
+ " - print filesystem UUID\n"
+ "fsuuid <interface> <dev>:<part> <varname>\n"
+ " - set environment variable to filesystem UUID\n"
+);
#include <common.h>
#include <command.h>
#include <u-boot/md5.h>
+#include <asm/io.h>
/*
* Store the resulting sum to an address or variable
int verify = 0;
int ac;
char * const *av;
+ void *buf;
if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(*av++, NULL, 16);
len = simple_strtoul(*av++, NULL, 16);
- md5_wd((unsigned char *) addr, len, output, CHUNKSZ_MD5);
+ buf = map_sysmem(addr, len);
+ md5_wd(buf, len, output, CHUNKSZ_MD5);
+ unmap_sysmem(buf);
if (!verify) {
printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1);
unsigned long addr, len;
unsigned int i;
u8 output[16];
+ void *buf;
if (argc < 3)
return CMD_RET_USAGE;
addr = simple_strtoul(argv[1], NULL, 16);
len = simple_strtoul(argv[2], NULL, 16);
- md5_wd((unsigned char *) addr, len, output, CHUNKSZ_MD5);
+ buf = map_sysmem(addr, len);
+ md5_wd(buf, len, output, CHUNKSZ_MD5);
+ unmap_sysmem(buf);
+
printf("md5 for %08lx ... %08lx ==> ", addr, addr + len - 1);
for (i = 0; i < 16; i++)
printf("%02x", output[i]);
*/
void pciinfo(int BusNum, int ShortPCIListing)
{
+ struct pci_controller *hose = pci_bus_to_hose(BusNum);
int Device;
int Function;
unsigned char HeaderType;
unsigned short VendorID;
pci_dev_t dev;
+ if (!hose)
+ return;
+
printf("Scanning PCI devices on bus %d\n", BusNum);
if (ShortPCIListing) {
dev = PCI_BDF(BusNum, Device, Function);
+ if (pci_skip_dev(hose, dev))
+ continue;
+
pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID);
if ((VendorID == 0xFFFF) || (VendorID == 0x0000))
continue;
static struct spi_flash *flash;
-
/*
* This function computes the length argument for the erase command.
* The length on which the command is to operate can be given in two forms:
{
/* less accurate but avoids overflow */
if (len >= ((unsigned int) -1) / 1024)
- return len / (max(get_timer(start_ms) / 1024, 1));
+ return len / (max(get_timer(start_ms) / 1024, 1UL));
else
- return 1024 * len / max(get_timer(start_ms), 1);
+ return 1024 * len / max(get_timer(start_ms), 1UL);
}
static int do_spi_flash_probe(int argc, char * const argv[])
ulong last_update = get_timer(0);
for (; buf < end && !err_oper; buf += todo, offset += todo) {
- todo = min(end - buf, flash->sector_size);
+ todo = min_t(size_t, end - buf, flash->sector_size);
if (get_timer(last_update) > 100) {
printf(" \rUpdating, %zu%% %lu B/s",
100 - (end - buf) / scale,
for (i = 0; i < len; i++) {
if (vbuf[i] != 0xff) {
printf("Check failed at %d\n", i);
- print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, vbuf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
return -1;
}
}
for (i = 0; i < len; i++) {
if (buf[i] != vbuf[i]) {
printf("Verify failed at %d, good data:\n", i);
- print_buffer(i, buf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, buf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
printf("Bad data:\n");
- print_buffer(i, vbuf + i, 1, min(len - i, 0x40), 0);
+ print_buffer(i, vbuf + i, 1,
+ min_t(uint, len - i, 0x40), 0);
return -1;
}
}
disk_partition_t info;
int dev, part;
int err;
+ loff_t size;
err = env_export(&env_new);
if (err)
return 1;
}
- err = file_fat_write(FAT_ENV_FILE, (void *)&env_new, sizeof(env_t));
+ err = file_fat_write(FAT_ENV_FILE, (void *)&env_new, 0, sizeof(env_t),
+ &size);
if (err == -1) {
printf("\n** Unable to write \"%s\" from %s%d:%d **\n",
FAT_ENV_FILE, FAT_ENV_INTERFACE, dev, part);
u_char *char_ptr;
blocksize = nand_info[0].erasesize;
- len = min(blocksize, CONFIG_ENV_SIZE);
+ len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
while (amount_saved < CONFIG_ENV_SIZE && offset < end) {
if (nand_block_isbad(&nand_info[0], offset)) {
if (!blocksize)
return 1;
- len = min(blocksize, CONFIG_ENV_SIZE);
+ len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
while (amount_loaded < CONFIG_ENV_SIZE && offset < end) {
if (nand_block_isbad(&nand_info[0], offset)) {
*/
int fdt_alloc_phandle(void *blob)
{
- int offset, phandle = 0;
+ int offset;
+ uint32_t phandle = 0;
for (offset = fdt_next_node(blob, -1, NULL); offset >= 0;
offset = fdt_next_node(blob, offset, NULL)) {
else
return;
- *axis = max(0, axis_alignment);
+ *axis = max(0, (int)axis_alignment);
}
#endif
void lcd_position_cursor(unsigned col, unsigned row)
{
- console_col = min(col, CONSOLE_COLS - 1);
- console_row = min(row, CONSOLE_ROWS - 1);
+ console_col = min_t(short, col, CONSOLE_COLS - 1);
+ console_row = min_t(short, row, CONSOLE_ROWS - 1);
}
int lcd_get_pixel_width(void)
break;
#endif
default:
- debug("SPL: Un-supported Boot Device\n");
+#if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
+ printf("SPL: Unsupported Boot Device %d\n", boot_device);
+#endif
hang();
}
{
s32 err;
struct image_header *header;
- int filelen;
+ loff_t filelen, actlen;
disk_partition_t part_info = {};
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
goto end;
}
- filelen = err = ext4fs_open(filename);
+ err = ext4fs_open(filename, &filelen);
if (err < 0) {
puts("spl: ext4fs_open failed\n");
goto end;
}
- err = ext4fs_read((char *)header, sizeof(struct image_header));
+ err = ext4fs_read((char *)header, sizeof(struct image_header), &actlen);
if (err <= 0) {
puts("spl: ext4fs_read failed\n");
goto end;
spl_parse_image_header(header);
- err = ext4fs_read((char *)spl_image.load_addr, filelen);
+ err = ext4fs_read((char *)spl_image.load_addr, filelen, &actlen);
end:
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
int spl_load_image_ext_os(block_dev_desc_t *block_dev, int partition)
{
int err;
- int filelen;
+ __maybe_unused loff_t filelen, actlen;
disk_partition_t part_info = {};
__maybe_unused char *file;
#if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT)
file = getenv("falcon_args_file");
if (file) {
- filelen = err = ext4fs_open(file);
+ err = ext4fs_open(file, &filelen);
if (err < 0) {
puts("spl: ext4fs_open failed\n");
goto defaults;
}
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen);
+ err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen, &actlen);
if (err <= 0) {
printf("spl: error reading image %s, err - %d, falling back to default\n",
file, err);
defaults:
#endif
- filelen = err = ext4fs_open(CONFIG_SPL_FS_LOAD_ARGS_NAME);
+ err = ext4fs_open(CONFIG_SPL_FS_LOAD_ARGS_NAME, &filelen);
if (err < 0)
puts("spl: ext4fs_open failed\n");
- err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen);
+ err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, filelen, &actlen);
if (err <= 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("%s: error reading image %s, err - %d\n",
}
descriptor = (struct usb_hub_descriptor *)buffer;
- length = min(descriptor->bLength, sizeof(struct usb_hub_descriptor));
+ length = min_t(int, descriptor->bLength,
+ sizeof(struct usb_hub_descriptor));
if (usb_get_hub_descriptor(dev, buffer, length) < 0) {
debug("usb_hub_configure: failed to get hub " \
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_MMC_ENV_DEV=0"
+CONFIG_ARM=y
+CONFIG_TARGET_BCM28155_AP=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
+CONFIG_ARM=y
+CONFIG_TARGET_BCM28155_AP=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000,ARMV7_NONSEC"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000,ARMV7_NONSEC"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x20000000"
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
CONFIG_ARM=y
-CONFIG_TARGET_BCM958300K=y
+CONFIG_TARGET_BCMCYGNUS=y
--- /dev/null
+CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x40000000"
+CONFIG_ARM=y
+CONFIG_TARGET_BCMCYGNUS=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_SDRAM_SIZE=0x01000000"
CONFIG_ARM=y
-CONFIG_TARGET_BCM958622HR=y
+CONFIG_TARGET_BCMNSP=y
u16 now_blocks; /* number of blocks per iteration */
u32 transfer_size; /* number of bytes per iteration */
- now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks);
+ now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blocks);
transfer_size = ATA_SECT_SIZE * now_blocks;
if (transfer_size > user_buffer_size) {
u16 word;
if (init_done == 1 && dev < sata_info.maxport)
- return 1;
+ return 0;
init_done = 1;
#ifdef CONFIG_SYS_FSL_DDR4
/* tXP=max(4nCK, 6ns) */
- int txp = max(mclk_ps * 4, 6000); /* unit=ps */
+ int txp = max((int)mclk_ps * 4, 6000); /* unit=ps */
trwt_mclk = 2;
twrt_mclk = 1;
act_pd_exit_mclk = picos_to_mclk(txp);
* MRS_CYC = max(tMRD, tMOD)
* tMRD = 8nCK, tMOD = max(24nCK, 15ns)
*/
- tmrd_mclk = max(24, picos_to_mclk(15000));
+ tmrd_mclk = max(24U, picos_to_mclk(15000));
#elif defined(CONFIG_SYS_FSL_DDR3)
unsigned int data_rate = get_ddr_freq(0);
int txp;
* spec has not the tAXPD, we use
* tAXPD=1, need design to confirm.
*/
- txp = max(mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
+ txp = max((int)mclk_ps * 3, (mclk_ps > 1540 ? 7500 : 6000));
tmrd_mclk = 4;
/* set the turnaround time */
#ifdef CONFIG_SYS_FSL_DDR4
refrec_ctrl = picos_to_mclk(common_dimm->trfc1_ps) - 8;
wrrec_mclk = picos_to_mclk(common_dimm->twr_ps);
- acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4);
- wrtord_mclk = max(2, picos_to_mclk(2500));
+ acttoact_mclk = max(picos_to_mclk(common_dimm->trrds_ps), 4U);
+ wrtord_mclk = max(2U, picos_to_mclk(2500));
if ((wrrec_mclk < 1) || (wrrec_mclk > 24))
printf("Error: WRREC doesn't support %d clocks\n", wrrec_mclk);
else
wr_data_delay = popts->write_data_delay;
#ifdef CONFIG_SYS_FSL_DDR4
cpo = 0;
- cke_pls = max(3, picos_to_mclk(5000));
+ cke_pls = max(3U, picos_to_mclk(5000));
#elif defined(CONFIG_SYS_FSL_DDR3)
/*
* cke pulse = max(3nCK, 7.5ns) for DDR3-800
* max(3nCK, 5.625ns) for DDR3-1066, 1333
* max(3nCK, 5ns) for DDR3-1600, 1866, 2133
*/
- cke_pls = max(3, picos_to_mclk(mclk_ps > 1870 ? 7500 :
+ cke_pls = max(3U, picos_to_mclk(mclk_ps > 1870 ? 7500 :
(mclk_ps > 1245 ? 5625 : 5000)));
#else
cke_pls = FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR;
unsigned int txpr, tcksre, tcksrx;
unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd;
- txpr = max(5, picos_to_mclk(common_dimm->trfc1_ps + 10000));
- tcksre = max(5, picos_to_mclk(10000));
- tcksrx = max(5, picos_to_mclk(10000));
+ txpr = max(5U, picos_to_mclk(common_dimm->trfc1_ps + 10000));
+ tcksre = max(5U, picos_to_mclk(10000));
+ tcksrx = max(5U, picos_to_mclk(10000));
par_lat = 0;
cs_to_cmd = 0;
}
acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps);
- wrtord_bg = max(4, picos_to_mclk(7500));
+ wrtord_bg = max(4U, picos_to_mclk(7500));
if (popts->otf_burst_chop_en)
wrtord_bg += 2;
* Find minimum tckmax_ps to find fastest slow speed,
* i.e., this is the slowest the whole system can go.
