Changes for U-Boot 1.1.1:
======================================================================
+* Patch by Dan Malek, 07 Apr 2004:
+ - Add support for RPC/STx GP3, Motorola 8560 board
+ - Update 85xx TSEC driver so it searches MII for first available PHY
+ and uses that one.
+ - Add functions to support console MII commands.
+
+* Patch by Tolunay Orkun, 07 Apr 2004:
+ Move initialization of bi_iic_fast[]
+ from board_init_f() to board_init_r()
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ Cleanup microblaze port
+
+* Patch by Sangmoon Kim, 07 Apr 2004:
+ Add auto SDRAM module detection for Debris board
+
* Patch by Rune Torgersen, 06 Apr 2004:
- Fix some PCI problems on the MPC8266ADS board
- Fix the location of some PCI entries in the immap structure
MPC8540ADS MPC8540
MPC8560ADS MPC8560
+Dan Malek <dan@embeddededge.com>
+
+ STxGP3 MPC85xx
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
#########################################################################
LIST_85xx=" \
- MPC8540ADS MPC8560ADS \
+ MPC8540ADS MPC8560ADS stxgp3 \
"
#########################################################################
CU824_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x cu824
+debris_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x debris etin
+
eXalion_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x eXalion
MPC8560ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
+stxgp3_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+
#########################################################################
## 74xx/7xx Systems
#########################################################################
DB64460_config: unconfig
@./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
-debris_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x debris etin
-
ELPPC_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
CONFIG_RPXlite, CONFIG_RPXsuper, CONFIG_rsdproto,
CONFIG_sacsng, CONFIG_Sandpoint8240, CONFIG_Sandpoint8245,
CONFIG_sbc8260, CONFIG_SM850, CONFIG_SPD823TS,
- CONFIG_SXNI855T, CONFIG_TQM823L, CONFIG_TQM8260,
- CONFIG_TQM850L, CONFIG_TQM855L, CONFIG_TQM860L,
- CONFIG_TTTech, CONFIG_UTX8245, CONFIG_V37,
- CONFIG_W7OLMC, CONFIG_W7OLMG, CONFIG_WALNUT405,
- CONFIG_ZPC1900, CONFIG_ZUMA,
+ CONFIG_STXGP3, CONFIG_SXNI855T, CONFIG_TQM823L,
+ CONFIG_TQM8260, CONFIG_TQM850L, CONFIG_TQM855L,
+ CONFIG_TQM860L, CONFIG_TTTech, CONFIG_UTX8245,
+ CONFIG_V37, CONFIG_W7OLMC, CONFIG_W7OLMG,
+ CONFIG_WALNUT405, CONFIG_ZPC1900, CONFIG_ZUMA,
ARM based boards:
-----------------
QS850_config QS860T_config RPXlite_config
RPXsuper_config rsdproto_config Sandpoint8240_config
sbc8260_config SM850_config SPD823TS_config
- SXNI855T_config TQM823L_config TQM850L_config
- TQM855L_config TQM860L_config WALNUT405_config
- ZPC1900_config
+ stxgp3_config SXNI855T_config TQM823L_config
+ TQM850L_config TQM855L_config TQM860L_config
+ WALNUT405_config ZPC1900_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
#include <common.h>
-void board_init(void)
-{
- serial_init();
-
- main_loop();
-}
-
void do_reset(void)
{
}
#include <common.h>
#include <mpc824x.h>
#include <pci.h>
+#include <i2c.h>
int checkboard (void)
{
long int initdram (int board_type)
{
- long size;
-#if 0
- long new_bank0_end;
- long mear1;
- long emear1;
-#endif
-
- size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
-
-#if 0
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-#endif
+ int m, row, col, bank, i;
+ unsigned long start, end;
+ uint32_t mccr1;
+ uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
+ uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
+ uint8_t mber = 0;
+
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ if (i2c_reg_read (0x50, 2) != 0x04) return 0; /* Memory type */
+ m = i2c_reg_read (0x50, 5); /* # of physical banks */
+ row = i2c_reg_read (0x50, 3); /* # of rows */
+ col = i2c_reg_read (0x50, 4); /* # of columns */
+ bank = i2c_reg_read (0x50, 17); /* # of logical banks */
+
+ CONFIG_READ_WORD(MCCR1, mccr1);
+ mccr1 &= 0xffff0000;
+
+ start = CFG_SDRAM_BASE;
+ end = start + (1 << (col + row + 3) ) * bank - 1;
+
+ for (i = 0; i < m; i++) {
+ mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
+ if (i < 4) {
+ msar1 |= ((start >> 20) & 0xff) << i * 8;
+ emsar1 |= ((start >> 28) & 0xff) << i * 8;
+ mear1 |= ((end >> 20) & 0xff) << i * 8;
+ emear1 |= ((end >> 28) & 0xff) << i * 8;
+ } else {
+ msar2 |= ((start >> 20) & 0xff) << (i-4) * 8;
+ emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
+ mear2 |= ((end >> 20) & 0xff) << (i-4) * 8;
+ emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
+ }
+ mber |= 1 << i;
+ start += (1 << (col + row + 3) ) * bank;
+ end += (1 << (col + row + 3) ) * bank;
+ }
+ for (; i < 8; i++) {
+ if (i < 4) {
+ msar1 |= 0xff << i * 8;
+ emsar1 |= 0x30 << i * 8;
+ mear1 |= 0xff << i * 8;
+ emear1 |= 0x30 << i * 8;
+ } else {
+ msar2 |= 0xff << (i-4) * 8;
+ emsar2 |= 0x30 << (i-4) * 8;
+ mear2 |= 0xff << (i-4) * 8;
+ emear2 |= 0x30 << (i-4) * 8;
+ }
+ }
- return (size);
+ CONFIG_WRITE_WORD(MCCR1, mccr1);
+ CONFIG_WRITE_WORD(MSAR1, msar1);
+ CONFIG_WRITE_WORD(EMSAR1, emsar1);
+ CONFIG_WRITE_WORD(MEAR1, mear1);
+ CONFIG_WRITE_WORD(EMEAR1, emear1);
+ CONFIG_WRITE_WORD(MSAR2, msar2);
+ CONFIG_WRITE_WORD(EMSAR2, emsar2);
+ CONFIG_WRITE_WORD(MEAR2, mear2);
+ CONFIG_WRITE_WORD(EMEAR2, emear2);
+ CONFIG_WRITE_BYTE(MBER, mber);
+
+ return (1 << (col + row + 3) ) * bank * m;
}
/*
--- /dev/null
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o flash.o
+SOBJS := init.o
+#SOBJS :=
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,2003 Motorola Inc.
