]> git.sur5r.net Git - u-boot/commitdiff
spi: ti_qspi: Use 4-byte opcode for mmap read
authorVignesh R <vigneshr@ti.com>
Mon, 23 Nov 2015 12:13:36 +0000 (17:43 +0530)
committerTom Rini <trini@konsulko.com>
Wed, 20 Jan 2016 15:19:33 +0000 (10:19 -0500)
ti-qspi driver currently uses 3-byte addressing mode(and opcodes) for
memory-mapped read. This restricts maximum addressable flash size to
16MB.
Enable the 4-byte addressing(and use 4-byte opcode) for memory-mapped
read to allow access to addresses above 16MB.

Signed-off-by: Ravi Babu <ravibabu@ti.com>
[vigneshr@ti.com: Re-word commit description]
Signed-off-by: Vignesh R <vigneshr@ti.com>
drivers/spi/ti_qspi.c

index 78d8b1368de697df724fc8f63661f1c340e4155d..b5c974ce3839b9af2f9043e993dd4b0b4087c713 100644 (file)
@@ -52,15 +52,15 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define QSPI_CMD_READ                   (0x3 << 0)
 #define QSPI_CMD_READ_DUAL             (0x6b << 0)
-#define QSPI_CMD_READ_QUAD              (0x6b << 0)
+#define QSPI_CMD_READ_QUAD              (0x6c << 0)
 #define QSPI_CMD_READ_FAST              (0x0b << 0)
-#define QSPI_SETUP0_NUM_A_BYTES         (0x2 << 8)
+#define QSPI_SETUP0_NUM_A_BYTES         (0x3 << 8)
 #define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
 #define QSPI_SETUP0_NUM_D_BYTES_8_BITS  (0x1 << 10)
 #define QSPI_SETUP0_READ_NORMAL         (0x0 << 12)
 #define QSPI_SETUP0_READ_DUAL           (0x1 << 12)
 #define QSPI_SETUP0_READ_QUAD           (0x3 << 12)
-#define QSPI_CMD_WRITE                  (0x2 << 16)
+#define QSPI_CMD_WRITE                  (0x12 << 16)
 #define QSPI_NUM_DUMMY_BITS             (0x0 << 24)
 
 /* ti qspi register set */