*/
- tckmax_ps = min(tckmax_ps, dimm_params[i].tckmax_ps);
+ tckmax_ps = min(tckmax_ps,
+ (unsigned int)dimm_params[i].tckmax_ps);
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
- taamin_ps = max(taamin_ps, dimm_params[i].taa_ps);
+ taamin_ps = max(taamin_ps,
+ (unsigned int)dimm_params[i].taa_ps);
#endif
- tckmin_x_ps = max(tckmin_x_ps, dimm_params[i].tckmin_x_ps);
- trcd_ps = max(trcd_ps, dimm_params[i].trcd_ps);
- trp_ps = max(trp_ps, dimm_params[i].trp_ps);
- tras_ps = max(tras_ps, dimm_params[i].tras_ps);
+ tckmin_x_ps = max(tckmin_x_ps,
+ (unsigned int)dimm_params[i].tckmin_x_ps);
+ trcd_ps = max(trcd_ps, (unsigned int)dimm_params[i].trcd_ps);
+ trp_ps = max(trp_ps, (unsigned int)dimm_params[i].trp_ps);
+ tras_ps = max(tras_ps, (unsigned int)dimm_params[i].tras_ps);
#ifdef CONFIG_SYS_FSL_DDR4
- trfc1_ps = max(trfc1_ps, dimm_params[i].trfc1_ps);
- trfc2_ps = max(trfc2_ps, dimm_params[i].trfc2_ps);
- trfc4_ps = max(trfc4_ps, dimm_params[i].trfc4_ps);
- trrds_ps = max(trrds_ps, dimm_params[i].trrds_ps);
- trrdl_ps = max(trrdl_ps, dimm_params[i].trrdl_ps);
- tccdl_ps = max(tccdl_ps, dimm_params[i].tccdl_ps);
+ trfc1_ps = max(trfc1_ps,
+ (unsigned int)dimm_params[i].trfc1_ps);
+ trfc2_ps = max(trfc2_ps,
+ (unsigned int)dimm_params[i].trfc2_ps);
+ trfc4_ps = max(trfc4_ps,
+ (unsigned int)dimm_params[i].trfc4_ps);
+ trrds_ps = max(trrds_ps,
+ (unsigned int)dimm_params[i].trrds_ps);
+ trrdl_ps = max(trrdl_ps,
+ (unsigned int)dimm_params[i].trrdl_ps);
+ tccdl_ps = max(tccdl_ps,
+ (unsigned int)dimm_params[i].tccdl_ps);
#else
- twr_ps = max(twr_ps, dimm_params[i].twr_ps);
- twtr_ps = max(twtr_ps, dimm_params[i].twtr_ps);
- trfc_ps = max(trfc_ps, dimm_params[i].trfc_ps);
- trrd_ps = max(trrd_ps, dimm_params[i].trrd_ps);
- trtp_ps = max(trtp_ps, dimm_params[i].trtp_ps);
+ twr_ps = max(twr_ps, (unsigned int)dimm_params[i].twr_ps);
+ twtr_ps = max(twtr_ps, (unsigned int)dimm_params[i].twtr_ps);
+ trfc_ps = max(trfc_ps, (unsigned int)dimm_params[i].trfc_ps);
+ trrd_ps = max(trrd_ps, (unsigned int)dimm_params[i].trrd_ps);
+ trtp_ps = max(trtp_ps, (unsigned int)dimm_params[i].trtp_ps);
#endif
- trc_ps = max(trc_ps, dimm_params[i].trc_ps);
+ trc_ps = max(trc_ps, (unsigned int)dimm_params[i].trc_ps);
#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
- tis_ps = max(tis_ps, dimm_params[i].tis_ps);
- tih_ps = max(tih_ps, dimm_params[i].tih_ps);
- tds_ps = max(tds_ps, dimm_params[i].tds_ps);
- tdh_ps = max(tdh_ps, dimm_params[i].tdh_ps);
- tqhs_ps = max(tqhs_ps, dimm_params[i].tqhs_ps);
+ tis_ps = max(tis_ps, (unsigned int)dimm_params[i].tis_ps);
+ tih_ps = max(tih_ps, (unsigned int)dimm_params[i].tih_ps);
+ tds_ps = max(tds_ps, (unsigned int)dimm_params[i].tds_ps);
+ tdh_ps = max(tdh_ps, (unsigned int)dimm_params[i].tdh_ps);
+ tqhs_ps = max(tqhs_ps, (unsigned int)dimm_params[i].tqhs_ps);
/*
* Find maximum tdqsq_max_ps to find slowest.
*
* FIXME: is finding the slowest value the correct
* strategy for this parameter?
*/
- tdqsq_max_ps = max(tdqsq_max_ps, dimm_params[i].tdqsq_max_ps);
+ tdqsq_max_ps = max(tdqsq_max_ps,
+ (unsigned int)dimm_params[i].tdqsq_max_ps);
#endif
refresh_rate_ps = max(refresh_rate_ps,
- dimm_params[i].refresh_rate_ps);
+ (unsigned int)dimm_params[i].refresh_rate_ps);
/* extended_op_srt is either 0 or 1, 0 having priority */
extended_op_srt = min(extended_op_srt,
- dimm_params[i].extended_op_srt);
+ (unsigned int)dimm_params[i].extended_op_srt);
}
outpdimm->ndimms_present = number_of_dimms - temp1;
i2c_write(SPD_SPA1_ADDRESS, 0, 1, &dummy, 1);
ret = i2c_read(i2c_address, 0, 1,
(uchar *)((ulong)spd + 256),
- min(256, sizeof(generic_spd_eeprom_t) - 256));
+ min(256,
+ (int)sizeof(generic_spd_eeprom_t) - 256));
}
#else
ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
readn = 0;
while (size > 0) {
/* get chunk that can be read */
- chunk = min(size, dfu->b_left);
+ chunk = min((long)size, dfu->b_left);
/* consume */
if (chunk > 0) {
memcpy(buf, dfu->i_buf, chunk);
unsigned long ts; /* Timestamp */
u32 isr_status, swap;
u32 partialbit = 0;
- u32 blocksize;
- u32 pos = 0;
+ loff_t blocksize, actread;
+ loff_t pos = 0;
int fstype;
char *interface, *dev_part, *filename;
if (fs_set_blk_dev(interface, dev_part, fstype))
return FPGA_FAIL;
- if (fs_read(filename, (u32) buf, pos, blocksize) < 0)
+ if (fs_read(filename, (u32) buf, pos, blocksize, &actread) < 0)
return FPGA_FAIL;
if (zynq_validate_bitstream(desc, buf, bsize, blocksize, &swap,
return FPGA_FAIL;
if (bsize > blocksize) {
- if (fs_read(filename, (u32) buf, pos, blocksize) < 0)
+ if (fs_read(filename, (u32) buf, pos, blocksize, &actread) < 0)
return FPGA_FAIL;
} else {
- if (fs_read(filename, (u32) buf, pos, bsize) < 0)
+ if (fs_read(filename, (u32) buf, pos, bsize, &actread) < 0)
return FPGA_FAIL;
}
} while (bsize > blocksize);
static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
unsigned int i2c_clk, unsigned int speed)
{
- unsigned short divider = min(i2c_clk / speed, (unsigned short) -1);
+ unsigned short divider = min(i2c_clk / speed, (unsigned int)USHRT_MAX);
/*
* We want to choose an FDR/DFSR that generates an I2C bus speed that
return -1;
}
- len = min(p[1], din_len);
+ len = min((int)p[1], din_len);
cros_ec_dump_data("in", -1, p, len + 3);
/* Response code is first byte of message */
relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
1000000000) + 2 * (relax + 1) - 1;
- strobe_prog = DIV_ROUND(ipg_clk * BV_TIMING_STROBE_PROG_US, 1000000) +
- 2 * (relax + 1) - 1;
+ strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US,
+ 1000000) + 2 * (relax + 1) - 1;
timing = BF(strobe_read, TIMING_STROBE_READ) |
BF(relax, TIMING_RELAX) |
#endif
cfg->cfg.f_min = 400000;
- cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000);
+ cfg->cfg.f_max = min(gd->arch.sdhc_clk, (u32)52000000);
cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
while (len) {
/* The controller has data ready */
if (readl(®s->i_reg) & MMC_I_REG_RXFIFO_RD_REQ) {
- size = min(len, PXAMMC_FIFO_SIZE);
+ size = min(len, (uint32_t)PXAMMC_FIFO_SIZE);
len -= size;
size /= 4;
while (len) {
/* The controller is ready to receive data */
if (readl(®s->i_reg) & MMC_I_REG_TXFIFO_WR_REQ) {
- size = min(len, PXAMMC_FIFO_SIZE);
+ size = min(len, (uint32_t)PXAMMC_FIFO_SIZE);
len -= size;
size /= 4;
while (size--)
writel(*buf++, ®s->txfifo);
- if (min(len, PXAMMC_FIFO_SIZE) < 32)
+ if (min(len, (uint32_t)PXAMMC_FIFO_SIZE) < 32)
writel(MMC_PRTBUF_BUF_PART_FULL, ®s->prtbuf);
}
if (ret < 0)
return ret;
- readlen = min(page_size - column, size);
+ readlen = min(page_size - column, (int)size);
memcpy(dst, page_buffer, readlen);
column = 0;
int ret;
while (size > 0) {
- todo = min(size, sizeof(sandbox_sf_0xff));
+ todo = min(size, (int)sizeof(sandbox_sf_0xff));
ret = os_write(sbsf->fd, sandbox_sf_0xff, todo);
if (ret != todo)
return ret;
return ret;
#endif
byte_addr = offset % page_size;
- chunk_len = min(len - actual, page_size - byte_addr);
+ chunk_len = min(len - actual, (size_t)(page_size - byte_addr));
if (flash->spi->max_write_size)
- chunk_len = min(chunk_len, flash->spi->max_write_size);
+ chunk_len = min(chunk_len,
+ (size_t)flash->spi->max_write_size);
spi_flash_addr(write_addr, cmd);
len = strlen(s);
while (len) {
- int send_len = min(len, sizeof(input_buffer));
+ int send_len = min(len, (int)sizeof(input_buffer));
nc_send_packet(s, send_len);
len -= send_len;
s += send_len;
bdf < PCI_BDF(bus + 1, 0, 0);
#endif
bdf += PCI_BDF(0, 0, 1)) {
+ if (pci_skip_dev(hose, bdf))
+ continue;
+
if (!PCI_FUNC(bdf)) {
pci_read_config_byte(bdf,
PCI_HEADER_TYPE,
#endif
#ifdef CONFIG_PCI_PNP
- sub_bus = max(pciauto_config_device(hose, dev), sub_bus);
+ sub_bus = max((unsigned int)pciauto_config_device(hose, dev),
+ sub_bus);
#else
cfg = pci_find_config(hose, class, vendor, device,
PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
if (cfg) {
cfg->config_device(hose, dev, cfg);
- sub_bus = max(sub_bus, hose->current_busno);
+ sub_bus = max(sub_bus,
+ (unsigned int)hose->current_busno);
}
#endif
n = pci_hose_scan_bus(hose, hose->current_busno);
/* figure out the deepest we've gone for this leg */
- sub_bus = max(n, sub_bus);
+ sub_bus = max((unsigned int)n, sub_bus);
pciauto_postscan_setup_bridge(hose, dev, sub_bus);
sub_bus = hose->current_busno;
space_avail =
current_urb->buffer_length -
current_urb->actual_length;
- popnum = min(space_avail, buf->size);
+ popnum = min(space_avail, (int)buf->size);
if (popnum == 0)
break;
spi_cs_deactivate(slave);
return 0;
}
- buf_len = 2 * cmd_len + min(data_len, max_tran_len);
+ buf_len = 2 * cmd_len + min(data_len, (size_t)max_tran_len);
len = cmd_len + data_len;
rx_offset = cmd_len;
buffer = (unsigned char *)malloc(buf_len);
if (data_in)
din = buffer + rx_offset;
dout = buffer;
- tran_len = min(data_len , max_tran_len);
+ tran_len = min(data_len, (size_t)max_tran_len);
num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4);
num_bytes = (tran_len + cmd_len) % 4;
fsl->data_len = tran_len + cmd_len;
tmp = reg_read(®s->rxdata);
data = cpu_to_be32(tmp);
debug("SPI Rx: 0x%x 0x%x\n", tmp, data);
- cnt = min(nbytes, sizeof(data));
+ cnt = min_t(u32, nbytes, sizeof(data));
if (din) {
memcpy(din, &data, cnt);
din += cnt;
speed = slave->max_hz;
if (spi->max_hz) {
if (speed)
- speed = min(speed, spi->max_hz);
+ speed = min(speed, (int)spi->max_hz);
else
speed = spi->max_hz;
}
* changes to zero exactly after the last byte is fed into the
* FIFO.
