The PFUZE3000 uses registers addresses up to 0xff.
The DM pfuze100 driver supports both pfuze100 and pfuze3000. Allow it
to use the device type to return the correct number of registers.
Also rename the too generic PMIC_NUM_OF_REGS enumeration value for
pfuze3000 to match the other "PFUZE3000_" prefixed enumerations and the
pfuze100 enumeration value PFUZE100_NUM_OF_REGS.
Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
#include <power/pmic.h>
#include <power/regulator.h>
#include <power/pfuze100_pmic.h>
+#include <power/pfuze3000_pmic.h>
static const struct pmic_child_info pmic_children_info[] = {
/* sw[x], swbst */
static int pfuze100_reg_count(struct udevice *dev)
{
- return PFUZE100_NUM_OF_REGS;
+ return dev->driver_data == PFUZE3000 ? PFUZE3000_NUM_OF_REGS : PFUZE100_NUM_OF_REGS;
}
static int pfuze100_write(struct udevice *dev, uint reg, const uint8_t *buff,
p->name = name;
p->interface = PMIC_I2C;
- p->number_of_regs = PMIC_NUM_OF_REGS;
+ p->number_of_regs = PFUZE3000_NUM_OF_REGS;
p->hw.i2c.addr = CONFIG_POWER_PFUZE3000_I2C_ADDR;
p->hw.i2c.tx_num = 1;
p->bus = bus;
PFUZE3000_VLDO3CTL = 0x70,
PFUZE3000_VLD4CTL = 0x71,
- PMIC_NUM_OF_REGS = 0x7F,
+ PFUZE3000_NUM_OF_REGS = 0x100,
};
int power_pfuze3000_init(unsigned char bus);