Changes for U-Boot 1.1.4:
======================================================================
+* Add ARM946E cpu and core module targets; remap memory to 0x00000000
+ Patch by Peter Pearse, 2 Feb 2005
+
* Fix error handling in tools/env/fw_env.c
Patch by Ara Avanesyan, 01 Feb 2005
## ARM7 Systems
#########################################################################
-LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
+LIST_ARM7=" \
+ B2 ep7312 evb4510 impa7 \
+ integratorap_CM720T integratorap_CM7TDMI \
+ modnet50 \
+"
#########################################################################
## ARM9 Systems
#########################################################################
LIST_ARM9=" \
- at91rm9200dk cmc_pu2 integratorcp integratorap \
+ at91rm9200dk cmc_pu2 \
+ integratorap_CM920T integratorap_CM920T_ETM \
+ integratorap_CM922T_XA10 integratorap_CM926EJ_S \
+ integratorap_CM940T integratorap_CM946E_S \
+ integratorap_CM966E_S integratorcp_CM920T \
+ integratorcp_CM920T_ETM integratorcp_CM922T_XA10 \
+ integratorcp_CM926EJ_S integratorcp_CM940T \
+ integratorcp_CM946E_S integratorcp_CM966E_S \
lpd7a400 mx1ads mx1fs2 omap1510inn \
omap1610h2 omap1610inn omap730p2 scb9328 \
smdk2400 smdk2410 trab VCMA9 \
versatile voiceblue \
"
+#########################################################################
+## ARM10 Systems
+#########################################################################
+LIST_ARM10=" \
+ integratorcp_CM10220E integratorcp_CM1026EJ_S \
+"
+
#########################################################################
## ARM11 Systems
#########################################################################
-LIST_ARM11="omap2420h4"
+LIST_ARM11=" \
+ integratorcp_CM1136JF_S omap2420h4 \
+"
#########################################################################
## Xscale Systems
LIST_pxa=" \
adsvix cerf250 cradle csb226 \
innokom lubbock wepep250 xaeniax \
- xm250 xsengine \
+ xm250 xsengine \
"
LIST_ixp="ixdp425"
LIST_arm=" \
${LIST_SA} \
- ${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM11} \
+ ${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM10} ${LIST_ARM11} \
${LIST_pxa} ${LIST_ixp} \
"
do
case "$arg" in
ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
- arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
+ arm|SA|ARM7|ARM9|ARM10|ARM11|pxa|ixp| \
microblaze| \
mips|mips_el| \
nios|nios2| \
cmc_pu2_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
-integratorap_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorap
+########################################################################
+## ARM Integrator boards
+## There are two variants /AP && /CP
+## - many different core modules (CMs) can be used
+## - some share characteristics
+## Those without specific cpu support can still use U-Boot
+## provided the ARM boot monitor (or similar) runs before U-Boot
+## to set up the platform e.g. map writeable memory to 0x00000000
+## setup MMU, setup caches etc.
+## Ported cores are:-
+## ARM926EJ-S
+## ARM946E-S
+##
+########################################################################
+xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2))
+xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2))
+#########################################################################
+## Integrator/AP
+#########################################################################
+integratorap_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/AP */" >> tmp.fil; \
+ echo "/* Core module not defined */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
+ echo -n " /* Integrator core module " >> tmp.fil; \
+ echo "with unknown core */" >> tmp.fil; \
+ cpu=arm_intcm; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/integratorap/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a integratorap arm arm_intcm integratorap;
+
+integratorap_CM720T_config integratorap_CM7TDMI_config \
+integratorap_CM920T_config integratorap_CM920T_ETM_config \
+integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \
+integratorap_CM940T_config integratorap_CM946E_S_config \
+integratorap_CM966E_S_config integratorap_CM10200E_config \
+integratorap_CM10220E_config integratorap_CM1026EJ_S_config \
+integratorap_CM1136JF_S_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/AP */" >> tmp.fil; \
+ cm=$(call xtract_int_cm,ap,$@); \
+ echo -n "#define CONFIG_$$cm " >> tmp.fil; \
+ echo " /* core module */" >> tmp.fil; \
+ case $$cm in \
+ CM920T) \
+ echo -n "#define CONFIG_ARM920" >> tmp.fil; \
+ echo -n "T 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM920T" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm920t;; \
+ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
+ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM926EJ-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm926ejs;; \
+ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
+ echo -n "E_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM946E-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm946es;; \
+ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
+ echo -n "TCM 1 /* Int" >> tmp.fil; \
+ echo -n "egrator core module w" >> tmp.fil; \
+ echo -n "ith unported core" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm_intcm;; \
+ esac; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \
+ $(call xtract_int_board,ap,$@);
-integratorcp_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs integratorcp
+#########################################################################
+## Integrator/CP
+#########################################################################
+integratorcp_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/CP */" >> tmp.fil; \
+ echo "/* Core module not defined */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
+ echo -n " /* Integrator core module " >> tmp.fil; \
+ echo "with unknown core */" >> tmp.fil; \
+ cpu=arm_intcm; \
+ echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \
+ echo -n " /* CM may not have " >> tmp.fil; \
+ echo "multiple SSRAM mapping */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \
+ echo -n " /* CM may not support SPD " >> tmp.fil; \
+ echo "query */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \
+ echo -n " /* CM may not support " >> tmp.fil; \
+ echo "remapping */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \
+ echo -n " /* CM may not have " >> tmp.fil; \
+ echo "initialization reg */" >> tmp.fil; \
+ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \
+ echo -n " /* CM may not have TCRAM */" >> tmp.fil; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/integratorcp/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a integratorcp arm arm_intcm integratorcp;
+
+integratorcp_CM920T_config integratorcp_CM920T_ETM_config \
+integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \
+integratorcp_CM940T_config integratorcp_CM946E_S_config \
+integratorcp_CM966E_S_config integratorcp_CM10200E_config \
+integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \
+integratorcp_CM1136JF_S_config : unconfig
+ @echo -n "/* Integrator configuration implied " > tmp.fil; \
+ echo " by Makefile target */" >> tmp.fil; \
+ echo >> tmp.fil
+ @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
+ echo " /* Integrator board */" >> tmp.fil; \
+ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
+ echo " 1 /* Integrator/CP */" >> tmp.fil; \
+ cm=$(call xtract_int_cm,cp,$@); \
+ echo -n "#define CONFIG_$$cm " >> tmp.fil; \
+ echo " /* core module */" >> tmp.fil; \
+ echo "/* $$cm core module */" >> tmp.fil; \
+ case $$cm in \
+ CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \
+ echo -n "T 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM920T" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm920t;; \
+ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
+ echo -n "E_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM946E-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm946es;; \
+ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
+ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
+ echo -n " core is ARM926EJ-S" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm926ejs;; \
+ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
+ echo -n "TCM 1 /* Int" >> tmp.fil; \
+ echo -n "egrator core module w" >> tmp.fil; \
+ echo -n "ith unported core" >> tmp.fil; \
+ echo " */" >> tmp.fil; \
+ cpu=arm_intcm;; \
+ esac; \
+ mv tmp.fil ./include/config.h; \
+ ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \
+ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
+ $$ubootlds > $$ubootlds.tmp; \
+ mv -f $$ubootlds.tmp $$ubootlds; \
+ ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \
+ $(call xtract_int_board,cp,$@);
lpd7a400_config \
lpd7a404_config: unconfig
LIB = lib$(BOARD).a
OBJS := integratorap.o flash.o
-SOBJS := platform.o
+SOBJS := platform.o memsetup.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
-include .depend
#########################################################################
+
{
return 0;
}
+
+/* The Integrator/AP timer1 is clocked at 24MHz
+ * can be divided by 16 or 256
+ * and is a 16-bit counter
+ */
+/* U-Boot expects a 32 bit timer running at CFG_HZ*/
+static ulong timestamp; /* U-Boot ticks since startup */
+static ulong total_count = 0; /* Total timer count */
+static ulong lastdec; /* Timer reading at last call */
+static ulong div_clock = 256; /* Divisor applied to the timer clock */
+static ulong div_timer = 1; /* Divisor to convert timer reading
+ * change to U-Boot ticks
+ */
+/* CFG_HZ = CFG_HZ_CLOCK/(div_clock * div_timer) */
+
+#define TIMER_LOAD_VAL 0x0000FFFFL
+#define READ_TIMER ((*(volatile ulong *)(CFG_TIMERBASE+4)) & 0x0000FFFFL)
+
+/* all function return values in U-Boot ticks i.e. (1/CFG_HZ) sec
+ * - unless otherwise stated
+ */
+
+/* starts a counter
+ * - the Integrator/AP timer issues an interrupt
+ * each time it reaches zero
+ */
+int interrupt_init (void)
+{
+ /* Load timer with initial value */
+ *(volatile ulong *)(CFG_TIMERBASE + 0) = TIMER_LOAD_VAL;
+ /* Set timer to be
+ * enabled 1
+ * free-running 0
+ * XX 00
+ * divider 256 10
+ * XX 00
+ */
+ *(volatile ulong *)(CFG_TIMERBASE + 8) = 0x00000088;
+ total_count = 0;
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ div_timer = CFG_HZ_CLOCK / CFG_HZ;
+ div_timer /= div_clock;
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base_ticks)
+{
+ return get_timer_masked () - base_ticks;
+}
+
+void set_timer (ulong ticks)
+{
+ timestamp = ticks;
+ total_count = ticks * div_timer;
+ reset_timer_masked();
+}
+
+/* delay x useconds */
+void udelay (unsigned long usec)
+{
+ ulong tmo, tmp;
+
+ /* Convert to U-Boot ticks */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000000L);
+
+ tmp = get_timer_masked(); /* get current timestamp */
+ tmo += tmp; /* wake up timestamp */
+
+ while (get_timer_masked () < tmo)/* loop till event */
+ {
+ /*NOP*/;
+ }
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER; /* capture current decrementer value */
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+/* converts the timer reading to U-Boot ticks */
+/* the timestamp is the number of ticks since reset */
+/* This routine does not detect wraps unless called regularly
+ ASSUMES a call at least every 16 seconds to detect every reload */
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER; /* current count */
+
+ if(now > lastdec)
+ {
+ /* Must have wrapped */
+ total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
+ } else {
+ total_count += lastdec - now;
+ }
+ lastdec = now;
+ timestamp = total_count/div_timer;
+
+ return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+ udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * Return the timebase clock frequency
+ * i.e. how often the timer decrements
+ */
+ulong get_tbclk (void)
+{
+ return CFG_HZ_CLOCK/div_clock;
+}
--- /dev/null
+/*
+ * Memory setup for integratorAP
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Memory setup
+ * - the reset defaults are assumed sufficient
+ */
+
+.globl memsetup
+memsetup:
+ mov pc,lr
+
/* All done by Integrator's boot monitor! */
mov pc, lr
+
+ /* Reset using CM control register */
+.global reset_cpu
+reset_cpu:
+ mov r0, #CM_BASE
+ ldr r1,[r0,#OS_CTRL]
+ orr r1,r1,#CMMASK_RESET
+ str r1,[r0]
+
+reset_failed:
+ b reset_failed
+
LIB = lib$(BOARD).a
OBJS := integratorcp.o flash.o
-SOBJS := platform.o
+SOBJS := platform.o memsetup.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
#if defined(CONFIG_SHOW_BOOT_PROGRESS)
void show_boot_progress(int progress)
{
- printf("Boot reached stage %d\n", progress);
+ printf("Boot reached stage %d\n", progress);
}
#endif
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