*/
- count = min(burst, len - offset - 1);
+ count = min((u32)burst, len - offset - 1);
while (count--)
tpm_write_byte(data[offset++],
&lpc_tpm_dev[locality].data);
if (!gadget_is_dualspeed(gadget))
break;
device_qual(cdev);
- value = min(w_length,
- sizeof(struct usb_qualifier_descriptor));
+ value = min_t(int, w_length,
+ sizeof(struct usb_qualifier_descriptor));
break;
case USB_DT_OTHER_SPEED_CONFIG:
if (!gadget_is_dualspeed(gadget))
UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d",
urb->buffer, urb->buffer_length, urb->actual_length);
- last = min(urb->actual_length - endpoint->sent,
- endpoint->tx_packetSize);
+ last = min_t(u32, urb->actual_length - endpoint->sent,
+ endpoint->tx_packetSize);
if (last) {
u8 *cp = urb->buffer + endpoint->sent;
if (!urb || !urb->actual_length)
return -1;
- n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize);
+ n = min_t(unsigned int, urb->actual_length - endpoint->sent,
+ endpoint->tx_packetSize);
if (n <= 0)
return -1;
u32 ep_num = ep_index(ep);
buf = req->req.buf + req->req.actual;
- length = min(req->req.length - req->req.actual,
- ep_num ? DMA_BUFFER_SIZE : ep->ep.maxpacket);
+ length = min_t(u32, req->req.length - req->req.actual,
+ ep_num ? DMA_BUFFER_SIZE : ep->ep.maxpacket);
ep->len = length;
ep->dma_buf = buf;
case 0:
switch (wValue & 0xff00) {
case 0x0100: /* device descriptor */
- len = min3(txlen, sizeof(root_hub_dev_des), wLength);
+ len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength);
memcpy(buffer, root_hub_dev_des, len);
break;
case 0x0200: /* configuration descriptor */
- len = min3(txlen, sizeof(root_hub_config_des), wLength);
+ len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength);
memcpy(buffer, root_hub_config_des, len);
break;
case 0x0300: /* string descriptors */
switch (wValue & 0xff) {
case 0x00:
- len = min3(txlen, sizeof(root_hub_str_index0),
- wLength);
+ len = min3(txlen, (int)sizeof(root_hub_str_index0),
+ (int)wLength);
memcpy(buffer, root_hub_str_index0, len);
break;
case 0x01:
- len = min3(txlen, sizeof(root_hub_str_index1),
- wLength);
+ len = min3(txlen, (int)sizeof(root_hub_str_index1),
+ (int)wLength);
memcpy(buffer, root_hub_str_index1, len);
break;
}
data[10] = data[9];
}
- len = min3(txlen, data[0], wLength);
+ len = min3(txlen, (int)data[0], (int)wLength);
memcpy(buffer, data, len);
break;
default:
}
mdelay(1);
- len = min3(srclen, le16_to_cpu(req->length), length);
+ len = min3(srclen, (int)le16_to_cpu(req->length), length);
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
else
/* ------------------------------------------------------------------------- */
-#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL))
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
-/* ------------------------------------------------------------------------- */
-
static int isp116x_reset(struct isp116x *isp116x);
/* --- Debugging functions ------------------------------------------------- */
#include <asm/arch/hardware.h> /* needed for AT91_USB_HOST_BASE */
#endif
-#if defined(CONFIG_ARM920T) || \
+#if defined(CONFIG_CPU_ARM920T) || \
defined(CONFIG_S3C24X0) || \
defined(CONFIG_440EP) || \
defined(CONFIG_PCI_OHCI) || \
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
#ifdef CONFIG_PCI_OHCI
static struct pci_device_id ohci_pci_ids[] = {
{0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
#undef DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
return -1; /* fail */
}
-/* based on usb_ohci.c */
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
/*-------------------------------------------------------------------------*
* Virtual Root Hub
*-------------------------------------------------------------------------*/
union xhci_trb *event, int length)
{
udev->act_len = min(length, length -
- EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
+ (int)EVENT_TRB_LEN(le32_to_cpu(event->trans_event.transfer_len)));
switch (GET_COMP_CODE(le32_to_cpu(event->trans_event.transfer_len))) {
case COMP_SUCCESS:
debug("scrlen = %d\n req->length = %d\n",
srclen, le16_to_cpu(req->length));
- len = min(srclen, le16_to_cpu(req->length));
+ len = min(srclen, (int)le16_to_cpu(req->length));
if (srcptr != NULL && len > 0)
memcpy(buffer, srcptr, len);
((readb(&musbr->power) & MUSB_POWER_HSMODE) \
>> MUSB_POWER_HSMODE_SHIFT)
-#define min_t(type, x, y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
/* destination of request */
#define DPRINT(x...) do{}while(0)
#endif
-#ifndef min_t
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-#endif
-
#define MAX_MAPPED_VRAM (2048*2048*4)
#define MIN_MAPPED_VRAM (1024*768*1)
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
if (x == BMP_ALIGN_CENTER)
- x = max(0, (VIDEO_VISIBLE_COLS - width) / 2);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - width) / 2);
else if (x < 0)
- x = max(0, VIDEO_VISIBLE_COLS - width + x + 1);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - width + x + 1));
if (y == BMP_ALIGN_CENTER)
- y = max(0, (VIDEO_VISIBLE_ROWS - height) / 2);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - height) / 2);
else if (y < 0)
- y = max(0, VIDEO_VISIBLE_ROWS - height + y + 1);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - height + y + 1));
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
/*
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
if (x == BMP_ALIGN_CENTER)
- x = max(0, (VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH) / 2);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH) / 2);
else if (x < 0)
- x = max(0, VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH + x + 1);
+ x = max(0, (int)(VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH + x + 1));
if (y == BMP_ALIGN_CENTER)
- y = max(0, (VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT) / 2);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT) / 2);
else if (y < 0)
- y = max(0, VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT + y + 1);
+ y = max(0, (int)(VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT + y + 1));
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
dest = (unsigned char *)screen + (y * width + x) * VIDEO_PIXEL_SIZE;
* we need to adjust the logo height
*/
if (video_logo_ypos == BMP_ALIGN_CENTER)
- video_logo_height += max(0, (VIDEO_VISIBLE_ROWS - \
+ video_logo_height += max(0, (int)(VIDEO_VISIBLE_ROWS -
VIDEO_LOGO_HEIGHT) / 2);
else if (video_logo_ypos > 0)
video_logo_height += video_logo_ypos;
debug(" <" LBAFU ", %d, %d>\n", sector, byte_offset, byte_len);
if (byte_offset != 0) {
+ int readlen;
/* read first part which isn't aligned with start of sector */
if (ext4fs_block_dev_desc->
block_read(ext4fs_block_dev_desc->dev,
printf(" ** ext2fs_devread() read error **\n");
return 0;
}
- memcpy(buf, sec_buf + byte_offset,
- min(ext4fs_block_dev_desc->blksz
- - byte_offset, byte_len));
- buf += min(ext4fs_block_dev_desc->blksz
- - byte_offset, byte_len);
- byte_len -= min(ext4fs_block_dev_desc->blksz
- - byte_offset, byte_len);
+ readlen = min((int)ext4fs_block_dev_desc->blksz - byte_offset,
+ byte_len);
+ memcpy(buf, sec_buf + byte_offset, readlen);
+ buf += readlen;
+ byte_len -= readlen;
sector++;
}
{
unsigned int fpos = 0;
int status;
+ loff_t actread;
struct ext2fs_node *diro = (struct ext2fs_node *) dir;
#ifdef DEBUG
status = ext4fs_read_file(diro, fpos,
sizeof(struct ext2_dirent),
- (char *) &dirent);
- if (status < 1)
+ (char *)&dirent, &actread);
+ if (status < 0)
return 0;
if (dirent.namelen != 0) {
status = ext4fs_read_file(diro,
fpos +
sizeof(struct ext2_dirent),
- dirent.namelen, filename);
- if (status < 1)
+ dirent.namelen, filename,
+ &actread);
+ if (status < 0)
return 0;
fdiro = zalloc(sizeof(struct ext2fs_node));
printf("< ? > ");
break;
}
- printf("%10d %s\n",
- __le32_to_cpu(fdiro->inode.size),
+ printf("%10u %s\n",
+ __le32_to_cpu(fdiro->inode.size),
filename);
}
free(fdiro);
char *symlink;
struct ext2fs_node *diro = node;
int status;
+ loff_t actread;
if (!diro->inode_read) {
status = ext4fs_read_inode(diro->data, diro->ino, &diro->inode);
} else {
status = ext4fs_read_file(diro, 0,
__le32_to_cpu(diro->inode.size),
- symlink);
+ symlink, &actread);
if (status == 0) {
free(symlink);
return 0;
return 1;
}
-int ext4fs_open(const char *filename)
+int ext4fs_open(const char *filename, loff_t *len)
{
struct ext2fs_node *fdiro = NULL;
int status;
- int len;
if (ext4fs_root == NULL)
return -1;
if (status == 0)
goto fail;
}
- len = __le32_to_cpu(fdiro->inode.size);
+ *len = __le32_to_cpu(fdiro->inode.size);
ext4fs_file = fdiro;
- return len;
+ return 0;
fail:
ext4fs_free_node(fdiro, &ext4fs_root->diropen);
int ext4fs_read_inode(struct ext2_data *data, int ino,
struct ext2_inode *inode);
-int ext4fs_read_file(struct ext2fs_node *node, int pos,
- unsigned int len, char *buf);
+int ext4fs_read_file(struct ext2fs_node *node, loff_t pos, loff_t len,
+ char *buf, loff_t *actread);
int ext4fs_find_file(const char *path, struct ext2fs_node *rootnode,
struct ext2fs_node **foundnode, int expecttype);
int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
return -1;
}
+
+int ext4_write_file(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite)
+{
+ int ret;
+
+ if (offset != 0) {
+ printf("** Cannot support non-zero offset **\n");
+ return -1;
+ }
+
+ /* mount the filesystem */
+ if (!ext4fs_mount(0)) {
+ printf("** Error Bad ext4 partition **\n");
+ goto fail;
+ }
+
+ ret = ext4fs_write(filename, buf, len);
+
+ if (ret) {
+ printf("** Error ext4fs_write() **\n");
+ goto fail;
+ }
+ ext4fs_close();
+
+ return 0;
+
+fail:
+ ext4fs_close();
+
+ return -1;
+}
* Optimized read file API : collects and defers contiguous sector
* reads into one potentially more efficient larger sequential read action
*/
-int ext4fs_read_file(struct ext2fs_node *node, int pos,
- unsigned int len, char *buf)
+int ext4fs_read_file(struct ext2fs_node *node, loff_t pos,
+ loff_t len, char *buf, loff_t *actread)
{
struct ext_filesystem *fs = get_fs();
int i;
previous_block_number = -1;
}
- return len;
+ *actread = len;
+ return 0;
}
int ext4fs_ls(const char *dirname)
int ext4fs_exists(const char *filename)
{
- int file_len;
+ loff_t file_len;
+ int ret;
- file_len = ext4fs_open(filename);
- return file_len >= 0;
+ ret = ext4fs_open(filename, &file_len);
+ return ret == 0;
}
-int ext4fs_size(const char *filename)
+int ext4fs_size(const char *filename, loff_t *size)
{
- return ext4fs_open(filename);
+ return ext4fs_open(filename, size);
}
-int ext4fs_read(char *buf, unsigned len)
+int ext4fs_read(char *buf, loff_t len, loff_t *actread)
{
if (ext4fs_root == NULL || ext4fs_file == NULL)
return 0;
- return ext4fs_read_file(ext4fs_file, 0, len, buf);
+ return ext4fs_read_file(ext4fs_file, 0, len, buf, actread);
}
int ext4fs_probe(block_dev_desc_t *fs_dev_desc,
return 0;
}
-int ext4_read_file(const char *filename, void *buf, int offset, int len)
+int ext4_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *len_read)
{
- int file_len;
- int len_read;
+ loff_t file_len;
+ int ret;
if (offset != 0) {
printf("** Cannot support non-zero offset **\n");
return -1;
}
- file_len = ext4fs_open(filename);
- if (file_len < 0) {
+ ret = ext4fs_open(filename, &file_len);
+ if (ret < 0) {
printf("** File not found %s **\n", filename);
return -1;
}
if (len == 0)
len = file_len;
- len_read = ext4fs_read(buf, len);
+ return ext4fs_read(buf, len, len_read);
+}
- return len_read;
+int ext4fs_uuid(char *uuid_str)
+{
+ if (ext4fs_root == NULL)
+ return -1;
+
+#ifdef CONFIG_LIB_UUID
+ uuid_bin_to_str((unsigned char *)ext4fs_root->sblock.unique_id,
+ uuid_str, UUID_STR_FORMAT_STD);
+
+ return 0;
+#else
+ return -ENOSYS;
+#endif
}
/*
* Read at most 'maxsize' bytes from 'pos' in the file associated with 'dentptr'
* into 'buffer'.
- * Return the number of bytes read or -1 on fatal errors.
+ * Update the number of bytes read in *gotsize or return -1 on fatal errors.
