source "board/compulab/cm_t54/Kconfig"
source "board/ti/omap5_uevm/Kconfig"
source "board/ti/dra7xx/Kconfig"
-source "board/ti/beagle_x15/Kconfig"
+source "board/ti/am57xx/Kconfig"
endif
--- /dev/null
+if TARGET_BEAGLE_X15
+
+config SYS_BOARD
+ default "am57xx"
+
+config SYS_VENDOR
+ default "ti"
+
+config SYS_CONFIG_NAME
+ default "am57xx_evm"
+
+endif
--- /dev/null
+AM57XX EVM
+M: Felipe Balbi <balbi@ti.com>
+S: Maintained
+F: board/ti/am57xx/
+F: include/configs/am57xx_evm.h
+F: configs/am57xx_evm_defconfig
+F: configs/am57xx_evm_nodt_defconfig
--- /dev/null
+#
+# (C) Copyright 2014
+# Texas Instruments, <www.ti.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := board.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <palmas.h>
+#include <sata.h>
+#include <usb.h>
+#include <asm/omap_common.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/dra7xx_iodelay.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/omap.h>
+#include <environment.h>
+#include <usb.h>
+#include <linux/usb/gadget.h>
+#include <dwc3-uboot.h>
+#include <dwc3-omap-uboot.h>
+#include <ti-usb-phy-uboot.h>
+
+#include "mux_data.h"
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+#include <cpsw.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* GPIO 7_11 */
+#define GPIO_DDR_VTT_EN 203
+
+const struct omap_sysinfo sysinfo = {
+ "Board: BeagleBoard x15\n"
+};
+
+static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
+ .dmm_lisa_map_3 = 0x80740300,
+ .is_ma_present = 0x1
+};
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+{
+ *dmm_lisa_regs = &beagle_x15_lisa_regs;
+}
+
+static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
+ .sdram_config_init = 0x61851b32,
+ .sdram_config = 0x61851b32,
+ .sdram_config2 = 0x00000000,
+ .ref_ctrl = 0x000040F1,
+ .ref_ctrl_final = 0x00001035,
+ .sdram_tim1 = 0xceef266b,
+ .sdram_tim2 = 0x328f7fda,
+ .sdram_tim3 = 0x027f88a8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190b,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400b,
+ .emif_ddr_phy_ctlr_1 = 0x0e24400b,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00740074,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00780078,
+ .emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
+ .emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
+/* Ext phy ctrl regs 1-35 */
+static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
+ 0x10040100,
+ 0x00740074,
+ 0x00780078,
+ 0x007c007c,
+ 0x007b007b,
+ 0x00800080,
+ 0x00360036,
+ 0x00340034,
+ 0x00360036,
+ 0x00350035,
+ 0x00350035,
+
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+
+ 0x00430043,
+ 0x003e003e,
+ 0x004a004a,
+ 0x00470047,
+ 0x00400040,
+
+ 0x00000000,
+ 0x00600020,
+ 0x40011080,
+ 0x08102040,
+
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
+};
+
+static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
+ .sdram_config_init = 0x61851b32,
+ .sdram_config = 0x61851b32,
+ .sdram_config2 = 0x00000000,
+ .ref_ctrl = 0x000040F1,
+ .ref_ctrl_final = 0x00001035,
+ .sdram_tim1 = 0xceef266b,
+ .sdram_tim2 = 0x328f7fda,
+ .sdram_tim3 = 0x027f88a8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190b,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0024400b,
+ .emif_ddr_phy_ctlr_1 = 0x0e24400b,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00820082,
+ .emif_ddr_ext_phy_ctrl_3 = 0x008b008b,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00800080,
+ .emif_ddr_ext_phy_ctrl_5 = 0x007e007e,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
+static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
+ 0x10040100,
+ 0x00820082,
+ 0x008b008b,
+ 0x00800080,
+ 0x007e007e,
+ 0x00800080,
+ 0x00370037,
+ 0x00390039,
+ 0x00360036,
+ 0x00370037,
+ 0x00350035,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x00540054,
+ 0x00540054,
+ 0x004e004e,
+ 0x004c004c,
+ 0x00400040,
+
+ 0x00000000,
+ 0x00600020,
+ 0x40011080,
+ 0x08102040,
+
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0,
+ 0x0
+};
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+ switch (emif_nr) {
+ case 1:
+ *regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
+ break;
+ case 2:
+ *regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
+ break;
+ }
+}
+
+void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
+{
+ switch (emif_nr) {
+ case 1:
+ *regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
+ *size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
+ break;
+ case 2:
+ *regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
+ *size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
+ break;
+ }
+}
+
+struct vcores_data beagle_x15_volts = {
+ .mpu.value = VDD_MPU_DRA752,
+ .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS659038_REG_ADDR_SMPS12,
+ .mpu.pmic = &tps659038,
+
+ .eve.value = VDD_EVE_DRA752,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS659038_REG_ADDR_SMPS45,
+ .eve.pmic = &tps659038,
+
+ .gpu.value = VDD_GPU_DRA752,
+ .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS659038_REG_ADDR_SMPS45,
+ .gpu.pmic = &tps659038,
+
+ .core.value = VDD_CORE_DRA752,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS659038_REG_ADDR_SMPS6,
+ .core.pmic = &tps659038,
+
+ .iva.value = VDD_IVA_DRA752,
+ .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS659038_REG_ADDR_SMPS45,
+ .iva.pmic = &tps659038,
+};
+
+void hw_data_init(void)
+{
+ *prcm = &dra7xx_prcm;
+ *dplls_data = &dra7xx_dplls;
+ *omap_vcores = &beagle_x15_volts;
+ *ctrl = &dra7xx_ctrl;
+}
+
+int board_init(void)
+{
+ gpmc_init();
+ gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ init_sata(0);
+ /*
+ * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
+ * This is the POWERHOLD-in-Low behavior.
+ */
+ palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
+ return 0;
+}
+
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux32((*ctrl)->control_padconf_core_base,
+ early_padconf, ARRAY_SIZE(early_padconf));
+}
+
+#ifdef CONFIG_IODELAY_RECALIBRATION
+void recalibrate_iodelay(void)
+{
+ __recalibrate_iodelay(core_padconf_array_essential,
+ ARRAY_SIZE(core_padconf_array_essential),
+ iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array));
+}
+#endif
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ env_init();
+ env_relocate_spec();
+ if (getenv_yesno("boot_os") != 1)
+ return 1;
+#endif
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_USB_DWC3
+static struct dwc3_device usb_otg_ss1 = {
+ .maximum_speed = USB_SPEED_SUPER,
+ .base = DRA7_USB_OTG_SS1_BASE,
+ .tx_fifo_resize = false,
+ .index = 0,
+};
+
+static struct dwc3_omap_device usb_otg_ss1_glue = {
+ .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
+ .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
+ .index = 0,
+};
+
+static struct ti_usb_phy_device usb_phy1_device = {
+ .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
+ .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
+ .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
+ .index = 0,
+};
+
+static struct dwc3_device usb_otg_ss2 = {
+ .maximum_speed = USB_SPEED_HIGH,
+ .base = DRA7_USB_OTG_SS2_BASE,
+ .tx_fifo_resize = false,
+ .index = 1,
+};
+
+static struct dwc3_omap_device usb_otg_ss2_glue = {
+ .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
+ .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
+ .index = 1,
+};
+
+static struct ti_usb_phy_device usb_phy2_device = {
+ .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
+ .index = 1,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ enable_usb_clocks(index);
+ switch (index) {
+ case 0:
+ if (init == USB_INIT_DEVICE) {
+ printf("port %d can't be used as device\n", index);
+ disable_usb_clocks(index);
+ return -EINVAL;
+ } else {
+ usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
+ usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
+ setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+ OTG_SS_CLKCTRL_MODULEMODE_HW |
+ OPTFCLKEN_REFCLK960M);
+ }
+
+ ti_usb_phy_uboot_init(&usb_phy1_device);
+ dwc3_omap_uboot_init(&usb_otg_ss1_glue);
+ dwc3_uboot_init(&usb_otg_ss1);
+ break;
+ case 1:
+ if (init == USB_INIT_DEVICE) {
+ usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
+ usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
+ } else {
+ printf("port %d can't be used as host\n", index);
+ disable_usb_clocks(index);
+ return -EINVAL;
+ }
+
+ ti_usb_phy_uboot_init(&usb_phy2_device);
+ dwc3_omap_uboot_init(&usb_otg_ss2_glue);
+ dwc3_uboot_init(&usb_otg_ss2);
+ break;
+ default:
+ printf("Invalid Controller Index\n");
+ }
+
+ return 0;
+}
+
+int board_usb_cleanup(int index, enum usb_init_type init)
+{
+ switch (index) {
+ case 0:
+ case 1:
+ ti_usb_phy_uboot_exit(index);
+ dwc3_uboot_exit(index);
+ dwc3_omap_uboot_exit(index);
+ break;
+ default:
+ printf("Invalid Controller Index\n");
+ }
+ disable_usb_clocks(index);
+ return 0;
+}
+
+int usb_gadget_handle_interrupts(int index)
+{
+ u32 status;
+
+ status = dwc3_omap_uboot_interrupt_status(index);
+ if (status)
