This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)
Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = debris.o flash.o phantom.o
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Sangmoon Kim, Etin Systems. dogoil@etinsys.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <net.h>
-#include <pci.h>
-#include <i2c.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard (void)
-{
- /*TODO: Check processor type */
-
- puts ( "Board: Debris "
-#ifdef CONFIG_MPC8240
- "8240"
-#endif
-#ifdef CONFIG_MPC8245
- "8245"
-#endif
- " ##Test not implemented yet##\n");
- return 0;
-}
-
-#if 0 /* NOT USED */
-int checkflash (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("## Test not implemented yet ##\n");
-
- return (0);
-}
-#endif
-
-phys_size_t initdram (int board_type)
-{
- int m, row, col, bank, i;
- unsigned long start, end;
- uint32_t mccr1;
- uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
- uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
- uint8_t mber = 0;
-
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- if (i2c_reg_read (0x50, 2) != 0x04) return 0; /* Memory type */
- m = i2c_reg_read (0x50, 5); /* # of physical banks */
- row = i2c_reg_read (0x50, 3); /* # of rows */
- col = i2c_reg_read (0x50, 4); /* # of columns */
- bank = i2c_reg_read (0x50, 17); /* # of logical banks */
-
- CONFIG_READ_WORD(MCCR1, mccr1);
- mccr1 &= 0xffff0000;
-
- start = CONFIG_SYS_SDRAM_BASE;
- end = start + (1 << (col + row + 3) ) * bank - 1;
-
- for (i = 0; i < m; i++) {
- mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
- if (i < 4) {
- msar1 |= ((start >> 20) & 0xff) << i * 8;
- emsar1 |= ((start >> 28) & 0xff) << i * 8;
- mear1 |= ((end >> 20) & 0xff) << i * 8;
- emear1 |= ((end >> 28) & 0xff) << i * 8;
- } else {
- msar2 |= ((start >> 20) & 0xff) << (i-4) * 8;
- emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
- mear2 |= ((end >> 20) & 0xff) << (i-4) * 8;
- emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
- }
- mber |= 1 << i;
- start += (1 << (col + row + 3) ) * bank;
- end += (1 << (col + row + 3) ) * bank;
- }
- for (; i < 8; i++) {
- if (i < 4) {
- msar1 |= 0xff << i * 8;
- emsar1 |= 0x30 << i * 8;
- mear1 |= 0xff << i * 8;
- emear1 |= 0x30 << i * 8;
- } else {
- msar2 |= 0xff << (i-4) * 8;
- emsar2 |= 0x30 << (i-4) * 8;
- mear2 |= 0xff << (i-4) * 8;
- emear2 |= 0x30 << (i-4) * 8;
- }
- }
-
- CONFIG_WRITE_WORD(MCCR1, mccr1);
- CONFIG_WRITE_WORD(MSAR1, msar1);
- CONFIG_WRITE_WORD(EMSAR1, emsar1);
- CONFIG_WRITE_WORD(MEAR1, mear1);
- CONFIG_WRITE_WORD(EMEAR1, emear1);
- CONFIG_WRITE_WORD(MSAR2, msar2);
- CONFIG_WRITE_WORD(EMSAR2, emsar2);
- CONFIG_WRITE_WORD(MEAR2, mear2);
- CONFIG_WRITE_WORD(EMEAR2, emear2);
- CONFIG_WRITE_BYTE(MBER, mber);
-
- return (1 << (col + row + 3) ) * bank * m;
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_debris_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_debris_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
- pci_mpc824x_init(&hose);
-}
-
-void *nvram_read(void *dest, const long src, size_t count)
-{
- volatile uchar *d = (volatile uchar*) dest;
- volatile uchar *s = (volatile uchar*) src;
- while(count--) {
- *d++ = *s++;
- asm volatile("sync");
- }
- return dest;
-}
-
-void nvram_write(long dest, const void *src, size_t count)
-{
- volatile uchar *d = (volatile uchar*)dest;
- volatile uchar *s = (volatile uchar*)src;
- while(count--) {
- *d++ = *s++;
- asm volatile("sync");
- }
-}
-
-int misc_init_r(void)
-{
- uchar ethaddr[6];
-
- if (eth_getenv_enetaddr("ethaddr", ethaddr))
- /* Write ethernet addr in NVRAM for VxWorks */
- nvram_write(CONFIG_ENV_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS,
- ethaddr, 6);
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
+++ /dev/null
-/*
- * board/eva/flash.c
- *
- * (C) Copyright 2002
- * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-#include <mpc824x.h>