*/
__u8 get_contents_vfatname_block[MAX_CLUSTSIZE]
__aligned(ARCH_DMA_MINALIGN);
-static long
-get_contents(fsdata *mydata, dir_entry *dentptr, unsigned long pos,
- __u8 *buffer, unsigned long maxsize)
+static int get_contents(fsdata *mydata, dir_entry *dentptr, loff_t pos,
+ __u8 *buffer, loff_t maxsize, loff_t *gotsize)
{
- unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
+ loff_t filesize = FAT2CPU32(dentptr->size);
unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
__u32 curclust = START(dentptr);
__u32 endclust, newclust;
- unsigned long actsize;
+ loff_t actsize;
- debug("Filesize: %ld bytes\n", filesize);
+ *gotsize = 0;
+ debug("Filesize: %llu bytes\n", filesize);
if (pos >= filesize) {
- debug("Read position past EOF: %lu\n", pos);
- return gotsize;
+ debug("Read position past EOF: %llu\n", pos);
+ return 0;
}
if (maxsize > 0 && filesize > pos + maxsize)
filesize = pos + maxsize;
- debug("%ld bytes\n", filesize);
+ debug("%llu bytes\n", filesize);
actsize = bytesperclust;
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
actsize += bytesperclust;
}
/* align to beginning of next cluster if any */
if (pos) {
- actsize = min(filesize, bytesperclust);
+ actsize = min(filesize, (loff_t)bytesperclust);
if (get_cluster(mydata, curclust, get_contents_vfatname_block,
(int)actsize) != 0) {
printf("Error reading cluster\n");
filesize -= actsize;
actsize -= pos;
memcpy(buffer, get_contents_vfatname_block + pos, actsize);
- gotsize += actsize;
+ *gotsize += actsize;
if (!filesize)
- return gotsize;
+ return 0;
buffer += actsize;
curclust = get_fatent(mydata, curclust);
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
}
if (CHECK_CLUST(newclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", newclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
endclust = newclust;
actsize += bytesperclust;
printf("Error reading cluster\n");
return -1;
}
- gotsize += actsize;
- return gotsize;
+ *gotsize += actsize;
+ return 0;
getit:
if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
printf("Error reading cluster\n");
return -1;
}
- gotsize += (int)actsize;
+ *gotsize += (int)actsize;
filesize -= actsize;
buffer += actsize;
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
printf("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
actsize = bytesperclust;
endclust = curclust;
}
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
l_name,
dirc);
} else {
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
s_name, dirc);
} else {
printf(" %s%c\n",
__u8 do_fat_read_at_block[MAX_CLUSTSIZE]
__aligned(ARCH_DMA_MINALIGN);
-long
-do_fat_read_at(const char *filename, unsigned long pos, void *buffer,
- unsigned long maxsize, int dols, int dogetsize)
+int do_fat_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, int dols, int dogetsize, loff_t *size)
{
char fnamecopy[2048];
boot_sector bs;
__u32 cursect;
int idx, isdir = 0;
int files = 0, dirs = 0;
- long ret = -1;
+ int ret = -1;
int firsttime;
__u32 root_cluster = 0;
int rootdir_size = 0;
}
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
l_name,
dirc);
} else {
}
if (doit) {
if (dirc == ' ') {
- printf(" %8ld %s%c\n",
- (long)FAT2CPU32(dentptr->size),
+ printf(" %8u %s%c\n",
+ FAT2CPU32(dentptr->size),
s_name, dirc);
} else {
printf(" %s%c\n",
if (dols == LS_ROOT) {
printf("\n%d file(s), %d dir(s)\n\n",
files, dirs);
- ret = 0;
+ *size = 0;
}
goto exit;
}
if (get_dentfromdir(mydata, startsect, subname, dentptr,
isdir ? 0 : dols) == NULL) {
if (dols && !isdir)
- ret = 0;
+ *size = 0;
goto exit;
}
subname = nextname;
}
- if (dogetsize)
- ret = FAT2CPU32(dentptr->size);
- else
- ret = get_contents(mydata, dentptr, pos, buffer, maxsize);
- debug("Size: %d, got: %ld\n", FAT2CPU32(dentptr->size), ret);
+ if (dogetsize) {
+ *size = FAT2CPU32(dentptr->size);
+ ret = 0;
+ } else {
+ ret = get_contents(mydata, dentptr, pos, buffer, maxsize, size);
+ }
+ debug("Size: %u, got: %llu\n", FAT2CPU32(dentptr->size), *size);
exit:
free(mydata->fatbuf);
return ret;
}
-long
-do_fat_read(const char *filename, void *buffer, unsigned long maxsize, int dols)
+int do_fat_read(const char *filename, void *buffer, loff_t maxsize, int dols,
+ loff_t *actread)
{
- return do_fat_read_at(filename, 0, buffer, maxsize, dols, 0);
+ return do_fat_read_at(filename, 0, buffer, maxsize, dols, 0, actread);
}
int file_fat_detectfs(void)
int file_fat_ls(const char *dir)
{
- return do_fat_read(dir, NULL, 0, LS_YES);
+ loff_t size;
+
+ return do_fat_read(dir, NULL, 0, LS_YES, &size);
}
int fat_exists(const char *filename)
{
- int sz;
- sz = do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1);
- return sz >= 0;
+ int ret;
+ loff_t size;
+
+ ret = do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1, &size);
+ return ret == 0;
}
-int fat_size(const char *filename)
+int fat_size(const char *filename, loff_t *size)
{
- return do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1);
+ return do_fat_read_at(filename, 0, NULL, 0, LS_NO, 1, size);
}
-long file_fat_read_at(const char *filename, unsigned long pos, void *buffer,
- unsigned long maxsize)
+int file_fat_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread)
{
printf("reading %s\n", filename);
- return do_fat_read_at(filename, pos, buffer, maxsize, LS_NO, 0);
+ return do_fat_read_at(filename, pos, buffer, maxsize, LS_NO, 0,
+ actread);
}
-long file_fat_read(const char *filename, void *buffer, unsigned long maxsize)
+int file_fat_read(const char *filename, void *buffer, int maxsize)
{
- return file_fat_read_at(filename, 0, buffer, maxsize);
+ loff_t actread;
+ int ret;
+
+ ret = file_fat_read_at(filename, 0, buffer, maxsize, &actread);
+ if (ret)
+ return ret;
+ else
+ return actread;
}
-int fat_read_file(const char *filename, void *buf, int offset, int len)
+int fat_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread)
{
- int len_read;
+ int ret;
- len_read = file_fat_read_at(filename, offset, buf, len);
- if (len_read == -1) {
+ ret = file_fat_read_at(filename, offset, buf, len, actread);
+ if (ret)
printf("** Unable to read file %s **\n", filename);
- return -1;
- }
- return len_read;
+ return ret;
}
void fat_close(void)
/*
* Write at most 'maxsize' bytes from 'buffer' into
* the file associated with 'dentptr'
- * Return the number of bytes read or -1 on fatal errors.
+ * Update the number of bytes written in *gotsize and return 0
+ * or return -1 on fatal errors.
*/
static int
set_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
- unsigned long maxsize)
+ loff_t maxsize, loff_t *gotsize)
{
- unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
+ loff_t filesize = FAT2CPU32(dentptr->size);
unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
__u32 curclust = START(dentptr);
__u32 endclust = 0, newclust = 0;
- unsigned long actsize;
+ loff_t actsize;
- debug("Filesize: %ld bytes\n", filesize);
+ *gotsize = 0;
+ debug("Filesize: %llu bytes\n", filesize);
if (maxsize > 0 && filesize > maxsize)
filesize = maxsize;
- debug("%ld bytes\n", filesize);
+ debug("%llu bytes\n", filesize);
actsize = bytesperclust;
endclust = curclust;
if (CHECK_CLUST(newclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", newclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
endclust = newclust;
actsize += bytesperclust;
}
/* set remaining bytes */
- gotsize += (int)actsize;
+ *gotsize += actsize;
filesize -= actsize;
buffer += actsize;
actsize = filesize;
debug("error: writing cluster\n");
return -1;
}
- gotsize += actsize;
+ *gotsize += actsize;
/* Mark end of file in FAT */
if (mydata->fatsize == 16)
newclust = 0xfffffff;
set_fatent_value(mydata, endclust, newclust);
- return gotsize;
+ return 0;
getit:
if (set_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
debug("error: writing cluster\n");
return -1;
}
- gotsize += (int)actsize;
+ *gotsize += actsize;
filesize -= actsize;
buffer += actsize;
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
debug("Invalid FAT entry\n");
- return gotsize;
+ return 0;
}
actsize = bytesperclust;
curclust = endclust = newclust;
* exceed the size of the block device
* Return -1 when overflow occurs, otherwise return 0
*/
-static int check_overflow(fsdata *mydata, __u32 clustnum, unsigned long size)
+static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size)
{
__u32 startsect, sect_num;
return NULL;
}
-static int do_fat_write(const char *filename, void *buffer,
- unsigned long size)
+static int do_fat_write(const char *filename, void *buffer, loff_t size,
+ loff_t *actwrite)
{
dir_entry *dentptr, *retdent;
__u32 startsect;
int cursect;
int ret = -1, name_len;
char l_filename[VFAT_MAXLEN_BYTES];
- int write_size = size;
+ *actwrite = size;
dir_curclust = 0;
if (read_bootsectandvi(&bs, &volinfo, &mydata->fatsize)) {
ret = check_overflow(mydata, start_cluster, size);
if (ret) {
- printf("Error: %ld overflow\n", size);
+ printf("Error: %llu overflow\n", size);
goto exit;
}
goto exit;
}
- ret = set_contents(mydata, retdent, buffer, size);
+ ret = set_contents(mydata, retdent, buffer, size, actwrite);
if (ret < 0) {
printf("Error: writing contents\n");
goto exit;
}
- write_size = ret;
- debug("attempt to write 0x%x bytes\n", write_size);
+ debug("attempt to write 0x%llx bytes\n", *actwrite);
/* Flush fat buffer */
ret = flush_fat_buffer(mydata);
ret = check_overflow(mydata, start_cluster, size);
if (ret) {
- printf("Error: %ld overflow\n", size);
+ printf("Error: %llu overflow\n", size);
goto exit;
}
fill_dentry(mydata, empty_dentptr, filename,
start_cluster, size, 0x20);
- ret = set_contents(mydata, empty_dentptr, buffer, size);
+ ret = set_contents(mydata, empty_dentptr, buffer, size,
+ actwrite);
if (ret < 0) {
printf("Error: writing contents\n");
goto exit;
}
- write_size = ret;
- debug("attempt to write 0x%x bytes\n", write_size);
+ debug("attempt to write 0x%llx bytes\n", *actwrite);
/* Flush fat buffer */
ret = flush_fat_buffer(mydata);
exit:
free(mydata->fatbuf);
- return ret < 0 ? ret : write_size;
+ return ret;
}
-int file_fat_write(const char *filename, void *buffer, unsigned long maxsize)
+int file_fat_write(const char *filename, void *buffer, loff_t offset,
+ loff_t maxsize, loff_t *actwrite)
{
+ if (offset != 0) {
+ printf("Error: non zero offset is currently not suported.\n");
+ return -1;
+ }
+
printf("writing %s\n", filename);
- return do_fat_write(filename, buffer, maxsize);
+ return do_fat_write(filename, buffer, maxsize, actwrite);
}
return filesystems[current_filesystem].ls(arg);
}
-long
-file_read(const char *filename, void *buffer, unsigned long maxsize)
+int file_read(const char *filename, void *buffer, int maxsize)
{
char fullpath[1024];
const char *arg;
*/
#include <config.h>
+#include <errno.h>
#include <common.h>
#include <part.h>
#include <ext4fs.h>
return 0;
}
-static inline int fs_size_unsupported(const char *filename)
+static inline int fs_size_unsupported(const char *filename, loff_t *size)
{
return -1;
}
static inline int fs_read_unsupported(const char *filename, void *buf,
- int offset, int len)
+ loff_t offset, loff_t len,
+ loff_t *actread)
{
return -1;
}
static inline int fs_write_unsupported(const char *filename, void *buf,
- int offset, int len)
+ loff_t offset, loff_t len,
+ loff_t *actwrite)
{
return -1;
}
{
}
+static inline int fs_uuid_unsupported(char *uuid_str)
+{
+ return -1;
+}
+
struct fstype_info {
int fstype;
/*
disk_partition_t *fs_partition);
int (*ls)(const char *dirname);
int (*exists)(const char *filename);
- int (*size)(const char *filename);
- int (*read)(const char *filename, void *buf, int offset, int len);
- int (*write)(const char *filename, void *buf, int offset, int len);
+ int (*size)(const char *filename, loff_t *size);
+ int (*read)(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actread);
+ int (*write)(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite);
void (*close)(void);
+ int (*uuid)(char *uuid_str);
};
static struct fstype_info fstypes[] = {
.exists = fat_exists,
.size = fat_size,
.read = fat_read_file,
+#ifdef CONFIG_FAT_WRITE
+ .write = file_fat_write,
+#else
.write = fs_write_unsupported,
+#endif
+ .uuid = fs_uuid_unsupported,
},
#endif
#ifdef CONFIG_FS_EXT4
.exists = ext4fs_exists,
.size = ext4fs_size,
.read = ext4_read_file,
+#ifdef CONFIG_CMD_EXT4_WRITE
+ .write = ext4_write_file,
+#else
.write = fs_write_unsupported,
+#endif
+ .uuid = ext4fs_uuid,
},
#endif
#ifdef CONFIG_SANDBOX
.size = sandbox_fs_size,
.read = fs_read_sandbox,
.write = fs_write_sandbox,
+ .uuid = fs_uuid_unsupported,
},
#endif
{
.size = fs_size_unsupported,
.read = fs_read_unsupported,
.write = fs_write_unsupported,
+ .uuid = fs_uuid_unsupported,
},
};
fs_type = FS_TYPE_ANY;
}
+int fs_uuid(char *uuid_str)
+{
+ struct fstype_info *info = fs_get_info(fs_type);
+
+ return info->uuid(uuid_str);
+}
+
int fs_ls(const char *dirname)
{
int ret;
return ret;
}
-int fs_size(const char *filename)
+int fs_size(const char *filename, loff_t *size)
{
int ret;
struct fstype_info *info = fs_get_info(fs_type);
- ret = info->size(filename);
+ ret = info->size(filename, size);
fs_close();
return ret;
}
-int fs_read(const char *filename, ulong addr, int offset, int len)
+int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actread)
{
struct fstype_info *info = fs_get_info(fs_type);
void *buf;
* means read the whole file.