+ dwc3_uboot_handle_interrupt(index);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+
+/* Delay value to add to calibrated value */
+#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8)
+#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8)
+#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2)
+#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0)
+#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0)
+#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8)
+#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8)
+#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2)
+#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
+#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
+
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 1,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_addr = 2,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ int ret;
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+ uint32_t ctrl_val;
+
+ /* try reading mac address from efuse */
+ mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
+ mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
+ mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = mac_hi & 0xFF;
+ mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+ mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+ mac_addr[5] = mac_lo & 0xFF;
+
+ if (!getenv("ethaddr")) {
+ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
+
+ if (is_valid_ethaddr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
+ mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
+ mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = mac_hi & 0xFF;
+ mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+ mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+ mac_addr[5] = mac_lo & 0xFF;
+
+ if (!getenv("eth1addr")) {
+ if (is_valid_ethaddr(mac_addr))
+ eth_setenv_enetaddr("eth1addr", mac_addr);
+ }
+
+ ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
+ ctrl_val |= 0x22;
+ writel(ctrl_val, (*ctrl)->control_core_control_io1);
+
+ ret = cpsw_register(&cpsw_data);
+ if (ret < 0)
+ printf("Error %d registering CPSW switch\n", ret);
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+/* VTT regulator enable */
+static inline void vtt_regulator_enable(void)
+{
+ if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+ return;
+
+ gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+ gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+}
+
+int board_early_init_f(void)
+{
+ vtt_regulator_enable();
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _MUX_DATA_BEAGLE_X15_H_
+#define _MUX_DATA_BEAGLE_X15_H_
+
+#include <asm/arch/mux_dra7xx.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+ {GPMC_AD0, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad0.vin3a_d0 */
+ {GPMC_AD1, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad1.vin3a_d1 */
+ {GPMC_AD2, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad2.vin3a_d2 */
+ {GPMC_AD3, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad3.vin3a_d3 */
+ {GPMC_AD4, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad4.vin3a_d4 */
+ {GPMC_AD5, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad5.vin3a_d5 */
+ {GPMC_AD6, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad6.vin3a_d6 */
+ {GPMC_AD7, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad7.vin3a_d7 */
+ {GPMC_AD8, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad8.vin3a_d8 */
+ {GPMC_AD9, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad9.vin3a_d9 */
+ {GPMC_AD10, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad10.vin3a_d10 */
+ {GPMC_AD11, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad11.vin3a_d11 */
+ {GPMC_AD12, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad12.vin3a_d12 */
+ {GPMC_AD13, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad13.vin3a_d13 */
+ {GPMC_AD14, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad14.vin3a_d14 */
+ {GPMC_AD15, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad15.vin3a_d15 */
+ {GPMC_A0, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a0.vin3a_d16 */
+ {GPMC_A1, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a1.vin3a_d17 */
+ {GPMC_A2, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a2.vin3a_d18 */
+ {GPMC_A3, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a3.vin3a_d19 */
+ {GPMC_A4, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a4.vin3a_d20 */
+ {GPMC_A5, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a5.vin3a_d21 */
+ {GPMC_A6, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a6.vin3a_d22 */
+ {GPMC_A7, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a7.vin3a_d23 */
+ {GPMC_A8, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a8.vin3a_hsync0 */
+ {GPMC_A9, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a9.vin3a_vsync0 */
+ {GPMC_A10, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a10.vin3a_de0 */
+ {GPMC_A11, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a11.vin3a_fld0 */
+ {GPMC_A12, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a12.gpio2_2 */
+ {GPMC_A13, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a13.gpio2_3 */
+ {GPMC_A14, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a14.gpio2_4 */
+ {GPMC_A15, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a15.gpio2_5 */
+ {GPMC_A16, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a16.gpio2_6 */
+ {GPMC_A17, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a17.gpio2_7 */
+ {GPMC_A18, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a18.gpio2_8 */
+ {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a19.mmc2_dat4 */
+ {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a20.mmc2_dat5 */
+ {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a21.mmc2_dat6 */
+ {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a22.mmc2_dat7 */
+ {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a23.mmc2_clk */
+ {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a24.mmc2_dat0 */
+ {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a25.mmc2_dat1 */
+ {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a26.mmc2_dat2 */
+ {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a27.mmc2_dat3 */
+ {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_cs1.mmc2_cmd */
+ {GPMC_CS0, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_cs0.gpio2_19 */
+ {GPMC_CS2, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_cs2.gpio2_20 */
+ {GPMC_CS3, (M2 | PIN_INPUT_PULLDOWN)}, /* gpmc_cs3.vin3a_clk0 */
+ {GPMC_CLK, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_clk.dma_evt1 */
+ {GPMC_ADVN_ALE, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_advn_ale.gpio2_23 */
+ {GPMC_OEN_REN, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_oen_ren.gpio2_24 */
+ {GPMC_WEN, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_wen.gpio2_25 */
+ {GPMC_BEN0, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_ben0.dma_evt3 */
+ {GPMC_BEN1, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_ben1.dma_evt4 */
+ {GPMC_WAIT0, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_wait0.gpio2_28 */
+ {VIN1B_CLK1, (M14 | PIN_INPUT_SLEW)}, /* vin1b_clk1.gpio2_31 */
+ {VIN1A_D2, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d2.gpio3_6 */
+ {VIN1A_D3, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d3.gpio3_7 */
+ {VIN1A_D4, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d4.gpio3_8 */
+ {VIN1A_D5, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d5.gpio3_9 */
+ {VIN1A_D6, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d6.gpio3_10 */
+ {VIN1A_D7, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d7.gpio3_11 */
+ {VIN1A_D8, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d8.gpio3_12 */
+ {VIN1A_D10, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d10.gpio3_14 */
+ {VIN1A_D11, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d11.gpio3_15 */
+ {VIN1A_D12, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d12.gpio3_16 */
+ {VIN1A_D14, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d14.gpio3_18 */
+ {VIN1A_D16, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d16.gpio3_20 */
+ {VIN1A_D19, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d19.gpio3_23 */
+ {VIN1A_D20, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d20.gpio3_24 */
+ {VIN1A_D21, (M0 | PIN_INPUT_PULLDOWN)}, /* vin1a_d21.vin1a_d21 */
+ {VIN1A_D22, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d22.gpio3_26 */
+ {VIN2A_CLK0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_clk0.gpio3_28 */
+ {VIN2A_DE0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_de0.gpio3_29 */
+ {VIN2A_FLD0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_fld0.gpio3_30 */
+ {VIN2A_HSYNC0, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_hsync0.pr1_uart0_cts_n */
+ {VIN2A_VSYNC0, (M11 | PIN_INPUT_PULLUP)}, /* vin2a_vsync0.pr1_uart0_rts_n */
+ {VIN2A_D0, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_d0.pr1_uart0_rxd */