-#include <asm/mmu.h>
-
-int (*do_flash_erase)(flash_info_t*, uint32_t, uint32_t);
-int (*write_dword)(flash_info_t*, ulong, uint64_t);
-
-typedef uint64_t cfi_word;
-
-#define cfi_read(flash, addr) *((volatile cfi_word*)(flash->start[0] + addr))
-
-#define cfi_write(flash, val, addr) \
- move64((cfi_word*)&val, \
- (cfi_word*)(flash->start[0] + addr))
-
-#define CMD(x) ((((cfi_word)x)<<48)|(((cfi_word)x)<<32)|(((cfi_word)x)<<16)|(((cfi_word)x)))
-
-static void write32(unsigned long addr, uint32_t value)
-{
- *(volatile uint32_t*)(addr) = value;
- asm volatile("sync");
-}
-
-static uint32_t read32(unsigned long addr)
-{
- uint32_t value;
- value = *(volatile uint32_t*)addr;
- asm volatile("sync");
- return value;
-}
-
-static cfi_word cfi_cmd(flash_info_t *flash, uint8_t cmd, uint32_t addr)
-{
- uint32_t base = flash->start[0];
- uint32_t val=(cmd << 16) | cmd;
- addr <<= 3;
- write32(base + addr, val);
- return addr;
-}
-
-static uint16_t cfi_read_query(flash_info_t *flash, uint32_t addr)
-{
- uint32_t base = flash->start[0];
- addr <<= 3;
- return (uint16_t)read32(base + addr);
-}
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-static void move64(uint64_t *src, uint64_t *dest)
-{
- asm volatile("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
- "stfd 0, 0(4)" /* *dest = fpr0 */
- : : : "fr0" ); /* Clobbers fr0 */
- return;
-}
-
-static int cfi_write_dword(flash_info_t *flash, ulong dest, cfi_word data)
-{
- unsigned long start;
- cfi_word status = 0;
-
- status = cfi_read(flash, dest);
- data &= status;
-
- cfi_cmd(flash, 0x40, 0);
- cfi_write(flash, data, dest);
-
- udelay(10);
- start = get_timer (0);
- for(;;) {
- status = cfi_read(flash, dest);
- status &= CMD(0x80);
- if(status == CMD(0x80))
- break;
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- cfi_cmd(flash, 0xff, 0);
- return 1;
- }
- udelay(1);
- }
- cfi_cmd(flash, 0xff, 0);
-
- return 0;
-}
-
-static int jedec_write_dword (flash_info_t *flash, ulong dest, cfi_word data)
-{
- ulong start;
- cfi_word status = 0;
-
- status = cfi_read(flash, dest);
- if(status != CMD(0xffff)) return 2;
-
- cfi_cmd(flash, 0xaa, 0x555);
- cfi_cmd(flash, 0x55, 0x2aa);
- cfi_cmd(flash, 0xa0, 0x555);
-
- cfi_write(flash, data, dest);
-
- udelay(10);
- start = get_timer (0);
- status = ~data;
- while(status != data) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
- return 1;
- status = cfi_read(flash, dest);
- udelay(1);
- }
- return 0;
-}
-
-static __inline__ unsigned long get_msr(void)
-{
- unsigned long msr;
- __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
- __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
-}
-
-int write_buff (flash_info_t *flash, uchar *src, ulong addr, ulong cnt)
-{
- ulong wp;
- int i, s, l, rc;
- cfi_word data;
- uint8_t *t = (uint8_t*)&data;
- unsigned long base = flash->start[0];
- uint32_t msr;
-
- if (flash->flash_id == FLASH_UNKNOWN)
- return 4;
-
- if (cnt == 0)
- return 0;
-
- addr -= base;
-
- msr = get_msr();
- set_msr(msr|MSR_FP);
-
- wp = (addr & ~7); /* get lower word aligned address */
-
- if((addr-wp) != 0) {
- data = cfi_read(flash, wp);
- s = addr & 7;
- l = ( cnt < (8-s) ) ? cnt : (8-s);
- for(i = 0; i < l; i++)
- t[s+i] = *src++;
- if ((rc = write_dword(flash, wp, data)) != 0)
- goto DONE;
- wp += 8;
- cnt -= l;
- }
-
- while (cnt >= 8) {
- for (i = 0; i < 8; i++)
- t[i] = *src++;
- if ((rc = write_dword(flash, wp, data)) != 0)
- goto DONE;
- wp += 8;
- cnt -= 8;
- }
-
- if (cnt == 0) {
- rc = 0;
- goto DONE;
- }
-
- data = cfi_read(flash, wp);
- for(i = 0; i < cnt; i++)
- t[i] = *src++;
- rc = write_dword(flash, wp, data);
-DONE:
- set_msr(msr);
- return rc;
-}
-
-static int cfi_erase_oneblock(flash_info_t *flash, uint32_t sect)
-{
- int sa;
- int flag;
- ulong start, last, now;
- cfi_word status;
-
- flag = disable_interrupts();
-
- sa = (flash->start[sect] - flash->start[0]);