*/
buf = map_sysmem(addr, len);
- ret = info->read(filename, buf, offset, len);
+ ret = info->read(filename, buf, offset, len, actread);
unmap_sysmem(buf);
/* If we requested a specific number of bytes, check we got it */
- if (ret >= 0 && len && ret != len) {
+ if (ret == 0 && len && *actread != len) {
printf("** Unable to read file %s **\n", filename);
ret = -1;
}
return ret;
}
-int fs_write(const char *filename, ulong addr, int offset, int len)
+int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actwrite)
{
struct fstype_info *info = fs_get_info(fs_type);
void *buf;
int ret;
buf = map_sysmem(addr, len);
- ret = info->write(filename, buf, offset, len);
+ ret = info->write(filename, buf, offset, len, actwrite);
unmap_sysmem(buf);
- if (ret >= 0 && ret != len) {
+ if (ret < 0 && len != *actwrite) {
printf("** Unable to write file %s **\n", filename);
ret = -1;
}
int do_size(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
int fstype)
{
- int size;
+ loff_t size;
if (argc != 4)
return CMD_RET_USAGE;
if (fs_set_blk_dev(argv[1], argv[2], fstype))
return 1;
- size = fs_size(argv[3]);
- if (size < 0)
+ if (fs_size(argv[3], &size) < 0)
return CMD_RET_FAILURE;
setenv_hex("filesize", size);
unsigned long addr;
const char *addr_str;
const char *filename;
- unsigned long bytes;
- unsigned long pos;
- int len_read;
+ loff_t bytes;
+ loff_t pos;
+ loff_t len_read;
+ int ret;
unsigned long time;
char *ep;
pos = 0;
time = get_timer(0);
- len_read = fs_read(filename, addr, pos, bytes);
+ ret = fs_read(filename, addr, pos, bytes, &len_read);
time = get_timer(time);
- if (len_read <= 0)
+ if (ret < 0)
return 1;
- printf("%d bytes read in %lu ms", len_read, time);
+ printf("%llu bytes read in %lu ms", len_read, time);
if (time > 0) {
puts(" (");
print_size(len_read / time * 1000, "/s");
{
unsigned long addr;
const char *filename;
- unsigned long bytes;
- unsigned long pos;
- int len;
+ loff_t bytes;
+ loff_t pos;
+ loff_t len;
+ int ret;
unsigned long time;
if (argc < 6 || argc > 7)
if (fs_set_blk_dev(argv[1], argv[2], fstype))
return 1;
- filename = argv[3];
- addr = simple_strtoul(argv[4], NULL, 16);
+ addr = simple_strtoul(argv[3], NULL, 16);
+ filename = argv[4];
bytes = simple_strtoul(argv[5], NULL, 16);
if (argc >= 7)
pos = simple_strtoul(argv[6], NULL, 16);
pos = 0;
time = get_timer(0);
- len = fs_write(filename, addr, pos, bytes);
+ ret = fs_write(filename, addr, pos, bytes, &len);
time = get_timer(time);
- if (len <= 0)
+ if (ret < 0)
return 1;
- printf("%d bytes written in %lu ms", len, time);
+ printf("%llu bytes written in %lu ms", len, time);
if (time > 0) {
puts(" (");
print_size(len / time * 1000, "/s");
return 0;
}
+
+int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype)
+{
+ int ret;
+ char uuid[37];
+ memset(uuid, 0, sizeof(uuid));
+
+ if (argc < 3 || argc > 4)
+ return CMD_RET_USAGE;
+
+ if (fs_set_blk_dev(argv[1], argv[2], fstype))
+ return 1;
+
+ ret = fs_uuid(uuid);
+ if (ret)
+ return CMD_RET_FAILURE;
+
+ if (argc == 4)
+ setenv(argv[3], uuid);
+ else
+ printf("%s\n", uuid);
+
+ return CMD_RET_SUCCESS;
+}
return 0;
}
-long sandbox_fs_read_at(const char *filename, unsigned long pos,
- void *buffer, unsigned long maxsize)
+int sandbox_fs_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread)
{
- ssize_t size;
+ loff_t size;
int fd, ret;
fd = os_open(filename, OS_O_RDONLY);
os_close(fd);
return ret;
}
- if (!maxsize)
- maxsize = os_get_filesize(filename);
+ if (!maxsize) {
+ ret = os_get_filesize(filename, &size);
+ if (ret) {
+ os_close(fd);
+ return ret;
+ }
+
+ maxsize = size;
+ }
+
size = os_read(fd, buffer, maxsize);
os_close(fd);
- return size;
+ if (size < 0) {
+ ret = -1;
+ } else {
+ ret = 0;
+ *actread = size;
+ }
+
+ return ret;
}
-long sandbox_fs_write_at(const char *filename, unsigned long pos,
- void *buffer, unsigned long towrite)
+int sandbox_fs_write_at(const char *filename, loff_t pos, void *buffer,
+ loff_t towrite, loff_t *actwrite)
{
ssize_t size;
int fd, ret;
size = os_write(fd, buffer, towrite);
os_close(fd);
- return size;
+ if (size == -1) {
+ ret = -1;
+ } else {
+ ret = 0;
+ *actwrite = size;
+ }
+
+ return ret;
}
int sandbox_fs_ls(const char *dirname)
int sandbox_fs_exists(const char *filename)
{
- ssize_t sz;
+ loff_t size;
+ int ret;
- sz = os_get_filesize(filename);
- return sz >= 0;
+ ret = os_get_filesize(filename, &size);
+ return ret == 0;
}
-int sandbox_fs_size(const char *filename)
+int sandbox_fs_size(const char *filename, loff_t *size)
{
- return os_get_filesize(filename);
+ return os_get_filesize(filename, size);
}
void sandbox_fs_close(void)
{
}
-int fs_read_sandbox(const char *filename, void *buf, int offset, int len)
+int fs_read_sandbox(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread)
{
- int len_read;
+ int ret;
- len_read = sandbox_fs_read_at(filename, offset, buf, len);
- if (len_read == -1) {
+ ret = sandbox_fs_read_at(filename, offset, buf, len, actread);
+ if (ret)
printf("** Unable to read file %s **\n", filename);
- return -1;
- }
- return len_read;
+ return ret;
}
-int fs_write_sandbox(const char *filename, void *buf, int offset, int len)
+int fs_write_sandbox(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite)
{
- int len_written;
+ int ret;
- len_written = sandbox_fs_write_at(filename, offset, buf, len);
- if (len_written == -1) {
+ ret = sandbox_fs_write_at(filename, offset, buf, len, actwrite);
+ if (ret)
printf("** Unable to write file %s **\n", filename);
- return -1;
- }
- return len_written;
+ return ret;
}
#define MAX_LFS_FILESIZE 0x7fffffffffffffffUL
#endif
-#define INT_MAX ((int)(~0U>>1))
-#define INT_MIN (-INT_MAX - 1)
-#define LLONG_MAX ((long long)(~0ULL>>1))
-
/*
* These are the fs-independent mount-flags: up to 32 flags are supported
*/
#include <linux/stringify.h>
#include <asm/ptrace.h>
#include <stdarg.h>
+#include <linux/kernel.h>
#if defined(CONFIG_PCI) && defined(CONFIG_4xx)
#include <pci.h>
#endif
#define _DEBUG 0
#endif
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
-#define debug_cond(cond, fmt, args...) \
- do { \
- if (cond) \
- printf(fmt, ##args); \
+#define debug_cond(cond, fmt, args...) \
+ do { \
+ if (cond) \
+ printf(pr_fmt(fmt), ##args); \
} while (0)
#define debug(fmt, args...) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
#define error(fmt, args...) do { \
- printf("ERROR: " fmt "\nat %s:%d/%s()\n", \
+ printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \
##args, __FILE__, __LINE__, __func__); \
} while (0)
# endif
#endif
-/*
- * General Purpose Utilities
- */
-#define min(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x < __y) ? __x : __y; })
-
-#define max(X, Y) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- (__x > __y) ? __x : __y; })
-
-#define min3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x < __y ? (__x < __z ? __x : __z) : \
- (__y < __z ? __y : __z); })
-
-#define max3(X, Y, Z) \
- ({ typeof(X) __x = (X); \
- typeof(Y) __y = (Y); \
- typeof(Z) __z = (Z); \
- __x > __y ? (__x > __z ? __x : __z) : \
- (__y > __z ? __y : __z); })
-
-/*
- * Return the absolute value of a number.
- *
- * This handles unsigned and signed longs, ints, shorts and chars. For all
- * input types abs() returns a signed long.
- *
- * For 64-bit types, use abs64()
- */
-#define abs(x) ({ \
- long ret; \
- if (sizeof(x) == sizeof(long)) { \
- long __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } else { \
- int __x = (x); \
- ret = (__x < 0) ? -__x : __x; \
- } \
- ret; \
- })
-
-#define abs64(x) ({ \
- s64 __x = (x); \
- (__x < 0) ? -__x : __x; \
- })
-
#if defined(CONFIG_ENV_IS_EMBEDDED)
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
#endif
-/**
- * container_of - cast a member of a structure out to the containing structure
- * @ptr: the pointer to the member.
- * @type: the type of the container struct this is embedded in.
- * @member: the name of the member within the struct.
- *
- */
-#define container_of(ptr, type, member) ({ \
- const typeof( ((type *)0)->member ) *__mptr = (ptr); \
- (type *)( (char *)__mptr - offsetof(type,member) );})
-
/*
* Function Prototypes
*/
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
#define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1))
-#define DIV_ROUND(n,d) (((n) + ((d)/2)) / (d))
-#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-
-/*
- * Divide positive or negative dividend by positive divisor and round
- * to closest integer. Result is undefined for negative divisors and
- * for negative dividends if the divisor variable type is unsigned.
- */
-#define DIV_ROUND_CLOSEST(x, divisor)( \
-{ \
- typeof(x) __x = x; \
- typeof(divisor) __d = divisor; \
- (((typeof(x))-1) > 0 || \
- ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
- (((__x) + ((__d) / 2)) / (__d)) : \
- (((__x) - ((__d) / 2)) / (__d)); \
-} \
-)
-
-#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
-#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
/*
* ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It
* Usage of this macro shall be avoided or used with extreme care!