+ {VIN2A_D1, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_d1.pr1_uart0_txd */
+ {VIN2A_D2, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d2.uart10_rxd */
+ {VIN2A_D3, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d3.uart10_txd */
+ {VIN2A_D4, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d4.uart10_ctsn */
+ {VIN2A_D5, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d5.uart10_rtsn */
+ {VIN2A_D6, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d6.gpio4_7 */
+ {VIN2A_D7, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d7.gpio4_8 */
+ {VIN2A_D8, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d8.gpio4_9 */
+ {VIN2A_D9, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d9.gpio4_10 */
+ {VIN2A_D10, (M10 | PIN_INPUT_PULLDOWN)}, /* vin2a_d10.ehrpwm2B */
+ {VIN2A_D11, (M10 | PIN_INPUT_PULLDOWN)}, /* vin2a_d11.ehrpwm2_tripzone_input */
+ {VIN2A_D12, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d12.rgmii1_txc */
+ {VIN2A_D13, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d13.rgmii1_txctl */
+ {VIN2A_D14, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d14.rgmii1_txd3 */
+ {VIN2A_D15, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d15.rgmii1_txd2 */
+ {VIN2A_D16, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d16.rgmii1_txd1 */
+ {VIN2A_D17, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d17.rgmii1_txd0 */
+ {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d18.rgmii1_rxc */
+ {VIN2A_D19, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d19.rgmii1_rxctl */
+ {VIN2A_D20, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d20.rgmii1_rxd3 */
+ {VIN2A_D21, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d21.rgmii1_rxd2 */
+ {VIN2A_D22, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d22.rgmii1_rxd1 */
+ {VIN2A_D23, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d23.rgmii1_rxd0 */
+ {VOUT1_CLK, (M0 | PIN_OUTPUT)}, /* vout1_clk.vout1_clk */
+ {VOUT1_DE, (M0 | PIN_OUTPUT)}, /* vout1_de.vout1_de */
+ {VOUT1_FLD, (M14 | PIN_INPUT)}, /* vout1_fld.gpio4_21 */
+ {VOUT1_HSYNC, (M0 | PIN_OUTPUT)}, /* vout1_hsync.vout1_hsync */
+ {VOUT1_VSYNC, (M0 | PIN_OUTPUT)}, /* vout1_vsync.vout1_vsync */
+ {VOUT1_D0, (M0 | PIN_OUTPUT)}, /* vout1_d0.vout1_d0 */
+ {VOUT1_D1, (M0 | PIN_OUTPUT)}, /* vout1_d1.vout1_d1 */
+ {VOUT1_D2, (M0 | PIN_OUTPUT)}, /* vout1_d2.vout1_d2 */
+ {VOUT1_D3, (M0 | PIN_OUTPUT)}, /* vout1_d3.vout1_d3 */
+ {VOUT1_D4, (M0 | PIN_OUTPUT)}, /* vout1_d4.vout1_d4 */
+ {VOUT1_D5, (M0 | PIN_OUTPUT)}, /* vout1_d5.vout1_d5 */
+ {VOUT1_D6, (M0 | PIN_OUTPUT)}, /* vout1_d6.vout1_d6 */
+ {VOUT1_D7, (M0 | PIN_OUTPUT)}, /* vout1_d7.vout1_d7 */
+ {VOUT1_D8, (M0 | PIN_OUTPUT)}, /* vout1_d8.vout1_d8 */
+ {VOUT1_D9, (M0 | PIN_OUTPUT)}, /* vout1_d9.vout1_d9 */
+ {VOUT1_D10, (M0 | PIN_OUTPUT)}, /* vout1_d10.vout1_d10 */
+ {VOUT1_D11, (M0 | PIN_OUTPUT)}, /* vout1_d11.vout1_d11 */
+ {VOUT1_D12, (M0 | PIN_OUTPUT)}, /* vout1_d12.vout1_d12 */
+ {VOUT1_D13, (M0 | PIN_OUTPUT)}, /* vout1_d13.vout1_d13 */
+ {VOUT1_D14, (M0 | PIN_OUTPUT)}, /* vout1_d14.vout1_d14 */
+ {VOUT1_D15, (M0 | PIN_OUTPUT)}, /* vout1_d15.vout1_d15 */
+ {VOUT1_D16, (M0 | PIN_OUTPUT)}, /* vout1_d16.vout1_d16 */
+ {VOUT1_D17, (M0 | PIN_OUTPUT)}, /* vout1_d17.vout1_d17 */
+ {VOUT1_D18, (M0 | PIN_OUTPUT)}, /* vout1_d18.vout1_d18 */
+ {VOUT1_D19, (M0 | PIN_OUTPUT)}, /* vout1_d19.vout1_d19 */
+ {VOUT1_D20, (M0 | PIN_OUTPUT)}, /* vout1_d20.vout1_d20 */
+ {VOUT1_D21, (M0 | PIN_OUTPUT)}, /* vout1_d21.vout1_d21 */
+ {VOUT1_D22, (M0 | PIN_OUTPUT)}, /* vout1_d22.vout1_d22 */
+ {VOUT1_D23, (M0 | PIN_OUTPUT)}, /* vout1_d23.vout1_d23 */
+ {MDIO_MCLK, (M0 | PIN_INPUT_PULLUP)}, /* mdio_mclk.mdio_mclk */
+ {MDIO_D, (M0 | PIN_INPUT_PULLUP)}, /* mdio_d.mdio_d */
+ {RMII_MHZ_50_CLK, (M14 | PIN_INPUT_PULLUP)}, /* RMII_MHZ_50_CLK.gpio5_17 */
+ {UART3_RXD, (M14 | PIN_INPUT_PULLDOWN)}, /* uart3_rxd.gpio5_18 */
+ {UART3_TXD, (M14 | PIN_INPUT_PULLDOWN)}, /* uart3_txd.gpio5_19 */
+ {RGMII0_TXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txc.rgmii0_txc */
+ {RGMII0_TXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txctl.rgmii0_txctl */
+ {RGMII0_TXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd3.rgmii0_txd3 */
+ {RGMII0_TXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd2.rgmii0_txd2 */
+ {RGMII0_TXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd1.rgmii0_txd1 */
+ {RGMII0_TXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd0.rgmii0_txd0 */
+ {RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxc.rgmii0_rxc */
+ {RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxctl.rgmii0_rxctl */
+ {RGMII0_RXD3, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd3.rgmii0_rxd3 */
+ {RGMII0_RXD2, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd2.rgmii0_rxd2 */
+ {RGMII0_RXD1, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd1.rgmii0_rxd1 */
+ {RGMII0_RXD0, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd0.rgmii0_rxd0 */
+ {USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb1_drvvbus.usb1_drvvbus */
+ {USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb2_drvvbus.usb2_drvvbus */
+ {GPIO6_14, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_14.timer1 */
+ {GPIO6_15, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_15.timer2 */
+ {GPIO6_16, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_16.timer3 */
+ {XREF_CLK0, (M9 | PIN_INPUT_PULLDOWN)}, /* xref_clk0.clkout2 */
+ {XREF_CLK1, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk1.gpio6_18 */
+ {XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.gpio6_19 */
+ {XREF_CLK3, (M9 | PIN_INPUT_PULLDOWN)}, /* xref_clk3.clkout3 */
+ {MCASP1_ACLKX, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkx.i2c3_sda */
+ {MCASP1_FSX, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_fsx.i2c3_scl */
+ {MCASP1_ACLKR, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkr.i2c4_sda */
+ {MCASP1_FSR, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_fsr.i2c4_scl */
+ {MCASP1_AXR0, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr0.i2c5_sda */
+ {MCASP1_AXR1, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr1.i2c5_scl */
+ {MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */
+ {MCASP1_AXR3, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr3.gpio5_5 */
+ {MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */
+ {MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */
+ {MCASP1_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr6.gpio5_8 */
+ {MCASP1_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr7.gpio5_9 */
+ {MCASP1_AXR8, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr8.gpio5_10 */
+ {MCASP1_AXR9, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr9.gpio5_11 */
+ {MCASP1_AXR10, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr10.gpio5_12 */
+ {MCASP1_AXR11, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr11.gpio4_17 */
+ {MCASP1_AXR12, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr12.mcasp7_axr0 */
+ {MCASP1_AXR13, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.mcasp7_axr1 */
+ {MCASP1_AXR14, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr14.mcasp7_aclkx */
+ {MCASP1_AXR15, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr15.mcasp7_fsx */
+ {MCASP2_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkx.mcasp2_aclkx */
+ {MCASP2_FSX, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_fsx.mcasp2_fsx */
+ {MCASP2_ACLKR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkr.mcasp2_aclkr */
+ {MCASP2_FSR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_fsr.mcasp2_fsr */
+ {MCASP2_AXR0, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr0.mcasp2_axr0 */
+ {MCASP2_AXR1, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr1.mcasp2_axr1 */
+ {MCASP2_AXR2, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_axr2.mcasp2_axr2 */
+ {MCASP2_AXR3, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_axr3.mcasp2_axr3 */
+ {MCASP2_AXR4, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr4.mcasp2_axr4 */
+ {MCASP2_AXR5, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr5.mcasp2_axr5 */
+ {MCASP2_AXR6, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr6.mcasp2_axr6 */
+ {MCASP2_AXR7, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr7.mcasp2_axr7 */
+ {MCASP3_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.mcasp3_aclkx */
+ {MCASP3_FSX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_fsx.mcasp3_fsx */
+ {MCASP3_AXR0, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_axr0.mcasp3_axr0 */
+ {MCASP3_AXR1, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_axr1.mcasp3_axr1 */
+ {MCASP4_ACLKX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_aclkx.uart8_rxd */
+ {MCASP4_FSX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_fsx.uart8_txd */
+ {MCASP4_AXR0, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_axr0.uart8_ctsn */
+ {MCASP4_AXR1, (M3 | PIN_INPUT_PULLUP)}, /* mcasp4_axr1.uart8_rtsn */
+ {MCASP5_ACLKX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_aclkx.uart9_rxd */
