ARM: Add Apollon UBI support

To enable UBI on Apollon you need to uncomment the CONFIG_SYS_USE_UBI
macro.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/board/apollon/Makefile b/board/apollon/Makefile
index 9bac9a6c0abb4bbeaf3c0b3cab6de18cce0c6bca..f20de3c938130c4e7528e365c94c0e3cdb136769 100644 (file)
--- a/board/apollon/Makefile
+++ b/board/apollon/Makefile
@@ -25,9 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(BOARD).a
 
-COBJS  := apollon.o mem.o sys_info.o
+COBJS-y        := apollon.o mem.o sys_info.o
 SOBJS  := lowlevel_init.o
 
+COBJS  := $(COBJS-y)
 SRCS   := $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS   := $(addprefix $(obj),$(COBJS))
 SOBJS  := $(addprefix $(obj),$(SOBJS))

diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index d71ed44fcdf196a288c33309d72633bcd444060a..dff47fc6a6cff12e1f76dec1a823ba2a02bea7d8 100644 (file)
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -53,6 +53,9 @@
 #define CONFIG_SYS_USE_NOR             1
 #endif
 
+/* uncommnet if you want to use UBI */
+#define CONFIG_SYS_USE_UBI
+
 #include <asm/arch/omap2420.h> /* get chip and board defs */
 
 #define        V_SCLK  12000000
@@ -73,8 +76,9 @@
  * Size of malloc() pool
  */
 #define        CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
-#define        CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + SZ_128K)
-#define        CONFIG_SYS_GBL_DATA_SIZE        128     /* bytes reserved for initial data */
+#define        CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + SZ_1M)
+/* bytes reserved for initial data */
+#define        CONFIG_SYS_GBL_DATA_SIZE        128
 
 /*
  * Hardware drivers
@@ -116,6 +120,13 @@
 #define        CONFIG_CMD_DIAG
 #define        CONFIG_CMD_ONENAND
 
+#ifdef CONFIG_SYS_USE_UBI
+#define        CONFIG_CMD_JFFS2
+#define        CONFIG_CMD_UBI
+#define        CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#endif
+
 #undef CONFIG_CMD_AUTOSCRIPT
 
 #ifndef        CONFIG_SYS_USE_NOR
@@ -133,24 +144,39 @@
 #define        CONFIG_BOOTFILE "uImage"
 #define        CONFIG_ETHADDR  00:0E:99:00:24:20
 
-#ifdef CONFIG_APOLLON_PLUS
-# define       CONFIG_BOOTARGS "root=/dev/nfs rw mem=64M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#ifdef CONFIG_APOLLON_PLUS
+#define CONFIG_SYS_MEM "mem=64M"
+#else
+#define CONFIG_SYS_MEM "mem=128"
+#endif
+
+#ifdef CONFIG_SYS_USE_UBI
+#define CONFIG_SYS_UBI "ubi.mtd=4"
 #else
-# define       CONFIG_BOOTARGS "root=/dev/nfs rw mem=128M console=ttyS0,115200n8 ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2"
+#define CONFIG_SYS_UBI ""
 #endif
 
+#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \
+       " console=ttyS0,115200n8" \
+       " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \
+       "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \
+       CONFIG_SYS_UBI
+
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "Image=tftp 0x80008000 Image; go 0x80008000\0"                  \
        "zImage=tftp 0x80180000 zImage; go 0x80180000\0"                \
        "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0"             \
        "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0"             \
-       "xloader=tftp 0x80180000 x-load.bin; cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"        \
+       "xloader=tftp 0x80180000 x-load.bin; "                          \
+       " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0"           \
        "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0"    \
        "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0"      \
        "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0"  \
-       "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0"\
+       "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \
        "onesyncboot=run syncmode oneboot\0"                            \
-       "updateb=tftp 0x80180000 u-boot-onenand.bin; onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0"                                 \
+       "updateb=tftp 0x80180000 u-boot-onenand.bin; "                  \
+       " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \
+       "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \
        "bootcmd=run uboot\0"
 
 /*
@@ -164,14 +190,15 @@
 /* Print Buffer Size */
 #define        CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define        CONFIG_SYS_MAXARGS      16      /* max number of command args */
-#define        CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-
-#define        CONFIG_SYS_MEMTEST_START        (OMAP2420_SDRC_CS0)     /* memtest works on */
+/* Boot Argument Buffer Size */
+#define        CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define        CONFIG_SYS_MEMTEST_START        (OMAP2420_SDRC_CS0)
 #define        CONFIG_SYS_MEMTEST_END          (OMAP2420_SDRC_CS0+SZ_31M)
 
 #undef CONFIG_SYS_CLKS_IN_HZ   /* everything, incl board info, in Hz */
-
-#define        CONFIG_SYS_LOAD_ADDR    (OMAP2420_SDRC_CS0)     /* default load address */
+/* default load address */
+#define        CONFIG_SYS_LOAD_ADDR    (OMAP2420_SDRC_CS0)
 
 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
  * or by 32KHz clk, or from external sig. This rate is divided by a local
@@ -211,13 +238,15 @@
 # define       CONFIG_SYS_MAX_FLASH_BANKS      1
 # define       CONFIG_SYS_MAX_FLASH_SECT       1024
 /*-----------------------------------------------------------------------
-
  * CFI FLASH driver setup
  */
-# define       CONFIG_SYS_FLASH_CFI    1       /* Flash memory is CFI compliant */
+/* Flash memory is CFI compliant */
+# define       CONFIG_SYS_FLASH_CFI    1
 # define       CONFIG_FLASH_CFI_DRIVER 1       /* Use drivers/cfi_flash.c */
-/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
-# define       CONFIG_SYS_FLASH_PROTECTION     1       /* Use h/w sector protection*/
+/* Use buffered writes (~10x faster) */
+/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */
+/* Use h/w sector protection*/
+# define       CONFIG_SYS_FLASH_PROTECTION     1
 
 #else  /* !CONFIG_SYS_USE_NOR */
 # define       CONFIG_SYS_NO_FLASH     1
@@ -228,4 +257,15 @@
 #define        CONFIG_ENV_IS_IN_ONENAND        1
 #define CONFIG_ENV_ADDR                0x00020000
 
+#ifdef CONFIG_SYS_USE_UBI
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT         "onenand0=onenand"
+#define MTDPARTS_DEFAULT       "mtdparts=onenand:128k(bootloader),"    \
+                                       "128k(params),"                 \
+                                       "2m(kernel),"                   \
+                                       "16m(rootfs),"                  \
+                                       "32m(fs),"                      \
+                                       "-(ubifs)"
+#endif
+
 #endif /* __CONFIG_H */