integrator: update the Integrator/CP config

The Integrator/CP config file was very outdated and gives a
non functional U-Boot. So:

- Set the CONFIG_ARCH_CINTEGRATOR arch flag correctly
- Add proper core module configuration options
- Skip cluttered command lista and just include
  <config_cmd_default.h>
- Kill off #if 0 network section and insert some example
  configuration that simply just boots from the network
  using TFTP if available.
- Delete flash control registers that have no business
  in this config file. These are already moved down to
  board/armltd/integrator/integrator-sc.h

Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index ccbdf44cdeec8837dc272c219d916fbea2290248..57610a6511e82166bce46e8c03e3c4c9a38d6887 100644 (file)
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,8 +31,13 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* Integrator-specific configuration */
 #define CONFIG_INTEGRATOR
-#define CONFIG_ARCH_INTEGRATOR
+#define CONFIG_ARCH_CINTEGRATOR
+#define CONFIG_CM_INIT
+#define CONFIG_CM_REMAP
+#define CONFIG_CM_SPD_DETECT
+
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -47,6 +52,7 @@
 #define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS       1
 #define CONFIG_MISC_INIT_R             1       /* call misc_init_r during start up */
+
 /*
  * Size of malloc() pool
  */
@@ -85,32 +91,14 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-
+#include <config_cmd_default.h>
 
-#if 0
 #define CONFIG_BOOTDELAY       2
-#define CONFIG_BOOTARGS        "root=/dev/nfs nfsroot=<IP address>:/<exported rootfs>  mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
-#define CONFIG_BOOTCOMMAND "bootp ; bootm"
-#endif
-/* The kernel command line & boot command below are for a platform flashed with afu.axf
-
-Image 666 Block  0 End Block  0 address 0x24000000 exec 0x24000000- name u-boot
-Image 667 Block  1 End Block 13 address 0x24040000 exec 0x24040000- name u-linux
-Image 668 Block 14 End Block 33 address 0x24380000 exec 0x24380000- name rootfs
-SIB at Block62 End Block62 address 0x24f80000
-
-*/
-#define CONFIG_BOOTDELAY       2
-#define CONFIG_BOOTARGS        "root=/dev/mtdblock2 mem=128M ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0 console=ttyAMA0"
-#define CONFIG_BOOTCOMMAND "cp 0x24080000 0x7fc0 0x100000; bootm"
+#define CONFIG_BOOTARGS        "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
+#define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
+#define CONFIG_SERVERIP 192.168.1.100
+#define CONFIG_IPADDR 192.168.1.104
+#define CONFIG_BOOTFILE "uImage"
 
 /*
  * Miscellaneous configurable options
@@ -201,15 +189,6 @@ SIB at Block62 End Block62 address 0x24f80000
 
 #define CONFIG_ENV_SECT_SIZE   0x40000         /* 256KB */
 #define CONFIG_ENV_SIZE                8192            /* 8KB */
-/*-----------------------------------------------------------------------
- * CP control registers
- */
-#define CPCR_BASE              0xCB000000      /* CP Registers*/
-#define OS_FLASHPROG           0x00000004      /* Flash register*/
-#define CPMASK_EXTRABANK       0x8
-#define CPMASK_FLASHSIZE       0x4
-#define CPMASK_FLWREN          0x2
-#define CPMASK_FLVPPEN         0x1
 
 /*
  * The ARM boot monitor initializes the board.