- write32(flash->start[sect], 0x00200020);
- write32(flash->start[sect], 0x00d000d0);
-
- if (flag)
- enable_interrupts();
-
- udelay(1000);
- start = get_timer (0);
- last = start;
-
- for (;;) {
- status = cfi_read(flash, sa);
- status &= CMD(0x80);
- if (status == CMD(0x80))
- break;
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- cfi_cmd(flash, 0xff, 0);
- printf ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- if ((now - last) > 1000) {
- serial_putc ('.');
- last = now;
- }
- udelay(10);
- }
- cfi_cmd(flash, 0xff, 0);
- return ERR_OK;
-}
-
-static int cfi_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
-{
- int sect;
- int rc = ERR_OK;
-
- for (sect = s_first; sect <= s_last; sect++) {
- if (flash->protect[sect] == 0) {
- rc = cfi_erase_oneblock(flash, sect);
- if (rc != ERR_OK) break;
- }
- }
- printf (" done\n");
- return rc;
-}
-
-static int jedec_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
-{
- int sect;
- cfi_word status;
- int sa = -1;
- int flag;
- ulong start, last, now;
-
- flag = disable_interrupts();
-
- cfi_cmd(flash, 0xaa, 0x555);
- cfi_cmd(flash, 0x55, 0x2aa);
- cfi_cmd(flash, 0x80, 0x555);
- cfi_cmd(flash, 0xaa, 0x555);
- cfi_cmd(flash, 0x55, 0x2aa);
- for ( sect = s_first; sect <= s_last; sect++) {
- if (flash->protect[sect] == 0) {
- sa = flash->start[sect] - flash->start[0];
- write32(flash->start[sect], 0x00300030);
- }
- }
- if (flag)
- enable_interrupts();
-
- if (sa < 0)
- goto DONE;
-
- udelay (1000);
- start = get_timer (0);
- last = start;
- for(;;) {
- status = cfi_read(flash, sa);
- if (status == CMD(0xffff))
- break;
-
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- if ((now - last) > 1000) {
- serial_putc ('.');
- last = now;
- }
- udelay(10);
- }
-DONE:
- cfi_cmd(flash, 0xf0, 0);
-
- printf (" done\n");
-
- return ERR_OK;
-}
-
-int flash_erase (flash_info_t *flash, int s_first, int s_last)
-{
- int sect;
- int prot;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (flash->flash_id == FLASH_UNKNOWN)
- printf ("- missing\n");
- else
- printf ("- no sectors to erase\n");
- return ERR_NOT_ERASED;
- }
- if (flash->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return ERR_NOT_ERASED;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; sect++)
- if (flash->protect[sect]) prot++;
-
- if (prot)
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- else
- printf ("\n");
-
- return do_flash_erase(flash, s_first, s_last);
-}
-
-struct jedec_flash_info {
- const uint16_t mfr_id;
- const uint16_t dev_id;
- const char *name;
- const int DevSize;
- const int InterfaceDesc;
- const int NumEraseRegions;
- const ulong regions[4];
-};
-
-#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
-
-#define SIZE_1MiB 20
-#define SIZE_2MiB 21
-#define SIZE_4MiB 22
-
-static const struct jedec_flash_info jedec_table[] = {
- {
- mfr_id: (uint16_t)AMD_MANUFACT,
- dev_id: (uint16_t)AMD_ID_LV800T,
- name: "AMD AM29LV800T",
- DevSize: SIZE_1MiB,
- NumEraseRegions: 4,
- regions: {ERASEINFO(0x10000,15),
- ERASEINFO(0x08000,1),
- ERASEINFO(0x02000,2),
- ERASEINFO(0x04000,1)
- }
- }, {
- mfr_id: (uint16_t)AMD_MANUFACT,
- dev_id: (uint16_t)AMD_ID_LV800B,
- name: "AMD AM29LV800B",
- DevSize: SIZE_1MiB,
- NumEraseRegions: 4,
- regions: {ERASEINFO(0x10000,15),
- ERASEINFO(0x08000,1),
- ERASEINFO(0x02000,2),
- ERASEINFO(0x04000,1)
- }
- }, {
- mfr_id: (uint16_t)AMD_MANUFACT,
- dev_id: (uint16_t)AMD_ID_LV160T,
- name: "AMD AM29LV160T",
- DevSize: SIZE_2MiB,
- NumEraseRegions: 4,
- regions: {ERASEINFO(0x10000,31),
- ERASEINFO(0x08000,1),
- ERASEINFO(0x02000,2),
- ERASEINFO(0x04000,1)
- }
- }, {
- mfr_id: (uint16_t)AMD_MANUFACT,
- dev_id: (uint16_t)AMD_ID_LV160B,
- name: "AMD AM29LV160B",
- DevSize: SIZE_2MiB,
- NumEraseRegions: 4,
- regions: {ERASEINFO(0x04000,1),
- ERASEINFO(0x02000,2),
- ERASEINFO(0x08000,1),
- ERASEINFO(0x10000,31)