+ {MCASP5_FSX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_fsx.uart9_txd */
+ {MCASP5_AXR0, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_axr0.uart9_ctsn */
+ {MCASP5_AXR1, (M3 | PIN_INPUT_PULLUP)}, /* mcasp5_axr1.uart9_rtsn */
+ {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_clk.mmc1_clk */
+ {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_cmd.mmc1_cmd */
+ {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat0.mmc1_dat0 */
+ {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat1.mmc1_dat1 */
+ {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat2.mmc1_dat2 */
+ {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */
+ {MMC1_SDCD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_sdcd.mmc1_sdcd */
+ {MMC1_SDWP, (M14 | PIN_OUTPUT)}, /* mmc1_sdwp.gpio6_28 */
+ {GPIO6_10, (M10 | PIN_INPUT_PULLDOWN)}, /* gpio6_10.ehrpwm2A */
+ {GPIO6_11, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_11.gpio6_11 */
+ {MMC3_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_clk.mmc3_clk */
+ {MMC3_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_cmd.mmc3_cmd */
+ {MMC3_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat0.mmc3_dat0 */
+ {MMC3_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat1.mmc3_dat1 */
+ {MMC3_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat2.mmc3_dat2 */
+ {MMC3_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat3.mmc3_dat3 */
+ {MMC3_DAT4, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat4.spi4_sclk */
+ {MMC3_DAT5, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat5.spi4_d1 */
+ {MMC3_DAT6, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat6.spi4_d0 */
+ {MMC3_DAT7, (M1 | PIN_INPUT_PULLUP)}, /* mmc3_dat7.spi4_cs0 */
+ {SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.gpio7_7 */
+ {SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.gpio7_8 */
+ {SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.gpio7_9 */
+ {SPI1_CS0, (M14 | PIN_OUTPUT)}, /* spi1_cs0.gpio7_10 */
+ {SPI1_CS1, (M14 | PIN_OUTPUT_PULLUP)}, /* spi1_cs1.gpio7_11 */
+ {SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_cs2.gpio7_12 */
+ {SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi1_cs3.hdmi1_cec */
+ {SPI2_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi2_sclk.gpio7_14 */
+ {SPI2_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi2_d1.gpio7_15 */
+ {SPI2_D0, (M14 | PIN_INPUT_PULLUP)}, /* spi2_d0.gpio7_16 */
+ {SPI2_CS0, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi2_cs0.gpio7_17 */
+ {DCAN1_TX, (M15 | PULL_UP)}, /* dcan1_tx.safe for dcan1_tx */
+ {DCAN1_RX, (M15 | PULL_UP)}, /* dcan1_rx.safe for dcan1_rx */
+ {UART1_RXD, (M0 | PIN_INPUT_SLEW)}, /* uart1_rxd.uart1_rxd */
+ {UART1_TXD, (M0 | PIN_INPUT_SLEW)}, /* uart1_txd.uart1_txd */
+ {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* uart1_ctsn.Driveroff */
+ {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* N/A.Driveroff */
+ {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* uart2_txd.Driveroff */
+ {UART2_CTSN, (M2 | PIN_INPUT_SLEW)}, /* uart2_ctsn.uart3_rxd */
+ {UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */
+ {I2C2_SDA, (M1 | PIN_INPUT)}, /* i2c2_sda.hdmi1_ddc_scl */
+ {I2C2_SCL, (M1 | PIN_INPUT)}, /* i2c2_scl.hdmi1_ddc_sda */
+ {WAKEUP0, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup0.Wakeup0 */
+ {WAKEUP1, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup1.Wakeup1 */
+ {WAKEUP2, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup2.Wakeup2 */
+ {WAKEUP3, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup3.Wakeup3 */
+ {ON_OFF, (M1 | PIN_OUTPUT_PULLUP)}, /* on_off.on_off */
+ {RTC_PORZ, (M0 | PIN_OUTPUT_PULLDOWN)}, /* rtc_porz.rtc_porz */
+ {RTCK, (M0 | PIN_INPUT_PULLDOWN)}, /* rtck.rtck */
+};
+
+const struct pad_conf_entry early_padconf[] = {
+ {UART2_CTSN, (M2 | PIN_INPUT_SLEW)}, /* uart2_ctsn.uart3_rxd */
+ {UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */
+ {I2C1_SDA, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SDA */
+ {I2C1_SCL, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SCL */
+};
+
+#ifdef CONFIG_IODELAY_RECALIBRATION
+const struct iodelay_cfg_entry iodelay_cfg_array[] = {
+ {0x0114, 2980, 0}, /* CFG_GPMC_A0_IN */
+ {0x0120, 2648, 0}, /* CFG_GPMC_A10_IN */
+ {0x012C, 2918, 0}, /* CFG_GPMC_A11_IN */
+ {0x0198, 2917, 0}, /* CFG_GPMC_A1_IN */
+ {0x0204, 3156, 178}, /* CFG_GPMC_A2_IN */
+ {0x0210, 3109, 246}, /* CFG_GPMC_A3_IN */
+ {0x021C, 3142, 100}, /* CFG_GPMC_A4_IN */
+ {0x0228, 3084, 33}, /* CFG_GPMC_A5_IN */
+ {0x0234, 2778, 0}, /* CFG_GPMC_A6_IN */
+ {0x0240, 3110, 0}, /* CFG_GPMC_A7_IN */
+ {0x024C, 2874, 0}, /* CFG_GPMC_A8_IN */
+ {0x0258, 3072, 0}, /* CFG_GPMC_A9_IN */
+ {0x0264, 2466, 0}, /* CFG_GPMC_AD0_IN */
+ {0x0270, 2523, 0}, /* CFG_GPMC_AD10_IN */
+ {0x027C, 2453, 0}, /* CFG_GPMC_AD11_IN */
+ {0x0288, 2285, 0}, /* CFG_GPMC_AD12_IN */
+ {0x0294, 2206, 0}, /* CFG_GPMC_AD13_IN */
+ {0x02A0, 1898, 0}, /* CFG_GPMC_AD14_IN */
+ {0x02AC, 2473, 0}, /* CFG_GPMC_AD15_IN */
+ {0x02B8, 2307, 0}, /* CFG_GPMC_AD1_IN */
+ {0x02C4, 2691, 0}, /* CFG_GPMC_AD2_IN */
+ {0x02D0, 2384, 0}, /* CFG_GPMC_AD3_IN */
+ {0x02DC, 2462, 0}, /* CFG_GPMC_AD4_IN */
+ {0x02E8, 2335, 0}, /* CFG_GPMC_AD5_IN */
+ {0x02F4, 2370, 0}, /* CFG_GPMC_AD6_IN */
+ {0x0300, 2389, 0}, /* CFG_GPMC_AD7_IN */
+ {0x030C, 2672, 0}, /* CFG_GPMC_AD8_IN */
+ {0x0318, 2334, 0}, /* CFG_GPMC_AD9_IN */
+ {0x06F0, 480, 0}, /* CFG_RGMII0_RXC_IN */
+ {0x06FC, 111, 1641}, /* CFG_RGMII0_RXCTL_IN */
+ {0x0708, 272, 1116}, /* CFG_RGMII0_RXD0_IN */
+ {0x0714, 243, 1260}, /* CFG_RGMII0_RXD1_IN */
+ {0x0720, 0, 1614}, /* CFG_RGMII0_RXD2_IN */
+ {0x072C, 105, 1673}, /* CFG_RGMII0_RXD3_IN */
+ {0x0740, 531, 120}, /* CFG_RGMII0_TXC_OUT */
+ {0x074C, 11, 60}, /* CFG_RGMII0_TXCTL_OUT */
+ {0x0758, 7, 120}, /* CFG_RGMII0_TXD0_OUT */
+ {0x0764, 0, 0}, /* CFG_RGMII0_TXD1_OUT */
+ {0x0770, 276, 120}, /* CFG_RGMII0_TXD2_OUT */
+ {0x077C, 440, 120}, /* CFG_RGMII0_TXD3_OUT */
+ {0x0A70, 1551, 115}, /* CFG_VIN2A_D12_OUT */
+ {0x0A7C, 816, 0}, /* CFG_VIN2A_D13_OUT */
+ {0x0A88, 876, 0}, /* CFG_VIN2A_D14_OUT */
+ {0x0A94, 312, 0}, /* CFG_VIN2A_D15_OUT */
+ {0x0AA0, 58, 0}, /* CFG_VIN2A_D16_OUT */
+ {0x0AAC, 0, 0}, /* CFG_VIN2A_D17_OUT */
+ {0x0AB0, 702, 0}, /* CFG_VIN2A_D18_IN */
+ {0x0ABC, 136, 976}, /* CFG_VIN2A_D19_IN */
+ {0x0AD4, 210, 1357}, /* CFG_VIN2A_D20_IN */
+ {0x0AE0, 189, 1462}, /* CFG_VIN2A_D21_IN */
+ {0x0AEC, 232, 1278}, /* CFG_VIN2A_D22_IN */
+ {0x0AF8, 0, 1397}, /* CFG_VIN2A_D23_IN */
+};
+#endif
+#endif /* _MUX_DATA_BEAGLE_X15_H_ */
+++ /dev/null
-if TARGET_BEAGLE_X15
-
-config SYS_BOARD
- default "beagle_x15"
-
-config SYS_VENDOR
- default "ti"
-
-config SYS_CONFIG_NAME
- default "beagle_x15"
-
-endif
+++ /dev/null
-BEAGLE X15
-M: Felipe Balbi <balbi@ti.com>
-S: Maintained
-F: board/ti/beagle_x15/
-F: include/configs/beagle_x15.h
-F: configs/beagle_x15_defconfig
+++ /dev/null
-#
-# (C) Copyright 2014
-# Texas Instruments, <www.ti.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := board.o
+++ /dev/null
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
- *
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * Based on board/ti/dra7xx/evm.c
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <palmas.h>
-#include <sata.h>
-#include <usb.h>
-#include <asm/omap_common.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dra7xx_iodelay.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sata.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/omap.h>
-#include <environment.h>
-#include <usb.h>
-#include <linux/usb/gadget.h>
-#include <dwc3-uboot.h>
-#include <dwc3-omap-uboot.h>
-#include <ti-usb-phy-uboot.h>
-
-#include "mux_data.h"
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-#include <cpsw.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* GPIO 7_11 */
-#define GPIO_DDR_VTT_EN 203
-
-const struct omap_sysinfo sysinfo = {
- "Board: BeagleBoard x15\n"
-};
-
-static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
- .dmm_lisa_map_3 = 0x80740300,
- .is_ma_present = 0x1
-};
-
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
-{
- *dmm_lisa_regs = &beagle_x15_lisa_regs;
-}
-
-static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
- .sdram_config_init = 0x61851b32,
- .sdram_config = 0x61851b32,
- .sdram_config2 = 0x00000000,
- .ref_ctrl = 0x000040F1,
- .ref_ctrl_final = 0x00001035,
- .sdram_tim1 = 0xceef266b,
- .sdram_tim2 = 0x328f7fda,
- .sdram_tim3 = 0x027f88a8,
- .read_idle_ctrl = 0x00050000,
- .zq_config = 0x0007190b,
- .temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400b,
- .emif_ddr_phy_ctlr_1 = 0x0e24400b,
- .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00740074,
- .emif_ddr_ext_phy_ctrl_3 = 0x00780078,
- .emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
- .emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
- .emif_rd_wr_lvl_rmp_win = 0x00000000,
- .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
- .emif_rd_wr_lvl_ctl = 0x00000000,