+#
+# Copied from ADS85xx for STx GP3 - Dan Malek
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
--- /dev/null
+/*
+ * (C) Copyright 2003, Dan Malek, Embedded Edge, LLC. <dan@embeddededge.com>
+ * Copied from ADS85xx.
+ * Updated to support the Silicon Tx GP3 8560. We should only find
+ * two Intel 28F640 parts in 16-bit mode (i.e. 32-bit wide flash),
+ * but I left other code here in case people order custom boards.
+ *
+ * (C) Copyright 2003 Motorola Inc.
+ * Xianghua Xiao,(X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if !defined(CFG_NO_FLASH)
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+#undef DEBUG
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+
+ /* Init: enable write,
+ * or we cannot even write flash commands
+ */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ /* set the default sector offset */
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+ }
+
+ /* Re-do sizing to get full correct info */
+ size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_info[0].size = size;
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+monitor_flash_len-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+ &flash_info[0]);
+#endif
+#endif
+ return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL: printf ("Intel "); break;
+ case FLASH_MAN_SHARP: printf ("Sharp "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F640C3T: printf ("28F640C3T (64 Mbit x 2, 128 x 128k)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ ulong value;
+ ulong base = (ulong)addr;
+ ulong sector_offset;
+
+#ifdef DEBUG
+ printf("Check flash at 0x%08x\n",(uint)addr);
+#endif
+ /* Write "Intelligent Identifier" command: read Manufacturer ID */
+ *addr = 0x90909090;
+ udelay(20);
+ asm("sync");
+
+ value = addr[0] & 0x00FF00FF;
+
+#ifdef DEBUG
+ printf("manufacturer=0x%x\n",(uint)value);
+#endif
+ switch (value) {
+ case MT_MANUFACT: /* SHARP, MT or => Intel */
+ case INTEL_ALT_MANU:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ default:
+ printf("unknown manufacturer: %x\n", (unsigned int)value);
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+#ifdef DEBUG
+ printf("deviceID=0x%x\n",(uint)value);
+#endif
+ switch (value) {
+
+ case (INTEL_ID_28F640C3T):
+ info->flash_id += FLASH_28F640C3T;
+ info->sector_count = 135;
+ info->size = 0x01000000;
+ sector_offset = 0x20000;
+ break; /* => 2x8 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table
+ * The first 127 blocks are large, the last 8 are small.
+ */
+ for (i = 0; i < 127; i++) {
+ info->start[i] = base;
+ base += sector_offset;
+ /* Sectors are locked upon reset */
+ info->protect[i] = 0;
+ }
+ for (i = 127; i < 135; i++) {
+ info->start[i] = base;
+ base += 0x4000;
+ /* Sectors are locked upon reset */
+ info->protect[i] = 0;
+ }
+
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (vu_long *)info->start[0];
+ *addr = 0xFFFFFF; /* reset bank to read array mode */
+ asm("sync");
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+ && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+#ifdef DEBUG
+ printf("\nFlash Erase:\n");
+#endif
+ /* Make Sure Block Lock Bit is not set. */
+ if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+ return 1;
+ }
+
+ /* Start erase on unprotected sectors */
+#if defined(DEBUG)
+ printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
+#endif
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+ asm("sync");
+
+ last = start = get_timer (0);
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ asm("sync");
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ asm("sync");
+ /* Single Block Erase Command */
+ *addr = 0x20202020;
+ asm("sync");
+ /* Confirm */
+ *addr = 0xD0D0D0D0;
+ asm("sync");
+
+ if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+ /* Resume Command, as per errata update */
+ *addr = 0xD0D0D0D0;
+ asm("sync");
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+ while ((*addr & 0x00800080) != 0x00800080) {
+ if(*addr & 0x00200020){
+ printf("Error in Block Erase - Lock Bit may be set!\n");
+ printf("Status Register = 0x%X\n", (uint)*addr);
+ *addr = 0xFFFFFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ /* reset to read mode */
+ *addr = 0xFFFFFFFF;
+ asm("sync");
+ }
+ }
+
+ printf ("flash erase done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i=0; i<4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start, csr;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ /* Write Command */
+ *addr = 0x10101010;
+ asm("sync");
+
+ /* Write Data */
+ *addr = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ flag = 0;
+
+ while (((csr = *addr) & 0x00800080) != 0x00800080) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ flag = 1;
+ break;
+ }
+ }
+ if (csr & 0x40404040) {
+ printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+ flag = 1;
+ }
+
+ /* Clear Status Registers Command */
+ *addr = 0x50505050;
+ asm("sync");
+ /* Reset to read array mode */
+ *addr = 0xFFFFFFFF;
+ asm("sync");
+
+ return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long * addr)
+{
+ ulong start, now;
+
+ /* Reset Array */
+ *addr = 0xffffffff;
+ asm("sync");
+ /* Clear Status Register */
+ *addr = 0x50505050;
+ asm("sync");
+
+ *addr = 0x60606060;
+ asm("sync");
+ *addr = 0xd0d0d0d0;
+ asm("sync");
+
+ start = get_timer (0);
+ while((*addr & 0x00800080) != 0x00800080){
+ if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout on clearing Block Lock Bit\n");
+ *addr = 0xFFFFFFFF; /* reset bank */
+ asm("sync");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+#endif /* !CFG_NO_FLASH */
--- /dev/null
+/*
+ * Copyright (C) 2003 Embedded Edge, LLC
+ * Dan Malek <dan@embeddededge.com>
+ * Copied from ADS85xx.