- }
- }, {
- mfr_id: (uint16_t)AMD_MANUFACT,
- dev_id: (uint16_t)AMD_ID_LV320T,
- name: "AMD AM29LV320T",
- DevSize: SIZE_4MiB,
- NumEraseRegions: 2,
- regions: {ERASEINFO(0x10000,63),
- ERASEINFO(0x02000,8)
- }
-
- }, {
- mfr_id: (uint16_t)AMD_MANUFACT,
- dev_id: (uint16_t)AMD_ID_LV320B,
- name: "AMD AM29LV320B",
- DevSize: SIZE_4MiB,
- NumEraseRegions: 2,
- regions: {ERASEINFO(0x02000,8),
- ERASEINFO(0x10000,63)
- }
- }
-};
-
-static ulong cfi_init(uint32_t base, flash_info_t *flash)
-{
- int sector;
- int block;
- int block_count;
- int offset = 0;
- int reverse = 0;
- int primary;
- int mfr_id;
- int dev_id;
-
- flash->start[0] = base;
- cfi_cmd(flash, 0xF0, 0);
- cfi_cmd(flash, 0x98, 0);
- if ( !( cfi_read_query(flash, 0x10) == 'Q' &&
- cfi_read_query(flash, 0x11) == 'R' &&
- cfi_read_query(flash, 0x12) == 'Y' )) {
- cfi_cmd(flash, 0xff, 0);
- return 0;
- }
-
- flash->size = 1 << cfi_read_query(flash, 0x27);
- flash->size *= 4;
- block_count = cfi_read_query(flash, 0x2c);
- primary = cfi_read_query(flash, 0x15);
- if ( cfi_read_query(flash, primary + 4) == 0x30)
- reverse = (cfi_read_query(flash, 0x1) & 0x01);
- else
- reverse = (cfi_read_query(flash, primary+15) == 3);
-
- flash->sector_count = 0;
-
- for ( block = reverse ? block_count - 1 : 0;
- reverse ? block >= 0 : block < block_count;
- reverse ? block-- : block ++) {
- int sector_size =
- (cfi_read_query(flash, 0x2d + block*4+2) |
- (cfi_read_query(flash, 0x2d + block*4+3) << 8)) << 8;
- int sector_count =
- (cfi_read_query(flash, 0x2d + block*4+0) |
- (cfi_read_query(flash, 0x2d + block*4+1) << 8)) + 1;
- for(sector = 0; sector < sector_count; sector++) {
- flash->start[flash->sector_count++] = base + offset;
- offset += sector_size * 4;
- }
- }
- mfr_id = cfi_read_query(flash, 0x00);
- dev_id = cfi_read_query(flash, 0x01);
-
- cfi_cmd(flash, 0xff, 0);
-
- flash->flash_id = (mfr_id << 16) | dev_id;
-
- for (sector = 0; sector < flash->sector_count; sector++) {
- write32(flash->start[sector], 0x00600060);
- write32(flash->start[sector], 0x00d000d0);
- }
- cfi_cmd(flash, 0xff, 0);
-
- for (sector = 0; sector < flash->sector_count; sector++)
- flash->protect[sector] = 0;
-
- do_flash_erase = cfi_erase;
- write_dword = cfi_write_dword;
-
- return flash->size;
-}
-
-static ulong jedec_init(unsigned long base, flash_info_t *flash)
-{
- int i;
- int block, block_count;
- int sector, offset;
- int mfr_id, dev_id;
- flash->start[0] = base;
- cfi_cmd(flash, 0xF0, 0x000);
- cfi_cmd(flash, 0xAA, 0x555);
- cfi_cmd(flash, 0x55, 0x2AA);
- cfi_cmd(flash, 0x90, 0x555);
- mfr_id = cfi_read_query(flash, 0x000);
- dev_id = cfi_read_query(flash, 0x0001);
- cfi_cmd(flash, 0xf0, 0x000);
-
- for(i=0; i<sizeof(jedec_table)/sizeof(struct jedec_flash_info); i++) {
- if((jedec_table[i].mfr_id == mfr_id) &&
- (jedec_table[i].dev_id == dev_id)) {
-
- flash->flash_id = (mfr_id << 16) | dev_id;
- flash->size = 1 << jedec_table[0].DevSize;
- flash->size *= 4;
- block_count = jedec_table[i].NumEraseRegions;
- offset = 0;
- flash->sector_count = 0;
- for (block = 0; block < block_count; block++) {
- int sector_size = jedec_table[i].regions[block];
- int sector_count = (sector_size & 0xff) + 1;
- sector_size >>= 8;
- for (sector=0; sector<sector_count; sector++) {
- flash->start[flash->sector_count++] =
- base + offset;
- offset += sector_size * 4;
- }
- }
- break;
- }
- }
-
- for (sector = 0; sector < flash->sector_count; sector++)
- flash->protect[sector] = 0;
-
- do_flash_erase = jedec_erase;
- write_dword = jedec_write_dword;
-
- return flash->size;
-}
-
-inline void mtibat1u(unsigned int x)
-{
- __asm__ __volatile__ ("mtspr 530, %0" :: "r" (x));
-}
-
-inline void mtibat1l(unsigned int x)
-{
- __asm__ __volatile__ ("mtspr 531, %0" :: "r" (x));
-}
-
-inline void mtdbat1u(unsigned int x)
-{
- __asm__ __volatile__ ("mtspr 538, %0" :: "r" (x));
-}
-