*/
#define DEFINE_ALIGN_BUFFER(type, name, size, align) \
- static char __##name[roundup(size * sizeof(type), align)] \
+ static char __##name[ALIGN(size * sizeof(type), align)] \
__aligned(align); \
\
static type *name = (type *)__##name
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_CMDLINE_EDITING /* Command-line editing */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM920T /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_VCMA9 /* on a MPL VCMA9 Board */
#define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */
/*
* SoC configurations
*/
-#define CONFIG_ARM926EJS /* this is an ARM926EJS CPU */
-#define CONFIG_MX27 /* in a Freescale i.MX27 Chip */
+#define CONFIG_MX27 /* This is a Freescale i.MX27 Chip */
#define CONFIG_MACH_TYPE 1698 /* APF27 */
#define CONFIG_SYS_GENERIC_BOARD
#define __ARMADILLO_800EVA_H
#undef DEBUG
-#define CONFIG_ARMV7
#define CONFIG_R8A7740
#define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n"
#define CONFIG_SH_GPIO_PFC
#include <linux/sizes.h>
#include <asm/arch/sysmap.h>
-/* Architecture, CPU, chip, mach, etc */
-#define CONFIG_ARMV7
+/* CPU, chip, mach, etc */
#define CONFIG_KONA
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_GENERIC_BOARD
#include <asm/arch/configs.h>
-/* Architecture, CPU, chip, etc */
-#define CONFIG_ARMV7
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_GENERIC_BOARD
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_CALIMAIN
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM365
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
-#define CONFIG_ARM920T
#define CONFIG_AT91RM9200
#define CONFIG_CPUAT91
#define USE_920T_MMU
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA830_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA830 /* TI DA830 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM355
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM355 /* DM355 based board */
#define CONFIG_SYS_CONSOLE_INFO_QUIET
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SOC_DM365
#define CONFIG_SKIP_LOWLEVEL_INIT
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU */
/* Clock rates detection */
#ifndef __ASSEMBLY__
/*===================*/
/* SoC Configuration */
/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
/*===================*/
/* SoC Configuration */
/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
#define CONFIG_SYS_USE_NAND
#define CONFIG_SYS_USE_DSPLINK /* don't power up the DSP. */
/* SoC Configuration */
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
/*===================*/
/* SoC Configuration */
/*===================*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SOC_DM644X
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#endif
/* High-level configuration options */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
-#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
+#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */
#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
*/
#define CONFIG_MARVELL 1
-#define CONFIG_ARM926EJS 1 /* Basic Architecture */
#define CONFIG_FEROCEON 1 /* CPU Core subversion */
#define CONFIG_88F5182 1 /* SOC Name */
#define CONFIG_MACH_EDMINIV2 1 /* Machine type */
/*
* SoC Configuration
*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_SYS_DCACHE_OFF
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_HAWK
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ sizeof(CONFIG_SYS_PROMPT)+16)
/*
* SoC Configuration
*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX27
#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31 1 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_MX31_CLK32 32000
#define CONFIG_DISPLAY_CPUINFO
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
#define CONFIG_MB86R0x_IOCLK get_bus_freq(0)
#define CONFIG_SYS_TEXT_BASE 0x10000000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_SYS_THUMB_BUILD
/* SoC Configuration */
-#define CONFIG_ARMV7
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_ARCH_TIMER
#define CONFIG_SYS_TEXT_BASE 0x0c001000
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE \
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 1 /* in a mx31 */
+#define CONFIG_MX31 1 /* This is a mx31 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_SYS_GENERIC_BOARD
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_DISPLAY_CPUINFO
#include <nomadik.h>
-#define CONFIG_ARM926EJS
#define CONFIG_NOMADIK_8815 /* cpu variant */
#define CONFIG_SKIP_LOWLEVEL_INIT /* we have already been loaded to RAM */
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */
#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
-#define CONFIG_MX31 /* in a mx31 */
+#define CONFIG_MX31 /* This is a mx31 */
#define CONFIG_QONG
#define CONFIG_DISPLAY_CPUINFO
/* Architecture, CPU, etc.*/
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_ARM1176
#define CONFIG_BCM2835
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FS_FAT
+#define CONFIG_FAT_WRITE
#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#define CONFIG_HOST_MAX_DEVICES 4
#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_MD5SUM
#define CONFIG_SYS_VSNPRINTF
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
-#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */
#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
#define CONFIG_IMX_SERIAL
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM920T /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_S3C24X0 /* This is a SAMSUNG S3C24x0-type SoC */
#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_SMDK2410 /* on a SAMSUNG SMDK2410 Board */
/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
-#define CONFIG_ARMV7
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SOCFPGA
/*
* High Level Configuration Options
*/
-#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
#define CONFIG_OMAP /* in a TI OMAP core */
#define CONFIG_OMAP_GPIO
#include <asm/arch/clock.h>
/* Architecture, CPU, etc */
-#define CONFIG_ARM1176
#define CONFIG_TNETV107X
#define CONFIG_TNETV107X_EVM
#define CONFIG_TNETV107X_WATCHDOG
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136
#define CONFIG_MX31
#define CONFIG_DISPLAY_CPUINFO
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */
+#define CONFIG_VERSATILE 1 /* This is Versatile Platform Board */
#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
#define CONFIG_SYS_MEMTEST_START 0x100000
#include <asm/arch/imx-regs.h>
/* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
#define CONFIG_MX35
#define CONFIG_MX35_HCLK_FREQ 24000000
#include <asm/arch/imx-regs.h>
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_MX25
#define CONFIG_SYS_TEXT_BASE 0xA0000000
#ifndef __CONFIG_ZYNQ_COMMON_H
#define __CONFIG_ZYNQ_COMMON_H
-/* High Level configuration Options */
-#define CONFIG_ARMV7
-
/* CPU clock */
#ifndef CONFIG_CPU_FREQ_HZ
# define CONFIG_CPU_FREQ_HZ 800000000
void ext4fs_deinit(void);
int ext4fs_filename_check(char *filename);
int ext4fs_write(const char *fname, unsigned char *buffer,
- unsigned long sizebytes);
+ unsigned long sizebytes);
+int ext4_write_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actwrite);
#endif
struct ext_filesystem *get_fs(void);
-int ext4fs_open(const char *filename);
-int ext4fs_read(char *buf, unsigned len);
+int ext4fs_open(const char *filename, loff_t *len);
+int ext4fs_read(char *buf, loff_t len, loff_t *actread);
int ext4fs_mount(unsigned part_length);
void ext4fs_close(void);
void ext4fs_reinit_global(void);
int ext4fs_ls(const char *dirname);
int ext4fs_exists(const char *filename);
-int ext4fs_size(const char *filename);
+int ext4fs_size(const char *filename, loff_t *size);
void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot);
int ext4fs_devread(lbaint_t sector, int byte_offset, int byte_len, char *buf);
void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
long int read_allocated_block(struct ext2_inode *inode, int fileblock);
int ext4fs_probe(block_dev_desc_t *fs_dev_desc,
disk_partition_t *fs_partition);
-int ext4_read_file(const char *filename, void *buf, int offset, int len);
+int ext4_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread);
int ext4_read_superblock(char *buffer);
+int ext4fs_uuid(char *uuid_str);
#endif
typedef int (file_detectfs_func)(void);
typedef int (file_ls_func)(const char *dir);
-typedef long (file_read_func)(const char *filename, void *buffer,
- unsigned long maxsize);
+typedef int (file_read_func)(const char *filename, void *buffer,
+ int maxsize);
struct filesystem {
file_detectfs_func *detect;
int file_fat_detectfs(void);
int file_fat_ls(const char *dir);
int fat_exists(const char *filename);
-int fat_size(const char *filename);
-long file_fat_read_at(const char *filename, unsigned long pos, void *buffer,
- unsigned long maxsize);
-long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
+int fat_size(const char *filename, loff_t *size);
+int file_fat_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread);
+int file_fat_read(const char *filename, void *buffer, int maxsize);
const char *file_getfsname(int idx);
int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
-int file_fat_write(const char *filename, void *buffer, unsigned long maxsize);
-int fat_read_file(const char *filename, void *buf, int offset, int len);
+int file_fat_write(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actwrite);
+int fat_read_file(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread);
void fat_close(void);
#endif /* _FAT_H_ */
int fs_exists(const char *filename);
/*
- * Determine a file's size
+ * fs_size - Determine a file's size
*
- * Returns the file's size in bytes, or a negative value if it doesn't exist.
+ * @filename: Name of the file
+ * @size: Size of file
+ * @return 0 if ok with valid *size, negative on error
*/
-int fs_size(const char *filename);
+int fs_size(const char *filename, loff_t *size);
/*
- * Read file "filename" from the partition previously set by fs_set_blk_dev(),
- * to address "addr", starting at byte offset "offset", and reading "len"
- * bytes. "offset" may be 0 to read from the start of the file. "len" may be
- * 0 to read the entire file. Note that not all filesystem types support
- * either/both offset!=0 or len!=0.
+ * fs_read - Read file from the partition previously set by fs_set_blk_dev()
+ * Note that not all filesystem types support either/both offset!=0 or len!=0.
*
- * Returns number of bytes read on success. Returns <= 0 on error.
+ * @filename: Name of file to read from
+ * @addr: The address to read into
+ * @offset: The offset in file to read from
+ * @len: The number of bytes to read. Maybe 0 to read entire file
+ * @actread: Returns the actual number of bytes read
+ * @return 0 if ok with valid *actread, -1 on error conditions
*/
-int fs_read(const char *filename, ulong addr, int offset, int len);
+int fs_read(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actread);
/*
- * Write file "filename" to the partition previously set by fs_set_blk_dev(),
- * from address "addr", starting at byte offset "offset", and writing "len"
- * bytes. "offset" may be 0 to write to the start of the file. Note that not
- * all filesystem types support offset!=0.
+ * fs_write - Write file to the partition previously set by fs_set_blk_dev()
+ * Note that not all filesystem types support offset!=0.
*
- * Returns number of bytes read on success. Returns <= 0 on error.
+ * @filename: Name of file to read from
+ * @addr: The address to read into
+ * @offset: The offset in file to read from. Maybe 0 to write to start of file
+ * @len: The number of bytes to write
+ * @actwrite: Returns the actual number of bytes written
+ * @return 0 if ok with valid *actwrite, -1 on error conditions
*/
-int fs_write(const char *filename, ulong addr, int offset, int len);
+int fs_write(const char *filename, ulong addr, loff_t offset, loff_t len,
+ loff_t *actwrite);
/*
* Common implementation for various filesystem commands, optionally limited
int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
int fstype);
+/*
+ * Determine the UUID of the specified filesystem and print it. Optionally it is
+ * possible to store the UUID directly in env.
+ */
+int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+ int fstype);
+
#endif /* _FS_H */
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
-/*
- * ..and if you can't take the strict
- * types, you can specify one yourself.
- *
- * Or not use min/max at all, of course.
- */
-#define min_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-#define max_t(type,x,y) \
- ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
-
#ifndef BUG
#define BUG() do { \
printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \
#define PAGE_SIZE 4096
-/**
- * upper_32_bits - return MSB bits 32-63 of a number if little endian, or
- * return MSB bits 0-31 of a number if big endian.
- * @n: the number we're accessing
- *
- * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
- * the "right shift count >= width of type" warning when that quantity is
- * 32-bits.
- */
-#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
-
-/**
- * lower_32_bits - return LSB bits 0-31 of a number if little endian, or
- * return LSB bits 32-63 of a number if big endian.
- * @n: the number we're accessing
- */
-#define lower_32_bits(n) ((u32)(n))
-
/* drivers/char/random.c */
#define get_random_bytes(...)
#define ENOTSUPP 524 /* Operation is not supported */
-/* from include/linux/kernel.h */
-/*
- * This looks more complex than it should be. But we need to
- * get the type for the ~ right in round_down (it needs to be
- * as wide as the result!), and we want to evaluate the macro
- * arguments just once each.
- */
-#define __round_mask(x, y) ((__typeof__(x))((y)-1))
-#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
-#define round_down(x, y) ((x) & ~__round_mask(x, y))
-
/* module */
#define THIS_MODULE 0
#define try_module_get(...) 1
#define blocking_notifier_call_chain(...) 0
-/*
- * Multiplies an integer by a fraction, while avoiding unnecessary
- * overflow or loss of precision.
- */
-#define mult_frac(x, numer, denom)( \
-{ \
- typeof(x) quot = (x) / (denom); \
- typeof(x) rem = (x) % (denom); \
- (quot * (numer)) + ((rem * (numer)) / (denom)); \
-} \
-)
-
#define __initdata
#define late_initcall(...)
#define cond_resched() do { } while (0)
#define yield() do { } while (0)
-#define INT_MAX ((int)(~0U>>1))
-
#define __user
#define __init
#define __exit
--- /dev/null
+#ifndef _LINUX_KERNEL_H
+#define _LINUX_KERNEL_H
+
+
+#include <linux/types.h>
+
+#define USHRT_MAX ((u16)(~0U))
+#define SHRT_MAX ((s16)(USHRT_MAX>>1))
+#define SHRT_MIN ((s16)(-SHRT_MAX - 1))
+#define INT_MAX ((int)(~0U>>1))
+#define INT_MIN (-INT_MAX - 1)
+#define UINT_MAX (~0U)
+#define LONG_MAX ((long)(~0UL>>1))
+#define LONG_MIN (-LONG_MAX - 1)
+#define ULONG_MAX (~0UL)
+#define LLONG_MAX ((long long)(~0ULL>>1))
+#define LLONG_MIN (-LLONG_MAX - 1)
+#define ULLONG_MAX (~0ULL)
+#define SIZE_MAX (~(size_t)0)
+
+#define U8_MAX ((u8)~0U)
+#define S8_MAX ((s8)(U8_MAX>>1))
+#define S8_MIN ((s8)(-S8_MAX - 1))
+#define U16_MAX ((u16)~0U)
+#define S16_MAX ((s16)(U16_MAX>>1))
+#define S16_MIN ((s16)(-S16_MAX - 1))
+#define U32_MAX ((u32)~0U)
+#define S32_MAX ((s32)(U32_MAX>>1))
+#define S32_MIN ((s32)(-S32_MAX - 1))
+#define U64_MAX ((u64)~0ULL)
+#define S64_MAX ((s64)(U64_MAX>>1))
+#define S64_MIN ((s64)(-S64_MAX - 1))
+
+#define STACK_MAGIC 0xdeadbeef
+
+#define REPEAT_BYTE(x) ((~0ul / 0xff) * (x))
+
+#define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1)
+#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask))
+#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a)))
+#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/*
+ * This looks more complex than it should be. But we need to
+ * get the type for the ~ right in round_down (it needs to be
+ * as wide as the result!), and we want to evaluate the macro
+ * arguments just once each.
+ */
+#define __round_mask(x, y) ((__typeof__(x))((y)-1))
+#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1)
+#define round_down(x, y) ((x) & ~__round_mask(x, y))
+
+#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+
+#if BITS_PER_LONG == 32
+# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP_ULL(ll, d)
+#else
+# define DIV_ROUND_UP_SECTOR_T(ll,d) DIV_ROUND_UP(ll,d)
+#endif
+
+/* The `const' in roundup() prevents gcc-3.3 from calling __divdi3 */
+#define roundup(x, y) ( \
+{ \
+ const typeof(y) __y = y; \
+ (((x) + (__y - 1)) / __y) * __y; \
+} \
+)
+#define rounddown(x, y) ( \
+{ \
+ typeof(x) __x = (x); \
+ __x - (__x % (y)); \
+} \
+)
+
+/*
+ * Divide positive or negative dividend by positive divisor and round
+ * to closest integer. Result is undefined for negative divisors and
+ * for negative dividends if the divisor variable type is unsigned.
+ */
+#define DIV_ROUND_CLOSEST(x, divisor)( \
+{ \
+ typeof(x) __x = x; \
+ typeof(divisor) __d = divisor; \
+ (((typeof(x))-1) > 0 || \
+ ((typeof(divisor))-1) > 0 || (__x) > 0) ? \
+ (((__x) + ((__d) / 2)) / (__d)) : \
+ (((__x) - ((__d) / 2)) / (__d)); \
+} \
+)
+
+/*
+ * Multiplies an integer by a fraction, while avoiding unnecessary
+ * overflow or loss of precision.
+ */
+#define mult_frac(x, numer, denom)( \
+{ \
+ typeof(x) quot = (x) / (denom); \
+ typeof(x) rem = (x) % (denom); \
+ (quot * (numer)) + ((rem * (numer)) / (denom)); \
+} \
+)
+
+/**
+ * upper_32_bits - return bits 32-63 of a number
+ * @n: the number we're accessing
+ *
+ * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
+ * the "right shift count >= width of type" warning when that quantity is
+ * 32-bits.
+ */
+#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))
+
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((u32)(n))
+
+/*
+ * abs() handles unsigned and signed longs, ints, shorts and chars. For all
+ * input types abs() returns a signed long.
+ * abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()
+ * for those.
+ */
+#define abs(x) ({ \
+ long ret; \
+ if (sizeof(x) == sizeof(long)) { \
+ long __x = (x); \
+ ret = (__x < 0) ? -__x : __x; \
+ } else { \
+ int __x = (x); \
+ ret = (__x < 0) ? -__x : __x; \
+ } \
+ ret; \
+ })
+
+#define abs64(x) ({ \
+ s64 __x = (x); \
+ (__x < 0) ? -__x : __x; \
+ })
+
+/*
+ * min()/max()/clamp() macros that also do
+ * strict type-checking.. See the
+ * "unnecessary" pointer comparison.
+ */
+#define min(x, y) ({ \
+ typeof(x) _min1 = (x); \
+ typeof(y) _min2 = (y); \
+ (void) (&_min1 == &_min2); \
+ _min1 < _min2 ? _min1 : _min2; })
+
+#define max(x, y) ({ \
+ typeof(x) _max1 = (x); \
+ typeof(y) _max2 = (y); \
+ (void) (&_max1 == &_max2); \
+ _max1 > _max2 ? _max1 : _max2; })
+
+#define min3(x, y, z) min((typeof(x))min(x, y), z)
+#define max3(x, y, z) max((typeof(x))max(x, y), z)
+
+/**
+ * min_not_zero - return the minimum that is _not_ zero, unless both are zero
+ * @x: value1
+ * @y: value2
+ */
+#define min_not_zero(x, y) ({ \
+ typeof(x) __x = (x); \
+ typeof(y) __y = (y); \
+ __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
+
+/**
+ * clamp - return a value clamped to a given range with strict typechecking
+ * @val: current value
+ * @lo: lowest allowable value
+ * @hi: highest allowable value
+ *
+ * This macro does strict typechecking of lo/hi to make sure they are of the
+ * same type as val. See the unnecessary pointer comparisons.
+ */
+#define clamp(val, lo, hi) min((typeof(val))max(val, lo), hi)
+
+/*
+ * ..and if you can't take the strict
+ * types, you can specify one yourself.
+ *
+ * Or not use min/max/clamp at all, of course.
+ */
+#define min_t(type, x, y) ({ \
+ type __min1 = (x); \
+ type __min2 = (y); \
+ __min1 < __min2 ? __min1: __min2; })
+
+#define max_t(type, x, y) ({ \
+ type __max1 = (x); \
+ type __max2 = (y); \
+ __max1 > __max2 ? __max1: __max2; })
+
+/**
+ * clamp_t - return a value clamped to a given range using a given type
+ * @type: the type of variable to use
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of type
+ * 'type' to make all the comparisons.
+ */
+#define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi)
+
+/**
+ * clamp_val - return a value clamped to a given range using val's type
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of whatever
+ * type the input argument 'val' is. This is useful when val is an unsigned
+ * type and min and max are literals that will otherwise be assigned a signed
+ * integer type.
+ */
+#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
+
+
+/*
+ * swap - swap value of @a and @b
+ */
+#define swap(a, b) \
+ do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ * @ptr: the pointer to the member.
+ * @type: the type of the container struct this is embedded in.
+ * @member: the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({ \
+ const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+ (type *)( (char *)__mptr - offsetof(type,member) );})
+
+#endif
* Get the size of a file
*
* @param fname Filename to check
- * @return size of file, or -1 if an error ocurred
+ * @param size size of file is returned if no error
+ * @return 0 on success or -1 if an error ocurred
*/
-ssize_t os_get_filesize(const char *fname);
+int os_get_filesize(const char *fname, loff_t *size);
/**
* Write a character to the controlling OS terminal
extern struct pci_controller* pci_bus_to_hose(int bus);
extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr);
+extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev);
extern int pci_hose_scan(struct pci_controller *hose);
extern int pci_hose_scan_bus(struct pci_controller *hose, int bus);
int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
-long sandbox_fs_read_at(const char *filename, unsigned long pos,
- void *buffer, unsigned long maxsize);
+int sandbox_fs_read_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actread);
+int sandbox_fs_write_at(const char *filename, loff_t pos, void *buffer,
+ loff_t maxsize, loff_t *actwrite);
void sandbox_fs_close(void);
int sandbox_fs_ls(const char *dirname);
int sandbox_fs_exists(const char *filename);
-int sandbox_fs_size(const char *filename);
-int fs_read_sandbox(const char *filename, void *buf, int offset, int len);
-int fs_write_sandbox(const char *filename, void *buf, int offset, int len);
+int sandbox_fs_size(const char *filename, loff_t *size);
+int fs_read_sandbox(const char *filename, void *buf, loff_t offset, loff_t len,
+ loff_t *actread);
+int fs_write_sandbox(const char *filename, void *buf, loff_t offset,
+ loff_t len, loff_t *actwrite);
#endif
long l, n;
long m;
- n = DIV_ROUND(hz, 1000) / 1000L;
+ n = DIV_ROUND_CLOSEST(hz, 1000) / 1000L;
l = sprintf (buf, "%ld", n);
hz -= n * 1000000L;
- m = DIV_ROUND(hz, 1000L);
+ m = DIV_ROUND_CLOSEST(hz, 1000L);
if (m != 0)
sprintf (buf + l, ".%03ld", m);
return (buf);
#include <div64.h>
#define noinline __attribute__((noinline))
-/* some reluctance to put this into a new limits.h, so it is here */
-#define INT_MAX ((int)(~0U>>1))
-
unsigned long simple_strtoul(const char *cp, char **endp,
unsigned int base)
{
static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
int field_width, int precision, int flags)
{
+ u64 num = (uintptr_t)ptr;
+
/*
* Being a boot loader, we explicitly allow pointers to
* (physical) address null.
#ifdef CONFIG_CMD_NET
switch (*fmt) {
+ case 'a':
+ flags |= SPECIAL | ZEROPAD;
+
+ switch (fmt[1]) {
+ case 'p':
+ default:
+ field_width = sizeof(phys_addr_t) * 2 + 2;
+ num = *(phys_addr_t *)ptr;
+ break;
+ }
+ break;
case 'm':
flags |= SPECIAL;
/* Fallthrough */
field_width = 2*sizeof(void *);
flags |= ZEROPAD;
}
- return number(buf, end, (unsigned long)ptr, 16, field_width,
- precision, flags);
+ return number(buf, end, num, 16, field_width, precision, flags);
}
static int vsnprintf_internal(char *buf, size_t size, const char *fmt,
libs-y += $(CPUDIR)/
-ifdef SOC
-libs-y += $(CPUDIR)/$(SOC)/
-endif
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
-libs-$(if $(CONFIG_CMD_NAND),$(CONFIG_SPL_NAND_SUPPORT)) += drivers/mtd/nand/
+libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
--- /dev/null
+#!/bin/bash
+#
+# (C) Copyright 2014 Suriyan Ramasami
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+# Invoke this test script from U-Boot base directory as ./test/fs/fs-test.sh
+# It currently tests the fs/sb and native commands for ext4 and fat partitions
+# Expected results are as follows:
+# EXT4 tests:
+# fs-test.sb.ext4.out: Summary: PASS: 17 FAIL: 2
+# fs-test.ext4.out: Summary: PASS: 11 FAIL: 8
+# fs-test.fs.ext4.out: Summary: PASS: 11 FAIL: 8
+# FAT tests:
+# fs-test.sb.fat.out: Summary: PASS: 17 FAIL: 2
+# fs-test.fat.out: Summary: PASS: 19 FAIL: 0
+# fs-test.fs.fat.out: Summary: PASS: 19 FAIL: 0
+# Total Summary: TOTAL PASS: 94 TOTAL FAIL: 20
+
+# pre-requisite binaries list.
+PREREQ_BINS="md5sum mkfs mount umount dd fallocate mkdir"
+
+# All generated output files from this test will be in $OUT_DIR
+# Hence everything is sandboxed.
+OUT_DIR="sandbox/test/fs"
+
+# Location of generated sandbox u-boot
+UBOOT="./sandbox/u-boot"
+
+# Our mount directory will be in the sandbox
+MOUNT_DIR="${OUT_DIR}/mnt"
+
+# The file system image we create will have the $IMG prefix.
+IMG="${OUT_DIR}/3GB"
+
+# $SMALL_FILE is the name of the 1MB file in the file system image
+SMALL_FILE="1MB.file"
+
+# $BIG_FILE is the name of the 2.5GB file in the file system image
+BIG_FILE="2.5GB.file"
+
+# $MD5_FILE will have the expected md5s when we do the test
+# They shall have a suffix which represents their file system (ext4/fat)
+MD5_FILE="${OUT_DIR}/md5s.list"
+
+# $OUT shall be the prefix of the test output. Their suffix will be .out
+OUT="${OUT_DIR}/fs-test"
+
+# Full Path of the 1 MB file that shall be created in the fs image.
+MB1="${MOUNT_DIR}/${SMALL_FILE}"
+GB2p5="${MOUNT_DIR}/${BIG_FILE}"
+
+# ************************
+# * Functions start here *
+# ************************
+
+# Check if the prereq binaries exist, or exit
+function check_prereq() {
+ for prereq in $PREREQ_BINS; do
+ if [ ! -x `which $prereq` ]; then
+ echo "Missing $prereq binary. Exiting!"
+ exit
+ fi
+ done
+
+ # We use /dev/urandom to create files. Check if it exists.
+ if [ ! -c /dev/urandom ]; then
+ echo "Missing character special /dev/urandom. Exiting!"
+ exit
+ fi
+}
+
+# If 1st param is "clean", then clean out the generated files and exit
+function check_clean() {
+ if [ "$1" = "clean" ]; then
+ rm -rf "$OUT_DIR"
+ echo "Cleaned up generated files. Exiting"
+ exit
+ fi
+}
+
+# Generate sandbox U-Boot - gleaned from /test/dm/test-dm.sh
+function compile_sandbox() {
+ unset CROSS_COMPILE
+ NUM_CPUS=$(cat /proc/cpuinfo |grep -c processor)
+ make O=sandbox sandbox_config
+ make O=sandbox -s -j${NUM_CPUS}
+
+ # Check if U-Boot exists
+ if [ ! -x "$UBOOT" ]; then
+ echo "$UBOOT does not exist or is not executable"
+ echo "Build error?"
+ echo "Please run this script as ./test/fs/`basename $0`"
+ exit
+ fi
+}
+
+# Clean out all generated files other than the file system images
+# We save time by not deleting and recreating the file system images
+function prepare_env() {
+ rm -f ${MD5_FILE}.* ${OUT}.*
+ mkdir ${OUT_DIR}
+}
+
+# 1st parameter is the name of the image file to be created
+# 2nd parameter is the filesystem - fat ext4 etc
+# -F cant be used with fat as it means something else.
+function create_image() {
+ # Create image if not already present - saves time, while debugging
+ if [ "$2" = "ext4" ]; then
+ MKFS_OPTION="-F"
+ else
+ MKFS_OPTION=""
+ fi
+ if [ ! -f "$1" ]; then
+ fallocate -l 3G "$1" &> /dev/null
+ mkfs -t "$2" $MKFS_OPTION "$1" &> /dev/null
+ if [ $? -ne 0 -a "$2" = "fat" ]; then
+ # If we fail and we did fat, try vfat.
+ mkfs -t vfat $MKFS_OPTION "$1" &> /dev/null
+ fi
+ fi
+}
+
+# 1st parameter is the FS type: fat/ext4
+# 2nd parameter is the name of small file
+# Returns filename which can be used for fat or ext4 for writing
+function fname_for_write() {
+ case $1 in
+ ext4)
+ # ext4 needs absolute path name of file
+ echo /${2}.w
+ ;;
+
+ *)
+ echo ${2}.w
+ ;;
+ esac
+}
+
+# 1st parameter is image file
+# 2nd parameter is file system type - fat/ext4
+# 3rd parameter is name of small file
+# 4th parameter is name of big file
+# 5th parameter is fs/nonfs/sb - to dictate generic fs commands or
+# otherwise or sb hostfs
+# 6th parameter is the directory path for the files. Its "" for generic
+# fs and ext4/fat and full patch for sb hostfs
+# UBOOT is set in env
+function test_image() {
+ addr="0x01000008"
+ length="0x00100000"
+
+ case "$2" in
+ fat)
+ PREFIX="fat"
+ WRITE="write"
+ ;;
+
+ ext4)
+ PREFIX="ext4"
+ WRITE="write"
+ ;;
+
+ *)
+ echo "Unhandled filesystem $2. Exiting!"
+ exit
+ ;;
+ esac
+
+ case "$5" in
+ fs)
+ PREFIX=""
+ WRITE="save"
+ SUFFIX=" 0:0"
+ ;;
+
+ nonfs)
+ SUFFIX=" 0:0"
+ ;;
+
+ sb)
+ PREFIX="sb "
+ WRITE="save"
+ SUFFIX="fs -"
+ ;;
+
+ *)
+ echo "Unhandled mode $5. Exiting!"
+ exit
+ ;;
+
+ esac
+
+ if [ -z "$6" ]; then
+ FILE_WRITE=`fname_for_write $2 $3`
+ FILE_SMALL=$3
+ FILE_BIG=$4
+ else
+ FILE_WRITE=$6/`fname_for_write $2 $3`
+ FILE_SMALL=$6/$3
+ FILE_BIG=$6/$4
+ fi
+
+ # In u-boot commands, <interface> stands for host or hostfs
+ # hostfs maps to the host fs.