+ * Updates for Silicon Tx GP3 8560. We only support 32-bit flash
+ * and DDR with SPD EEPROM configuration.
+ *
+ * Copyright (C) 2002,2003, Motorola Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+/* TLB1 entries configuration: */
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ /* If RAMBOOT, we are testing and the BDI has set up
+ * much of the MMU already.
+ * TLB 4,5 SDRAM
+ * TLB 15 is default CCSRBAR.
+ */
+ .long 0x09 /* the following data table uses a few of 16 TLB entries */
+
+ .long TLB1_MAS0(1,1,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,2,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
+ .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,3,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(((CFG_LBC_LCLDEVS_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_LBC_LCLDEVS_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long TLB1_MAS0(1,4,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,5,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,6,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+#if defined(CONFIG_RAM_AS_FLASH)
+ .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+#else
+ .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+#endif
+ .long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,7,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+#ifdef CONFIG_L2_INIT_RAM
+ .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+#else
+ .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+#endif
+ .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+ .long TLB1_MAS0(1,8,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ .long TLB1_MAS0(1,15,0)
+ .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+#else
+ .long TLB1_MAS0(1,15,0)
+ .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+ .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+#endif
+ entry_end
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-8000_0000: Up to 2G DDR
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ * f800_0000-fbff_ffff: LBC SDRAM(64M)
+ * fc00_0000-fcff_ffff: LBC BCSR (1M, Chip select 1)
+ * fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ * ff00_0000-ffff_ffff: Flash(16M)
+ * We don't need a local window for CCSRBAR and flash because they
+ * reside in their default mapped spaces.
+ */
+
+#define LAWBAR0 0
+#define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_2G)) & ~LAWAR_EN)
+
+#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR2 0
+#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+ .section .bootpg, "ax"
+ .globl law_entry
+law_entry:
+ entry_start
+ .long 0x03
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
+ entry_end
--- /dev/null
+/*
+ * (C) Copyright 2003, Embedded Edge, LLC
+ * Dan Malek, <dan@embeddededge.com>
+ * Copied from ADS85xx.
+ * Updates for Silicon Tx GP3 8560
+ *
+ * (C) Copyright 2003,Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+extern long int spd_sdram (void);
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <ioports.h>
+#include <asm/io.h>
+#include <spd.h>
+#include <miiphy.h>
+
+long int fixed_sdram (void);
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
+ /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
+ /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
+ /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
+ /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
+ /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
+ /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
+ /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
+ /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
+ /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
+ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
+ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
+ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
+ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
+ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
+ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
+ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
+ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
+ /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
+ /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
+ /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
+ /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
+ /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
+ /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
+ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
+ /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
+ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
+ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
+ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
+ /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
+ /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
+ /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
+ /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
+ /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
+ /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
+ /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
+ /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
+ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
+ /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
+ /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
+ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
+ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
+ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
+ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
+ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
+ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
+ /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */
+ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
+ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
+ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
+ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
+ /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */
+ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */
+ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
+ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
+ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
+ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
+ /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
+ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
+ /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
+ /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TxD */
+ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
+ /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
+ /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
+ /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
+ /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
+ /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
+ /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
+ /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
+ /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
+ /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
+ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C CLK */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
+ /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
+ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
+ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+static uint64_t blinky_increment;
+static uint64_t next_led_update;
+static uint led_bit;
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_PCI)
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ccsr_pcix_t *pci = &immr->im_pcix;
+
+ pci->peer &= 0xfffffffdf; /* disable master abort */
+#endif
+ return 0;
+}
+
+void reset_phy (void)
+{
+ volatile uint *blatch;
+
+ blatch = (volatile uint *)CFG_LBC_LCLDEVS_BASE;
+
+ /* reset Giga bit Ethernet port if needed here */
+
+ *blatch &= ~0x000000c0;
+ udelay(100);
+ *blatch = 0x000000c1; /* Light one led, too */
+ udelay(1000);
+
+#if 0 /* This is the port we really want to use for debugging. */
+ /* reset the CPM FEC port */
+#if (CONFIG_ETHER_INDEX == 2)
+ bcsr->bcsr2 &= ~FETH2_RST;
+ udelay(2);
+ bcsr->bcsr2 |= FETH2_RST;
+ udelay(1000);
+#elif (CONFIG_ETHER_INDEX == 3)
+ bcsr->bcsr3 &= ~FETH3_RST;
+ udelay(2);
+ bcsr->bcsr3 |= FETH3_RST;
+ udelay(1000);
+#endif
+#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
+ miiphy_reset(0x0); /* reset PHY */
+ miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */
+ miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#endif /* CONFIG_MII */
+#endif
+}
+
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+
+ get_sys_info (&sysinfo);
+
+ printf ("Board: Silicon Tx GPPP 8560 Board\n");
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
+ printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
+ if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
+ || (CFG_LBC_LCRR & 0x0f) == 8) {
+ printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
+ } else {
+ printf("\tLBC: unknown\n");
+ }
+ printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+ printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
+
+ return (0);
+}
+
+/* Blinkin' LEDS for Robert.
