]> git.sur5r.net Git - u-boot/commitdiff
usb: xhci: keystone: Remove common dwc3 drv functions calls
authorRamneek Mehresh <ramneek.mehresh@freescale.com>
Fri, 29 May 2015 09:17:18 +0000 (14:47 +0530)
committerMarek Vasut <marex@denx.de>
Wed, 22 Jul 2015 06:55:44 +0000 (08:55 +0200)
Remove all redundant dwc3 driver function calls that
are defined by dwc3 driver

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
drivers/usb/host/xhci-keystone.c
include/configs/ks2_evm.h

index 05d338f261cd38f78e346b94b93b2c6b57fa2e89..924fb7616ffa2298d3d07b464b7072d01ffe9d8c 100644 (file)
@@ -68,94 +68,6 @@ static void keystone_xhci_phy_unset(struct keystone_xhci_phy *phy)
        writel(val, &phy->phy_clock);
 }
 
-static void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
-{
-       clrsetbits_le32(&dwc3_reg->g_ctl,
-                       DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
-                       DWC3_GCTL_PRTCAPDIR(mode));
-}
-
-static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
-{
-       /* Before Resetting PHY, put Core in Reset */
-       setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
-
-       /* Assert USB3 PHY reset */
-       setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
-
-       /* Assert USB2 PHY reset */
-       setbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST);
-
-       mdelay(100);
-
-       /* Clear USB3 PHY reset */
-       clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
-
-       /* Clear USB2 PHY reset */
-       clrbits_le32(&dwc3_reg->g_usb2phycfg[0], DWC3_GUSB2PHYCFG_PHYSOFTRST);
-
-       /* After PHYs are stable we can take Core out of reset state */
-       clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
-}
-
-static int dwc3_core_init(struct dwc3 *dwc3_reg)
-{
-       u32 revision, val;
-       unsigned long t_rst;
-       unsigned int dwc3_hwparams1;
-
-       revision = readl(&dwc3_reg->g_snpsid);
-       /* This should read as U3 followed by revision number */
-       if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
-               puts("this is not a DesignWare USB3 DRD Core\n");
-               return -EINVAL;
-       }
-
-       /* issue device SoftReset too */
-       writel(DWC3_DCTL_CSFTRST, &dwc3_reg->d_ctl);
-
-       t_rst = get_timer(0);
-       do {
-               val = readl(&dwc3_reg->d_ctl);
-               if (!(val & DWC3_DCTL_CSFTRST))
-                       break;
-               WATCHDOG_RESET();
-       } while (get_timer(t_rst) < 500);
-
-       if (val & DWC3_DCTL_CSFTRST) {
-               debug("Reset timed out\n");
-               return -2;
-       }
-
-       dwc3_core_soft_reset(dwc3_reg);
-
-       dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
-
-       val = readl(&dwc3_reg->g_ctl);
-       val &= ~DWC3_GCTL_SCALEDOWN_MASK;
-       val &= ~DWC3_GCTL_DISSCRAMBLE;
-       switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
-       case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
-               val &= ~DWC3_GCTL_DSBLCLKGTNG;
-               break;
-       default:
-               printf("No power optimization available\n");
-       }
-
-       /*
-        * WORKAROUND: DWC3 revisions <1.90a have a bug
-        * where the device can fail to connect at SuperSpeed
-        * and falls back to high-speed mode which causes
-        * the device to enter a Connect/Disconnect loop
-        */
-       if ((revision & DWC3_REVISION_MASK) < 0x190a)
-               val |= DWC3_GCTL_U2RSTECN;
-
-       writel(val, &dwc3_reg->g_ctl);
-
-       return 0;
-}
-
 static int keystone_xhci_core_init(struct dwc3 *dwc3_reg)
 {
        int ret;
index e05d56cd82621a63597bb7db1ec5277f96b5b4c6..eb4bcaf3bee0f06cbd7c37d9ea9c0dea40724075 100644 (file)
 
 /* USB Configuration */
 #define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_XHCI_KEYSTONE
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
 #define CONFIG_USB_STORAGE