/*
* Miscellaneous platform dependent initialisations
*/
gd->flags = 0;
+#ifdef CONFIG_CM_REMAP
+extern void cm_remap(void);
+ cm_remap(); /* remaps writeable memory to 0x00000000 */
+#endif
+
icache_enable ();
flash__init ();
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
+ for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
******************************/
int dram_init (void)
{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+#ifdef CONFIG_CM_SPD_DETECT
+ {
+extern void dram_query(void);
+ unsigned long cm_reg_sdram;
+ unsigned long sdram_shift;
+
+ dram_query(); /* Assembler accesses to CM registers */
+ /* Queries the SPD values */
+
+ /* Obtain the SDRAM size from the CM SDRAM register */
+
+ cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
+ /* Register SDRAM size
+ *
+ * 0xXXXXXXbbb000bb 16 MB
+ * 0xXXXXXXbbb001bb 32 MB
+ * 0xXXXXXXbbb010bb 64 MB
+ * 0xXXXXXXbbb011bb 128 MB
+ * 0xXXXXXXbbb100bb 256 MB
+ *
+ */
+ sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
+ gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
+
+ }
+#endif /* CM_SPD_DETECT */
+
return 0;
}
+
+/* The Integrator/CP timer1 is clocked at 1MHz
+ * can be divided by 16 or 256
+ * and can be set up as a 32-bit timer
+ */
+/* U-Boot expects a 32 bit timer, running at CFG_HZ */
+/* Keep total timer count to avoid losing decrements < div_timer */
+static unsigned long long total_count = 0;
+static unsigned long long lastdec; /* Timer reading at last call */
+static unsigned long long div_clock = 1; /* Divisor applied to timer clock */
+static unsigned long long div_timer = 1; /* Divisor to convert timer reading
+ * change to U-Boot ticks
+ */
+/* CFG_HZ = CFG_HZ_CLOCK/(div_clock * div_timer) */
+static ulong timestamp; /* U-Boot ticks since startup */
+
+#define TIMER_LOAD_VAL ((ulong)0xFFFFFFFF)
+#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
+
+/* all function return values in U-Boot ticks i.e. (1/CFG_HZ) sec
+ * - unless otherwise stated
+ */
+
+/* starts up a counter
+ * - the Integrator/CP timer can be set up to issue an interrupt */
+int interrupt_init (void)
+{
+ /* Load timer with initial value */
+ *(volatile ulong *)(CFG_TIMERBASE + 0) = TIMER_LOAD_VAL;
+ /* Set timer to be
+ * enabled 1
+ * periodic 1
+ * no interrupts 0
+ * X 0
+ * divider 1 00 == less rounding error
+ * 32 bit 1
+ * wrapping 0
+ */
+ *(volatile ulong *)(CFG_TIMERBASE + 8) = 0x000000C2;
+ /* init the timestamp */
+ total_count = 0ULL;
+ reset_timer_masked();
+
+ div_timer = (unsigned long long)(CFG_HZ_CLOCK / CFG_HZ);
+ div_timer /= div_clock;
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base_ticks)
+{
+ return get_timer_masked () - base_ticks;
+}
+
+void set_timer (ulong ticks)
+{
+ timestamp = ticks;
+ total_count = (unsigned long long)ticks * div_timer;
+}
+
+/* delay usec useconds */
+void udelay (unsigned long usec)
+{
+ ulong tmo, tmp;
+
+ /* Convert to U-Boot ticks */
+ tmo = usec * CFG_HZ;
+ tmo /= (1000000L);
+
+ tmp = get_timer_masked(); /* get current timestamp */
+ tmo += tmp; /* form target timestamp */
+
+ while (get_timer_masked () < tmo)/* loop till event */
+ {
+ /*NOP*/;
+ }
+}
+
+void reset_timer_masked (void)
+{
+ /* capure current decrementer value */
+ lastdec = (unsigned long long)READ_TIMER;
+ /* start "advancing" time stamp from 0 */
+ timestamp = 0L;
+}
+
+/* converts the timer reading to U-Boot ticks */
+/* the timestamp is the number of ticks since reset */
+ulong get_timer_masked (void)
+{
+ /* get current count */
+ unsigned long long now = (unsigned long long)READ_TIMER;
+
+ if(now > lastdec)
+ {
+ /* Must have wrapped */
+ total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
+ } else {
+ total_count += lastdec - now;
+ }
+ lastdec = now;
+ timestamp = (ulong)(total_count/div_timer);
+
+ return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+ udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return (unsigned long long)get_timer(0);
+}
+
+/*
+ * Return the timebase clock frequency
+ * i.e. how often the timer decrements
+ */
+ulong get_tbclk (void)
+{
+ return (ulong)(((unsigned long long)CFG_HZ_CLOCK)/div_clock);
+}
--- /dev/null
+/*
+ * Memory setup for integratorAP
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * Memory setup
+ * - the reset defaults are assumed sufficient
+ */
+
+.globl memsetup
+memsetup:
+ mov pc,lr
+
#include <config.h>
#include <version.h>
+/* Reset using CM control register */
+.global reset_cpu
+reset_cpu:
+ mov r0, #CM_BASE
+ ldr r1,[r0,#OS_CTRL]
+ orr r1,r1,#CMMASK_RESET
+ str r1,[r0]
+
+reset_failed:
+ b reset_failed
+
+/* set up the platform, once the cpu has been initialized */
.globl platformsetup
platformsetup:
+ /* If U-Boot has been run after the ARM boot monitor
+ * then all the necessary actions have been done
+ * otherwise we are running from user flash mapped to 0x00000000
+ * --- DO NOT REMAP BEFORE THE CODE HAS BEEN RELOCATED --
+ * Changes to the (possibly soft) reset defaults of the processor
+ * itself should be performed in cpu/arm<>/start.S
+ * This function affects only the core module or board settings
+ */
+
+#ifdef CONFIG_CM_INIT
+ /* CM has an initialization register
+ * - bits in it are wired into test-chip pins to force
+ * reset defaults
+ * - may need to change its contents for U-Boot
+ */
+
+ /* set the desired CM specific value */
+ mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
+
+#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
+ orr r2,r2,#CMMASK_INIT_102
+#else
+
+#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
+ !defined (CONFIG_CM940T)
+
+#ifdef CONFIG_CM_MULTIPLE_SSRAM
+ /* set simple mapping */
+ and r2,r2,#CMMASK_MAP_SIMPLE
+#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
+
+#ifdef CONFIG_CM_TCRAM
+ /* disable TCRAM */
+ and r2,r2,#CMMASK_TCRAM_DISABLE
+#endif /* #ifdef CONFIG_CM_TCRAM */
+
+#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
+ defined (CONFIG_CM1136JF_S)
+
+ and r2,r2,#CMMASK_LE
+
+#endif /* cpu with little endian initialization */
+
+ orr r2,r2,#CMMASK_CMxx6_COMMON
+
+#endif /* CMxx6 code */
+
+#endif /* ARM102xxE value */
+
+ /* read CM_INIT */
+ mov r0, #CM_BASE
+ ldr r1, [r0, #OS_INIT]
+ /* check against desired bit setting */
+ and r3,r1,r2
+ cmp r3,r2
+ beq init_reg_OK
+
+ /* lock for change */
+ mov r3, #CMVAL_LOCK
+ and r3,r3,#CMMASK_LOCK
+ str r3, [r0, #OS_LOCK]
