Move DaVinci PSC support from board/* to cpu/* where it belongs.
The PSC module manages clocks and resets for all DaVinci-family
SoCs, and isn't at all board-specific.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
LIB = $(obj)lib$(VENDOR).a
-COBJS := psc.o misc.o
+COBJS := misc.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
+++ /dev/null
-/*
- * Power and Sleep Controller (PSC) functions.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-#define PINMUX0_EMACEN (1 << 31)
-#define PINMUX0_AECS5 (1 << 11)
-#define PINMUX0_AECS4 (1 << 10)
-
-#define PINMUX1_I2C (1 << 7)
-#define PINMUX1_UART1 (1 << 1)
-#define PINMUX1_UART0 (1 << 0)
-
-/*
- * The DM6446 includes two separate power domains: "Always On" and "DSP". The
- * "Always On" power domain is always on when the chip is on. The "Always On"
- * domain is powered by the VDD pins of the DM6446. The majority of the
- * DM6446's modules lie within the "Always On" power domain. A separate
- * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain
- * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of
- * the DM6446.
- */
-
-/* Works on Always On power domain only (no PD argument) */
-void lpsc_on(unsigned int id)
-{
- dv_reg_p mdstat, mdctl;
-
- if (id >= DAVINCI_LPSC_GEM)
- return; /* Don't work on DSP Power Domain */
-
- mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
- mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-
- while (REG(PSC_PTSTAT) & 0x01);
-
- if ((*mdstat & 0x1f) == 0x03)
- return; /* Already on and enabled */
-
- *mdctl |= 0x03;
-
- /* Special treatment for some modules as for sprue14 p.7.4.2 */
- switch (id) {
- case DAVINCI_LPSC_VPSSSLV:
- case DAVINCI_LPSC_EMAC:
- case DAVINCI_LPSC_EMAC_WRAPPER:
- case DAVINCI_LPSC_MDIO:
- case DAVINCI_LPSC_USB:
- case DAVINCI_LPSC_ATA:
- case DAVINCI_LPSC_VLYNQ:
- case DAVINCI_LPSC_UHPI:
- case DAVINCI_LPSC_DDR_EMIF:
- case DAVINCI_LPSC_AEMIF:
- case DAVINCI_LPSC_MMC_SD:
- case DAVINCI_LPSC_MEMSTICK:
- case DAVINCI_LPSC_McBSP:
- case DAVINCI_LPSC_GPIO:
- *mdctl |= 0x200;
- break;
- }
-
- REG(PSC_PTCMD) = 0x01;
-
- while (REG(PSC_PTSTAT) & 0x03);
- while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
-}
-
-/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-void dsp_on(void)
-{
- int i;
-
- if (REG(PSC_PDSTAT1) & 0x1f)
- return; /* Already on */
-
- REG(PSC_GBLCTL) |= 0x01;
- REG(PSC_PDCTL1) |= 0x01;
- REG(PSC_PDCTL1) &= ~0x100;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
- REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
- REG(PSC_PTCMD) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (REG(PSC_EPCPR) & 0x02)
- break;
- }
-
- REG(PSC_CHP_SHRTSW) = 0x01;
- REG(PSC_PDCTL1) |= 0x100;
- REG(PSC_EPCCR) = 0x02;
-
- for (i = 0; i < 100; i++) {
- if (!(REG(PSC_PTSTAT) & 0x02))
- break;
- }
-
- REG(PSC_GBLCTL) &= ~0x1f;
-}
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-void davinci_enable_uart0(void)
-{
- lpsc_on(DAVINCI_LPSC_UART0);
-
- /* Bringup UART0 out of reset */
- REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
- /* Enable UART0 MUX lines */
- REG(PINMUX1) |= PINMUX1_UART0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
- lpsc_on(DAVINCI_LPSC_EMAC);
- lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
- lpsc_on(DAVINCI_LPSC_MDIO);
-
- /* Enable GIO3.3V cells used for EMAC */
- REG(VDD3P3V_PWDN) = 0;
-
- /* Enable EMAC. */
- REG(PINMUX0) |= PINMUX0_EMACEN;
-}
-#endif
-
-void davinci_enable_i2c(void)
-{
- lpsc_on(DAVINCI_LPSC_I2C);
-
- /* Enable I2C pin Mux */
- REG(PINMUX1) |= PINMUX1_I2C;
-}
-
-void davinci_errata_workarounds(void)
-{
- /*
- * Workaround for TMS320DM6446 errata 1.3.22:
- * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
- * Revision(s) Affected: 1.3 and earlier
- */
- REG(PSC_SILVER_BULLET) = 0;
-
- /*
- * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
- * as suggested in TMS320DM6446 errata 2.1.2:
- *
- * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
- * low priority modules can occupy the bus and prevent high priority
- * modules like the VPSS from getting the required DDR2 throughput.
