sunxi: Enable both ehci and otg in host mode on various boards

Now that the device-model port of the musb mode makes it possible, enable
both the ehci and otg in host mode on boards where the musb is wired up in
host only mode, either via an usb-a receptacle or via an usb <-> sata
converter.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index b92b6a3df08c90d825701d1583a3e5adf3b588c9..fe88a7b29f61bbc7d4648f97af94b449efaa69d2 100644 (file)
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -15,3 +15,4 @@ CONFIG_ETH_DESIGNWARE=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y

diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index f32a9675d495f86d0680606f2ed91b1e09554e8f..ffc8d9b7bd29a1e0c047f656bd8010d67076fa31 100644 (file)
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -17,3 +17,4 @@ CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y

diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index d7d74a9f08ff42809ac1a156b8928ec35d887294..c721c8774226bb293887673ac4ab2f313e3b08c9 100644 (file)
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"

diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index d944ae993efd6fd063ec39ce455d1565eb55c709..ae302c544e4770322d21dfcef7a79a96da29006c 100644 (file)
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -12,3 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"