sunxi: Add support for the Auxtek-T003 HDMI stick

The Auxtek-T003 HDMI stick is an A10s based HDMI stick with USB wifi,
and composite video out support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 12ff007e6d8387807d193c3f1811a0a7e09cd0d2..d9a2f5f5d5ccdec21d2a899a095c67c19a3eee32 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -86,6 +86,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
        sun4i-a10-olinuxino-lime.dtb \
        sun4i-a10-pcduino.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+       sun5i-a10s-auxtek-t003.dtb \
        sun5i-a10s-auxtek-t004.dtb \
        sun5i-a10s-mk802.dtb \
        sun5i-a10s-olinuxino-micro.dtb \

diff --git a/arch/arm/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
new file mode 100644 (file)
index 0000000..d4ad021
--- /dev/null
+++ b/arch/arm/dts/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       model = "Auxtek t003 A10s hdmi tv-stick";
+       compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_t003>;
+
+               red {
+                       label = "t003-tv-dongle:red:usr";
+                       gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+                       default-state = "on";
+               };
+       };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+
+       axp152: pmic@30 {
+               compatible = "x-powers,axp152";
+               reg = <0x30>;
+               interrupts = <0>;
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       mmc0_cd_pin_t003: mmc0_cd_pin@0 {
+               allwinner,pins = "PG1";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
+       led_pins_t003: led_pins@0 {
+               allwinner,pins = "PB2";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&reg_usb0_vbus {
+       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+       status = "okay";
+};
+
+&reg_usb1_vbus {
+       gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usb0_vbus_pin_a {
+       allwinner,pins = "PG13";
+};
+
+&usb1_vbus_pin_a {
+       allwinner,pins = "PB10";
+};
+
+&usb_otg {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usbphy {
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
+};

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 1f12a646e48a95f36bfc81e0cafd68370908b348..1b44ce8e0933328ad9a09a24e45901b53f9af9c5 100644 (file)
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -19,6 +19,7 @@ F:    include/configs/sun5i.h
 F:     configs/A10s-OLinuXino-M_defconfig
 F:     configs/A13-OLinuXino_defconfig
 F:     configs/A13-OLinuXinoM_defconfig
+F:     configs/Auxtek-T003_defconfig
 F:     configs/Auxtek-T004_defconfig
 F:     configs/mk802_a10s_defconfig
 F:     configs/r7-tv-dongle_defconfig

diff --git a/configs/Auxtek-T003_defconfig b/configs/Auxtek-T003_defconfig
new file mode 100644 (file)
index 0000000..b9692dc
--- /dev/null
+++ b/configs/Auxtek-T003_defconfig
@@ -0,0 +1,15 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN5I=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_EMR1=0
+CONFIG_USB1_VBUS_PIN="PB10"
+CONFIG_VIDEO_COMPOSITE=y
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t003"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_USB_EHCI_HCD=y