+*/
+void
+show_activity(int flag)
+{
+ volatile uint *blatch;
+
+ if (next_led_update > get_ticks())
+ return;
+
+ blatch = (volatile uint *)CFG_LBC_LCLDEVS_BASE;
+
+ led_bit >>= 1;
+ if (led_bit == 0)
+ led_bit = 0x08;
+ *blatch = (0xc0 | led_bit);
+ eieio();
+ next_led_update += (get_tbclk() / 4);
+}
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+ extern long spd_sdram (void);
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+
+#if defined(CONFIG_DDR_DLL)
+ volatile ccsr_gur_t *gur= &immap->im_gur;
+ uint temp_ddrdll = 0;
+
+ /* Work around to stabilize DDR DLL */
+ temp_ddrdll = gur->ddrdllcr;
+ gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+ asm("sync;isync;msync");
+#endif
+
+ dram_size = spd_sdram ();
+
+#if defined(CONFIG_DDR_ECC)
+ {
+ /* Initialize all of memory for ECC, then
+ * enable errors */
+ uint *p = 0;
+ uint i = 0;
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+ dma_init();
+ for (*p = 0; p < (uint *)(8 * 1024); p++) {
+ if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
+ *p = (unsigned int)0xdeadbeef;
+ if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
+ }
+
+ /* 8K */
+ dma_xfer((uint *)0x2000,0x2000,(uint *)0);
+ /* 16K */
+ dma_xfer((uint *)0x4000,0x4000,(uint *)0);
+ /* 32K */
+ dma_xfer((uint *)0x8000,0x8000,(uint *)0);
+ /* 64K */
+ dma_xfer((uint *)0x10000,0x10000,(uint *)0);
+ /* 128k */
+ dma_xfer((uint *)0x20000,0x20000,(uint *)0);
+ /* 256k */
+ dma_xfer((uint *)0x40000,0x40000,(uint *)0);
+ /* 512k */
+ dma_xfer((uint *)0x80000,0x80000,(uint *)0);
+ /* 1M */
+ dma_xfer((uint *)0x100000,0x100000,(uint *)0);
+ /* 2M */
+ dma_xfer((uint *)0x200000,0x200000,(uint *)0);
+ /* 4M */
+ dma_xfer((uint *)0x400000,0x400000,(uint *)0);
+
+ for (i = 1; i < dram_size / 0x800000; i++) {
+ dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
+ }
+
+ /* Enable errors for ECC */
+ ddr->err_disable = 0x00000000;
+ asm("sync;isync;msync");
+ }
+#endif
+
+ return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("SDRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("SDRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("SDRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ #ifndef CFG_RAMBOOT
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+
+ ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+ ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+ ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+ ddr->sdram_mode = CFG_DDR_MODE;
+ ddr->sdram_interval = CFG_DDR_INTERVAL;
+ #if defined (CONFIG_DDR_ECC)
+ ddr->err_disable = 0x0000000D;
+ ddr->err_sbe = 0x00ff0000;
+ #endif
+ asm("sync;isync;msync");
+ udelay(500);
+ #if defined (CONFIG_DDR_ECC)
+ /* Enable ECC checking */
+ ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+ #else
+ ddr->sdram_cfg = CFG_DDR_CONTROL;
+ #endif
+ asm("sync; isync; msync");
+ udelay(500);
+ #endif
+ return ( CFG_SDRAM_SIZE * 1024 * 1024);
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
--- /dev/null
+/*
+ * (C) Copyright 2003 Embedded Edge, LLC
+ * Dan Malek, <dan@embeddededge.com>
+ * Copied from ADS85xx.
+ * Updates for Silicon Tx GP3 8560.
+ *
+ * (C) Copyright 2002,2003,Motorola,Inc.
