]> git.sur5r.net Git - u-boot/commitdiff
mx6sabresd: Add fastboot support
authorFabio Estevam <fabio.estevam@nxp.com>
Mon, 29 Jan 2018 13:11:57 +0000 (11:11 -0200)
committerStefano Babic <sbabic@denx.de>
Sun, 4 Feb 2018 11:14:10 +0000 (12:14 +0100)
fastboot tool is a convenient way to flash the eMMC, so
add support for it.

Examples of usages:

On the mx6sabresd:

=> fastboot 0

On the Linux PC connected via USB:

$ sudo fastboot getvar bootloader-version -i 0x0525
bootloader-version: U-Boot 2018.01-00550-g7517cfe
finished. total time: 0.000s

$ sudo fastboot reboot -i 0x0525

(this causes the mx6sabresd to reboot)

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
configs/mx6sabresd_defconfig

index f6a53d6ae4c46945fb47e4c0ad79b09e52fcfd31..feb385d4a5b0658cb1a1a6c3eb77095755fb91d0 100644 (file)
@@ -20,6 +20,12 @@ CONFIG_SPL_USB_HOST_SUPPORT=y
 CONFIG_SPL_USB_GADGET_SUPPORT=y
 CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_USB_DEV=0
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=2
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_SPL=y
 CONFIG_CMD_SPL_WRITE_SIZE=0x20000