+ /* set desired value */
+ orr r1,r1,r2
+ /* write & relock CM_INIT */
+ str r1, [r0, #OS_INIT]
+ mov r1, #CMVAL_UNLOCK
+ str r1, [r0, #OS_LOCK]
+
+ /* soft reset so new values used */
+ b reset_cpu
+
+init_reg_OK:
+
+#endif /* CONFIG_CM_INIT */
+
+ mov pc, lr
+
+#ifdef CONFIG_CM_SPD_DETECT
+ /* Fast memory is available for the DRAM data
+ * - ensure it has been transferred, then summarize the data
+ * into a CM register
+ */
+.globl dram_query
+dram_query:
+ stmfd r13!,{r4-r6,lr}
+ /* set up SDRAM info */
+ /* - based on example code from the CM User Guide */
+ mov r0, #CM_BASE
+
+readspdbit:
+ ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */
+ and r1, r1, #0x20 /* mask SPD bit (5) */
+ cmp r1, #0x20 /* test if set */
+ bne readspdbit
+
+setupsdram:
+ add r0, r0, #OS_SPD /* address the copy of the SDP data */
+ ldrb r1, [r0, #3] /* number of row address lines */
+ ldrb r2, [r0, #4] /* number of column address lines */
+ ldrb r3, [r0, #5] /* number of banks */
+ ldrb r4, [r0, #31] /* module bank density */
+ mul r5, r4, r3 /* size of SDRAM (MB divided by 4) */
+ mov r5, r5, ASL#2 /* size in MB */
+ mov r0, #CM_BASE /* reload for later code */
+ cmp r5, #0x10 /* is it 16MB? */
+ bne not16
+ mov r6, #0x2 /* store size and CAS latency of 2 */
+ b writesize
+
+not16:
+ cmp r5, #0x20 /* is it 32MB? */
+ bne not32
+ mov r6, #0x6
+ b writesize
+
+not32:
+ cmp r5, #0x40 /* is it 64MB? */
+ bne not64
+ mov r6, #0xa
+ b writesize
+
+not64:
+ cmp r5, #0x80 /* is it 128MB? */
+ bne not128
+ mov r6, #0xe
+ b writesize
+
+not128:
+ /* if it is none of these sizes then it is either 256MB, or
+ * there is no SDRAM fitted so default to 256MB
+ */
+ mov r6, #0x12
+
+writesize:
+ mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */
+ orr r2, r1, r2, ASL#12 /* OR in column address lines */
+ orr r3, r2, r3, ASL#16 /* OR in number of banks */
+ orr r6, r6, r3 /* OR in size and CAS latency */
+ str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */
+
+#endif /* #ifdef CONFIG_CM_SPD_DETECT */
+
+ ldmfd r13!,{r4-r6,pc} /* back to caller */
+
+#ifdef CONFIG_CM_REMAP
+ /* CM remap bit is operational
+ * - use it to map writeable memory at 0x00000000, in place of flash
+ */
+.globl cm_remap
+cm_remap:
+ stmfd r13!,{r4-r10,lr}
+
+ mov r0, #CM_BASE
+ ldr r1, [r0, #OS_CTRL]
+ orr r1, r1, #CMMASK_REMAP /* set remap and led bits */
+ str r1, [r0, #OS_CTRL]
+
+ /* Now 0x00000000 is writeable, replace the vectors */
+ ldr r0, =_start /* r0 <- start of vectors */
+ ldr r2, =_armboot_start /* r2 <- past vectors */
+ sub r1,r1,r1 /* destination 0x00000000 */
+
+copy_vec:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ ble copy_vec
+
+ ldmfd r13!,{r4-r10,pc} /* back to caller */
+
+#endif /* #ifdef CONFIG_CM_REMAP */
- /* All done by IntegratorCP's boot monitor! */
- mov pc, lr
unsigned long value;
__asm__ __volatile__(
- "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
: "=r" (value)
:
: "memory");
printf ("write %08lx to p15/c1\n", value);
#endif
__asm__ __volatile__(
- "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
:
: "r" (value)
: "memory");
for (i = 0; i < 100; i++);
}
-/* See also ARM Ref. Man. */
+/* See also ARM920T Technical reference Manual */
#define C1_MMU (1<<0) /* mmu off/on */
#define C1_ALIGN (1<<1) /* alignment faults off/on */
#define C1_DC (1<<2) /* dcache off/on */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
#define C1_SYS_PROT (1<<8) /* system protection */
#define C1_ROM_PROT (1<<9) /* ROM protection */
#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+
int cpu_init (void)
{
/* flush I/D-cache */
i = 0;
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+
return (0);
}
{
ulong reg;
- reg = read_p15_c1 ();
+ reg = read_p15_c1 (); /* get control reg. */
cp_delay ();
write_p15_c1 (reg | C1_IC);
}
*/
#include <common.h>
-
#include <arm920t.h>
#include <asm/proc-armv/ptrace.h>
void do_irq (struct pt_regs *pt_regs)
{
+#if defined (CONFIG_USE_IRQ) && defined (CONFIG_ARCH_INTEGRATOR)
+ /* ASSUMED to be a timer interrupt */
+ /* Just clear it - count handled in */
+ /* integratorap.c */
+ *(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
+#else
printf ("interrupt request\n");
show_regs (pt_regs);
bad_mode ();
+#endif
}
{
volatile int i;
- /* Many OMAP regs need at least 2 nops */
+ /* copro seems to need some delay between reading and writing */
for (i = 0; i < 100; i++);
}
-/* See also ARM Ref. Man. */
+/* See also ARM926EJ-S Technical Reference Manual */
#define C1_MMU (1<<0) /* mmu off/on */
#define C1_ALIGN (1<<1) /* alignment faults off/on */
#define C1_DC (1<<2) /* dcache off/on */
-#define C1_WB (1<<3) /* merging write buffer on/off */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
#define C1_SYS_PROT (1<<8) /* system protection */
#define C1_ROM_PROT (1<<9) /* ROM protection */
#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+
int cpu_init (void)
{
/* flush I/D-cache */
i = 0;
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+
return (0);
}
*/
#include <common.h>
-#include <arm925t.h>
-
+#include <arm926ejs.h>
#include <asm/proc-armv/ptrace.h>
#define TIMER_LOAD_VAL 0xffffffff
#ifdef CONFIG_OMAP
#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8))
#endif
-#ifdef CONFIG_INTEGRATOR
-#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
-#endif
#ifdef CONFIG_VERSATILE
#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4))
#endif
bad_mode ();
}
+#ifdef CONFIG_INTEGRATOR
+
+ /* Timer functionality supplied by Integrator board (AP or CP) */
+
+#else
+
static ulong timestamp;
static ulong lastdec;
val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT);
*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val;
#endif /* CONFIG_OMAP */
-#ifdef CONFIG_INTEGRATOR
- /* Load timer with initial value */
- *(volatile ulong *)(CFG_TIMERBASE + 0) = TIMER_LOAD_VAL;
- /* Set timer to be enabled, free-running, no interrupts, 256 divider */
- *(volatile ulong *)(CFG_TIMERBASE + 8) = 0x8C;
-#endif /* CONFIG_INTEGRATOR */
+
#ifdef CONFIG_VERSATILE
*(volatile ulong *)(CFG_TIMERBASE + 0) = CFG_TIMER_RELOAD; /* TimerLoad */
*(volatile ulong *)(CFG_TIMERBASE + 4) = CFG_TIMER_RELOAD; /* TimerValue */
tbclk = CFG_HZ;
return tbclk;
}
+
+#endif /* CONFIG_INTEGRATOR */
#endif
+# ifdef CONFIG_INTEGRATOR
+
+ /* Satisfied by Integrator routine (AP or CP) */
+
+#else
+
.align 5
.globl reset_cpu
reset_cpu:
