/* turn off L2 cache */
l2_cache_disable();
/* invalidate L2 cache also */
- v7_flush_dcache_all(get_device_type());
+ invalidate_dcache(get_device_type());
#endif
i = 0;
/* mem barrier to sync up things */
LIB = $(obj)lib$(SOC).a
SOBJS := lowlevel_init.o
+SOBJS += cache.o
SOBJS += reset.o
COBJS += board.o
-COBJS += cache.o
COBJS += clock.o
COBJS += gpio.o
COBJS += mem.o
* Right now flushing at low MPU speed.
* Need to move after clock init
*/
- v7_flush_dcache_all(get_device_type());
+ invalidate_dcache(get_device_type());
#ifndef CONFIG_ICACHE_OFF
icache_enable();
#endif
--- /dev/null
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This file is based on and replaces the existing cache.c file
+ * The copyrights for the cache.c file are:
+ *
+ * (C) Copyright 2008 Texas Insturments
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/omap3.h>
+
+/*
+ * omap3 cache code
+ */
+
+.align 5
+.global invalidate_dcache
+.global l2_cache_enable
+.global l2_cache_disable
+
+/*
+ * invalidate_dcache()
+ *
+ * Invalidate the whole D-cache.
+ *
+ * Corrupted registers: r0-r5, r7, r9-r11
+ *
+ * - mm - mm_struct describing address space
+ */
+invalidate_dcache:
+ stmfd r13!, {r0 - r5, r7, r9 - r12, r14}
+
+ mov r7, r0 @ take a backup of device type
+ cmp r0, #0x3 @ check if the device type is
+ @ GP
+ moveq r12, #0x1 @ set up to invalide L2
+smi: .word 0x01600070 @ Call SMI monitor (smieq)
+ cmp r7, #0x3 @ compare again in case its
+ @ lost
+ beq finished_inval @ if GP device, inval done
+ @ above
+
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+ beq finished_inval @ if loc is 0, then no need to
+ @ clean
+ mov r10, #0 @ start clean at cache level 0
+inval_loop1:
+ add r2, r10, r10, lsr #1 @ work out 3x current cache
+ @ level
+ mov r1, r0, lsr r2 @ extract cache type bits from
+ @ clidr
+ and r1, r1, #7 @ mask of the bits for current
+ @ cache only
+ cmp r1, #2 @ see what cache we have at
+ @ this level
+ blt skip_inval @ skip if no cache, or just
+ @ i-cache
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level
+ @ in cssr
+ mov r2, #0 @ operand for mcr SBZ
+ mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to
+ @ sych the new cssr&csidr,
+ @ with armv7 this is 'isb',
+ @ but we compile with armv5
+ mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+ and r2, r1, #7 @ extract the length of the
+ @ cache lines
+ add r2, r2, #4 @ add 4 (line length offset)
+ ldr r4, =0x3ff
+ ands r4, r4, r1, lsr #3 @ find maximum number on the
+ @ way size
+ clz r5, r4 @ find bit position of way
+ @ size increment
+ ldr r7, =0x7fff
+ ands r7, r7, r1, lsr #13 @ extract max number of the
+ @ index size
+inval_loop2:
+ mov r9, r4 @ create working copy of max
+ @ way size
+inval_loop3:
+ orr r11, r10, r9, lsl r5 @ factor way and cache number
+ @ into r11
+ orr r11, r11, r7, lsl r2 @ factor index number into r11
+ mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way
+ subs r9, r9, #1 @ decrement the way
+ bge inval_loop3
+ subs r7, r7, #1 @ decrement the index
+ bge inval_loop2
+skip_inval:
+ add r10, r10, #2 @ increment cache number
+ cmp r3, r10
+ bgt inval_loop1
+finished_inval:
+ mov r10, #0 @ swith back to cache level 0
+ mcr p15, 2, r10, c0, c0, 0 @ select current cache level
+ @ in cssr
+ mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer,
+ @ with armv7 this is 'isb',
+ @ but we compile with armv5
+
+ ldmfd r13!, {r0 - r5, r7, r9 - r12, pc}
+
+
+l2_cache_enable:
+ push {r0, r1, r2, lr}
+ @ ES2 onwards we can disable/enable L2 ourselves
+ bl get_cpu_rev
+ cmp r0, #CPU_3XX_ES20
+ blt l2_cache_disable_EARLIER_THAN_ES2
+ mrc 15, 0, r3, cr1, cr0, 1
+ orr r3, r3, #2
+ mcr 15, 0, r3, cr1, cr0, 1
+ b l2_cache_enable_END
+l2_cache_enable_EARLIER_THAN_ES2:
+ @ Save r0, r12 and restore them after usage
+ mov r3, ip
+ str r3, [sp, #4]
+ mov r3, r0
+ @
+ @ GP Device ROM code API usage here
+ @ r12 = AUXCR Write function and r0 value
+ @
+ mov ip, #3
+ mrc 15, 0, r0, cr1, cr0, 1
+ orr r0, r0, #2
+ @ SMI instruction to call ROM Code API
+ .word 0xe1600070
+ mov r0, r3
+ mov ip, r3
+ str r3, [sp, #4]
+l2_cache_enable_END:
+ pop {r1, r2, r3, pc}
+
+
+l2_cache_disable:
+ push {r0, r1, r2, lr}
+ @ ES2 onwards we can disable/enable L2 ourselves
+ bl get_cpu_rev
+ cmp r0, #CPU_3XX_ES20
+ blt l2_cache_disable_EARLIER_THAN_ES2
+ mrc 15, 0, r3, cr1, cr0, 1
+ bic r3, r3, #2
+ mcr 15, 0, r3, cr1, cr0, 1
+ b l2_cache_disable_END
+l2_cache_disable_EARLIER_THAN_ES2:
+ @ Save r0, r12 and restore them after usage
+ mov r3, ip
+ str r3, [sp, #4]
+ mov r3, r0
+ @
+ @ GP Device ROM code API usage here
+ @ r12 = AUXCR Write function and r0 value
+ @
+ mov ip, #3
+ mrc 15, 0, r0, cr1, cr0, 1
+ bic r0, r0, #2
+ @ SMI instruction to call ROM Code API
+ .word 0xe1600070
+ mov r0, r3
+ mov ip, r3
+ str r3, [sp, #4]
+l2_cache_disable_END:
+ pop {r1, r2, r3, pc}
+++ /dev/null
-/*
- * (C) Copyright 2008 Texas Insturments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * omap3 L2 cache code
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/cache.h>
-
-void l2_cache_enable(void)
-{
- unsigned long i;
- volatile unsigned int j;
-
- /* ES2 onwards we can disable/enable L2 ourselves */
- if (get_cpu_rev() >= CPU_3XX_ES20) {
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
- __asm__ __volatile__("orr %0, %0, #0x2":"=r"(i));
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
- } else {
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- __asm__ __volatile__("orr r0, r0, #0x2");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
- }
-
-}
-
-void l2_cache_disable(void)
-{
- unsigned long i;
- volatile unsigned int j;
-
- /* ES2 onwards we can disable/enable L2 ourselves */
- if (get_cpu_rev() >= CPU_3XX_ES20) {
- __asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
- __asm__ __volatile__("bic %0, %0, #0x2":"=r"(i));
- __asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
- } else {
- /* Save r0, r12 and restore them after usage */
- __asm__ __volatile__("mov %0, r12":"=r"(j));
- __asm__ __volatile__("mov %0, r0":"=r"(i));
-
- /*
- * GP Device ROM code API usage here
- * r12 = AUXCR Write function and r0 value
- */
- __asm__ __volatile__("mov r12, #0x3");
- __asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
- __asm__ __volatile__("bic r0, r0, #0x2");
- /* SMI instruction to call ROM Code API */
- __asm__ __volatile__(".word 0xE1600070");
- __asm__ __volatile__("mov r0, %0":"=r"(i));
- __asm__ __volatile__("mov r12, %0":"=r"(j));
- }
-}
#endif
-/*
- * v7_flush_dcache_all()
- *
- * Flush the whole D-cache.