+ * Xianghua Xiao, X.Xiao@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/stxgp3/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/stxgp3/init.o (.text)
+ cpu/mpc85xx/commproc.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/serial_scc.o (.text)
+ cpu/mpc85xx/ether_fcc.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/tsec.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ cpu/mpc85xx/i2c.o (.text)
+ cpu/mpc85xx/spd_sdram.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
static int tsec_recv(struct eth_device* dev);
static int tsec_init(struct eth_device* dev, bd_t * bd);
static void tsec_halt(struct eth_device* dev);
-static void init_registers(volatile tsec_t *regs);
-static void startup_tsec(volatile tsec_t *regs);
-static void init_phy(volatile tsec_t *regs);
+static void init_registers(tsec_t *regs);
+static void startup_tsec(tsec_t *regs);
+static void init_phy(tsec_t *regs);
+uint read_phy_reg(tsec_t *regbase, uint phyid, uint offset);
+
+static int phy_id = -1;
/* Initialize device structure. returns 0 on failure, 1 on
* success */
{
struct eth_device* dev;
int i;
+ tsec_t *regs = (tsec_t *)(TSEC_BASE_ADDR);
dev = (struct eth_device*) malloc(sizeof *dev);
memset(dev, 0, sizeof *dev);
- sprintf(dev->name, "MOTOROLA ETHERNET");
+ sprintf(dev->name, "MOTO ETHERNET");
dev->iobase = 0;
dev->priv = 0;
dev->init = tsec_init;
eth_register(dev);
+ /* Reconfigure the PHY to advertise everything here
+ * so that it works with both gigabit and 10/100 */
+#ifdef CONFIG_PHY_M88E1011
+ /* Assign a Physical address to the TBI */
+ regs->tbipa=TBIPA_VALUE;
+
+ /* reset the management interface */
+ regs->miimcfg=MIIMCFG_RESET;
+
+ regs->miimcfg=MIIMCFG_INIT_VALUE;
+
+ /* Wait until the bus is free */
+ while(regs->miimind & MIIMIND_BUSY);
+
+ /* Locate PHYs. Skip TBIPA, which we know is 31.
+ */
+ for (i=0; i<31; i++) {
+ if (read_phy_reg(regs, i, 2) == 0x141) {
+ if (phy_id == -1)
+ phy_id = i;
+#ifdef TSEC_DEBUG
+ printf("Found Marvell PHY at 0x%02x\n", i);
+#endif
+ }
+ }
+#ifdef TSEC_DEBUG
+ printf("Using PHY ID 0x%02x\n", phy_id);
+#endif
+ write_phy_reg(regs, phy_id, MIIM_CONTROL, MIIM_CONTROL_RESET);
+
+ RESET_ERRATA(regs, phy_id);
+
+ /* Configure the PHY to advertise gbit and 10/100 */
+ write_phy_reg(regs, phy_id, MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT);
+ write_phy_reg(regs, phy_id, MIIM_ANAR, MIIM_ANAR_INIT);
+
+ /* Reset the PHY so the new settings take effect */
+ write_phy_reg(regs, phy_id, MIIM_CONTROL, MIIM_CONTROL_RESET);
+#endif
return 1;
}
* and brings the interface up */
int tsec_init(struct eth_device* dev, bd_t * bd)
{
- volatile tsec_t *regs;
+ tsec_t *regs;
uint tempval;
char tmpbuf[MAC_ADDR_LEN];
int i;
- regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+ regs = (tsec_t *)(TSEC_BASE_ADDR);
/* Make sure the controller is stopped */
tsec_halt(dev);
/* and then passes those bits on to the variable specified in */
/* value */
/* Before it does the read, it needs to clear the command field */
-uint read_phy_reg(volatile tsec_t *regbase, uint phyid, uint offset)
+uint read_phy_reg(tsec_t *regbase, uint phyid, uint offset)
{
uint value;
}
/* Setup the PHY */
-static void init_phy(volatile tsec_t *regs)
+static void init_phy(tsec_t *regs)
{
uint testval;
unsigned int timeout = TSEC_TIMEOUT;
#endif
/* Set the PHY to gigabit, full duplex, Auto-negotiate */
- write_phy_reg(regs, 0, MIIM_CONTROL, MIIM_CONTROL_INIT);
+ write_phy_reg(regs, phy_id, MIIM_CONTROL, MIIM_CONTROL_INIT);
- /* Wait until TBI_STATUS indicates AN is done */
+ /* Wait until STATUS indicates Auto-Negotiation is done */
DBGPRINT("Waiting for Auto-negotiation to complete\n");
- testval=read_phy_reg(regs, 0, MIIM_TBI_STATUS);
+ testval=read_phy_reg(regs, phy_id, MIIM_STATUS);
- while((!(testval & MIIM_TBI_STATUS_AN_DONE))&& timeout--) {
- testval=read_phy_reg(regs, 0, MIIM_TBI_STATUS);
+ while((!(testval & MIIM_STATUS_AN_DONE))&& timeout--) {
+ testval=read_phy_reg(regs, phy_id, MIIM_STATUS);
}
- if(testval & MIIM_TBI_STATUS_AN_DONE)
+ if(testval & MIIM_STATUS_AN_DONE)
DBGPRINT("Auto-negotiation done\n");
else
DBGPRINT("Auto-negotiation timed-out.\n");
#ifdef CONFIG_PHY_CIS8201
/* Find out what duplexity (duplicity?) we have */
/* Read it twice to make sure */
- testval=read_phy_reg(regs, 0, MIIM_AUX_CONSTAT);