_loop_forever:
b _loop_forever
-
rstctl1:
.word 0xfffece10
+
+#endif /* #ifdef CONFIG_INTEGRATOR */
+
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = interrupts.o cpu.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
+
--- /dev/null
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -msoft-float
+
+PLATFORM_CPPFLAGS += -march=armv4
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <arm946es.h>
+
+/* read co-processor 15, register #1 (control register) */
+static unsigned long read_p15_c1 (void)
+{
+ unsigned long value;
+
+ __asm__ __volatile__(
+ "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
+ : "=r" (value)
+ :
+ : "memory");
+
+#ifdef MMU_DEBUG
+ printf ("p15/c1 is = %08lx\n", value);
+#endif
+ return value;
+}
+
+/* write to co-processor 15, register #1 (control register) */
+static void write_p15_c1 (unsigned long value)
+{
+#ifdef MMU_DEBUG
+ printf ("write %08lx to p15/c1\n", value);
+#endif
+ __asm__ __volatile__(
+ "mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
+ :
+ : "r" (value)
+ : "memory");
+
+ read_p15_c1 ();
+}
+
+static void cp_delay (void)
+{
+ volatile int i;
+
+ /* copro seems to need some delay between reading and writing */
+ for (i = 0; i < 100; i++);
+}
+
+/* See also ARM946E-S Technical Reference Manual */
+#define C1_MMU (1<<0) /* mmu off/on */
+#define C1_ALIGN (1<<1) /* alignment faults off/on */
+#define C1_DC (1<<2) /* dcache off/on */
+
+#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
+#define C1_SYS_PROT (1<<8) /* system protection */
+#define C1_ROM_PROT (1<<9) /* ROM protection */
+#define C1_IC (1<<12) /* icache off/on */
+#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
+
+
+int cpu_init (void)
+{
+ /*
+ * setup up stacks if necessary
+ */
+#ifdef CONFIG_USE_IRQ
+ DECLARE_GLOBAL_DATA_PTR;
+
+ IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ unsigned long i;
+
+ disable_interrupts ();
+
+ /* ARM926E-S needs the protection unit enabled for the icache to have
+ * been enabled - left for possible later use
+ * should turn off the protection unit as well....
+ */
+ /* turn off I/D-cache */
+ asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+ i &= ~(C1_DC | C1_IC);
+ asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+
+ /* flush I/D-cache */
+ i = 0;
+ asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+ asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
+ return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ extern void reset_cpu (ulong addr);
+
+ disable_interrupts ();
+ reset_cpu (0);
+ /*NOTREACHED*/
+ return (0);
+}
+/* ARM926E-S needs the protection unit enabled for this to have any effect
+ - left for possible later use */
+void icache_enable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 (); /* get control reg. */
+ cp_delay ();
+ write_p15_c1 (reg | C1_IC);
+}
+
+void icache_disable (void)
+{
+ ulong reg;
+
+ reg = read_p15_c1 ();
+ cp_delay ();
+ write_p15_c1 (reg & ~C1_IC);
+}
+
+int icache_status (void)
+{
+ return (read_p15_c1 () & C1_IC) != 0;
+}
+
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm946es.h>
+#include <asm/proc-armv/ptrace.h>
+
+#define TIMER_LOAD_VAL 0xffffffff
+extern void reset_cpu(ulong addr);
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+ unsigned long temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "bic %0, %0, #0x80\n"
+ "msr cpsr_c, %0"
+ : "=r" (temp)
+ :
+ : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ unsigned long old,temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+ return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+ panic ("Resetting CPU ...\n");
+ reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ unsigned long flags;
+ const char *processor_modes[] = {
+ "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+ "UK4_26", "UK5_26", "UK6_26", "UK7_26",
+ "UK8_26", "UK9_26", "UK10_26", "UK11_26",
+ "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+ "UK4_32", "UK5_32", "UK6_32", "ABT_32",
+ "UK8_32", "UK9_32", "UK10_32", "UND_32",
+ "UK12_32", "UK13_32", "UK14_32", "SYS_32",
+ };
+
+ flags = condition_codes (regs);
+
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ instruction_pointer (regs),
+ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+ printf ("Flags: %c%c%c%c",
+ flags & CC_N_BIT ? 'N' : 'n',
+ flags & CC_Z_BIT ? 'Z' : 'z',
+ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ printf (" IRQs %s FIQs %s Mode %s%s\n",
+ interrupts_enabled (regs) ? "on" : "off",
+ fast_interrupts_enabled (regs) ? "on" : "off",
+ processor_modes[processor_mode (regs)],
+ thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+ printf ("undefined instruction\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+ printf ("software interrupt\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+ printf ("prefetch abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+ printf ("data abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+ printf ("not used\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+ printf ("fast interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+ printf ("interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+#ifdef CONFIG_INTEGRATOR
+ /* Timer functionality supplied by Integrator board (AP or CP) */
+#else
+
+static ulong timestamp;
+static ulong lastdec;
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int interrupt_init (void)
+{
+ /* init the timestamp and lastdec value */
+ reset_timer_masked();
+
+ return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+ return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+ timestamp = t;
+}
+
+/* delay x useconds AND perserve advance timstamp value */
+void udelay(unsigned long usec)
+{
+ udelay_masked(usec);
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER; /* capure current decrementer value time */
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_raw (void)
+{
+ ulong now = READ_TIMER; /* current tick value */
+
+ if (lastdec >= now) { /* normal mode (non roll) */
+ /* normal mode */
+ timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
+ } else { /* we have overflow of the count down timer */
+ /* nts = ts + ld + (TLV - now)
+ * ts=old stamp, ld=time that passed before passing through -1
+ * (TLV-now) amount of time after passing though -1
+ * nts = new "advancing time stamp"...it could also roll and cause problems.