- *
- * Corrupted registers: r0-r5, r7, r9-r11
- *
- * - mm - mm_struct describing address space
- */
- .align 5
-.global v7_flush_dcache_all
-v7_flush_dcache_all:
- stmfd r13!, {r0 - r5, r7, r9 - r12, r14}
-
- mov r7, r0 @ take a backup of device type
- cmp r0, #0x3 @ check if the device type is
- @ GP
- moveq r12, #0x1 @ set up to invalide L2
-smi: .word 0x01600070 @ Call SMI monitor (smieq)
- cmp r7, #0x3 @ compare again in case its
- @ lost
- beq finished_inval @ if GP device, inval done
- @ above
-
- mrc p15, 1, r0, c0, c0, 1 @ read clidr
- ands r3, r0, #0x7000000 @ extract loc from clidr
- mov r3, r3, lsr #23 @ left align loc bit field
- beq finished_inval @ if loc is 0, then no need to
- @ clean
- mov r10, #0 @ start clean at cache level 0
-inval_loop1:
- add r2, r10, r10, lsr #1 @ work out 3x current cache
- @ level
- mov r1, r0, lsr r2 @ extract cache type bits from
- @ clidr
- and r1, r1, #7 @ mask of the bits for current
- @ cache only
- cmp r1, #2 @ see what cache we have at
- @ this level
- blt skip_inval @ skip if no cache, or just
- @ i-cache
- mcr p15, 2, r10, c0, c0, 0 @ select current cache level
- @ in cssr
- mov r2, #0 @ operand for mcr SBZ
- mcr p15, 0, r2, c7, c5, 4 @ flush prefetch buffer to
- @ sych the new cssr&csidr,
- @ with armv7 this is 'isb',
- @ but we compile with armv5
- mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
- and r2, r1, #7 @ extract the length of the
- @ cache lines
- add r2, r2, #4 @ add 4 (line length offset)
- ldr r4, =0x3ff
- ands r4, r4, r1, lsr #3 @ find maximum number on the
- @ way size
- clz r5, r4 @ find bit position of way
- @ size increment
- ldr r7, =0x7fff
- ands r7, r7, r1, lsr #13 @ extract max number of the
- @ index size
-inval_loop2:
- mov r9, r4 @ create working copy of max
- @ way size
-inval_loop3:
- orr r11, r10, r9, lsl r5 @ factor way and cache number
- @ into r11
- orr r11, r11, r7, lsl r2 @ factor index number into r11
- mcr p15, 0, r11, c7, c6, 2 @ invalidate by set/way
- subs r9, r9, #1 @ decrement the way
- bge inval_loop3
- subs r7, r7, #1 @ decrement the index
- bge inval_loop2
-skip_inval:
- add r10, r10, #2 @ increment cache number
- cmp r3, r10
- bgt inval_loop1
-finished_inval:
- mov r10, #0 @ swith back to cache level 0
- mcr p15, 2, r10, c0, c0, 0 @ select current cache level
- @ in cssr
- mcr p15, 0, r10, c7, c5, 4 @ flush prefetch buffer,
- @ with armv7 this is 'isb',
- @ but we compile with armv5
-
- ldmfd r13!, {r0 - r5, r7, r9 - r12, pc}
* ES1 = rev 0
*
* ES2 onwards, the value maps to contents of IDCODE register [31:28].
+ *
+ * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing.
*/
#define CPU_3XX_ES10 0
#define CPU_3XX_ES20 1
void setup_auxcr(void);
void try_unlock_memory(void);
u32 get_boot_type(void);
-void v7_flush_dcache_all(u32);
+void invalidate_dcache(u32);
void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
projects / u-boot / commitdiff