-inline void mtdbat1l(unsigned int x)
-{
- __asm__ __volatile__ ("mtspr 539, %0" :: "r" (x));
-}
-
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- int i;
- unsigned int msr;
-
- /* BAT1 */
- CONFIG_WRITE_WORD(ERCR3, 0x0C00000C);
- CONFIG_WRITE_WORD(ERCR4, 0x0800000C);
- msr = get_msr();
- set_msr(msr & ~(MSR_IR | MSR_DR));
- mtibat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
- mtibat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
- mtdbat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
- mtdbat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
- set_msr(msr);
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- flash_info[i].flash_id = FLASH_UNKNOWN;
- size = cfi_init(FLASH_BASE0_PRELIM, &flash_info[0]);
- if (!size)
- size = jedec_init(FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN)
- printf ("# Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
- size, size<<20);
-
- return size;
-}
-
-void flash_print_info (flash_info_t *flash)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *p;
-
- if (flash->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- flash_init();
- }
-
- if (flash->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (((flash->flash_id) >> 16) & 0xff) {
- case 0x01:
- printf ("AMD ");
- break;
- case 0x04:
- printf("FUJITSU ");
- break;
- case 0x20:
- printf("STM ");
- break;
- case 0xBF:
- printf("SST ");
- break;
- case 0x89:
- case 0xB0:
- printf("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch ((flash->flash_id) & 0xffff) {
- case (uint16_t)AMD_ID_LV800T:
- printf ("AM29LV800T\n");
- break;
- case (uint16_t)AMD_ID_LV800B:
- printf ("AM29LV800B\n");
- break;
- case (uint16_t)AMD_ID_LV160T:
- printf ("AM29LV160T\n");
- break;
- case (uint16_t)AMD_ID_LV160B:
- printf ("AM29LV160B\n");
- break;
- case (uint16_t)AMD_ID_LV320T:
- printf ("AM29LV320T\n");
- break;
- case (uint16_t)AMD_ID_LV320B:
- printf ("AM29LV320B\n");
- break;
- case (uint16_t)INTEL_ID_28F800C3T:
- printf ("28F800C3T\n");
- break;
- case (uint16_t)INTEL_ID_28F800C3B:
- printf ("28F800C3B\n");
- break;
- case (uint16_t)INTEL_ID_28F160C3T:
- printf ("28F160C3T\n");
- break;
- case (uint16_t)INTEL_ID_28F160C3B:
- printf ("28F160C3B\n");
- break;
- case (uint16_t)INTEL_ID_28F320C3T:
- printf ("28F320C3T\n");
- break;
- case (uint16_t)INTEL_ID_28F320C3B:
- printf ("28F320C3B\n");
- break;
- case (uint16_t)INTEL_ID_28F640C3T:
- printf ("28F640C3T\n");
- break;
- case (uint16_t)INTEL_ID_28F640C3B:
- printf ("28F640C3B\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- if (flash->size >= (1 << 20)) {
- printf (" Size: %ld MB in %d Sectors\n",
- flash->size >> 20, flash->sector_count);
- } else {
- printf (" Size: %ld kB in %d Sectors\n",
- flash->size >> 10, flash->sector_count);
- }
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < flash->sector_count; ++i) {
- /* Check if whole sector is erased*/
- if (i != (flash->sector_count-1))
- size = flash->start[i+1] - flash->start[i];
- else
- size = flash->start[0] + flash->size - flash->start[i];
-
- erased = 1;
- p = (volatile unsigned long *)flash->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++) {
- if (*p++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
-
- printf (" %08lX%s%s",
- flash->start[i],
- erased ? " E" : " ",
- flash->protect[i] ? "RO " : " ");
- }
- printf ("\n");
-}
+++ /dev/null
-/*
- * board/eva/phantom.c
- *
- * Phantom RTC device driver for EVA
- *
- * Author: Sangmoon Kim
- * dogoil@etinsys.com
- *
- * Copyright 2002 Etinsys Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <rtc.h>
-
-#if defined(CONFIG_CMD_DATE)
-
-#define RTC_BASE (CONFIG_SYS_NVRAM_BASE_ADDR + 0x7fff8)
-
-#define RTC_YEAR ( RTC_BASE + 7 )
-#define RTC_MONTH ( RTC_BASE + 6 )
-#define RTC_DAY_OF_MONTH ( RTC_BASE + 5 )
-#define RTC_DAY_OF_WEEK ( RTC_BASE + 4 )
-#define RTC_HOURS ( RTC_BASE + 3 )
-#define RTC_MINUTES ( RTC_BASE + 2 )