+ */
+ timestamp += lastdec + TIMER_LOAD_VAL - now;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+ulong get_timer_masked (void)
+{
+ return get_timer_raw() / TIMER_LOAD_VAL;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+ ulong tmo;
+
+ if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
+ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
+ tmo *= CFG_HZ_CLOCK; /* find number of "ticks" to wait to achieve target */
+ tmo /= 1000; /* finish normalize. */
+ }else{ /* else small number, don't kill it prior to HZ multiply */
+ tmo = usec * CFG_HZ_CLOCK;
+ tmo /= (1000*1000);
+ }
+
+ reset_timer_masked (); /* set "advancing" timestamp to 0, set lastdec vaule */
+
+ while (get_timer_raw () < tmo) /* wait for time stamp to overtake tick number.*/
+ /*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+
+ tbclk = CFG_HZ;
+ return tbclk;
+}
+
+#endif /* CONFIG_INTEGRATOR */
--- /dev/null
+/*
+ * armboot - Startup Code for ARM926EJS CPU-core
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:
+ b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction:
+ .word undefined_instruction
+_software_interrupt:
+ .word software_interrupt
+_prefetch_abort:
+ .word prefetch_abort
+_data_abort:
+ .word data_abort
+_not_used:
+ .word not_used
+_irq:
+ .word irq
+_fiq:
+ .word fiq
+
+ .balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+ .word __bss_start
+
+.globl _bss_end
+_bss_end:
+ .word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifdef CONFIG_INIT_CRITICAL
+ bl cpu_init_crit
+#endif
+
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ cmp r0, r1 /* don't reloc during debug */
+ beq stack_setup
+
+ ldr r2, _armboot_start
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+
+ /* Set up the stack */
+stack_setup:
+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+#ifdef CONFIG_USE_IRQ
+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+clear_bss:
+ ldr r0, _bss_start /* find start of bss segment */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ bne clbss_l
+
+ ldr pc, _start_armboot
+
+_start_armboot:
+ .word start_armboot
+
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 /* flush v4 I-cache */
+ mcr p15, 0, r0, c7, c6, 0 /* flush v4 D-cache */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
+ bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
+ orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
+ orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
+ mcr p15, 0, r0, c1, c0, 0
+
+ /*
+ * Go setup Memory and board specific bits prior to relocation.
+ */
+ mov ip, lr /* perserve link reg across call */
+ bl platformsetup /* go setup memory */
+ mov lr, ip /* restore link */
+ mov pc, lr /* back to my caller */
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ @ carve out a frame on current user stack
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+
+ ldr r2, _armboot_start
+ sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+ sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ @ get values for "aborted" pc and cpsr (into parm regs)
+ ldmia r2, {r2 - r3}
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, _armboot_start @ setup our mode stack
+ sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+ sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+
+# ifdef CONFIG_INTEGRATOR
+
+ /* Satisfied by general board level routine */
+
+#else
+
+ .align 5
+.globl reset_cpu
+reset_cpu:
+
+ ldr r1, rstctl1 /* get clkm1 reset ctl */
+ mov r3, #0x0
+ strh r3, [r1] /* clear it */
+ mov r3, #0x8
+ strh r3, [r1] /* force dsp+arm reset */
+_loop_forever:
+ b _loop_forever
+
+rstctl1:
+ .word 0xfffece10
+
+#endif /* #ifdef CONFIG_INTEGRATOR */
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(CPU).a
+
+START = start.o
+OBJS = interrupts.o cpu.o
+
+all: .depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
+ -msoft-float
+
+PLATFORM_CPPFLAGS += -march=armv4
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CPU specific code for an unknown cpu
+ * - hence fairly empty......
+ */
+
+#include <common.h>
+#include <command.h>
+
+int cpu_init (void)
+{
+ /*
+ * setup up stacks if necessary
+ */
+#ifdef CONFIG_USE_IRQ
+ DECLARE_GLOBAL_DATA_PTR;
+
+ IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+ FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
+#endif
+ return 0;
+}
+
+int cleanup_before_linux (void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ disable_interrupts ();
+
+ /* Since the CM has unknown processor we do not support
+ * cache operations
+ */
+
+ return (0);
+}
+
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ extern void reset_cpu (ulong addr);
+
+ disable_interrupts ();
+ reset_cpu (0);
+ /*NOTREACHED*/
+ return (0);
+}
+
+/* May not be cahed processor on the CM - do nothing */
+void icache_enable (void)
+{
+}
+
+void icache_disable (void)
+{
+}
+
+/* return "disabled" */
+int icache_status (void)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/proc-armv/ptrace.h>
+
+#ifndef CONFIG_INTEGRATOR
+/* Only to be used for integrator/AP or /CP */
+/* Allows U-Boot to be used with any ARM supplied core module (CM),
+ * provided the ARM boot monitor, or similar software,
+ * runs first to set up the platform e.g. map writeable memory to 0x00000000
+ * - see Integrator User Guides
+ * Versatile has a supported cpu - arm926ejs
+ * Some integrator CMs cpus are supported
+ * CM926EJ-S, CM946E-S
+ * For platforms with supported cpus U-Boot can be used as the sole boot
+ * monitor/loader - it will configure the platform itself
+ * Also U-Boot may be faster/smaller in those cases since specific
+ * qualities of the cpu and/or CM can be used e.g i and/or d caches etc.