- .emif_rd_wr_exec_thresh = 0x00000305
-};
-
-/* Ext phy ctrl regs 1-35 */
-static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
- 0x10040100,
- 0x00740074,
- 0x00780078,
- 0x007c007c,
- 0x007b007b,
- 0x00800080,
- 0x00360036,
- 0x00340034,
- 0x00360036,
- 0x00350035,
- 0x00350035,
-
- 0x01ff01ff,
- 0x01ff01ff,
- 0x01ff01ff,
- 0x01ff01ff,
- 0x01ff01ff,
-
- 0x00430043,
- 0x003e003e,
- 0x004a004a,
- 0x00470047,
- 0x00400040,
-
- 0x00000000,
- 0x00600020,
- 0x40011080,
- 0x08102040,
-
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x0,
- 0x0,
- 0x0,
- 0x0,
- 0x0
-};
-
-static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
- .sdram_config_init = 0x61851b32,
- .sdram_config = 0x61851b32,
- .sdram_config2 = 0x00000000,
- .ref_ctrl = 0x000040F1,
- .ref_ctrl_final = 0x00001035,
- .sdram_tim1 = 0xceef266b,
- .sdram_tim2 = 0x328f7fda,
- .sdram_tim3 = 0x027f88a8,
- .read_idle_ctrl = 0x00050000,
- .zq_config = 0x0007190b,
- .temp_alert_config = 0x00000000,
- .emif_ddr_phy_ctlr_1_init = 0x0024400b,
- .emif_ddr_phy_ctlr_1 = 0x0e24400b,
- .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
- .emif_ddr_ext_phy_ctrl_2 = 0x00820082,
- .emif_ddr_ext_phy_ctrl_3 = 0x008b008b,
- .emif_ddr_ext_phy_ctrl_4 = 0x00800080,
- .emif_ddr_ext_phy_ctrl_5 = 0x007e007e,
- .emif_rd_wr_lvl_rmp_win = 0x00000000,
- .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
- .emif_rd_wr_lvl_ctl = 0x00000000,
- .emif_rd_wr_exec_thresh = 0x00000305
-};
-
-static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
- 0x10040100,
- 0x00820082,
- 0x008b008b,
- 0x00800080,
- 0x007e007e,
- 0x00800080,
- 0x00370037,
- 0x00390039,
- 0x00360036,
- 0x00370037,
- 0x00350035,
- 0x01ff01ff,
- 0x01ff01ff,
- 0x01ff01ff,
- 0x01ff01ff,
- 0x01ff01ff,
- 0x00540054,
- 0x00540054,
- 0x004e004e,
- 0x004c004c,
- 0x00400040,
-
- 0x00000000,
- 0x00600020,
- 0x40011080,
- 0x08102040,
-
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x00400040,
- 0x0,
- 0x0,
- 0x0,
- 0x0,
- 0x0
-};
-
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
-{
- switch (emif_nr) {
- case 1:
- *regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
- break;
- case 2:
- *regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
- break;
- }
-}
-
-void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
-{
- switch (emif_nr) {
- case 1:
- *regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
- *size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
- break;
- case 2:
- *regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
- *size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
- break;
- }
-}
-
-struct vcores_data beagle_x15_volts = {
- .mpu.value = VDD_MPU_DRA752,
- .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
- .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .mpu.addr = TPS659038_REG_ADDR_SMPS12,
- .mpu.pmic = &tps659038,
-
- .eve.value = VDD_EVE_DRA752,
- .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
- .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .eve.addr = TPS659038_REG_ADDR_SMPS45,
- .eve.pmic = &tps659038,
-
- .gpu.value = VDD_GPU_DRA752,
- .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
- .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .gpu.addr = TPS659038_REG_ADDR_SMPS45,
- .gpu.pmic = &tps659038,
-
- .core.value = VDD_CORE_DRA752,
- .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
- .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .core.addr = TPS659038_REG_ADDR_SMPS6,
- .core.pmic = &tps659038,
-
- .iva.value = VDD_IVA_DRA752,
- .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
- .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .iva.addr = TPS659038_REG_ADDR_SMPS45,
- .iva.pmic = &tps659038,
-};
-
-void hw_data_init(void)
-{
- *prcm = &dra7xx_prcm;
- *dplls_data = &dra7xx_dplls;
- *omap_vcores = &beagle_x15_volts;
- *ctrl = &dra7xx_ctrl;
-}
-
-int board_init(void)
-{
- gpmc_init();
- gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
-
- return 0;
-}
-
-int board_late_init(void)
-{
- init_sata(0);
- /*
- * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
- * This is the POWERHOLD-in-Low behavior.
- */
- palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
- return 0;
-}
-
-void set_muxconf_regs_essential(void)
-{
- do_set_mux32((*ctrl)->control_padconf_core_base,
- early_padconf, ARRAY_SIZE(early_padconf));
-}
-
-#ifdef CONFIG_IODELAY_RECALIBRATION
-void recalibrate_iodelay(void)
-{
- __recalibrate_iodelay(core_padconf_array_essential,
- ARRAY_SIZE(core_padconf_array_essential),
- iodelay_cfg_array, ARRAY_SIZE(iodelay_cfg_array));
-}
-#endif
-
-#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
-int board_mmc_init(bd_t *bis)
-{
- omap_mmc_init(0, 0, 0, -1, -1);
- omap_mmc_init(1, 0, 0, -1, -1);
- return 0;
-}
-#endif
-
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
-int spl_start_uboot(void)
-{
- /* break into full u-boot on 'c' */
- if (serial_tstc() && serial_getc() == 'c')
- return 1;
-
-#ifdef CONFIG_SPL_ENV_SUPPORT
- env_init();
- env_relocate_spec();
- if (getenv_yesno("boot_os") != 1)
- return 1;
-#endif
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_USB_DWC3
-static struct dwc3_device usb_otg_ss1 = {
- .maximum_speed = USB_SPEED_SUPER,
- .base = DRA7_USB_OTG_SS1_BASE,
- .tx_fifo_resize = false,
- .index = 0,
-};
-
-static struct dwc3_omap_device usb_otg_ss1_glue = {
- .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 0,
-};
-
-static struct ti_usb_phy_device usb_phy1_device = {
- .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL,
- .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER,
- .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER,
- .index = 0,
-};
-
-static struct dwc3_device usb_otg_ss2 = {
- .maximum_speed = USB_SPEED_HIGH,
- .base = DRA7_USB_OTG_SS2_BASE,
- .tx_fifo_resize = false,
- .index = 1,
-};
-
-static struct dwc3_omap_device usb_otg_ss2_glue = {
- .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE,
- .utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
- .index = 1,
-};
-
-static struct ti_usb_phy_device usb_phy2_device = {
- .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER,
- .index = 1,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
- enable_usb_clocks(index);
- switch (index) {
- case 0:
- if (init == USB_INIT_DEVICE) {
- printf("port %d can't be used as device\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- } else {
- usb_otg_ss1.dr_mode = USB_DR_MODE_HOST;
- usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND;
- setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
- OTG_SS_CLKCTRL_MODULEMODE_HW |
- OPTFCLKEN_REFCLK960M);
- }
-
- ti_usb_phy_uboot_init(&usb_phy1_device);
- dwc3_omap_uboot_init(&usb_otg_ss1_glue);
- dwc3_uboot_init(&usb_otg_ss1);
- break;
- case 1:
- if (init == USB_INIT_DEVICE) {
- usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
- usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
- } else {
- printf("port %d can't be used as host\n", index);
- disable_usb_clocks(index);
- return -EINVAL;
- }
-
- ti_usb_phy_uboot_init(&usb_phy2_device);
- dwc3_omap_uboot_init(&usb_otg_ss2_glue);
- dwc3_uboot_init(&usb_otg_ss2);
- break;
- default:
- printf("Invalid Controller Index\n");
- }
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- switch (index) {
- case 0:
- case 1:
- ti_usb_phy_uboot_exit(index);
- dwc3_uboot_exit(index);
- dwc3_omap_uboot_exit(index);
- break;
- default:
- printf("Invalid Controller Index\n");
- }
- disable_usb_clocks(index);
- return 0;
-}
-
-int usb_gadget_handle_interrupts(int index)
-{
- u32 status;
-
- status = dwc3_omap_uboot_interrupt_status(index);
- if (status)
- dwc3_uboot_handle_interrupt(index);
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-
-/* Delay value to add to calibrated value */
-#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8)
-#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8)
-#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2)
-#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0)
-#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0)
-#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8)
-#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8)
-#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2)
-#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
-#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
-
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_addr = 1,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_addr = 2,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = CPSW_MDIO_BASE,
- .cpsw_base = CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 1,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .bd_ram_ofs = 0x2000,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
- int ret;
- uint8_t mac_addr[6];
- uint32_t mac_hi, mac_lo;
- uint32_t ctrl_val;
-
- /* try reading mac address from efuse */
- mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
- mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
- mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = mac_hi & 0xFF;
- mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
- mac_addr[4] = (mac_lo & 0xFF00) >> 8;
- mac_addr[5] = mac_lo & 0xFF;
-
- if (!getenv("ethaddr")) {
- printf("<ethaddr> not set. Validating first E-fuse MAC\n");
-
- if (is_valid_ethaddr(mac_addr))
- eth_setenv_enetaddr("ethaddr", mac_addr);
- }
-
- mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
- mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
- mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
- mac_addr[1] = (mac_hi & 0xFF00) >> 8;
- mac_addr[2] = mac_hi & 0xFF;
- mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
- mac_addr[4] = (mac_lo & 0xFF00) >> 8;
- mac_addr[5] = mac_lo & 0xFF;
-
- if (!getenv("eth1addr")) {
- if (is_valid_ethaddr(mac_addr))
- eth_setenv_enetaddr("eth1addr", mac_addr);
- }
-
- ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
- ctrl_val |= 0x22;
- writel(ctrl_val, (*ctrl)->control_core_control_io1);
-
- ret = cpsw_register(&cpsw_data);
- if (ret < 0)
- printf("Error %d registering CPSW switch\n", ret);
-
- return ret;
-}
-#endif
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-/* VTT regulator enable */
-static inline void vtt_regulator_enable(void)
-{
- if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
- return;
-
- gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
- gpio_direction_output(GPIO_DDR_VTT_EN, 1);
-}
-
-int board_early_init_f(void)
-{
- vtt_regulator_enable();
- return 0;
-}
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
- *
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * Based on board/ti/dra7xx/evm.c
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _MUX_DATA_BEAGLE_X15_H_
-#define _MUX_DATA_BEAGLE_X15_H_
-
-#include <asm/arch/mux_dra7xx.h>
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
- {GPMC_AD0, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad0.vin3a_d0 */
- {GPMC_AD1, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad1.vin3a_d1 */
- {GPMC_AD2, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad2.vin3a_d2 */
- {GPMC_AD3, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad3.vin3a_d3 */
- {GPMC_AD4, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad4.vin3a_d4 */
- {GPMC_AD5, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad5.vin3a_d5 */
- {GPMC_AD6, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad6.vin3a_d6 */
- {GPMC_AD7, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad7.vin3a_d7 */
- {GPMC_AD8, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad8.vin3a_d8 */
- {GPMC_AD9, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad9.vin3a_d9 */
- {GPMC_AD10, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad10.vin3a_d10 */
- {GPMC_AD11, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad11.vin3a_d11 */
- {GPMC_AD12, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad12.vin3a_d12 */
- {GPMC_AD13, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad13.vin3a_d13 */
- {GPMC_AD14, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_ad14.vin3a_d14 */
- {GPMC_AD15, (M2 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* gpmc_ad15.vin3a_d15 */
- {GPMC_A0, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a0.vin3a_d16 */
- {GPMC_A1, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a1.vin3a_d17 */
- {GPMC_A2, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a2.vin3a_d18 */
- {GPMC_A3, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a3.vin3a_d19 */
- {GPMC_A4, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a4.vin3a_d20 */
- {GPMC_A5, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a5.vin3a_d21 */
- {GPMC_A6, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a6.vin3a_d22 */
- {GPMC_A7, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a7.vin3a_d23 */
- {GPMC_A8, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a8.vin3a_hsync0 */
- {GPMC_A9, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a9.vin3a_vsync0 */
- {GPMC_A10, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a10.vin3a_de0 */
- {GPMC_A11, (M2 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* gpmc_a11.vin3a_fld0 */
- {GPMC_A12, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a12.gpio2_2 */
- {GPMC_A13, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a13.gpio2_3 */
- {GPMC_A14, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a14.gpio2_4 */
- {GPMC_A15, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a15.gpio2_5 */
- {GPMC_A16, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a16.gpio2_6 */
- {GPMC_A17, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_a17.gpio2_7 */
- {GPMC_A18, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_a18.gpio2_8 */
- {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a19.mmc2_dat4 */
- {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a20.mmc2_dat5 */
- {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a21.mmc2_dat6 */
- {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a22.mmc2_dat7 */
- {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a23.mmc2_clk */
- {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a24.mmc2_dat0 */
- {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a25.mmc2_dat1 */
- {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a26.mmc2_dat2 */
- {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_a27.mmc2_dat3 */
- {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* gpmc_cs1.mmc2_cmd */
- {GPMC_CS0, (M14 | PIN_INPUT_PULLDOWN)}, /* gpmc_cs0.gpio2_19 */
- {GPMC_CS2, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_cs2.gpio2_20 */
- {GPMC_CS3, (M2 | PIN_INPUT_PULLDOWN)}, /* gpmc_cs3.vin3a_clk0 */
- {GPMC_CLK, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_clk.dma_evt1 */
- {GPMC_ADVN_ALE, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_advn_ale.gpio2_23 */
- {GPMC_OEN_REN, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_oen_ren.gpio2_24 */
- {GPMC_WEN, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_wen.gpio2_25 */
- {GPMC_BEN0, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_ben0.dma_evt3 */
- {GPMC_BEN1, (M9 | PIN_INPUT_PULLDOWN)}, /* gpmc_ben1.dma_evt4 */
- {GPMC_WAIT0, (M14 | PIN_INPUT_PULLUP)}, /* gpmc_wait0.gpio2_28 */
- {VIN1B_CLK1, (M14 | PIN_INPUT_SLEW)}, /* vin1b_clk1.gpio2_31 */
- {VIN1A_D2, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d2.gpio3_6 */
- {VIN1A_D3, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d3.gpio3_7 */
- {VIN1A_D4, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d4.gpio3_8 */
- {VIN1A_D5, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d5.gpio3_9 */
- {VIN1A_D6, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d6.gpio3_10 */
- {VIN1A_D7, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d7.gpio3_11 */
- {VIN1A_D8, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d8.gpio3_12 */
- {VIN1A_D10, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d10.gpio3_14 */
- {VIN1A_D11, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d11.gpio3_15 */
- {VIN1A_D12, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d12.gpio3_16 */
- {VIN1A_D14, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d14.gpio3_18 */
- {VIN1A_D16, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d16.gpio3_20 */
- {VIN1A_D19, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d19.gpio3_23 */
- {VIN1A_D20, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d20.gpio3_24 */
- {VIN1A_D21, (M0 | PIN_INPUT_PULLDOWN)}, /* vin1a_d21.vin1a_d21 */
- {VIN1A_D22, (M14 | PIN_INPUT_PULLDOWN)}, /* vin1a_d22.gpio3_26 */
- {VIN2A_CLK0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_clk0.gpio3_28 */
- {VIN2A_DE0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_de0.gpio3_29 */
- {VIN2A_FLD0, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_fld0.gpio3_30 */
- {VIN2A_HSYNC0, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_hsync0.pr1_uart0_cts_n */
- {VIN2A_VSYNC0, (M11 | PIN_INPUT_PULLUP)}, /* vin2a_vsync0.pr1_uart0_rts_n */
- {VIN2A_D0, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_d0.pr1_uart0_rxd */
- {VIN2A_D1, (M11 | PIN_INPUT_PULLDOWN)}, /* vin2a_d1.pr1_uart0_txd */
- {VIN2A_D2, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d2.uart10_rxd */
- {VIN2A_D3, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d3.uart10_txd */
- {VIN2A_D4, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d4.uart10_ctsn */
- {VIN2A_D5, (M8 | PIN_INPUT_PULLDOWN)}, /* vin2a_d5.uart10_rtsn */
- {VIN2A_D6, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d6.gpio4_7 */
- {VIN2A_D7, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d7.gpio4_8 */
- {VIN2A_D8, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d8.gpio4_9 */
- {VIN2A_D9, (M14 | PIN_INPUT_PULLDOWN)}, /* vin2a_d9.gpio4_10 */
- {VIN2A_D10, (M10 | PIN_INPUT_PULLDOWN)}, /* vin2a_d10.ehrpwm2B */
- {VIN2A_D11, (M10 | PIN_INPUT_PULLDOWN)}, /* vin2a_d11.ehrpwm2_tripzone_input */
- {VIN2A_D12, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d12.rgmii1_txc */