+ # host maps to the "sb bind" that we do
+
+ $UBOOT << EOF
+sb=$5
+setenv bind 'if test "\$sb" != sb; then sb bind 0 "$1"; fi'
+run bind
+# Test Case 1 - ls
+${PREFIX}ls host${SUFFIX} $6
+#
+# We want ${PREFIX}size host 0:0 $3 for host commands and
+# sb size hostfs - $3 for hostfs commands.
+# 1MB is 0x0010 0000
+# Test Case 2 - size of small file
+${PREFIX}size host${SUFFIX} $FILE_SMALL
+printenv filesize
+setenv filesize
+
+# 2.5GB (1024*1024*2500) is 0x9C40 0000
+# Test Case 3 - size of big file
+${PREFIX}size host${SUFFIX} $FILE_BIG
+printenv filesize
+setenv filesize
+
+# Notes about load operation
+# If I use 0x01000000 I get DMA misaligned error message
+# Last two parameters are size and offset.
+
+# Test Case 4a - Read full 1MB of small file
+${PREFIX}load host${SUFFIX} $addr $FILE_SMALL
+printenv filesize
+# Test Case 4b - Read full 1MB of small file
+md5sum $addr \$filesize
+setenv filesize
+
+# Test Case 5a - First 1MB of big file
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x0
+printenv filesize
+# Test Case 5b - First 1MB of big file
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 6a - Last 1MB of big file
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x9C300000
+printenv filesize
+# Test Case 6b - Last 1MB of big file
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 7a - One from the last 1MB chunk of 2GB
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x7FF00000
+printenv filesize
+# Test Case 7b - One from the last 1MB chunk of 2GB
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 8a - One from the start 1MB chunk from 2GB
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x80000000
+printenv filesize
+# Test Case 8b - One from the start 1MB chunk from 2GB
+md5sum $addr \$filesize
+setenv filesize
+
+# fails for ext as no offset support
+# Test Case 9a - One 1MB chunk crossing the 2GB boundary
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG $length 0x7FF80000
+printenv filesize
+# Test Case 9b - One 1MB chunk crossing the 2GB boundary
+md5sum $addr \$filesize
+setenv filesize
+
+# Generic failure case
+# Test Case 10 - 2MB chunk from the last 1MB of big file
+${PREFIX}load host${SUFFIX} $addr $FILE_BIG 0x00200000 0x9C300000
+printenv filesize
+#
+
+# Read 1MB from small file
+${PREFIX}load host${SUFFIX} $addr $FILE_SMALL
+# Write it back to test the writes
+# Test Case 11a - Check that the write succeeded
+${PREFIX}${WRITE} host${SUFFIX} $addr $FILE_WRITE \$filesize
+mw.b $addr 00 100
+${PREFIX}load host${SUFFIX} $addr $FILE_WRITE
+# Test Case 11b - Check md5 of written to is same as the one read from
+md5sum $addr \$filesize
+setenv filesize
+#
+reset
+
+EOF
+}
+
+# 1st argument is the name of the image file.
+# 2nd argument is the file where we generate the md5s of the files
+# generated with the appropriate start and length that we use to test.
+# It creates the necessary files in the image to test.
+# $GB2p5 is the path of the big file (2.5 GB)
+# $MB1 is the path of the small file (1 MB)
+# $MOUNT_DIR is the path we can use to mount the image file.
+function create_files() {
+ # Mount the image so we can populate it.
+ mkdir -p "$MOUNT_DIR"
+ sudo mount -o loop,rw "$1" "$MOUNT_DIR"
+
+ # Create big file in this image.
+ # Note that we work only on the start 1MB, couple MBs in the 2GB range
+ # and the last 1 MB of the huge 2.5GB file.
+ # So, just put random values only in those areas.
+ if [ ! -f "${GB2p5}" ]; then
+ sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 \
+ &> /dev/null
+ sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=2 seek=2047 \
+ &> /dev/null
+ sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 seek=2499 \
+ &> /dev/null
+ fi
+
+ # Create a small file in this image.
+ if [ ! -f "${MB1}" ]; then
+ sudo dd if=/dev/urandom of="${MB1}" bs=1M count=1 \
+ &> /dev/null
+ fi
+
+ # Delete the small file which possibly is written as part of a
+ # previous test.
+ sudo rm -f "${MB1}.w"
+
+ # Generate the md5sums of reads that we will test against small file
+ dd if="${MB1}" bs=1M skip=0 count=1 2> /dev/null | md5sum > "$2"
+
+ # Generate the md5sums of reads that we will test against big file
+ # One from beginning of file.
+ dd if="${GB2p5}" bs=1M skip=0 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One from end of file.
+ dd if="${GB2p5}" bs=1M skip=2499 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One from the last 1MB chunk of 2GB
+ dd if="${GB2p5}" bs=1M skip=2047 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One from the start 1MB chunk from 2GB
+ dd if="${GB2p5}" bs=1M skip=2048 count=1 \
+ 2> /dev/null | md5sum >> "$2"
+
+ # One 1MB chunk crossing the 2GB boundary
+ dd if="${GB2p5}" bs=512K skip=4095 count=2 \
+ 2> /dev/null | md5sum >> "$2"
+
+ sync
+ sudo umount "$MOUNT_DIR"
+ rmdir "$MOUNT_DIR"
+}
+
+# 1st parameter is the text to print
+# if $? is 0 its a pass, else a fail
+# As a side effect it shall update env variable PASS and FAIL
+function pass_fail() {
+ if [ $? -eq 0 ]; then
+ echo pass - "$1"
+ PASS=$((PASS + 1))
+ else
+ echo FAIL - "$1"
+ FAIL=$((FAIL + 1))
+ fi
+}
+
+# 1st parameter is the string which leads to an md5 generation
+# 2nd parameter is the file we grep, for that string
+# 3rd parameter is the name of the file which has md5s in it
+# 4th parameter is the line # in the md5 file that we match it against
+# This function checks if the md5 of the file in the sandbox matches
+# that calculated while generating the file
+# 5th parameter is the string to print with the result
+check_md5() {
+ # md5sum in u-boot has output of form:
+ # md5 for 01000008 ... 01100007 ==> <md5>
+ # the 7th field is the actual md5
+ md5_src=`grep -A3 "$1" "$2" | grep "md5 for"`
+ md5_src=($md5_src)
+ md5_src=${md5_src[6]}
+
+ # The md5 list, each line is of the form:
+ # - <md5>
+ # the 2nd field is the actual md5
+ md5_dst=`sed -n $4p $3`
+ md5_dst=($md5_dst)
+ md5_dst=${md5_dst[0]}
+
+ # For a pass they should match.
+ [ "$md5_src" = "$md5_dst" ]
+ pass_fail "$5"
+}
+
+# 1st parameter is the name of the output file to check
+# 2nd parameter is the name of the file containing the md5 expected
+# 3rd parameter is the name of the small file
+# 4th parameter is the name of the big file
+# 5th paramter is the name of the written file
+# This function checks the output file for correct results.
+function check_results() {
+ echo "** Start $1"
+
+ PASS=0
+ FAIL=0
+
+ # Check if the ls is showing correct results for 2.5 gb file
+ grep -A6 "Test Case 1 " "$1" | egrep -iq "2621440000 *$4"
+ pass_fail "TC1: ls of $4"
+
+ # Check if the ls is showing correct results for 1 mb file
+ grep -A6 "Test Case 1 " "$1" | egrep -iq "1048576 *$3"
+ pass_fail "TC1: ls of $3"
+
+ # Check size command on 1MB.file
+ egrep -A3 "Test Case 2 " "$1" | grep -q "filesize=100000"
+ pass_fail "TC2: size of $3"
+
+ # Check size command on 2.5GB.file
+ egrep -A3 "Test Case 3 " "$1" | grep -q "filesize=9c400000"
+ pass_fail "TC3: size of $4"
+
+ # Check read full mb of 1MB.file
+ grep -A6 "Test Case 4a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC4: load of $3 size"
+ check_md5 "Test Case 4b " "$1" "$2" 1 "TC4: load from $3"
+
+ # Check first mb of 2.5GB.file
+ grep -A6 "Test Case 5a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC5: load of 1st MB from $4 size"
+ check_md5 "Test Case 5b " "$1" "$2" 2 "TC5: load of 1st MB from $4"
+
+ # Check last mb of 2.5GB.file
+ grep -A6 "Test Case 6a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC6: load of last MB from $4 size"
+ check_md5 "Test Case 6b " "$1" "$2" 3 "TC6: load of last MB from $4"
+
+ # Check last 1mb chunk of 2gb from 2.5GB file
+ grep -A6 "Test Case 7a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC7: load of last 1mb chunk of 2GB from $4 size"
+ check_md5 "Test Case 7b " "$1" "$2" 4 \
+ "TC7: load of last 1mb chunk of 2GB from $4"
+
+ # Check first 1mb chunk after 2gb from 2.5GB file
+ grep -A6 "Test Case 8a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC8: load 1st MB chunk after 2GB from $4 size"
+ check_md5 "Test Case 8b " "$1" "$2" 5 \
+ "TC8: load 1st MB chunk after 2GB from $4"
+
+ # Check 1mb chunk crossing the 2gb boundary from 2.5GB file
+ grep -A6 "Test Case 9a " "$1" | grep -q "filesize=100000"
+ pass_fail "TC9: load 1MB chunk crossing 2GB boundary from $4 size"
+ check_md5 "Test Case 9b " "$1" "$2" 6 \
+ "TC9: load 1MB chunk crossing 2GB boundary from $4"
+
+ # Check 2mb chunk from the last 1MB of 2.5GB file - generic failure case
+ grep -A6 "Test Case 10 " "$1" | grep -q 'Error: "filesize" not defined'
+ pass_fail "TC10: load 2MB from the last 1MB of $4 - generic fail case"
+
+ # Check 1mb chunk write
+ grep -A3 "Test Case 11a " "$1" | \
+ egrep -q '1048576 bytes written|update journal'
+ pass_fail "TC11: 1MB write to $5 - write succeeded"
+ check_md5 "Test Case 11b " "$1" "$2" 1 \
+ "TC11: 1MB write to $5 - content verified"
+ echo "** End $1"
+}
+
+# Takes in one parameter which is "fs" or "nonfs", which then dictates
+# if a fs test (size/load/save) or a nonfs test (fatread/extread) needs to
+# be performed.
+function test_fs_nonfs() {
+ echo "Creating files in $fs image if not already present."
+ create_files $IMAGE $MD5_FILE_FS
+
+ OUT_FILE="${OUT}.fs.${fs}.out"
+ test_image $IMAGE $fs $SMALL_FILE $BIG_FILE $1 "" \
+ > ${OUT_FILE}
+ check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE \
+ $WRITE_FILE
+ TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
+ TOTAL_PASS=$((TOTAL_PASS + PASS))
+ echo "Summary: PASS: $PASS FAIL: $FAIL"
+ echo "--------------------------------------------"
+}
+
+# ********************
+# * End of functions *
+# ********************
+
+check_clean "$1"
+check_prereq
+compile_sandbox
+prepare_env
+
+# Track TOTAL_FAIL and TOTAL_PASS
+TOTAL_FAIL=0
+TOTAL_PASS=0
+
+# In each loop, for a given file system image, we test both the
+# fs command, like load/size/write, the file system specific command
+# like: ext4load/ext4size/ext4write and the sb load/ls/save commands.
+for fs in ext4 fat; do
+
+ echo "Creating $fs image if not already present."
+ IMAGE=${IMG}.${fs}.img
+ MD5_FILE_FS="${MD5_FILE}.${fs}"
+ create_image $IMAGE $fs
+
+ # sb commands test
+ echo "Creating files in $fs image if not already present."
+ create_files $IMAGE $MD5_FILE_FS
+
+ # Lets mount the image and test sb hostfs commands
+ mkdir -p "$MOUNT_DIR"
+ if [ "$fs" = "fat" ]; then
+ uid="uid=`id -u`"
+ else
+ uid=""
+ fi
+ sudo mount -o loop,rw,$uid "$IMAGE" "$MOUNT_DIR"
+ sudo chmod 777 "$MOUNT_DIR"
+
+ OUT_FILE="${OUT}.sb.${fs}.out"
+ test_image $IMAGE $fs $SMALL_FILE $BIG_FILE sb `pwd`/$MOUNT_DIR \
+ > ${OUT_FILE}
+ sudo umount "$MOUNT_DIR"
+ rmdir "$MOUNT_DIR"
+
+ check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE \
+ $WRITE_FILE
+ TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
+ TOTAL_PASS=$((TOTAL_PASS + PASS))
+ echo "Summary: PASS: $PASS FAIL: $FAIL"
+ echo "--------------------------------------------"
+
+ test_fs_nonfs nonfs
+ test_fs_nonfs fs
+done
+
+echo "Total Summary: TOTAL PASS: $TOTAL_PASS TOTAL FAIL: $TOTAL_FAIL"
+echo "--------------------------------------------"
+if [ $TOTAL_FAIL -eq 0 ]; then
+ echo "PASSED"
+ exit 0
+else
+ echo "FAILED"
+ exit 1
+fi
projects / u-boot / commitdiff