+ */
+#endif
+extern void reset_cpu(ulong addr);
+
+#ifdef CONFIG_USE_IRQ
+/* enable IRQ interrupts */
+void enable_interrupts (void)
+{
+ unsigned long temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "bic %0, %0, #0x80\n"
+ "msr cpsr_c, %0"
+ : "=r" (temp)
+ :
+ : "memory");
+}
+
+
+/*
+ * disable IRQ/FIQ interrupts
+ * returns true if interrupts had been enabled before we disabled them
+ */
+int disable_interrupts (void)
+{
+ unsigned long old,temp;
+ __asm__ __volatile__("mrs %0, cpsr\n"
+ "orr %1, %0, #0xc0\n"
+ "msr cpsr_c, %1"
+ : "=r" (old), "=r" (temp)
+ :
+ : "memory");
+ return (old & 0x80) == 0;
+}
+#else
+void enable_interrupts (void)
+{
+ return;
+}
+int disable_interrupts (void)
+{
+ return 0;
+}
+#endif
+
+
+void bad_mode (void)
+{
+ panic ("Resetting CPU ...\n");
+ reset_cpu (0);
+}
+
+void show_regs (struct pt_regs *regs)
+{
+ unsigned long flags;
+ const char *processor_modes[] = {
+ "USER_26", "FIQ_26", "IRQ_26", "SVC_26",
+ "UK4_26", "UK5_26", "UK6_26", "UK7_26",
+ "UK8_26", "UK9_26", "UK10_26", "UK11_26",
+ "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32", "IRQ_32", "SVC_32",
+ "UK4_32", "UK5_32", "UK6_32", "ABT_32",
+ "UK8_32", "UK9_32", "UK10_32", "UND_32",
+ "UK12_32", "UK13_32", "UK14_32", "SYS_32",
+ };
+
+ flags = condition_codes (regs);
+
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
+ instruction_pointer (regs),
+ regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
+ printf ("Flags: %c%c%c%c",
+ flags & CC_N_BIT ? 'N' : 'n',
+ flags & CC_Z_BIT ? 'Z' : 'z',
+ flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ printf (" IRQs %s FIQs %s Mode %s%s\n",
+ interrupts_enabled (regs) ? "on" : "off",
+ fast_interrupts_enabled (regs) ? "on" : "off",
+ processor_modes[processor_mode (regs)],
+ thumb_mode (regs) ? " (T)" : "");
+}
+
+void do_undefined_instruction (struct pt_regs *pt_regs)
+{
+ printf ("undefined instruction\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_software_interrupt (struct pt_regs *pt_regs)
+{
+ printf ("software interrupt\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_prefetch_abort (struct pt_regs *pt_regs)
+{
+ printf ("prefetch abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_data_abort (struct pt_regs *pt_regs)
+{
+ printf ("data abort\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_not_used (struct pt_regs *pt_regs)
+{
+ printf ("not used\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_fiq (struct pt_regs *pt_regs)
+{
+ printf ("fast interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+void do_irq (struct pt_regs *pt_regs)
+{
+ printf ("interrupt request\n");
+ show_regs (pt_regs);
+ bad_mode ();
+}
+
+/* The timer functionality is supplied by the Integrator board */
+/* - see board/integrator<>.c */
--- /dev/null
+/*
+ * armboot - Startup Code for ARM926EJS CPU-core
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table
+ *
+ *************************************************************************
+ */
+
+.globl _start
+_start:
+ b reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction:
+ .word undefined_instruction
+_software_interrupt:
+ .word software_interrupt
+_prefetch_abort:
+ .word prefetch_abort
+_data_abort:
+ .word data_abort
+_not_used:
+ .word not_used
+_irq:
+ .word irq
+_fiq:
+ .word fiq
+
+ .balignl 16,0xdeadbeef
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+_TEXT_BASE:
+ .word TEXT_BASE /* address of _start in the linked image */
+
+.globl _armboot_start
+_armboot_start:
+ .word _start
+
+/*
+ * These are defined in the board-specific linker script.
+ */
+.globl _bss_start
+_bss_start:
+ .word __bss_start
+
+.globl _bss_end
+_bss_end:
+ .word _end
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+
+/*
+ * the actual reset code
+ */
+.globl reset
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifdef CONFIG_INIT_CRITICAL
+ bl cpu_init_crit
+#endif
+
+relocate: /* relocate U-Boot to RAM */
+ adr r0, _start /* pc relative address of label */
+ ldr r1, _TEXT_BASE /* linked image address of label */
+ cmp r0, r1 /* test if we run from flash or RAM */
+ beq stack_setup /* ifeq we are in the RAM copy */
+
+ ldr r2, _armboot_start
+ ldr r3, _bss_start
+ sub r2, r3, r2 /* r2 <- size of armboot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ ble copy_loop
+
+ /* Set up the stack */
+stack_setup:
+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
+#ifdef CONFIG_USE_IRQ
+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
+#endif
+ sub sp, r0, #12 /* leave 3 words for abort-stack */
+
+clear_bss:
+ ldr r0, _bss_start /* find start of bss segment */
+ ldr r1, _bss_end /* stop here */
+ mov r2, #0x00000000 /* clear */
+
+clbss_l:str r2, [r0] /* clear loop... */
+ add r0, r0, #4
+ cmp r0, r1
+ ble clbss_l
+
+ ldr pc, _start_armboot
+
+_start_armboot:
+ .word start_armboot
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+
+cpu_init_crit:
+ /* arm_int_generic assumes the ARM boot monitor, or user software,
+ * has initialized the platform
+ */
+ mov pc, lr /* back to my caller */
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ @ carve out a frame on current user stack
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+
+ ldr r2, _armboot_start
+ sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+ sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
+ @ get values for "aborted" pc and cpsr (into parm regs)
+ ldmia r2, {r2 - r3}
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, _armboot_start @ setup our mode stack
+ sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
+ sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+ .align 5
+.globl undefined_instruction
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+.globl software_interrupt
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+.globl prefetch_abort
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+.globl data_abort
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+.globl not_used
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+ .align 5
+.globl irq
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+.globl fiq
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+.globl irq
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+.globl fiq
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
--- /dev/null
+
+ U-Boot for ARM Integrator Development Platforms
+
+ Peter Pearse, ARM Ltd.
+ peter.pearse@arm.com
+ www.arm.com
+
+Manuals available from :-
+http://www.arm.com/products/DevTools/Hardware_Platforms.html
+
+Overview :
+--------
+There are two Integrator variants - Integrator/AP and Integrator/CP.
+Each may be fitted with a variety of core modules (CMs).
+Each CM consists of a ARM processor core and associated hardware e.g
+ FPGA implementing various controllers and/or register
+ SSRAM
+ SDRAM
+ RAM controllers
+ clock generators etc.
+
+Boot Methods :
+------------
+Integrator platforms can be configured to use U-Boot in at least three ways :-
+a) Run ARM boot monitor, manually run U-Boot image from flash
+b) Run ARM boot monitor, automatically run U-Boot image from flash
+c) Run U-Boot image direct from flash.
+
+In cases a) and b) the ARM boot monitor will have configured the CM and mapped
+writeable memory to 0x00000000 in the Integrator address space.
+U-Boot has to carry out minimal configration before standard code is run.
+
+In case c) it may be necessary for U-Boot to perform CM dependent initialization.
+
+Configuring U-Boot :
+------------------
+ The makefile contains targets for Integrator platforms of both types
+fitted with all current variants of CM. If these targets are to be used with
+boot process c) above then CONFIG_INIT_CRITICAL may need to be defined to ensure
+that the CM is correctly configured.
+
+ There are also targets independent of CM. These may not be suitable for
+boot process c) above. They have been preserved for backward compatibility with
+existing build processes.
+
+Code Hierarchy Applied :
+----------------------
+Code specific to initialization of a particular ARM processor has been placed in
+cpu/arm<>/start.S so that it may be used by other boards.
+
+However, to avoid duplicating code through all processor files, a generic core
+for ARM Integrator CMs has been added
+
+ cpu/arm_intcm
+
+Otherwise. for example, the standard CM reset via the CM control register would
+need placing in each CM processor file......