+ testval=read_phy_reg(regs, phy_id, MIIM_AUX_CONSTAT);
if(testval & MIIM_AUXCONSTAT_DUPLEX) {
DBGPRINT("Enet starting in full duplex\n");
#ifdef CONFIG_PHY_M88E1011
/* Read the PHY to see what speed and duplex we are */
- testval=read_phy_reg(regs, 0, MIIM_PHY_STATUS);
+ testval=read_phy_reg(regs, phy_id, MIIM_PHY_STATUS);
timeout = TSEC_TIMEOUT;
while((!(testval & MIIM_PHYSTAT_SPDDONE)) && timeout--) {
- testval = read_phy_reg(regs,0,MIIM_PHY_STATUS);
+ testval = read_phy_reg(regs,phy_id,MIIM_PHY_STATUS);
}
if(!(testval & MIIM_PHYSTAT_SPDDONE))
DBGPRINT("Enet: Speed not resolved\n");
- testval=read_phy_reg(regs, 0, MIIM_PHY_STATUS);
+ testval=read_phy_reg(regs, phy_id, MIIM_PHY_STATUS);
if(testval & MIIM_PHYSTAT_DUPLEX) {
DBGPRINT("Enet starting in Full Duplex\n");
regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
}
-static void init_registers(volatile tsec_t *regs)
+static void init_registers(tsec_t *regs)
{
/* Clear IEVENT */
regs->ievent = IEVENT_INIT_CLEAR;
}
-static void startup_tsec(volatile tsec_t *regs)
+static void startup_tsec(tsec_t *regs)
{
int i;
{
int i;
int result = 0;
- volatile tsec_t * regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+ tsec_t * regs = (tsec_t *)(TSEC_BASE_ADDR);
/* Find an empty buffer descriptor */
for(i=0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
static int tsec_recv(struct eth_device* dev)
{
int length;
- volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+ tsec_t *regs = (tsec_t *)(TSEC_BASE_ADDR);
while(!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
static void tsec_halt(struct eth_device* dev)
{
- volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
+ tsec_t *regs = (tsec_t *)(TSEC_BASE_ADDR);
regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
}
+
+#ifndef CONFIG_BITBANGMII
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+int miiphy_read(unsigned char addr,
+ unsigned char reg,
+ unsigned short *value)
+{
+ tsec_t *regs;
+ unsigned short rv;
+
+ regs = (tsec_t *)(TSEC_BASE_ADDR);
+ rv = (unsigned short)read_phy_reg(regs, addr, reg);
+ *value = rv;
+
+ return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ * 0 on success
+ */
+int miiphy_write(unsigned char addr,
+ unsigned char reg,
+ unsigned short value)
+{
+ tsec_t *regs;
+
+ regs = (tsec_t *)(TSEC_BASE_ADDR);
+ write_phy_reg(regs, addr, reg, value);
+
+ return 0;
+}
+#endif /* CONFIG_BITBANGMII */
#endif /* CONFIG_TSEC_ENET */
#include <net.h>
#include <mpc85xx.h>
+/* TSEC1 is offset 0x24000, TSEC2 is offset 0x25000
+#define TSEC_BASE_ADDR (CFG_IMMR + 0x25000)
+*/
#define TSEC_BASE_ADDR (CFG_IMMR + 0x24000)
#define TSEC_MEM_SIZE 0x01000
#define MIIMIND_BUSY 0x00000001
#define MIIMIND_NOTVALID 0x00000004
-#define MIIM_TBICON 0x11
-#define MIIM_TBICON_GMII 0x00000010
-#define MIIM_TBICON_AN 0x00000100
-
#define MIIM_CONTROL 0x00
#define MIIM_CONTROL_INIT 0x00001140
#define MIIM_ANEN 0x00001000
+#define MIIM_CONTROL_RESET 0x00009140
+
+#define MIIM_STATUS 0x1
+#define MIIM_STATUS_AN_DONE 0x00000020
-#define MIIM_TBI_STATUS 0x1
-#define MIIM_TBI_STATUS_AN_DONE 0x00000020
+#define MIIM_GBIT_CONTROL 0x9
+#define MIIM_GBIT_CONTROL_INIT 0xe00
#define MIIM_TBI_ANEX 0x6
#define MIIM_TBI_ANEX_NP 0x00000004
#endif
#ifdef CONFIG_PHY_M88E1011
-#define MIIM_ANAR 0x04
-#define MIIM_ANAR_ADVERTISEMENT 0x01e1
+#define MIIM_ANAR 0x4
+#define MIIM_ANAR_INIT 0x1e1
#define MIIM_GBIT_CON 0x09
-#define MIIM_GBIT_CON_ADVERT 0x1e00
+#define MIIM_GBIT_CON_ADVERT 0x0e00
#define MIIM_PHY_STATUS 0x11
#define MIIM_PHYSTAT_SPEED 0xc000
} while(0)
+/* This works around errata in reseting the PHY */
+#define RESET_ERRATA(regs, ID) do { \
+ write_phy_reg(regs, (ID), 0x1d, 0x1f); \
+ write_phy_reg(regs, (ID), 0x1e, 0x200c); \
+ write_phy_reg(regs, (ID), 0x1d, 0x5); \
+ write_phy_reg(regs, (ID), 0x1e, 0x0); \
+ write_phy_reg(regs, (ID), 0x1e, 0x100); \
+} while(0)
+
#define IEVENT_INIT_CLEAR 0xffffffff
#define IEVENT_BABR 0x80000000
#define IEVENT_RXC 0x40000000
uint pci_oftpr;
char res8[4];
uint pci_ophpr;
- char res8_2[4];
+ char res8_2[4];
uint pci_optpr;
char res9[8];
uint pci_mucr;
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_MAX_RAM_SIZE 0x10000000
+#define CONFIG_VERY_BIG_RAM
#define CFG_RESET_ADDRESS 0xFFF00100
--- /dev/null
+/*
+ * (C) Copyright 2003 Embedded Edge, LLC
+ * Dan Malek <dan@embeddededge.com>
+ * Copied from ADS85xx.