- {VIN2A_D13, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d13.rgmii1_txctl */
- {VIN2A_D14, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d14.rgmii1_txd3 */
- {VIN2A_D15, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d15.rgmii1_txd2 */
- {VIN2A_D16, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d16.rgmii1_txd1 */
- {VIN2A_D17, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d17.rgmii1_txd0 */
- {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* vin2a_d18.rgmii1_rxc */
- {VIN2A_D19, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d19.rgmii1_rxctl */
- {VIN2A_D20, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d20.rgmii1_rxd3 */
- {VIN2A_D21, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d21.rgmii1_rxd2 */
- {VIN2A_D22, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d22.rgmii1_rxd1 */
- {VIN2A_D23, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* vin2a_d23.rgmii1_rxd0 */
- {VOUT1_CLK, (M0 | PIN_OUTPUT)}, /* vout1_clk.vout1_clk */
- {VOUT1_DE, (M0 | PIN_OUTPUT)}, /* vout1_de.vout1_de */
- {VOUT1_FLD, (M14 | PIN_INPUT)}, /* vout1_fld.gpio4_21 */
- {VOUT1_HSYNC, (M0 | PIN_OUTPUT)}, /* vout1_hsync.vout1_hsync */
- {VOUT1_VSYNC, (M0 | PIN_OUTPUT)}, /* vout1_vsync.vout1_vsync */
- {VOUT1_D0, (M0 | PIN_OUTPUT)}, /* vout1_d0.vout1_d0 */
- {VOUT1_D1, (M0 | PIN_OUTPUT)}, /* vout1_d1.vout1_d1 */
- {VOUT1_D2, (M0 | PIN_OUTPUT)}, /* vout1_d2.vout1_d2 */
- {VOUT1_D3, (M0 | PIN_OUTPUT)}, /* vout1_d3.vout1_d3 */
- {VOUT1_D4, (M0 | PIN_OUTPUT)}, /* vout1_d4.vout1_d4 */
- {VOUT1_D5, (M0 | PIN_OUTPUT)}, /* vout1_d5.vout1_d5 */
- {VOUT1_D6, (M0 | PIN_OUTPUT)}, /* vout1_d6.vout1_d6 */
- {VOUT1_D7, (M0 | PIN_OUTPUT)}, /* vout1_d7.vout1_d7 */
- {VOUT1_D8, (M0 | PIN_OUTPUT)}, /* vout1_d8.vout1_d8 */
- {VOUT1_D9, (M0 | PIN_OUTPUT)}, /* vout1_d9.vout1_d9 */
- {VOUT1_D10, (M0 | PIN_OUTPUT)}, /* vout1_d10.vout1_d10 */
- {VOUT1_D11, (M0 | PIN_OUTPUT)}, /* vout1_d11.vout1_d11 */
- {VOUT1_D12, (M0 | PIN_OUTPUT)}, /* vout1_d12.vout1_d12 */
- {VOUT1_D13, (M0 | PIN_OUTPUT)}, /* vout1_d13.vout1_d13 */
- {VOUT1_D14, (M0 | PIN_OUTPUT)}, /* vout1_d14.vout1_d14 */
- {VOUT1_D15, (M0 | PIN_OUTPUT)}, /* vout1_d15.vout1_d15 */
- {VOUT1_D16, (M0 | PIN_OUTPUT)}, /* vout1_d16.vout1_d16 */
- {VOUT1_D17, (M0 | PIN_OUTPUT)}, /* vout1_d17.vout1_d17 */
- {VOUT1_D18, (M0 | PIN_OUTPUT)}, /* vout1_d18.vout1_d18 */
- {VOUT1_D19, (M0 | PIN_OUTPUT)}, /* vout1_d19.vout1_d19 */
- {VOUT1_D20, (M0 | PIN_OUTPUT)}, /* vout1_d20.vout1_d20 */
- {VOUT1_D21, (M0 | PIN_OUTPUT)}, /* vout1_d21.vout1_d21 */
- {VOUT1_D22, (M0 | PIN_OUTPUT)}, /* vout1_d22.vout1_d22 */
- {VOUT1_D23, (M0 | PIN_OUTPUT)}, /* vout1_d23.vout1_d23 */
- {MDIO_MCLK, (M0 | PIN_INPUT_PULLUP)}, /* mdio_mclk.mdio_mclk */
- {MDIO_D, (M0 | PIN_INPUT_PULLUP)}, /* mdio_d.mdio_d */
- {RMII_MHZ_50_CLK, (M14 | PIN_INPUT_PULLUP)}, /* RMII_MHZ_50_CLK.gpio5_17 */
- {UART3_RXD, (M14 | PIN_INPUT_PULLDOWN)}, /* uart3_rxd.gpio5_18 */
- {UART3_TXD, (M14 | PIN_INPUT_PULLDOWN)}, /* uart3_txd.gpio5_19 */
- {RGMII0_TXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txc.rgmii0_txc */
- {RGMII0_TXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txctl.rgmii0_txctl */
- {RGMII0_TXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd3.rgmii0_txd3 */
- {RGMII0_TXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd2.rgmii0_txd2 */
- {RGMII0_TXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd1.rgmii0_txd1 */
- {RGMII0_TXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_txd0.rgmii0_txd0 */
- {RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxc.rgmii0_rxc */
- {RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)}, /* rgmii0_rxctl.rgmii0_rxctl */
- {RGMII0_RXD3, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd3.rgmii0_rxd3 */
- {RGMII0_RXD2, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd2.rgmii0_rxd2 */
- {RGMII0_RXD1, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd1.rgmii0_rxd1 */
- {RGMII0_RXD0, (M0 | PIN_INPUT_PULLUP | MANUAL_MODE)}, /* rgmii0_rxd0.rgmii0_rxd0 */
- {USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb1_drvvbus.usb1_drvvbus */
- {USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)}, /* usb2_drvvbus.usb2_drvvbus */
- {GPIO6_14, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_14.timer1 */
- {GPIO6_15, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_15.timer2 */
- {GPIO6_16, (M10 | PIN_INPUT_PULLUP)}, /* gpio6_16.timer3 */
- {XREF_CLK0, (M9 | PIN_INPUT_PULLDOWN)}, /* xref_clk0.clkout2 */
- {XREF_CLK1, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk1.gpio6_18 */
- {XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.gpio6_19 */
- {XREF_CLK3, (M9 | PIN_INPUT_PULLDOWN)}, /* xref_clk3.clkout3 */
- {MCASP1_ACLKX, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkx.i2c3_sda */
- {MCASP1_FSX, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_fsx.i2c3_scl */
- {MCASP1_ACLKR, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkr.i2c4_sda */
- {MCASP1_FSR, (M10 | PIN_INPUT_PULLUP)}, /* mcasp1_fsr.i2c4_scl */
- {MCASP1_AXR0, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr0.i2c5_sda */
- {MCASP1_AXR1, (M10 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr1.i2c5_scl */
- {MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */
- {MCASP1_AXR3, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr3.gpio5_5 */
- {MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */
- {MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */
- {MCASP1_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr6.gpio5_8 */
- {MCASP1_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr7.gpio5_9 */
- {MCASP1_AXR8, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr8.gpio5_10 */
- {MCASP1_AXR9, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr9.gpio5_11 */
- {MCASP1_AXR10, (M14 | PIN_INPUT_SLEW)}, /* mcasp1_axr10.gpio5_12 */
- {MCASP1_AXR11, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr11.gpio4_17 */
- {MCASP1_AXR12, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr12.mcasp7_axr0 */
- {MCASP1_AXR13, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.mcasp7_axr1 */
- {MCASP1_AXR14, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr14.mcasp7_aclkx */
- {MCASP1_AXR15, (M1 | PIN_INPUT_SLEW)}, /* mcasp1_axr15.mcasp7_fsx */
- {MCASP2_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkx.mcasp2_aclkx */
- {MCASP2_FSX, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_fsx.mcasp2_fsx */
- {MCASP2_ACLKR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkr.mcasp2_aclkr */
- {MCASP2_FSR, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_fsr.mcasp2_fsr */
- {MCASP2_AXR0, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr0.mcasp2_axr0 */
- {MCASP2_AXR1, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr1.mcasp2_axr1 */
- {MCASP2_AXR2, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_axr2.mcasp2_axr2 */
- {MCASP2_AXR3, (M0 | PIN_INPUT_SLEW)}, /* mcasp2_axr3.mcasp2_axr3 */
- {MCASP2_AXR4, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr4.mcasp2_axr4 */
- {MCASP2_AXR5, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr5.mcasp2_axr5 */
- {MCASP2_AXR6, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr6.mcasp2_axr6 */
- {MCASP2_AXR7, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr7.mcasp2_axr7 */
- {MCASP3_ACLKX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.mcasp3_aclkx */
- {MCASP3_FSX, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_fsx.mcasp3_fsx */
- {MCASP3_AXR0, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_axr0.mcasp3_axr0 */
- {MCASP3_AXR1, (M0 | PIN_INPUT_PULLDOWN)}, /* mcasp3_axr1.mcasp3_axr1 */
- {MCASP4_ACLKX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_aclkx.uart8_rxd */
- {MCASP4_FSX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_fsx.uart8_txd */
- {MCASP4_AXR0, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp4_axr0.uart8_ctsn */
- {MCASP4_AXR1, (M3 | PIN_INPUT_PULLUP)}, /* mcasp4_axr1.uart8_rtsn */
- {MCASP5_ACLKX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_aclkx.uart9_rxd */
- {MCASP5_FSX, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_fsx.uart9_txd */
- {MCASP5_AXR0, (M3 | PIN_INPUT_PULLDOWN)}, /* mcasp5_axr0.uart9_ctsn */
- {MCASP5_AXR1, (M3 | PIN_INPUT_PULLUP)}, /* mcasp5_axr1.uart9_rtsn */
- {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_clk.mmc1_clk */
- {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_cmd.mmc1_cmd */
- {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat0.mmc1_dat0 */
- {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat1.mmc1_dat1 */
- {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat2.mmc1_dat2 */
- {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */
- {MMC1_SDCD, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_sdcd.mmc1_sdcd */
- {MMC1_SDWP, (M14 | PIN_OUTPUT)}, /* mmc1_sdwp.gpio6_28 */
- {GPIO6_10, (M10 | PIN_INPUT_PULLDOWN)}, /* gpio6_10.ehrpwm2A */
- {GPIO6_11, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_11.gpio6_11 */