-#define RTC_SECONDS ( RTC_BASE + 1 )
-#define RTC_CENTURY ( RTC_BASE + 0 )
-
-#define RTC_CONTROLA RTC_CENTURY
-#define RTC_CONTROLB RTC_SECONDS
-#define RTC_CONTROLC RTC_DAY_OF_WEEK
-
-#define RTC_CA_WRITE 0x80
-#define RTC_CA_READ 0x40
-
-#define RTC_CB_OSC_DISABLE 0x80
-
-#define RTC_CC_BATTERY_FLAG 0x80
-#define RTC_CC_FREQ_TEST 0x40
-
-
-static int phantom_flag = -1;
-static int century_flag = -1;
-
-static uchar rtc_read(unsigned int addr)
-{
- return *(volatile unsigned char *)(addr);
-}
-
-static void rtc_write(unsigned int addr, uchar val)
-{
- *(volatile unsigned char *)(addr) = val;
-}
-
-static unsigned char phantom_rtc_sequence[] = {
- 0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
-};
-
-static unsigned char* phantom_rtc_read(int addr, unsigned char rtc[8])
-{
- int i, j;
- unsigned char v;
- unsigned char save = rtc_read(addr);
-
- for (j = 0; j < 8; j++) {
- v = phantom_rtc_sequence[j];
- for (i = 0; i < 8; i++) {
- rtc_write(addr, v & 1);
- v >>= 1;
- }
- }
- for (j = 0; j < 8; j++) {
- v = 0;
- for (i = 0; i < 8; i++) {
- if(rtc_read(addr) & 1)
- v |= 1 << i;
- }
- rtc[j] = v;
- }
- rtc_write(addr, save);
- return rtc;
-}
-
-static void phantom_rtc_write(int addr, unsigned char rtc[8])
-{
- int i, j;
- unsigned char v;
- unsigned char save = rtc_read(addr);
- for (j = 0; j < 8; j++) {
- v = phantom_rtc_sequence[j];
- for (i = 0; i < 8; i++) {
- rtc_write(addr, v & 1);
- v >>= 1;
- }
- }
- for (j = 0; j < 8; j++) {
- v = rtc[j];
- for (i = 0; i < 8; i++) {
- rtc_write(addr, v & 1);
- v >>= 1;
- }
- }
- rtc_write(addr, save);
-}
-
-static int get_phantom_flag(void)
-{
- int i;
- unsigned char rtc[8];
-
- phantom_rtc_read(RTC_BASE, rtc);
-
- for(i = 1; i < 8; i++) {
- if (rtc[i] != rtc[0])
- return 1;
- }
- return 0;
-}
-
-void rtc_reset(void)
-{
- if (phantom_flag < 0)
- phantom_flag = get_phantom_flag();
-
- if (phantom_flag) {
- unsigned char rtc[8];
- phantom_rtc_read(RTC_BASE, rtc);
- if(rtc[4] & 0x30) {
- printf( "real-time-clock was stopped. Now starting...\n" );
- rtc[4] &= 0x07;
- phantom_rtc_write(RTC_BASE, rtc);
- }
- } else {
- uchar reg_a, reg_b, reg_c;
- reg_a = rtc_read( RTC_CONTROLA );
- reg_b = rtc_read( RTC_CONTROLB );
-
- if ( reg_b & RTC_CB_OSC_DISABLE )
- {
- printf( "real-time-clock was stopped. Now starting...\n" );
- reg_a |= RTC_CA_WRITE;
- reg_b &= ~RTC_CB_OSC_DISABLE;
- rtc_write( RTC_CONTROLA, reg_a );
- rtc_write( RTC_CONTROLB, reg_b );
- }
-
- /* make sure read/write clock register bits are cleared */
- reg_a &= ~( RTC_CA_WRITE | RTC_CA_READ );
- rtc_write( RTC_CONTROLA, reg_a );
-
- reg_c = rtc_read( RTC_CONTROLC );
- if (( reg_c & RTC_CC_BATTERY_FLAG ) == 0 )
- printf( "RTC battery low. Clock setting may not be reliable.\n");
- }
-}
-
-static int get_century_flag(void)
-{
- int flag = 0;
- int bcd, century;
- bcd = rtc_read( RTC_CENTURY );
- century = bcd2bin( bcd & 0x3F );
- rtc_write( RTC_CENTURY, bin2bcd(century+1));
- if (bcd == rtc_read( RTC_CENTURY ))
- flag = 1;
- rtc_write( RTC_CENTURY, bcd);
- return flag;
-}
-
-int rtc_get( struct rtc_time *tmp)
-{
- if (phantom_flag < 0)
- phantom_flag = get_phantom_flag();
-
- if (phantom_flag)
- {
- unsigned char rtc[8];
-
- phantom_rtc_read(RTC_BASE, rtc);
-
- tmp->tm_sec = bcd2bin(rtc[1] & 0x7f);
- tmp->tm_min = bcd2bin(rtc[2] & 0x7f);
- tmp->tm_hour = bcd2bin(rtc[3] & 0x1f);
- tmp->tm_wday = bcd2bin(rtc[4] & 0x7);
- tmp->tm_mday = bcd2bin(rtc[5] & 0x3f);
- tmp->tm_mon = bcd2bin(rtc[6] & 0x1f);
- tmp->tm_year = bcd2bin(rtc[7]) + 1900;
- tmp->tm_yday = 0;
- tmp->tm_isdst = 0;
-
- if( (rtc[3] & 0x80) && (rtc[3] & 0x40) ) tmp->tm_hour += 12;
- if (tmp->tm_year < 1970) tmp->tm_year += 100;
- } else {
- uchar sec, min, hour;
- uchar mday, wday, mon, year;
-
- int century;
-
- uchar reg_a;
-
- if (century_flag < 0)
- century_flag = get_century_flag();
-
- reg_a = rtc_read( RTC_CONTROLA );
