s3c64xx: Add ifdef at the S3C64XX only codes

The s3c6400.h file is only for S3C64XX cpu and the pheripheral port
address(0x70000000 - 0x7fffffff) exists at only S3C64XX cpu, so they
should be included by only S3C64XX cpu.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
index 2c0014f2bd5a4856a3cefc3202774867547beca4..befa0cdcc436eec15c4d654e2a1b8ba3d8e5f601 100644 (file)
--- a/cpu/arm1176/cpu.c
+++ b/cpu/arm1176/cpu.c
@@ -33,7 +33,9 @@
 
 #include <common.h>
 #include <command.h>
+#ifdef CONFIG_S3C64XX
 #include <asm/arch/s3c6400.h>
+#endif
 #include <asm/system.h>
 
 static void cache_flush (void);

diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
index 68a356d13e9a2d9069961d56286040bf4adeda39..e2b6c9b08d916d1c8caff4a17fed5609d0e35b06 100644 (file)
--- a/cpu/arm1176/start.S
+++ b/cpu/arm1176/start.S
@@ -35,7 +35,9 @@
 #ifdef CONFIG_ENABLE_MMU
 #include <asm/proc/domain.h>
 #endif
+#ifdef CONFIG_S3C64XX
 #include <asm/arch/s3c6400.h>
+#endif
 
 #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
 #define CONFIG_SYS_PHY_UBOOT_BASE      CONFIG_SYS_UBOOT_BASE
@@ -190,10 +192,12 @@ mmu_disable:
 #endif
 
 mmu_disable_phys:
+#ifdef CONFIG_S3C64XX
        /* Peri port setup */
        ldr     r0, =0x70000000
        orr     r0, r0, #0x13
        mcr     p15,0,r0,c15,c2,4       @ 256M (0x70000000 - 0x7fffffff)
+#endif
 
        /*
         * Go setup Memory and board specific bits prior to relocation.