+ * Updates for Silicon Tx GP3 8560 board.
+ *
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8560ads board configuration file */
+/* please refer to doc/README.mpc85xx for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
+#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */
+#define CONFIG_MPC8560 1 /* MPC8560 specific */
+#define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/
+
+#undef CONFIG_PCI /* pci ethernet support */
+#define CONFIG_TSEC_ENET /* tsec ethernet support*/
+#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+
+#if defined(CONFIG_MPC85xx_REV1)
+#define CONFIG_DDR_DLL /* possible DLL fix needed */
+#endif
+
+/* Using Localbus SDRAM to emulate flash before we can program the flash,
+ * normally you need a flash-boot image(u-boot.bin), if so undef this.
+ */
+#undef CONFIG_RAM_AS_FLASH
+
+#define CONFIG_SYS_CLK_FREQ 33333333 /* most pci cards are 33Mhz */
+
+/* Blinkin' LEDs for Robert :-)
+*/
+#define CONFIG_SHOW_ACTIVITY 1
+
+#if !defined(CONFIG_SPD_EEPROM) /* manually set up DDR parameters */
+#define CONFIG_DDR_SETTING
+#endif
+
+/* below can be toggled for performance analysis. otherwise use default */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#undef CONFIG_BTB /* toggle branch predition */
+#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest region */
+#define CFG_MEMTEST_END 0x00400000
+
+#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
+ defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
+ defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
+#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
+#endif
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+/* GPPP supports up to 2G of DRAM. Allocate up to 1G until we get
+ * a chance to try it out. Actual size is always read from sdram eeprom.
+ */
+#define CFG_SDRAM_SIZE 1024 /* DDR is 1GB */
+
+/* Localbus SDRAM is an option, not all boards have it.
+*/
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */
+#else
+#define CFG_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */
+#endif
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */
+#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */
+#else /* Boot from real Flash */
+#define CFG_FLASH_BASE 0xff000000 /* start of FLASH 16M */
+#define CFG_BR0_PRELIM 0xff001801 /* port size 32bit */
+#endif
+
+#define CFG_OR0_PRELIM 0xff000ff7 /* 16 MB Flash */
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 136 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+/* The configuration latch is Chip Select 1.
+ * It's an 8-bit latch in the upper 8 bits of the word.
+ */
+#define CFG_BR1_PRELIM 0xfc001801 /* 32-bit port */
+#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */
+#define CFG_LBC_LCLDEVS_BASE 0xfc000000 /* Base of localbus devices */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#ifdef CFG_RAMBOOT
+#define CFG_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
+#else
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#endif
+#define CFG_CCSRBAR 0xfdf00000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+
+#define SPD_EEPROM_ADDRESS 0x54 /* DDR DIMM */
+
+#if defined(CONFIG_DDR_SETTING)
+#define CFG_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
+#define CFG_DDR_CS0_CONFIG 0x80000002
+#define CFG_DDR_TIMING_1 0x37344321
+#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning*/
+#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR*/
+#define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page*/
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
+#define CFG_OR2_PRELIM 0xfc006901
+#define CFG_LBC_LCRR 0x00030004 /* local bus freq */
+#define CFG_LBC_LBCR 0x00000000
+#define CFG_LBC_LSRT 0x20000000
+#define CFG_LBC_MRTPR 0x20000000
+#define CFG_LBC_LSDMR_1 0x2861b723
+#define CFG_LBC_LSDMR_2 0x0861b723
+#define CFG_LBC_LSDMR_3 0x0861b723
+#define CFG_LBC_LSDMR_4 0x1861b723
+#define CFG_LBC_LSDMR_5 0x4061b723
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on something else */
+#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
+
+#define CONFIG_BAUDRATE 38400
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#if 0
+#define CFG_I2C_NOPROBES {0x00} /* Don't probe these addrs */
+#else
+/* I did the 'if 0' so we could keep the syntax above if ever needed. */
+#undef CFG_I2C_NOPROBES
+#endif
+
+#define CFG_PCI_MEM_BASE 0xe0000000
+#define CFG_PCI_MEM_PHYS 0xe0000000
+#define CFG_PCI_MEM_SIZE 0x10000000
+
+#if defined(CONFIG_PCI) /* PCI Ethernet card */
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
+#undef CONFIG_TULIP
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ #if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_MEMADDR 0xe0000000
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+ #endif
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
+#if defined(CONFIG_MPC85xx_REV1) /* Errata PCI 7 */
+ #define CFG_PCI_SUBSYS_DEVICEID 0x0003
+#else
+ #define CFG_PCI_SUBSYS_DEVICEID 0x0009
+#endif
+#elif defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 8 /* PHY address */
+#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
+#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
+#undef CONFIG_ETHER_NONE /* define if ether on something else */
+#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
+ #if (CONFIG_ETHER_INDEX == 2)
+ /*
+ * - Rx-CLK is CLK13
+ * - Tx-CLK is CLK14
+ * - Select bus for bd/buffers
+ * - Full duplex
+ */
+ #define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+ #define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+ #define CFG_CPMFCR_RAMTYPE 0
+#if 0
+ #define CFG_FCC_PSMR (FCC_PSMR_FDE)
+#else
+ #define CFG_FCC_PSMR 0
+#endif
+ #define FETH2_RST 0x01
+ #elif (CONFIG_ETHER_INDEX == 3)
+ /* need more definitions here for FE3 */
+ #define FETH3_RST 0x80
+ #endif /* CONFIG_ETHER_INDEX */
+#define CONFIG_MII /* MII PHY management */
+#undef CONFIG_BITBANGMII /* bit-bang MII PHY management */
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT 2 /* Port C */
+#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
+#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
+#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
+
+#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
+ else iop->pdat &= ~0x00400000
+
+#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
+ else iop->pdat &= ~0x00200000
+
+#define MIIDELAY udelay(1)
+#endif
+
+/* Environment */
+/* We use the top boot sector flash, so we have some 16K sectors for env
+ * But....functions don't seem smart enough yet.