- /* lock clock registers for read */
- rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_READ ));
-
- sec = rtc_read( RTC_SECONDS );
- min = rtc_read( RTC_MINUTES );
- hour = rtc_read( RTC_HOURS );
- mday = rtc_read( RTC_DAY_OF_MONTH );
- wday = rtc_read( RTC_DAY_OF_WEEK );
- mon = rtc_read( RTC_MONTH );
- year = rtc_read( RTC_YEAR );
- century = rtc_read( RTC_CENTURY );
-
- /* unlock clock registers after read */
- rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_READ ));
-
- tmp->tm_sec = bcd2bin( sec & 0x7F );
- tmp->tm_min = bcd2bin( min & 0x7F );
- tmp->tm_hour = bcd2bin( hour & 0x3F );
- tmp->tm_mday = bcd2bin( mday & 0x3F );
- tmp->tm_mon = bcd2bin( mon & 0x1F );
- tmp->tm_wday = bcd2bin( wday & 0x07 );
-
- if (century_flag) {
- tmp->tm_year = bcd2bin( year ) +
- ( bcd2bin( century & 0x3F ) * 100 );
- } else {
- tmp->tm_year = bcd2bin( year ) + 1900;
- if (tmp->tm_year < 1970) tmp->tm_year += 100;
- }
-
- tmp->tm_yday = 0;
- tmp->tm_isdst= 0;
- }
-
- return 0;
-}
-
-int rtc_set( struct rtc_time *tmp )
-{
- if (phantom_flag < 0)
- phantom_flag = get_phantom_flag();
-
- if (phantom_flag) {
- uint year;
- unsigned char rtc[8];
-
- year = tmp->tm_year;
- year -= (year < 2000) ? 1900 : 2000;
-
- rtc[0] = bin2bcd(0);
- rtc[1] = bin2bcd(tmp->tm_sec);
- rtc[2] = bin2bcd(tmp->tm_min);
- rtc[3] = bin2bcd(tmp->tm_hour);
- rtc[4] = bin2bcd(tmp->tm_wday);
- rtc[5] = bin2bcd(tmp->tm_mday);
- rtc[6] = bin2bcd(tmp->tm_mon);
- rtc[7] = bin2bcd(year);
-
- phantom_rtc_write(RTC_BASE, rtc);
- } else {
- uchar reg_a;
- if (century_flag < 0)
- century_flag = get_century_flag();
-
- /* lock clock registers for write */
- reg_a = rtc_read( RTC_CONTROLA );
- rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_WRITE ));
-
- rtc_write( RTC_MONTH, bin2bcd( tmp->tm_mon ));
-
- rtc_write( RTC_DAY_OF_WEEK, bin2bcd( tmp->tm_wday ));
- rtc_write( RTC_DAY_OF_MONTH, bin2bcd( tmp->tm_mday ));
- rtc_write( RTC_HOURS, bin2bcd( tmp->tm_hour ));
- rtc_write( RTC_MINUTES, bin2bcd( tmp->tm_min ));
- rtc_write( RTC_SECONDS, bin2bcd( tmp->tm_sec ));
-
- /* break year up into century and year in century */
- if (century_flag) {
- rtc_write( RTC_YEAR, bin2bcd( tmp->tm_year % 100 ));
- rtc_write( RTC_CENTURY, bin2bcd( tmp->tm_year / 100 ));
- reg_a &= 0xc0;
- reg_a |= bin2bcd( tmp->tm_year / 100 );
- } else {
- rtc_write(RTC_YEAR, bin2bcd(tmp->tm_year -
- ((tmp->tm_year < 2000) ? 1900 : 2000)));
- }
-
- /* unlock clock registers after read */
- rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_WRITE ));
- }
-
- return 0;
-}
-
-#endif
Orphan powerpc mpc5xxx - matrix_vision mvbc_p MVBC_P MVBC_P:MVBC_P Andre Schwarz <andre.schwarz@matrix-vision.de>
Orphan powerpc mpc5xxx - matrix_vision mvsmr MVSMR - Andre Schwarz <andre.schwarz@matrix-vision.de>
Orphan powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso <yusdi_santoso@adaptec.com>
-Orphan powerpc mpc824x - etin - debris - Sangmoon Kim <dogoil@etinsys.com>
Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK - Anton Vorontsov <avorontsov@ru.mvista.com>
Orphan powerpc mpc83xx - freescale mpc8360erdk MPC8360ERDK_33 MPC8360ERDK:CLKIN_33MHZ Anton Vorontsov <avorontsov@ru.mvista.com>
Orphan powerpc mpc83xx - matrix_vision mergerbox MERGERBOX - Andre Schwarz <andre.schwarz@matrix-vision.de>
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+debris powerpc mpc824x - - Sangmoon Kim <dogoil@etinsys.com>
kvme080 powerpc mpc824x - - Sangmoon Kim <dogoil@etinsys.com>
ep8248 powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com>
ispan powerpc mpc8260 - - Yuli Barcohen <yuli@arabellasw.com>
+++ /dev/null
-/*
- * (C) Copyright 2001, 2002
- * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-/* Environments */
-
-/* bootargs */
-#define CONFIG_BOOTARGS \
- "console=ttyS0,9600 init=/linuxrc " \
- "root=/dev/nfs rw nfsroot=192.168.0.1:" \
- "/tftpboot/target " \