- {MMC3_CLK, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_clk.mmc3_clk */
- {MMC3_CMD, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_cmd.mmc3_cmd */
- {MMC3_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat0.mmc3_dat0 */
- {MMC3_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat1.mmc3_dat1 */
- {MMC3_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat2.mmc3_dat2 */
- {MMC3_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc3_dat3.mmc3_dat3 */
- {MMC3_DAT4, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat4.spi4_sclk */
- {MMC3_DAT5, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat5.spi4_d1 */
- {MMC3_DAT6, (M1 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat6.spi4_d0 */
- {MMC3_DAT7, (M1 | PIN_INPUT_PULLUP)}, /* mmc3_dat7.spi4_cs0 */
- {SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.gpio7_7 */
- {SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.gpio7_8 */
- {SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.gpio7_9 */
- {SPI1_CS0, (M14 | PIN_OUTPUT)}, /* spi1_cs0.gpio7_10 */
- {SPI1_CS1, (M14 | PIN_OUTPUT_PULLUP)}, /* spi1_cs1.gpio7_11 */
- {SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_cs2.gpio7_12 */
- {SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi1_cs3.hdmi1_cec */
- {SPI2_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi2_sclk.gpio7_14 */
- {SPI2_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi2_d1.gpio7_15 */
- {SPI2_D0, (M14 | PIN_INPUT_PULLUP)}, /* spi2_d0.gpio7_16 */
- {SPI2_CS0, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* spi2_cs0.gpio7_17 */
- {DCAN1_TX, (M15 | PULL_UP)}, /* dcan1_tx.safe for dcan1_tx */
- {DCAN1_RX, (M15 | PULL_UP)}, /* dcan1_rx.safe for dcan1_rx */
- {UART1_RXD, (M0 | PIN_INPUT_SLEW)}, /* uart1_rxd.uart1_rxd */
- {UART1_TXD, (M0 | PIN_INPUT_SLEW)}, /* uart1_txd.uart1_txd */
- {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* uart1_ctsn.Driveroff */
- {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* N/A.Driveroff */
- {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* uart2_txd.Driveroff */
- {UART2_CTSN, (M2 | PIN_INPUT_SLEW)}, /* uart2_ctsn.uart3_rxd */
- {UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */
- {I2C2_SDA, (M1 | PIN_INPUT)}, /* i2c2_sda.hdmi1_ddc_scl */
- {I2C2_SCL, (M1 | PIN_INPUT)}, /* i2c2_scl.hdmi1_ddc_sda */
- {WAKEUP0, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup0.Wakeup0 */
- {WAKEUP1, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup1.Wakeup1 */
- {WAKEUP2, (M0 | PIN_OUTPUT_PULLDOWN)}, /* Wakeup2.Wakeup2 */
- {WAKEUP3, (M0 | PIN_OUTPUT_PULLUP)}, /* Wakeup3.Wakeup3 */
- {ON_OFF, (M1 | PIN_OUTPUT_PULLUP)}, /* on_off.on_off */
- {RTC_PORZ, (M0 | PIN_OUTPUT_PULLDOWN)}, /* rtc_porz.rtc_porz */
- {RTCK, (M0 | PIN_INPUT_PULLDOWN)}, /* rtck.rtck */
-};
-
-const struct pad_conf_entry early_padconf[] = {
- {UART2_CTSN, (M2 | PIN_INPUT_SLEW)}, /* uart2_ctsn.uart3_rxd */
- {UART2_RTSN, (M1 | PIN_INPUT_SLEW)}, /* uart2_rtsn.uart3_txd */
- {I2C1_SDA, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SDA */
- {I2C1_SCL, (PIN_INPUT_PULLUP | M0)}, /* I2C1_SCL */
-};
-
-#ifdef CONFIG_IODELAY_RECALIBRATION
-const struct iodelay_cfg_entry iodelay_cfg_array[] = {
- {0x0114, 2980, 0}, /* CFG_GPMC_A0_IN */
- {0x0120, 2648, 0}, /* CFG_GPMC_A10_IN */
- {0x012C, 2918, 0}, /* CFG_GPMC_A11_IN */
- {0x0198, 2917, 0}, /* CFG_GPMC_A1_IN */
- {0x0204, 3156, 178}, /* CFG_GPMC_A2_IN */
- {0x0210, 3109, 246}, /* CFG_GPMC_A3_IN */
- {0x021C, 3142, 100}, /* CFG_GPMC_A4_IN */
- {0x0228, 3084, 33}, /* CFG_GPMC_A5_IN */
- {0x0234, 2778, 0}, /* CFG_GPMC_A6_IN */
- {0x0240, 3110, 0}, /* CFG_GPMC_A7_IN */
- {0x024C, 2874, 0}, /* CFG_GPMC_A8_IN */
- {0x0258, 3072, 0}, /* CFG_GPMC_A9_IN */
- {0x0264, 2466, 0}, /* CFG_GPMC_AD0_IN */
- {0x0270, 2523, 0}, /* CFG_GPMC_AD10_IN */
- {0x027C, 2453, 0}, /* CFG_GPMC_AD11_IN */
- {0x0288, 2285, 0}, /* CFG_GPMC_AD12_IN */
- {0x0294, 2206, 0}, /* CFG_GPMC_AD13_IN */
- {0x02A0, 1898, 0}, /* CFG_GPMC_AD14_IN */
- {0x02AC, 2473, 0}, /* CFG_GPMC_AD15_IN */
- {0x02B8, 2307, 0}, /* CFG_GPMC_AD1_IN */
- {0x02C4, 2691, 0}, /* CFG_GPMC_AD2_IN */
- {0x02D0, 2384, 0}, /* CFG_GPMC_AD3_IN */
- {0x02DC, 2462, 0}, /* CFG_GPMC_AD4_IN */
- {0x02E8, 2335, 0}, /* CFG_GPMC_AD5_IN */
- {0x02F4, 2370, 0}, /* CFG_GPMC_AD6_IN */
- {0x0300, 2389, 0}, /* CFG_GPMC_AD7_IN */
- {0x030C, 2672, 0}, /* CFG_GPMC_AD8_IN */
- {0x0318, 2334, 0}, /* CFG_GPMC_AD9_IN */
- {0x06F0, 480, 0}, /* CFG_RGMII0_RXC_IN */
- {0x06FC, 111, 1641}, /* CFG_RGMII0_RXCTL_IN */
- {0x0708, 272, 1116}, /* CFG_RGMII0_RXD0_IN */
- {0x0714, 243, 1260}, /* CFG_RGMII0_RXD1_IN */
- {0x0720, 0, 1614}, /* CFG_RGMII0_RXD2_IN */
- {0x072C, 105, 1673}, /* CFG_RGMII0_RXD3_IN */
- {0x0740, 531, 120}, /* CFG_RGMII0_TXC_OUT */
- {0x074C, 11, 60}, /* CFG_RGMII0_TXCTL_OUT */
- {0x0758, 7, 120}, /* CFG_RGMII0_TXD0_OUT */
- {0x0764, 0, 0}, /* CFG_RGMII0_TXD1_OUT */
- {0x0770, 276, 120}, /* CFG_RGMII0_TXD2_OUT */
- {0x077C, 440, 120}, /* CFG_RGMII0_TXD3_OUT */
- {0x0A70, 1551, 115}, /* CFG_VIN2A_D12_OUT */
- {0x0A7C, 816, 0}, /* CFG_VIN2A_D13_OUT */
- {0x0A88, 876, 0}, /* CFG_VIN2A_D14_OUT */
- {0x0A94, 312, 0}, /* CFG_VIN2A_D15_OUT */
- {0x0AA0, 58, 0}, /* CFG_VIN2A_D16_OUT */
- {0x0AAC, 0, 0}, /* CFG_VIN2A_D17_OUT */
- {0x0AB0, 702, 0}, /* CFG_VIN2A_D18_IN */
- {0x0ABC, 136, 976}, /* CFG_VIN2A_D19_IN */
- {0x0AD4, 210, 1357}, /* CFG_VIN2A_D20_IN */
- {0x0AE0, 189, 1462}, /* CFG_VIN2A_D21_IN */
- {0x0AEC, 232, 1278}, /* CFG_VIN2A_D22_IN */
- {0x0AF8, 0, 1397}, /* CFG_VIN2A_D23_IN */
-};
-#endif
-#endif /* _MUX_DATA_BEAGLE_X15_H_ */
--- /dev/null
+CONFIG_ARM=y
+CONFIG_OMAP54XX=y
+CONFIG_TARGET_BEAGLE_X15=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_OMAP54XX=y
-CONFIG_TARGET_BEAGLE_X15=y
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
--- /dev/null
+/*
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated.
+ * Felipe Balbi <balbi@ti.com>
+ *
+ * Configuration settings for the TI Beagle x15 board.
+ * See ti_omap5_common.h for omap5 common settings.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_AM57XX_EVM_H
+#define __CONFIG_AM57XX_EVM_H
+
+#define CONFIG_AM57XX
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_IODELAY_RECALIBRATION
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_ENV_SIZE (64 << 10)
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_DEVICE_AND_PART "0:1"
+#define FAT_ENV_FILE "uboot.env"
+
+#define CONSOLEDEV "ttyO2"
+#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_OMAP_ABE_SYSCK
+
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
+#include <configs/ti_omap5_common.h>
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+
+/* CPSW Ethernet */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
+#define CONFIG_MII /* Required in net/eth.c */
+#define CONFIG_PHY_GIGE /* per-board part of CPSW */
+#define CONFIG_PHYLIB
+#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
+
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* USB xHCI HOST */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+
+#define CONFIG_OMAP_USB_PHY
+#define CONFIG_OMAP_USB3PHY1_HOST
+
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+#endif /* __CONFIG_AM57XX_EVM_H */
+++ /dev/null
-/*
- * (C) Copyright 2014
- * Texas Instruments Incorporated.
- * Felipe Balbi <balbi@ti.com>
- *
- * Configuration settings for the TI Beagle x15 board.
- * See ti_omap5_common.h for omap5 common settings.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_BEAGLE_X15_H
-#define __CONFIG_BEAGLE_X15_H
-
-#define CONFIG_AM57XX
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_IODELAY_RECALIBRATION
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_NR_DRAM_BANKS 2
-
-#define CONFIG_ENV_SIZE (64 << 10)
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE "mmc"
-#define FAT_ENV_DEVICE_AND_PART "0:1"
-#define FAT_ENV_FILE "uboot.env"
-
-#define CONSOLEDEV "ttyO2"
-#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
-#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_OMAP_ABE_SYSCK
-
-/* Define the default GPT table for eMMC */
-#define PARTS_DEFAULT \
- "uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
-
-#include <configs/ti_omap5_common.h>
-
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-
-/* CPSW Ethernet */
-#define CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
-#define CONFIG_MII /* Required in net/eth.c */
-#define CONFIG_PHY_GIGE /* per-board part of CPSW */
-#define CONFIG_PHYLIB
-#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */
-
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* USB xHCI HOST */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_XHCI
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_USB_STORAGE
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
-
-#define CONFIG_OMAP_USB_PHY
-#define CONFIG_OMAP_USB3PHY1_HOST
-
-/* SATA */
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-
-#endif /* __CONFIG_BEAGLE_X5_H */
projects / u-boot / commitdiff