+ */
+#ifndef CFG_RAMBOOT
+ #if defined(CONFIG_RAM_AS_FLASH)
+ #define CFG_ENV_IS_NOWHERE
+ #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000)
+ #define CFG_ENV_SIZE 0x2000
+ #else
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x60000)
+ #define CFG_ENV_SECT_SIZE 0x4000 /* 16K (one top sector) for env */
+ #endif
+ #define CFG_ENV_SIZE 0x2000
+#else
+#define CFG_NO_FLASH 1 /* Flash is not usable now */
+#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,38400"
+#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xff900000"
+#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+ #if defined(CONFIG_PCI)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI | \
+ CFG_CMD_PING | CFG_CMD_I2C) & \
+ ~(CFG_CMD_ENV | \
+ CFG_CMD_LOADS ))
+ #elif defined(CONFIG_TSEC_ENET)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | \
+ CFG_CMD_MII | CFG_CMD_I2C ) & \
+ ~(CFG_CMD_ENV))
+ #elif defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_MII | \
+ CFG_CMD_PING | CFG_CMD_I2C) & \
+ ~(CFG_CMD_ENV))
+ #endif
+#else
+ #if defined(CONFIG_PCI)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI | \
+ CFG_CMD_PING | CFG_CMD_I2C)
+ #elif defined(CONFIG_TSEC_ENET)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | \
+ CFG_CMD_MII | CFG_CMD_I2C)
+ #elif defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MII | \
+ CFG_CMD_PING | CFG_CMD_I2C)
+ #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "GPPP=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x1000000 /* default load address */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*Note: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#define CONFIG_ETHADDR 00:01:af:07:9b:8a
+#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
+#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c
+#endif
+
+#define CONFIG_SERVERIP 192.168.85.1
+#define CONFIG_IPADDR 192.168.85.60
+#define CONFIG_GATEWAYIP 192.168.85.1
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_HOSTNAME STX_GP3
+#define CONFIG_ROOTPATH /gppproot
+#define CONFIG_BOOTFILE uImage
+
+#endif /* __CONFIG_H */
#include <command.h>
#include <malloc.h>
#include <version.h>
+#include <watchdog.h>
const char version_string[] =
U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
NULL,
};
+void board_init(void)
+{
+ init_fnc_t **init_fnc_ptr;
+
+ for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+ WATCHDOG_RESET ();
+ if ((*init_fnc_ptr) () != 0) {
+ hang ();
+ }
+ }
+
+ /* main_loop */
+ for (;;) {
+ WATCHDOG_RESET ();
+ main_loop ();
+ }
+}
+
void hang (void)
{
puts ("### ERROR ### Please RESET the board ###\n");
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
bd->bi_pci_busfreq = get_PCI_freq ();
bd->bi_opbfreq = get_OPB_freq ();
-
-#if defined(CONFIG_I2CFAST)
- /*
- * set bi_iic_fast for linux taking environment variable
- * "i2cfast" into account
- */
- {
- char *s = getenv ("i2cfast");
- if (s && ((*s == 'y') || (*s == 'Y'))) {
- bd->bi_iic_fast[0] = 1;
- bd->bi_iic_fast[1] = 1;
- } else {
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
- }
- }
-#else
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
-#endif
-
#elif defined(CONFIG_XILINX_ML300)
bd->bi_pci_busfreq = get_PCI_freq ();
#endif
* where had to use getenv_r(), which can be pretty slow when
* the environment is in EEPROM.
*/
+
+#if defined(CFG_EXTBDINFO)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_I2CFAST)
+ /*
+ * set bi_iic_fast for linux taking environment variable
+ * "i2cfast" into account
+ */
+ {
+ char *s = getenv ("i2cfast");
+ if (s && ((*s == 'y') || (*s == 'Y'))) {
+ bd->bi_iic_fast[0] = 1;
+ bd->bi_iic_fast[1] = 1;
+ } else {
+ bd->bi_iic_fast[0] = 0;
+ bd->bi_iic_fast[1] = 0;
+ }
+ }
+#else
+ bd->bi_iic_fast[0] = 0;
+ bd->bi_iic_fast[1] = 0;
+#endif /* CONFIG_I2CFAST */
+#endif /* CONFIG_405GP, CONFIG_405EP */
+#endif /* CFG_EXTBDINFO */
+
s = getenv ("ethaddr");
#if defined (CONFIG_MBX) || defined (CONFIG_RPXCLASSIC) || defined(CONFIG_IAD210)
if (s == NULL)
defined(CONFIG_MPC8560ADS) || \
defined(CONFIG_PCU_E) || \
defined(CONFIG_RPXSUPER) || \
+ defined(CONFIG_STXGP3) || \
defined(CONFIG_SPD823TS) )
WATCHDOG_RESET ();
projects / u-boot / commitdiff