- "ip=192.168.0.2:192.168.0.1:192.168.0.1:" \
- "255.255.255.0:debris:eth0:none " \
- "mtdparts=phys:12m(root),-(kernel)"
-
-/* bootcmd */
-#define CONFIG_BOOTCOMMAND \
- "tftp 800000 pImage; " \
- "setenv bootargs console=ttyS0,9600 init=/linuxrc " \
- "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:eth0:none " \
- "mtdparts=phys:12m(root),-(kernel); " \
- "bootm 800000"
-
-/* bootdelay */
-#define CONFIG_BOOTDELAY 5 /* autoboot 5s */
-
-/* baudrate */
-#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */
-
-/* loads_echo */
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
-
-/* ethaddr */
-#undef CONFIG_ETHADDR
-
-/* eth2addr */
-#undef CONFIG_ETH2ADDR
-
-/* eth3addr */
-#undef CONFIG_ETH3ADDR
-
-/* ipaddr */
-#define CONFIG_IPADDR 192.168.0.2
-
-/* serverip */
-#define CONFIG_SERVERIP 192.168.0.1
-
-/* autoload */
-#undef CONFIG_SYS_AUTOLOAD
-
-/* rootpath */
-#define CONFIG_ROOTPATH "/tftpboot/target"
-
-/* gatewayip */
-#define CONFIG_GATEWAYIP 192.168.0.1
-
-/* netmask */
-#define CONFIG_NETMASK 255.255.255.0
-
-/* hostname */
-#define CONFIG_HOSTNAME debris
-
-/* bootfile */
-#define CONFIG_BOOTFILE "pImage"
-
-/* loadaddr */
-#define CONFIG_LOADADDR 800000
-
-/* preboot */
-#undef CONFIG_PREBOOT
-
-/* clocks_in_mhz */
-#undef CONFIG_CLOCKS_IN_MHZ
-
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_DEBRIS 1
-
-#if 0
-#define USE_DINK32 1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_DRAM_SPEED 100 /* MHz */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE 0x00090000
-#define CONFIG_SYS_RAMBOOT 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0x7C000000
-#define CONFIG_SYS_FLASH_SIZE (16*1024*1024) /* debris has tiny eeprom */
-
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
-#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000
-#define FLASH_BASE0_PRELIM 0x7C000000 /* debris flash */
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-
-/* Use first bank for JFFS2, second bank contains U-Boot.
- *
- * Note: fake mtd_id's used, no linux mtd map file.
- */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=debris-0"
-#define MTDPARTS_DEFAULT "mtdparts=debris-0:-(jffs2)"
-*/
-
-#define CONFIG_ENV_IS_IN_NVRAM 1
-#define CONFIG_ENV_OVERWRITE 1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR 0xFF000000 /* right at the start of NVRAM */
-#define CONFIG_ENV_SIZE 0x400 /* Size of the Environment - 8K */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR 0xff000000
-
-/*
- * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS =
- * NV_RAM_ADDRS + NV_BOOT_OFFSET + NV_ENET_OFFSET
- */
-#define CONFIG_SYS_NVRAM_VXWORKS_OFFS 0x6900
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly. Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK 7372800
-
-#define CONFIG_SYS_NS16550_COM1 0xFF080000
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_NS16550_COM1 + 8)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_NS16550_COM1 + 16)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_NS16550_COM1 + 24)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 3
-
-#define CONFIG_SYS_DLL_EXTEND 0x00
-#define CONFIG_SYS_PCI_HOLD_DEL 0x20
-
-#define CONFIG_SYS_ROMNAL 15 /* rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 31 /* rom/flash access time */
-
-#define CONFIG_SYS_REFINT 430 /* # of clocks between CBR refresh cycles */
-
-#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#if 0
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
-#endif
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (0x4000000 - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x04000000
-#define CONFIG_SYS_BANK1_END (0x8000000 - 1)
-#define CONFIG_SYS_BANK1_ENABLE 1
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#define CONFIG_SYS_ODCR 0x75 /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-#endif /* __CONFIG_H */
projects / u-boot / commitdiff