+
+Code specific to the initialization of the CM, rather than the cpu, and initialization
+of the Integrator board itself, has been placed in
+
+ board/integrator<>/platform.S
+ board/integrator<>/integrator<>.c
+
+
+
--- /dev/null
+/************************************************
+ * NAME arm946es.h *
+ * $Version$ *
+ ************************************************/
+/* Currently empty */
+#ifndef __ARM946ES_H__
+#define __ARM946ES_H__
+#endif /*__ARM946ES_H__*/
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-
+
#ifndef __CONFIG_H
#define __CONFIG_H
-
/*
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#define CONFIG_INTEGRATOR 1 /* in an Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */
-
-
-#define CFG_MEMTEST_START 0x100000
-#define CFG_MEMTEST_END 0x10000000
-#define CFG_HZ (1000000 / 256) /* Timer 1 is clocked at 1Mhz, with 256 divider */
-#define CFG_TIMERBASE 0x13000100
+#define CFG_MEMTEST_START 0x100000
+#define CFG_MEMTEST_END 0x10000000
+#define CFG_HZ 1000
+#define CFG_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
+#define CFG_TIMERBASE 0x13000100 /* Timer1 */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#define CFG_MAX_FLASH_SECT 128
#define CFG_ENV_SIZE 32768
* PCI definitions
*/
-/*#define CONFIG_PCI /--* include pci support */
+/*#define CONFIG_PCI /--* include pci support */
#undef CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define DEBUG
#define INTEGRATOR_SC_PCIENABLE \
(INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+/*-----------------------------------------------------------------------
+ * There are various dependencies on the core module (CM) fitted
+ * Users should refer to their CM user guide
+ * - when porting adjust u-boot/Makefile accordingly
+ * to define the necessary CONFIG_ s for the CM involved
+ * see e.g. integratorcp_CM926EJ-S_config
+ */
+
+#define CM_BASE 0x10000000
+
+/* CM registers common to all integrator/CP CMs */
+#define OS_CTRL 0x0000000C
+#define CMMASK_REMAP 0x00000005 /* Set remap & led */
+#define CMMASK_RESET 0x00000008
+#define OS_LOCK 0x00000014
+#define CMVAL_LOCK 0x0000A000 /* Locking value */
+#define CMMASK_LOCK 0x0000005F /* Locking value */
+#define CMVAL_UNLOCK 0x00000000 /* Any value != CM_LOCKVAL */
+#define OS_SDRAM 0x00000020
+#define OS_INIT 0x00000024
+#define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */
+#define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */
+
+#ifdef CONFIG_CM_SPD_DETECT
+#define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */
+#endif
#endif /* __CONFIG_H */
* High Level Configuration Options
* (easy to change)
*/
-#if 1
-#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */
-#else
-#define CONFIG_ARM946ES 1 /* This is an arm946es CPU core */
-#endif
-#define CONFIG_INTEGRATOR 1 /* in an Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Specifically, a CP */
-
-
-#define CFG_MEMTEST_START 0x100000
-#define CFG_MEMTEST_END 0x10000000
-#define CFG_HZ (1000000 / 256) /* Timer 1 is clocked at 1Mhz, with 256 divider */
-#define CFG_TIMERBASE 0x13000100
+#define CFG_MEMTEST_START 0x100000
+#define CFG_MEMTEST_END 0x10000000
+#define CFG_HZ 1000
+#define CFG_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
+#define CFG_TIMERBASE 0x13000100
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
/*
* Size of malloc() pool
*/
#define CONFIG_BOOTCOMMAND "bootp ; bootm"
#endif
+/* Flash loaded
+ - U-Boot
+ - u-linux
+ - system.cramfs
+*/
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0, \
+0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "cp 0x24040000 0x7fc0 0x80000; bootm"
+
/*
* Miscellaneous configurable options
*/
#define CFG_MAX_FLASH_SECT 64
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
-#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#define CFG_MONITOR_BASE 0x24F40000
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_SECT_SIZE 0x40000 /* 256KB */
#define CFG_ENV_SIZE 8192 /* 8KB */
+/*-----------------------------------------------------------------------
+ * There are various dependencies on the core module (CM) fitted
+ * Users should refer to their CM user guide
+ * - when porting adjust u-boot/Makefile accordingly
+ * to define the necessary CONFIG_ s for the CM involved
+ * see e.g. integratorcp_CM926EJ-S_config
+ */
+
+#define CM_BASE 0x10000000
+
+/* CM registers common to all integrator/CP CMs */
+#define OS_CTRL 0x0000000C
+#define CMMASK_REMAP 0x00000005 /* set remap & led */
+#define CMMASK_RESET 0x00000008
+#define OS_LOCK 0x00000014
+#define CMVAL_LOCK 0x0000A000 /* locking value */
+#define CMMASK_LOCK 0x0000005F /* locking value */
+#define CMVAL_UNLOCK 0x00000000 /* any value != CM_LOCKVAL */
+#define OS_SDRAM 0x00000020
+#define OS_INIT 0x00000024
+#define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */
+#define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */
+#define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */
+#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
+#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual
+ * - PLL test clock bypassed
+ * - bus clock ratio 2
+ * - little endian
+ * - vectors at zero
+ */
+#endif /* CM1022xx */
+
+#define CMMASK_LE 0x00000008 /* little endian */
+#define CMMASK_CMxx6_COMMON 0x00000100 /* Common value for CMxx6
+ * - divisor/ratio b00000001
+ * bx
+ * - HCLKDIV b000
+ * bxx
+ * - PLL BYPASS b00
+ */
+
+/* Determine CM characteristics */
+
+#undef CONFIG_CM_MULTIPLE_SSRAM
+#undef CONFIG_CM_SPD_DETECT
+#undef CONFIG_CM_REMAP
+#undef CONFIG_CM_INIT
+#undef CONFIG_CM_TCRAM
+
+#if defined (CONFIG_CM946E_S) || defined (CONFIG_CM966E_S)
+#define CONFIG_CM_MULTIPLE_SSRAM /* CM has multiple SSRAM mapping */
+#endif
+
+#ifndef CONFIG_CM922t_XA10
+#define CONFIG_CM_SPD_DETECT /* CM supports SPD query */
+#define OS_SPD 0x00000100 /* Address of SPD data */
+#define CONFIG_CM_REMAP /* CM supports remapping */
+#define CONFIG_CM_INIT /* CM has initialization reg */
+#endif
+
+#if defined(CONFIG_CM926EJ_S) || defined (CONFIG_CM946E_S) || \
+ defined(CONFIG_CM966E_S) || defined (CONFIG_CM1026EJ_S) || \
+ defined(CONFIG_CM1136JF_S)
+#define CONFIG_CM_TCRAM /* CM has TCRAM */
+#endif
+
#endif /* __CONFIG_H */
projects / u-boot / commitdiff