]> git.sur5r.net Git - u-boot/commitdiff
x86: i8042: Correctly initialize the controller
authorBin Meng <bmeng.cn@gmail.com>
Mon, 24 Aug 2015 08:00:06 +0000 (01:00 -0700)
committerSimon Glass <sjg@chromium.org>
Wed, 26 Aug 2015 14:54:16 +0000 (07:54 -0700)
The existing i8042 keyboard controller driver has some issues.
First of all, it does not issue a self-test command (0xaa) to the
controller at the very beginning. Without this, the controller
does not respond to any command at all. Secondly, it initializes
the configuration byte register to turn on the keyboard's interrupt,
as U-Boot does not normally allow interrupts to be processed.
Finally, at the end of the initialization routine, it wrongly
sets the controller to disable all interfaces including both
keyboard and mouse.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
drivers/input/i8042.c

index e8f59dfc7f248d3861691bf64243e800556d3bcc..9b5fa326668432861eeac846e9e84e9dbeb8f752 100644 (file)
@@ -454,51 +454,50 @@ static void kbd_conv_char(unsigned char scan_code)
 
 static int kbd_reset(void)
 {
-       /* KB Reset */
+       u8 config;
+
+       /* controller self test */
        if (kbd_input_empty() == 0)
                return -1;
+       out8(I8042_CMD_REG, CMD_SELF_TEST);
+       if (kbd_output_full() == 0)
+               return -1;
+       if (in8(I8042_DATA_REG) != KBC_TEST_OK)
+               return -1;
 
+       /* keyboard reset */
+       if (kbd_input_empty() == 0)
+               return -1;
        out8(I8042_DATA_REG, CMD_RESET_KBD);
-
        if (kbd_output_full() == 0)
                return -1;
-
        if (in8(I8042_DATA_REG) != KBD_ACK)
                return -1;
-
        if (kbd_output_full() == 0)
                return -1;
-
        if (in8(I8042_DATA_REG) != KBD_POR)
                return -1;
 
+       /* set AT translation and disable irq */
        if (kbd_input_empty() == 0)
                return -1;
-
-       /* Set KBC mode */
-       out8(I8042_CMD_REG, CMD_WR_CONFIG);
-
-       if (kbd_input_empty() == 0)
+       out8(I8042_CMD_REG, CMD_RD_CONFIG);
+       if (kbd_output_full() == 0)
                return -1;
-
-       out8(I8042_DATA_REG,
-            CONFIG_AT_TRANS | CONFIG_SET_BIST | CONFIG_KIRQ_EN);
-
+       config = in8(I8042_DATA_REG);
+       config |= CONFIG_AT_TRANS;
+       config &= ~(CONFIG_KIRQ_EN | CONFIG_MIRQ_EN);
        if (kbd_input_empty() == 0)
                return -1;
-
-       /* Enable Keyboard */
-       out8(I8042_CMD_REG, CMD_KBD_EN);
+       out8(I8042_CMD_REG, CMD_WR_CONFIG);
        if (kbd_input_empty() == 0)
                return -1;
+       out8(I8042_DATA_REG, config);
 
-       out8(I8042_CMD_REG, CMD_WR_CONFIG);
+       /* enable keyboard */
        if (kbd_input_empty() == 0)
                return -1;
-
-       out8(I8042_DATA_REG,
-            CONFIG_AT_TRANS | CONFIG_MCLK_DIS |
-            CONFIG_KCLK_DIS | CONFIG_SET_BIST);
+       out8(I8042_CMD_REG, CMD_KBD_EN);
        if (kbd_input_empty() == 0)
                return -1;