- * A hex value of 0x20 should provide a good ARM (cache enabled)
- * performance and still allow good utilization by the VPSS or other
- * modules.
- */
- REG(VBPR) = 0x20;
-}
+++ /dev/null
-/*
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __PSC_H
-#define __PSC_H
-
-void lpsc_on(unsigned int id);
-void dsp_on(void);
-void davinci_enable_uart0(void);
-void davinci_enable_emac(void);
-void davinci_enable_i2c(void);
-void davinci_errata_workarounds(void);
-
-#endif /* __PSC_H */
#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
-#include "../common/psc.h"
#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
-#include "../common/psc.h"
#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
#include <common.h>
#include <i2c.h>
#include <asm/arch/hardware.h>
-#include "../common/psc.h"
#include "../common/misc.h"
#define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */
#include <common.h>
#include <asm/arch/hardware.h>
-#include "../common/psc.h"
#include "../common/misc.h"
DECLARE_GLOBAL_DATA_PTR;
LIB = $(obj)lib$(SOC).a
-COBJS = timer.o ether.o lxt972.o dp83848.o
+COBJS = timer.o ether.o lxt972.o dp83848.o psc.o
SOBJS = reset.o
ifndef CONFIG_SKIP_LOWLEVEL_INIT
--- /dev/null
+/*
+ * Power and Sleep Controller (PSC) functions.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+#define PINMUX0_EMACEN (1 << 31)
+#define PINMUX0_AECS5 (1 << 11)
+#define PINMUX0_AECS4 (1 << 10)
+
+#define PINMUX1_I2C (1 << 7)
+#define PINMUX1_UART1 (1 << 1)
+#define PINMUX1_UART0 (1 << 0)
+
+/*
+ * The DM6446 includes two separate power domains: "Always On" and "DSP". The
+ * "Always On" power domain is always on when the chip is on. The "Always On"
+ * domain is powered by the VDD pins of the DM6446. The majority of the
+ * DM6446's modules lie within the "Always On" power domain. A separate
+ * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain
+ * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of
+ * the DM6446.
+ */
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01);
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ switch (id) {
+ case DAVINCI_LPSC_VPSSSLV:
+ case DAVINCI_LPSC_EMAC:
+ case DAVINCI_LPSC_EMAC_WRAPPER:
+ case DAVINCI_LPSC_MDIO:
+ case DAVINCI_LPSC_USB:
+ case DAVINCI_LPSC_ATA:
+ case DAVINCI_LPSC_VLYNQ:
+ case DAVINCI_LPSC_UHPI:
+ case DAVINCI_LPSC_DDR_EMIF:
+ case DAVINCI_LPSC_AEMIF:
+ case DAVINCI_LPSC_MMC_SD:
+ case DAVINCI_LPSC_MEMSTICK:
+ case DAVINCI_LPSC_McBSP:
+ case DAVINCI_LPSC_GPIO:
+ *mdctl |= 0x200;
+ break;
+ }
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03);
+ while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */
+}
+
+/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
+#if !defined(CONFIG_SYS_USE_DSPLINK)
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+#endif /* CONFIG_SYS_USE_DSPLINK */
+
+void davinci_enable_uart0(void)
+{
+ lpsc_on(DAVINCI_LPSC_UART0);
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= PINMUX1_UART0;
+}
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+void davinci_enable_emac(void)
+{
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable EMAC. */
+ REG(PINMUX0) |= PINMUX0_EMACEN;
+}
+#endif
+
+void davinci_enable_i2c(void)
+{
+ lpsc_on(DAVINCI_LPSC_I2C);
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= PINMUX1_I2C;
+}
+
+void davinci_errata_workarounds(void)
+{
+ /*
+ * Workaround for TMS320DM6446 errata 1.3.22:
+ * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
+ * Revision(s) Affected: 1.3 and earlier
+ */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /*
+ * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
+ * as suggested in TMS320DM6446 errata 2.1.2:
+ *
+ * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
+ * low priority modules can occupy the bus and prevent high priority
+ * modules like the VPSS from getting the required DDR2 throughput.
+ * A hex value of 0x20 should provide a good ARM (cache enabled)
+ * performance and still allow good utilization by the VPSS or other
+ * modules.
+ */
+ REG(VBPR) = 0x20;
+}
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+void lpsc_on(unsigned int id);
+void dsp_on(void);
+
+void davinci_enable_uart0(void);
+void davinci_enable_emac(void);
+void davinci_enable_i2c(void);
+void davinci_errata_workarounds(void);
+
/* Some PSC defines */
#define PSC_CHP_SHRTSW (0x01c40038)
#define PSC_GBLCTL (0x01c41010)
projects / u-boot / commitdiff